Kenmore Elite 11023012101 User Manual AUTOMATIC WASHER Manuals And Guides L0305291

KENMORE Residential Washers Manual L0305291 KENMORE Residential Washers Owner's Manual, KENMORE Residential Washers installation guides

User Manual: Kenmore Elite 11023012101 11023012101 KENMORE ELITE AUTOMATIC WASHER - Manuals and Guides View the owners manual for your KENMORE ELITE AUTOMATIC WASHER #11023012101. Home:Laundry & Garment Care Parts:Kenmore Elite Parts:Kenmore Elite AUTOMATIC WASHER Manual

Open the PDF directly: View PDF PDF.
Page Count: 19

E L ! T E
Three-Speed
Automatic Washers
Lavadoras autom&ticas
con tres velocidades
Laveuses automatiques
trois vitesses
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com
8530461B Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8 www.sears.ca
TABLE OF CONTENTS
PROTECTION AGREEMENTS ....................................................... 2
in the U.S.A ................................................................................... 2
in Canada ..................................................................................... 3
WARRANTY ..................................................................................... 3
WASHER SAFETY ........................................................................... 4
INSTALLATION REQUIREMENTS ................................................ 5
Tools and Parts ............................................................................ 5
Location Requirements ................................................................ 5
Drain System ................................................................................ 6
Electrical Requirements................................................................ 6
INSTALLATION INSTRUCTIONS .................................................. 7
Before You Start ........................................................................... 7
Remove Shipping Strap ............................................................... 7
Connect Drain Hose ..................................................................... 8
Connect the Inlet Hoses ............................................................... 8
Secure the Drain Hose ................................................................. 9
Level the Washer .......................................................................... 9
Complete Installation ................................................................. 10
FEATURES AND BENEFITS ....................................................... 10
WASHER USE ............................................................................. 11
Starting Your Washer ................................................................ 11
Selecting Wash/Spin Speeds .................................................... 12
Selecting a Cycle and Time ....................................................... 12
Rinse and Spin .......................................................................... 13
Drain and Spin ........................................................................... 13
Understanding Washer Cycles .................................................. 13
Normal Sounds .......................................................................... 13
LAUNDRY TIPS ............................................................................ 14
Loading ...................................................................................... 14
WASHER CARE ........................................................................... 14
Cleaning Your Washer ............................................................... 14
Water Inlet Hoses ...................................................................... 14
Vacation, Storage, and Moving Care ........................................ 15
TROUBLESHOOTING .................................................................. 15
SERVICE NUMBERS ............................................... BACK COVER
PROTECTION
AGREEMENTS
Master Protection Agreements
Congratulations on making a smart purchase. Your new
Kenmore ®appliance is designed and manufactured for years of
dependable operation. But like all products, it may require
preventive maintenance or repair from time to time. That's when
having a Master Protection Agreement can save you money and
aggravation.
Purchase a Master Protection Agreement now and protect
yourself from unexpected hassle and expense.
The Master Protection Agreement also helps extend the life of
your new appliance. Here's what's included in the Agreement:
V' Expert service by our 12,000 professional repair specialists
V' Unlimited service and no charge for parts and labor on all
covered repairs
V' "No-lemon" guarantee - replacement of your covered
product if more than three product failures occur within twelve
months
V' Product replacement if your covered product can't be fixed
V' Annual Preventive Maintenance Check at your request -no
extra charge
V' Fast help by phone - non-technical and instructional
assistance on products repaired in your home, plus convenient
repair scheduling
V' Power surge protection against electrical damage due to
power fluctuations
V' Rental reimbursement if repair of your covered product takes
longer than promised
Once you purchase the Agreement, a simple phone call is all that
it takes for you to schedule service. You can call anytime day or
night, or schedule a service appointment online.
Sears has over 12,000 professional repair specialists, who have
access to over 4.5 million quality parts and accessories. That's
the kind of professionalism you can count on to help prolong the
life of your new purchase for years to come. Purchase your
Master Protection Agreement today!
Some limitations and exclusions apply. For prices and
information call 1-800-827-6655,
Sears Installation Service
For Sears guaranteed professional installation of home
appliances and items like garage door openers and water
heaters, in the U.S.A. call I-SOO-4-MY-HOME ®.
2
Maintenance Agreements
Your purchase has added value because you can depend on
Sears HomeCentraf _for service. With over 2,400 Service
Technicians and access to over 900,000 parts and accessories,
we have the tools, parts, knowledge and skills to back our
pledge: We Service What We Sell.
Your Kenmore ®appliance is designed, manufactured and tested
to provide years of dependable operation. Yet any major
appliance may require service from time to time. The Sears
Maintenance Agreement offers you an outstanding service
program, affordably priced.
The Sears Maintenance Agreement
• Guarantees tomorrow's service at today's price.
• Eliminates repair bills resulting from normal wear and tear.
• Covers non-technical and instructional service calls.
• Provides an annual Preventive Maintenance Check, at your
request, to ensure that your appliance is in proper running
condition.
Some limitations apply. For information concerning Sears
Home Central ®Maintenance Agreements, call
1-800-361-6665.
