Keeson Technology MC122 CONTROL BOX User Manual MC122
Keeson Technology Corporation Limited CONTROL BOX MC122
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4099463 |
| Application ID | kvA9tK3cuP71rYcmJaw2xA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 31.55kB (394384 bits) |
| Date Submitted | 2018-12-08 00:00:00 |
| Date Available | 2018-12-08 00:00:00 |
| Creation Date | 2018-10-20 17:59:18 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2018-12-08 11:30:47 |
| Document Title | Microsoft Word - MC122_User Manual |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | baclsh51 |
Issue department：Bedding Division ProductFunction instruction Date： Author： 2018-10-12 Aaron No：MC122 Version： 1.1 Page 1 of 3 MC122 MC122Function instruction 1. Electrical configuration diagram： FCC: WKZRF358A IC: 20840-RF358A Massage motor control box FCC ID: 2AK23MC122 IC:22406-MC122 Foot Motor Head Motor Power cord AC Power Supply 2. Function Picture 3. Process of test 3.1. HEAD port Connect to head actuator,control by remote single: Click head up button on the remote, head actuator moves out, stop when released； Click headdown button，head actuator moves in, stop when released； This function takes effect only by pressing the corresponding button on the remote. Issue department：Bedding Division ProductFunction instruction Date： Author： 2018-10-12 Aaron No：MC122 Version： 1.1 Page 2 of 3 MC122 3.2. FOOTport Connect to foot actuator,control by remote single: Click foot up button，foot actuator moves out，stop when released； Click foot down button，foot actuator moves in，stop when released； This function takes effect only by pressing the corresponding button on the remote. 3.3. Massage Connect to head massage,control by remote: Click head massage + button,head massage strengthens by one level; Click head massage ‐ button,head massage weakenby one level; This function takes effect only by pressing the corresponding button on the remote. 3.4. MULTIFUNCTION port Connect with the same other Control box or Other accessories; 3.5. Power LED& PAIRING LED Power supply for control box, PAIRINGLED of control box flashes for 4 times,and then turns off, POWER LED turns on。 3.6. Power Connect to the 29V DC; 3.7. Pair Function Power up control box，pairing LED will be flash，the control box enters into mode of code paring； Press and hold the paring LED of Remote, the backlight of paring LED flashes, the backlight of remote flashes, the remote enters into mode of code paring; The backlight of paring LED of remote stops flashing, and the paring led of control box stop flash, it indicates that the code paring is successful; If fails, repeat all the processes above; Issue department：Bedding Division ProductFunction instruction Date： Author： 2018-10-12 Aaron No：MC122 Version： 1.1 Page 3 of 3 MC122 3.8. FLAT function Press and release the FLAT buttonon remote，the head and foot actuators moves to lower position(when the actuator is free, can turn off the vibration motor and turn off the indicator light when press once )，stop when press any buton； This function takes effect only by pressing the corresponding button on the remote. 3.9. ZERO G position function Press and release ZERO G button on remote，the head and foot actuator moves to preset memory position，stop when press any button； This function takes effect only by pressing the corresponding button on the remote. FCC： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ISED RSS Warning: This device complies with Innovation,Science and Economic Development Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ISED RF exposure statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le rayonnement de la classe b repecte ISED fixaient un environnement non contrôlés.Installation et mise en œuvre de ce matériel devrait avec échangeur distance minimale entre 20 cm ton corps.Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec d’autres.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : baclsh51 Create Date : 2018:10:20 17:59:18+08:00 Modify Date : 2018:12:08 11:30:47-08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : baclsh51 Title : Microsoft Word - MC122_User Manual Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2018:12:08 11:30:47-08:00 Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:c07ee5b8-6b4f-4e39-b9a2-e701301cd11a Instance ID : uuid:3c112a45-f56a-4201-a511-463d152238e0 Page Count : 3EXIF Metadata provided by EXIF.tools