Keeson Technology DSDDCSY002 Remote Control Transmitter for Bed User Manual manual

Jiaxing Shufude Electric Bed Co., Ltd. Remote Control Transmitter for Bed manual

manual

User manual of the Remote controller Model Name: DS-DDCSY002 Press ON/OFF button: foot or head massage unit will start or stop Press TIMER button: set the massage intervals with each press of the button (10, 20, 30 min). when the timing is over. All massage motor will automatically stop. Press ALL OFF button: All the massage motors will stop working. Press HEAD button: control the rise and fall of the headboard. Press FEET button: control the rise and fall of the footboard. Press FLAT button: under any position, the bed will return the flat position. Press FLOATING button: under any position, the bed will return the FLOATING position. Press TV/PC button: under any position, the bed will return the TV/PC position. Press LONGE button: under any position, the bed will return the LONGE position. Press +/-: adjust the vibrating strength. Adjust Frequency: Manually select the frequency of code automatically. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Safety Caution Statement： This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Navigation menu