KENMORE ELITEe
WASHER WARRANTY
Limited Lifetime Warranty on White Porcelain Basket
For the lifetime of the washer from the date of purchase, Sears
will replace the white porcelain wash basket if it chips or rusts
due to defective material or workmanship. After the first year, you
will be charged for labor.
Limited 10-Year Warranty on Plastic Tub*
For the second through tenth year from the date of purchase,
Sears will replace the plastic tub if it is defective in material or
workmanship. After the first year, you will be charged for labor.
Limited 5-Year Warranty on Gearcase Parts*
For the second through fifth year from the date of purchase,
Sears will replace any gearcase parts that are defective in
material or workmanship. After the first year, you will be charged
for labor.
Limited 2-Year Warranty on SENSOR SMART TM
Control Board
For two years from the date of purchase, Sears will replace the
SENSOR SMART TM control board if it is defective in material or
workmanship. You will be charged for labor after the first year.
Full 1-Year Warranty on Mechanical and Electrical parts
For one year from the date of purchase, when this washer is
installed and operated according to the instructions that come
with it, Sears will repair or replace any of its mechanical or
electrical parts if they are defective in material or workmanship.
Service must be provided by a Sears Service Department in the
United States or Canada or an authorized agent.
Warranty Restriction
If this washer is operated for any purpose other than private
family use, all warranty coverage is restricted to 90 days from the
date of purchase.
Travel or transportation expenses for customers who reside in
remote areas are not covered by this warranty.
Warranty Service
Warranty service is available by contacting the nearest Sears
Service Center in the United States or Canada. This warranty
applies only while the product is in use in the United States or
Canada.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state or province to
province.
For Sears warranty information or to contact a Sears Service
Center, please reference the service numbers located on the
back page of this manual.
Sears, Roebuck and Co.
D/817WA, Hoffman Estates, IL 60179
Sears Canada Inc.
Toronto, Ontario, Canada M5B 2B8
* In Canada a different warranty may apply.
Product Record
In the space below, record your complete model number, serial
number, and purchase date. You can find this information on the
model and serial number label, as shown.
Have this information available to help you quickly obtain
assistance or service when you contact Sears concerning your
appliance.
Model number 110
Serial number
Purchase date
Save these instructions and your sales receipt for future
reference.
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
l_ his is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injuryto persons when using the washer, follow basic
precautions, including the following:
• Read all instructions before using the washer. •
• Do not wash articles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry-cleaning solvents, other flammable,
or explosive substances as they give off vapors
that could ignite or explode.
• Do not add gasoline, dry-cleaning solvents, or
other flammable, or explosive substances to the
wash water. These substances give off vapors
that could ignite or explode.
• Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not
been used for such a period, before using the
washing machine, turn on all hot water faucets
and let the water flow from each for several
minutes. This will release any accumulated
hydrogen gas. As the gas is flammable, do not
smoke or use an open flame during this time.
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is
used near children.
Before the washer is removed from service or discarded,
remove the door or lid.
Do not reach into the washer if the drum, tub or agitator
is moving.
Do not install or store the washer where it will be
exposed to the weather.
Do not tamper with controls.
Do not repair or replace any part of the washer or
attempt any servicing unless specifically recommended
in this manual or in published user-repair instructions
that you understand and have the skills to carry out.
See "Electrical Requirements" for grounding instructions.
SAVE TNESEINSTRUCTIONS
4
INSTALLATION
REQUIREMENTS
Assemble the necessary tools and supplies before beginning the
washer installation. The parts supplied are in the washer basket.
Tools needed for connecting the drain hose and
water inlet hoses:
• Pliers that open to 19/16in. (3.95 cm)
• Flashlight (optional)
Parts supplied:
3 4 5
1. Drain hose
2. Silver, double-wire hose clamp
(for the bottom of the drain hose)
3. Yellow, single-wire hose clamp
(for the top of the drain hose)
4. Water inlet hoses (2)
5. Flat water inlet hose washers (4)
Tools needed for securing the drain hose and
leveling the washer.
• Adjustable or open end wrench %6in. (14 mm)
• Level
• Wood block
• Ruler or measuring tape
Parts supplied:
1 2
1. Shipping strap with fastener
2. Front leveling feet with nuts (2)
Alternate Parts
Parts listed are available from your local Sears store or Sears
Service Center. For further information, please call 1-800-4-MY-
HOME ®(1-800-469-4663}.
If You Have: You Will Need to Buy:
Laundry tub or Sump pump system (if not already
standpipe taller available)
than 96 in. (2.4 m)
1 in. (2.5 cm) 2 in. (5 cm) diameter to 1 in. (2.5 cm)
diameter diameter standpipe adapter, Part No.
standpipe 3363920
Overhead sewer Standard 20 gaL (76 L) 39 in. (99 cm) tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Floor drain Siphon break, Part Number 285320;
additional drain hose, Part Number
3357090 and connector kit,
Part Number 285442
Water faucets 2 longer water fill hoses:
beyond reach of 6 ft (1.8 m) Part Number 76314,
fill hoses 10 ft (3.0 m) Part Number 350008
Drain hose too Drain hose, Part No. 388423 and hose
short kit, Part No. 285442
Drain hose that is Hose kit, Part No. 285442
too long
Lint clogged drain Drain protector, Part No. 367031
Selecting the proper location for your washer improves
performance and minimizes noise and possible washer "walk."
