Kenetics Innovations SR15-CBR1-0 Short Range Reader Module CBR1.0 User Manual Manual
Kenetics Innovations Pte Ltd Short Range Reader Module CBR1.0 Manual
Manual
K
ENETICS
S
HORT
R
ANGE
C
ONVEYOR
B
ELT
R
EADER
:
SR15-CBR1-0
U
SER
M
ANUAL
K
ENETICS
S
HORT
R
ANGE
C
ONVEYOR
B
ELT
R
EADER
T
ABLE
O
F
C
ONTENT
I
Table Of Content
A
MENDMENT
R
ECORDS
............................................................................................. II
P
URPOSE
&
S
COPE
.................................................................................................. III
D
EFINITION
&
A
CRONYMS
........................................................................................ III
R
EFERENCES
........................................................................................................... III
SECTION 1: I
NTRODUCTION
............................................................................ 1-1
1.1 R
EGULATORY
N
OTES
...................................................................................1-1
1.2 H
ARDWARE
S
PECIFICATION
.........................................................................1-2
1.3 P
OWERING
U
P
T
HE
R
EADER
.........................................................................1-5
K
ENETICS
S
HORT
R
ANGE
C
ONVEYOR
B
ELT
R
EADER
A
MENDMENT
R
ECORDS
II
A
MENDMENT
R
ECORDS
S/N By Description Version Date
1 Goh Kok Keong Initial Draft 001
2 Zhang Lijuan Update Operation 002
3 Ian Thng Add FCC Regulatory Notes 003
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
K
ENETICS
S
HORT
R
ANGE
C
ONVEYOR
B
ELT
R
EADER
P
REFACE
III
P
URPOSE
&
S
COPE
The purpose of this document is to serve as a user manual for the RFID reader.
D
EFINITION
&
A
CRONYMS
S/N Abbreviation Description
1
2
3
4
5
6
7
8
9
10
R
EFERENCES
S/N Document Source Version Date
1
2
3
4
5
6
7
8
9
10
K
ENETICS
S
HORT
R
ANGE
C
ONVEYOR
B
ELT
R
EADER
I
NTRODUCTION
1-1
SECTION 1: I
NTRODUCTION
1.1 Regulatory Notes
An RFID system comprises an RF transmission device, and is therefore subject to
national and international regulations. Prior to the powering and operation of the
SR15-CBR1-0, relevant compliance certificate should be obtained from the associated
watchdog agency. Sale, lease or operation in some countries may be subject to prior
approval by the respective governmental body or other international compliance
organization.
For countries requiring FCC certification, a typical system configuration containing
the SR15-CBR1-0 reader has been tested and found to be compliant with the limits for a
FCC Part 15C (intentional radiator) device. Nonetheless, it is still the responsibility of the
customers to have their complete system tested and approved for use from the appropriate
compliance agencies/authorities before operating or selling the system. As part of FCC
part 15 compliance requirements, it should be noted that:
• Modifications not expressly approved by this company could void the user's authority
to operate the SR15-CBR1-0 reader.
• The SR15-CBR1-0 reader complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) The SR15-CBR1-0 reader may not cause
harmful interference, and (2) must accept any interference received, including
interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
The next section introduces you to the specifics of the SR15-CBR1-0 reader.
K
ENETICS
S
HORT
R
ANGE
C
ONVEYOR
B
ELT
R
EADER
I
NTRODUCTION
1-2
1.2 Hardware Specification
Items Information
Electrical
Supply Voltage +5VDC +/- 5%
Current drawn 220mA ± 10%(scanning)
45mA ± 10% (standby)
Operation RF Frequency 13.56MHz
Mechanical
Host Interface RS 232
Dimension 54 X 54 X 7.5mm
Weight 17 grams
Others
Operation Temperature 0
o
C to + 50
o
C
Table 1-1 RF Board Specification
Figure 1-1 RF Board
K
ENETICS
S
HORT
R
ANGE
C
ONVEYOR
B
ELT
R
EADER
I
NTRODUCTION
1-3
Items Information
Mechanical
Host Interface RS232
Dimension 54 X 54 X 3mm
Weight 13 grams
Others
Operation Temperature 0
o
C to + 50
o
C
Table 1-2 Antenna Board Specification
Figure 1-2 Antenna Board
K
ENETICS
S
HORT
R
ANGE
C
ONVEYOR
B
ELT
R
EADER
I
NTRODUCTION
1-4
Figure 1-3 RF and Antenna Board
K
ENETICS
S
HORT
R
ANGE
C
ONVEYOR
B
ELT
R
EADER
I
NTRODUCTION
1-5
1.3 Powering Up The Reader
1.3.1 The connector on the RF board is used for powering up the reader and for serial-
based RS 232 communications as shown in Fig. 1-4.
Figure 1-4 Power and RS 232 Connector
1.3.2 After powering up, the
•
••
• red LED will light for a long duration as illustrated in Figure 1.5, and then turn off.
•
••
• Thereafter, the green LED will light for a long duration as illustrated in Figure 1.6,
and then turn off.
•
••
• Thereafter, the red LED and green LED will alternate blinking between each other to
indicate normal operation.
K
ENETICS
S
HORT
R
ANGE
C
ONVEYOR
B
ELT
R
EADER
I
NTRODUCTION
1-6
Figure 1-5 Active Red LED on power up.
Figure 1-6 Active Green LED on power up.