Your washer can be installed in a basement, laundry room,
closet, or recessed area. (See "Drain System.")
IMPORTANT: Do not install or store the washer where it will be
exposed to the weather.
Proper installation is your responsibility.
You will need:
• A water heater set to deliver 120°F (49°C) water to the
washer.
A grounded electrical outlet located within 4 ft (1.2 m) of
where the power cord is attached to the back of the washer.
(See "Electrical Requirements.")
Hot and cold water faucets located within 4 ft (1.2 m) of the
hot and cold water fill valves, and water pressure of 5-100 psi
(34.5-690 kPa). Washers with triple dispensers require
26-100 psi (138-690 kPa) for best performance.
A level floor with a maximum slope of 1 in. (2.5 cm) under
entire washer. Installing the washer on carpeting is not
recommended.
• A sturdy floor to support the washer weight (washer, water
and load) of 315 Ibs (143 kgs).
Do not store or operate your washer in temperatures at or below
32°F (0°C). Some water can remain in the washer and can cause
damage in low temperatures. See "Washer Care" for winterizing
information.
Recessed area or closet installation
The dimensions shown are for the recommended spacing
allowed, except the closet door ventilation openings. The
dimensions shown for the closet door ventilation openings are
the minimum required.
olo
1. Front view
2. Side view
3. Closet door with vents
• Additional spacing should be considered for ease of
installation and servicing.
• Additional clearances may be required for wall, door and floor
moldings.
• Additional spacing of 1 in. (2.5 cm) on all sides of the washer
is recommended to reduce noise transfer.
If a closet door is installed, the minimum air openings in the
top and bottom of the door are required. Louvered doors with
air openings in the top and bottom are acceptable.
Companion appliance spacing should also be considered.
Standpipe drain system - wall or floor (view I & 2)
The standpipe drain requires a minimum diameter standpipe of
2 in. (5 cm). The minimum carry-away capacity can be no less
than 17 gal. (64 L) per minute. A 2 in. (5 cm) diameter to 1 in.
(2.5 cm) diameter standpipe adapter kit is available. See
"Alternate Parts."
The top of the standpipe must be at least 39 in. (99 cm) high and
no higher than 96 in. (244 cm) from the bottom of the washer.
Laundry tub drain system (view 1)
The laundry tub needs a minimum 20 gal. (76 L) capacity. The top
of the laundry tub must be at least 39 in. (99 cm) above the floor
and no higher than 96 in. (244 cm) from the bottom of the washer.
Floor drain system (view 2)
The floor drain system requires a siphon break that may be
purchased separately. See "Alternate Parts."
The siphon break must be a minimum of 28 in. (71 cm) from the
bottom of the washer. Additional hoses might be needed.
The washer can be installed using the standpipe drain system
(floor or wall), the laundry tub drain system, or the floor drain
system. Select the drain hose installation method you need. See
"Alternate Parts."
2
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
A 120-volt, 60-Hz., AC-only, 15- or 20-ampere, fused
electrical supply is required. Time-delay fuse or circuit
breaker is recommended. It is recommended that a separate
circuit serving only this appliance be provided.
This washer is equipped with a power supply cord having a 3
prong grounded plug.
6
• To minimize possible shock hazard, the cord must be
plugged into a mating, 3 prong, ground-type outlet, grounded
in accordance with local codes and ordinances. If a mating
outlet is not available, it is the personal responsibility and
obligation of the customer to have the properly grounded
outlet installed by a qualified electrician.
• If codes permit and a separate ground wire is used, it is
recommended that a qualified electrician determine that the
ground path is adequate.
• Do not ground to a gas pipe.
• Check with a qualified electrician if you are not sure the
washer is properly grounded.
• Do not have a fuse in the neutral or ground circuit.
1.3 prong grounding plug
2. 3 prong grounding-type outlet
3. Ground prong
4. Power supply cord
GROUNDING INSTRUCTIONS
For a grounded, cord-connected washer:
This washer must be grounded. In the event of a mal-
function or breakdown, grounding will reduce the risk
of electrical shock by providing a path of least resist-
ance for electric current. This washer is equipped with
a cord having an equipment-grounding conductor and
a grounding plug.The plug must be plugged into an
appropriate outlet that is properly installed and ground-
ed in accordance with all local codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or serviceman
if you are in doubt as to whether the appliance is prop-
erly grounded.
Do not modify the plug provided with the appliance -
if it will not fit the outlet, have a proper outlet installed
by a qualified electrician.
For a permanently connected washer:
This washer must be connected to a grounded metal,
permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead
on the appliance.
INSTALLATION
INSTRUCTIONS
To prevent floor damage, set the washer onto cardboard
before moving across floor.
Move the washer to within approximately 3 ft (90 cm) of the
final location.
Removing the shipping strap is necessary for smooth operation.
If the shipping strap is not removed, the washer will make
excessive noise.
1. Do not cut yellow strap. Pull yellow strap firmly, until
completely removed from washer. Depending on your model,
there will be either two or three cotter pins on the end of the
shipping strap when it is pulled out of the washer. The
electrical plug is attached to this shipping strap.
2. Pull firmly to remove the end of the shipping strap that
remains pinned to the back of the washer. This will release the
rear self-leveling feet.
3. Cut the shipping strap about 16 in. (41 cm) from plug end.
Look for the words "CUT HERE." Discard end with the cotter
pins. Slide remainder of shipping strap from the power cord.
Youwillusetheremainderoftheshippingstraplaterto
securethedrainhose. For standpipe or laundry tub drain systems:
1. Open yellow, single-wire clamp with pliers and slide over
hooked end of drain hose to secure the rubber and
corrugated sections together.
.......... ....... 4ose
Proper connection of the drain hose will protect your floors from
damage due to water leakage. To prevent the drain hose from
coming off or leaking, it must be installed per the following
instructions.
IMPORTANT: To ensure proper installation, this procedure must
be followed exactly.
1. Check the drain hose to see if it is the proper length.
2. Wet the inside of the straight end of the drain hose with tap
water. DO NOT USE ANY OTHER LUBRICANT.
3. Squeeze ears of silver, double-wire clamp with pliers to open.
Place clamp over the straight end of the drain hose 1/4in.
(6 mm) from the end.
_1/4"
(6 ram)
4. Open clamp. Twist hose back and forth while pushing down
onto drain connector at the bottom of the washer. Continue
until hose contacts the ribbed stop on the cabinet.
5. Place clamp over area marked "CLAMR" Release clamp.
1/4"
(6 mm)
(6 mm)
1. Hooked end
2. Drain hose
2. Put hooked end of drain hose into laundry tub or standpipe.
Rotate hook to eliminate kinks.
To prevent drain water from going back into the washer:
• Do not straighten hooked end of drain hose. Do not force
excess drain hose into standpipe. Hose should be secure,
but loose enough to provide a gap of air.
• Do not lay excess drain hose in bottom of laundry tub.
For floor drain installation, see kit number required under
"Alternate Parts."
1. Insert new flat washers (supplied) into each end of the inlet
hoses. Firmly seat the washers in the couplings.
1 2
1. Coupling
2. Washer
Connect the inlet hoses to the water faucets
Make sure the washer basket is empty.
2. Attach the hose with the red coupling to the hot water faucet
Screw on coupling by hand until seated on the washer.
3. Attach the hose with the blue coupling to the cold water
faucet. Screw on coupling by hand until seated on the
washer.
1. Drain Hose 3. Ribbed Stop
2. Clamp 4. Cabinet
8
4. Using pliers, tighten the couplings with an additional two-
thirds turn.
NOTE: Do not overtighten. Damage to the valves can result.
Clear the water lines
5. Run water through both faucets and inlet hoses, into a bucket
or laundry tub, to get rid of particles in the water lines that
might clog the inlet valve screens.
Connect the inlet hoses to the washer
6. Attach the hose with the red coupling to the HOT (bottom)
inlet valve. Attaching the red coupling first makes it easier to
tighten connection with pliers. Screw on coupling by hand
until seated on the washer. Using pliers, tighten the couplings
with an additional two-thirds turn.
NOTE: Do not overtighten. Damage to the valves can result.
1. Drape the power cord over the console.
2. Remove any cardboard used to move washer.
3. Locate the remaining portion of shipping strap (not the end
with the cotter pins) from step 3 of "Remove Shipping Strap."
Remaining portion of Shipping Strap
4. Wrap the drain hose to the laundry tub leg or standpipe with
the tie strap. Push fastener into the nearest hole in the
shipping strap. (See illustration 1 or 2.)
2
If the washer faucets and the drain standpipe are recessed,
put the hooked end of the drain hose in the standpipe. Tightly
wrap the tie strap around the water inlet hoses and the drain
hose. (See illustration 3.)
\2
1. Cold water inlet valve (blue)
2. Hot water intet valve (red)
NOTE: The inlet valve may be on the right or the left side of
the washer, depending on your model.
7. Attach the hose with the blue coupling to the COLD water
(top) inlet valve. Screw on coupling by hand until seated on
the washer. Using pliers, tighten the couplings with an
additional two-thirds turn.
NOTE: Do not overtighten. Damage to the valves can result.
Check for leaks
8. Turn on the water faucets and check for leaks. A small
amount of water might enter the washer. You will drain this
later.
NOTE: Replace inlet hoses after 5 years of use to reduce the
risk of hose failure. Record hose installation or replacement
dates for future reference.
If you connect only one water hose, you must cap off the
remaining water inlet port.
Periodically inspect and replace hoses if bulges, kinks,
cuts, wear, or leaks are found.
Properly leveling your washer prevents excessive noise and
vibration.
Install the front leveling feet
1. Prop up the front of the washer about 4 in. (10.2 cm) with a
wood block or similar object. The block needs to support the
weight of the washer.
2. Screw the lock nut onto each foot to within 1 in. (2.5 cm) of
the base.
(2.5 cm)
t
a. Screw the feet into the correct holes at the front corner of the
washer until the nuts touch the washer.
NOTE: Do net tighten the nuts until the washer is level.
4. Tilt the washer back and remove the wood block. Gently
lower the washer to the floor.
5. Slide to final location.
6. Tilt the washer forward until the rear of the washer is at least
4 in. (10.2 cm) off the floor. You may hear the self-adjusting
rear feet click into place. Lower the washer to the floor.
7. Check the levelness of the washer by placing a level on the
top edges of the washer, first side-to-side, then front-to-back.
8. Ifthewasherisnotlevel,movethewasheroutslightly,tip
back,propupthefrontofthewasherwiththewoodblock
andadjustthefeetupordownasnecessary.Repeatsteps
5through8untilwasherislevel.
9. Afterthewasherisinthefinallocationandlevel,usea%ein.
(14mm)open-endwrenchtoturnthenutsonthefeettightly
againstthewashercabinet.
Ifthenutsarenottightagainstthewashercabinet,the
washermayvibrate.
1. Checktheelectricalrequirements.Besurethatyouhavethe
correctelectricalsupplyandtherecommendedgrounding
method.(See"ElectricalRequirements.")
2. Checktobesureallpartsarenowinstalled.Ifthereisan
extrapart,gobackthroughthestepstoseewhichstepwas
skipped.
3. Check to be sure you have all of your tools.
4. Check to be sure that the yellow shipping strap was removed
from the back of the washer and used to secure the drain
hose.
5. Dispose/recycle all packaging materials.
6. Check to be sure the water faucets are on.
7. Check for leaks around faucets and inlet hoses.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
BENEFITS
Your new washer has many special features that contribute to
proper cleaning and fabric care. Here are descriptions of the
features and their benefits:
TOTAL CARE TM Agitator
The TOTAL CARE TM Agitator moves in three directions to ensure
proper cleaning. At the bottom of your washer the agitator vanes
move back and forth to flex the fabric, loosening the soil. The
upper portion of the agitator has vanes that push the clothes
down in a spiraling pattern to the area of best cleaning action. A
"rollover" motion displaces the clothes already at the bottom. For
your largest loads, the TOTAL CARE TM Agitator responds with a
vertical motion that senses the "large load" and guides items to
the bottom.
KING SIZE TM Capacity
Your washer can handle full-sized loads of heavy work clothes,
towels, or mixed items (see "Loading"). Loads with only a few
items can have a lower water level setting and need less wash
time.
Ultra Rinse System
Your washer allows you to add an automatic second rinse to the
Ultra Clean cycle and to the Permanent Press II cycle. Set the
Rinse Options control on 2nd rinse before you start the washer.
You can also select a "Rinse and Spin" option.
QUIET PAK TM II System
The QUIET PAKTM System is designed to reduce water sounds
and ringing noises. The cabinet is insulated with three sound-
damping materials for superior vibration and sound-damping
characteristics.
EZ Pour Dispensers
The dispensers for liquid chlorine bleach and liquid fabric
softener permit easy access with measuring cups. The bleach will
be diluted automatically before it comes into contact with your
wash load. You will add warm water to the dispenser for fabric
softener. The diluted softener is automatically dispensed into the
first deep rinse water.
Wash/Spin Speeds
Six combinations of speeds are provided for wash action (of
agitator) and spin motion (of basket). A Speeds selector control
knob lets you select a wash/spin speed for different types of
fabrics and soil levels. See "Selecting Wash/Spin Speeds."
Water Level and Temperature
The Water Level control gives you the flexibility to save water
when washing small loads. A Water Temperature control knob
lets you select a wash and rinse water temperature setting based
on the type of load you are washing. The settings for Automatic
Temperature Control (ATC) take away the worry of undissolved
detergent and ensure consistent cleaning results from season to
season with warm and cold washes.
8. Plug into a grounded 3 prong outlet.
9. Remove the protective film on the console and any tape
remaining on the washer.
10. Read "Washer Use" in the Washer User Instructions.
11. To test your washer, measure 1/2 of the normal
recommended amount of powdered or liquid detergent and
pour it into the washer basket or detergent dispenser (on
some models). Close the lid. Select any cycle, and then press
START. Allow it to complete one whole cycle.
10
WASHER USE
F_ WA]ERLEVEL
ULTRACLEAN
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids,
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
The following is a guide to starting your washer. Periodic
references to other sections of this manual provide more detailed
information.
1. Measure detergent and pour it into the washer.
.o .*.-"
Drop a sorted load of clothes loosely into your washec
• Load evenly to maintain washer balance. Mix large and
small items.
• Items should move easily through the wash water.
Overloading can cause poor cleaning.
• To reduce wrinkling of permanent press clothes and some
synthetic knits, use the Large Load setting to provide
more space (see step 5).
2. (OPTIONAL STEP) Pour measured liquid chlorine bleach into
the liquid chlorine bleach dispenser. Bleach will be dispensed
automatically during the wash part of the cycle.
• Never use more than 1 cup (250 mL) for a full load. Use
less for a smaller load size.
• Follow the manufacturer's directions for safe use.
• To avoid spilling, use a cup with a pouring spout. Do not
let bleach splash, drip, or run down into the washer
basket.
• Use only liquid chlorine bleach in this dispenser.
3. (OPTIONAL STEP) Pour measured liquid fabric softener into
the liquid fabric softener dispenser. Softener is added
automatically during the rinse portion of the cycle.
Dilute liquid fabric softener by filling the dispenser with warm
water until liquid reaches the bottom of the opening of the
funnel-shaped portion of the dispenser.
• Do not spill or drip any fabric softener on the clothes.
• Use only liquid fabric softener in this dispenser.
4. Close the washer lid.
5. Turn the Water Level selector to the correct setting for your
wash load and the type of fabric being washed.
• Choose a water level that allows the load to move freely
for best fabric care. See "Loading."
11
• You may change to a higher level setting after the washer
has started filling by turning the knob to a different
setting.
6. Set the Water Temperature selector to the correct setting for
the type of fabric and soils being washed. Use the warmest
water safe for fabric. Follow garment label instructions.
Water Temp Use for
Hot Whites and pastels
111°F (44o0} Heavy soils
or above
Warm Bright colors
90°'110°F Moderate to light soils
(32°-43°C)
Cold Colors that bleed or fade
70°'90°F Light soils
(21°-32°0)
NOTE: In wash water temperatures colder than 70°F (21°C),
detergents de not dissolve well. Soils can be difficult to
remove. Some fabrics can retain wear wrinkles and have
increased pilling (the formation of small lint-like balls on the
surface of garments).
(OPTIONAL) An Automatic Temperature Control (ATC)
electronically senses and maintains a uniform water
temperature by regulating incoming hot and cold water.
• Even in cold wash, some warm water is let into the
washer to maintain a minimum temperature of 70°F
(21°C).
• Warm wash is maintained at approximately IO0°F (38°C).
• Warm rinse is maintained at approximately 75° (24°C) for
all warm rinse settings.
7. (OPTIONAL STEP) For a second rinse at the end of the Ultra
Clean cycle or the Permanent Press II cycle, turn the Rinse
Options selector to 2nd Rinse.
8. Set the Speeds Control knob according to the type of fabric
in the load. See "Selecting Wash/Spin Speeds."
9. Push in the Cycle Selector Control (Timer) knob and turn it
clockwise to the wash cycle you want. Reduce the wash time
when using a small load side setting. See "Selecting a Cycle
and Time."
Pull out the Cycle Selector Control (Timer) knob to start the
washer.
To stop or restart your washer
• To stop the washer at any time, push in the Cycle Selector
Control (Timer) knob.
• To restart the washer, close the lid (if open) and pull out
the Cycle Selector Control (Timer) knob.
This section describes the wash/spin speeds you can select with
the Speeds control. Each speed setting is designed for different
types of fabric and soil levels.
DEUCATE NORMAL
SLOWISLOW SLOWIFAST
HANDWASH /
CASUAL •
EX_,ASLOWISLOW
HANDWASHPLUS
FINEDEUCATES
INTERMIT_NT
EXTRASLOWISLOW
HEAVYDUW
oFAST/FAST
••HANG DRY
FASTISLOW
Speeds Selector knob
Normal speed
This speed setting is for normally soiled cottons and linens.
Setting combines slow speed agitation and fast spin speeds to
shorten drying time.
Heavy Duty speed
This speed setting is for sturdy or heavily soiled loads. Setting
combines fast speed agitation and fast spin speeds.
Hang Dry speed
This speed setting is for sturdy permanent press fabrics that will
be line dried. Setting combines fast speed agitation and slow
spin speeds to reduce wrinkling.
Handwash Plus Fine Delicates speed
Use this speed setting for hand washable and special-care items.
The wash action has repeating periods of extra-slow speed
agitation and soaking. Slow spin speeds help reduce wrinkling.
NOTE: Do not use this cycle for large items such as blankets.
Some "Hand Wash" items, particularly wool, naturally shrink
when washed. When still wet, block these items by gently
stretching to original measurements. Allow the items to dry flat.
Handwash/Casual speed
This speed setting is for lingerie and loosely knit items. Setting
combines extra-slow speed agitation for gentle soil removal and
slow spin speeds to reduce wrinkling.
Delicate speed
This speed setting is for washable knit fabrics and permanent
press fabrics. Setting combines slow speed agitation for gentle
soil removal and slow spin speeds to reduce wrinkling.
This section describes the available wash cycles and will help
you make the best cycle selections for your wash loads. Each
cycle is designed for different types of fabric and soil levels.
• The washer pauses briefly throughout each cycle. These
pauses are normal. Refer to "Normal Sounds" to learn more
about the sounds you may hear during a wash cycle.
• Refer to "Understanding Washer Cycles" to learn what
happens during a wash cycle,
NOTE: Use the full time for heavy soil and sturdy fabrics. For light
soil and delicate fabrics, use less time.
12
ULTRACLEAN
5UM_ '
2ND RINSE
oPERMANENT
PRESSII
SHORT
2ND
RINSE
Cycle Selector Control (Timer) knob
Permanent Press II cycle
This cycle includes a load-cooling process that reduces wrinkling
compared to other cycles. Select up to 10 minutes of wash time.
NOTE: When the timer reaches Pause, the washer will drain and
pause for no more than 2 minutes while some of the wash water
is drained and replaced with rinse water.
Ultra Clean cycle
Use this cycle for most loads to get between 6 and 16 minutes of
wash time.
Prewash cycle
Use this cycle to get up to 4 minutes of agitation to help remove
heavy soils and stains that need pretreatment. Prewash cycle
should be followed by an Ultra Clean or Permanent Press II cycle
with additional detergent added.
Soak cycle
Soak cycle features 4 minutes of agitation followed by an
unlimited soak time to help remove heavy soils and stains that
need pretreatment. You will need to reset the washer to a Spin
setting to remove water. Soak cycle should be followed by an
Ultra Clean, Permanent Press II, or Prewash cycle with additional
detergent.
NOTE: Hot water is not recommended for soaking. It may set
some stains.
i11[Io[,J I
When using extra detergent for heavily soiled clothes, or washing
special-care items, you may find an extra rinse and spin is
needed.
1. Set the controls for Water Level, Water Temperature, Rinse
Options (to One Rinse), and Speeds.
2. Push in the Cycle Selector Control (Timer) knob and turn it
clockwise to any of the Rinse settings.
3. Pull out the Cycle Selector Control (Timer) knob. The washer
fills to the selected water level, agitates, drains, and spins.
A drain and spin may help shorten drying times for some heavy
fabrics or special-care items by removing excess water.
1. Set Rinse Options Control (to One Rinse).
2. Set Speeds Control:
•For fast spin, use the Heavy Duty setting.
• For slow spin, use the Delicate setting.
3. Push in the Cycle Selector Control (Timer) knob and turn it
clockwise to any of the Spin settings.
4. Pull out the Cycle Selector Control (Timer) knob. The washer
drains, then spins.
When the Cycle Control knob is set to a number and pulled out,
the washer fills (to the selected load size) before agitation and
timing start. The washer begins agitating immediately after filling;
agitation occurs with the washer lid up or down.
During agitation, the agitator creates a continuous rollover action
that provides a thorough cleaning of the wash load.
After agitation starts, the Cycle Control knob turns clockwise until
it points to an OFF area and the cycle ends.
NOTE: The washer pauses briefly throughout each cycle. These
pauses are normal for washer operation.
WASH RINSE
1. Fill _1. Fill
2. Washselected _2. Rinse
time
_J 3. Drain_No I I 3. Drain No
agitation _agitation
___J 5. Spin
TThe Permanent Press cycle i_i6. Off
partially drains, fills,agitates
briefly, and drains.
Your new washer may make sounds your old one didn't. Because
the sounds might be unfamiliar, you may be concerned about
them. These sounds are normal.
During washing
When you select a small load size setting, your washer has a
lower water level. This can cause a clicking sound from the upper
part of the agitator.
During drain
If water is drained quickly from your washer (depending on your
installation), you may hear air being pulled through the pump
during the end of draining.
After drain and before spin
When the cycle changes from draining to spinning, you may hear
gears engaging.
13
LAUNDRY TIPS
Preparing clothes for washing
Follow these recommendations to help you prolong the life of
your garments.
• Close zippers, snaps, and hooks to avoid snagging other
items. Remove pins, buckles, and other hard objects to avoid
scratching the washer interior. Remove non-washable trim
and ornaments.
• Empty pockets and turn them inside-out.
• Turn down cuffs; brush away lint and dirL
• Turn synthetic knits inside-out to avoid pilling.
• Tie strings and sashes so they will not tangle.
• Mend tears, loose hems, and seams.
• Treat spots and stains.
• Stained or wet garments should be washed promptly for best
results.
Sorting
• Separate heavily soiled items from lightly soiled ones, even if
they would normally be washed together. Separate lint-givers
(towels, chenille) from lint-takers (corduroy, synthetics,
permanent press). When possible, turn lint-givers inside-out.
• Separate dark colors from light colors, colorfast items from
non-colorfast items.
• Sort by fabric and construction (sturdy cottons, knits, delicate
items).
Unloading
• Remove clothes from washer after the cycle is completed.
Metal objects such as zippers, snaps, and buckles may rust if
left in the washer basket for a long period of time.
Loading suggestions (maximum size loads)
KING SIZE TM Capacity Plus Washer
Heavy Work Clothes
4 jeans 2 sweatpants
4 workpants 2 sweatshirts
4 workshirts
Towels
10 bath towels 14 washcloths
10 hand towels
Mixed Load
3 sheets (1 king, 2 twin)
4 pillowcases
3 shirts
3 blouses
9 T-shirts
9 shorts
10 handkerchiefs
WASHER CARE
Cleaning the exterior
Use a soft, damp cloth or sponge to wipe up any spills such as
detergent or bleach. Occasionally wipe the outside of your
washer to keep it looking new.
Cleaning the interior
To clean your washer interior, add 1 cup (250 mL) of chlorine
bleach and 1 scoop or capful of detergent into your dispenser,
and run the washer through the Normal cycle using hot water.
Repeat this process if necessary.
NOTE: Remove any hard water deposits using only cleaners
labeled as washer safe.
Replace inlet hoses after five years of use to reduce the risk of
hose failure. Periodically inspect and replace inlet hoses if
bulges, kinks, cuts, wear or leaks are found.
When replacing your inlet hoses, mark the date of replacement
on the label with a permanent marker.
14
Install and store your washer where it will not freeze. Because
some water may stay in the hoses, freezing can damage your
washer. If storing or moving your washer during freezing weather,
winterize it.
Non-use or vacation care:
Operate your washer only when you are at home. If you will be on
vacation or not using your washer for an extended period of time,
you should:
• Unplug washer or disconnect power.
• Turn off the water supply to the washer. This helps avoid
accidental flooding (due to awater pressure surge) while you
are away.
To winterize washer:.
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. Put 1 qt (1 L) of R.M-type antifreeze in the basket.
4. Run washer on an Extended Spin cycle.
5. Unplug washer or disconnect power.
To use washer again:
1. Flush water pipes and hoses.
2. Reconnect water inlet hoses.
3. Turn on both water faucets.
4. Plug in washer or reconnect power.
5. Run the washer through any cycle with V;_the normal
recommended amount of detergent to clean out the
antifreeze.
To transport the washer:.
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. If washer will be moved during freezing weather, put in 1 qt (1
L) of R.V.-type antifreeze in the basket. Run washer on an
Extended Spin cycle.
4. Disconnect the drain from the drain system.
5. Unplug the power cord.
6. Place the inlet hoses into the basket.
7. Drape the power cord and drain hose over edge into the
basket.
8. Place the expanded foam plug retained from the washer's
shipping material into basket opening. Close the lid and put a
piece of tape over the lid and down to the front of the washer.
Re-installing the washer
1. Follow the "Installation Instructions" to locate, level and
connect the washer.
2. Run the washer through any cycle with V;_the normal
recommended amount of detergent to clean out the
antifreeze, if used.
TROUBLESHOOTING
First try the solutions suggested here and possibly avoid
the cost of a service call...
Washer won't fill, rinse or wash
Does the water level seem too low, or does the washer
appear to not fill completely?
This washer uses very little water and never fills completely.
Water will not be seen over the top of the wash plate.
•Checkthe following:
Is the power cord plugged into a grounded 3 prong outlet?
Is there power at the plug? Check electrical source or call
electrician.
Are the hot and cold water faucets turned on?
Is the water inlet hose kinked?
Are the water inlet valve screens clogged?
Washer stops
•Checkthe following:
Is the power cord plugged into a grounded 3 prong outlet?
Are the hot and cold water faucets turned on?
Is the water inlet hose kinked?
Are the water inlet valve screens clogged?
•Is there power at the plug?
Check electrical source or call electrician.
•Has a fuse blown or has the circuit breaker tripped?
If problem continues, call electrician.
•Are you using an extension cord?
Do not use an extension cord.
Is the Cycle Selector Control (Timer) knob lined up and
pulled out?
Turn Cycle Selector Control (Timer) knob to cycle and pull out
to start washer. If washer still doesn't start, push knob back
in, turn slightly to the right and pull out again.
Is the washer overloaded?
Wash smaller loads. See "Starting Your Washer" for
maximum load size.
15
Washer won't drain or spin Washer leaks
Is the drain hose clogged, or the end of the drain hose
more than 96 in. (244 cm) above the floor?
See "Installation Instructions" for proper installation of drain
hose.
Check the following:
Are the fill hoses tight? Are the fill hose washers properly
seated? Is the drain hose clamp properly installed? (See
"Installation Instructions.")
Is the lid open?
The lid must be closed during operation.
Is there excessive sudsing?
Use less detergent. Follow manufacturer's directions.
Is your voltage low?
Check electrical source or call electrician. Do not use an
extension cord.
Washer continues to fill or drain, or the cycle seems
stuck
Does the drain hose fit too tightly in the standpipe, or is it
taped to the standpipe?
The drain hose should be loose yet fit securely. Do not seal
the drain hose with tape. The hose needs an air gap. (See
"Installation Instructions.")
Washer makes noise
Is the sink or drain clogged?
Sink, floor drain and standpipe must be able to handle 17 gal.
(64 L) of water per minute.
Is water bouncing off the tub ring or the load?
The wash load should be balanced and not overloaded. If
not, the fill or spray rinses can bounce off the load.
The washer must be level. The front and rear feet should be
properly installed and the nuts tightened. Reset the self-
adjusting rear feet if needed. (See "Installation Instructions.")
Did you pull the drain hose from the washer cabinet and
install it in a standpipe or laundry tub?
(See "Installation Instructions.")
Check household plumbing for leaks.
Washer basket is crooked
•Is the load balanced and the washer level?
The wash load should be balanced.
•Is the load balanced and the washer level?
The wash load should be balanced. See "Starting Your
Washer" for maximum load size.
The washer must be level. The front feet should be properly
installed and the nuts tightened. Reset the rear leveling legs,
if needed. (See "Installation Instructions.")
The washer must be level. The front feet should be properly
installed and the nuts tightened. Reset the rear leveling legs if
needed. (See "Installation Instructions.")
Are the self-adjusting rear feet installed?
Can you hear water spraying? This is part of the wash action.
If water is drained quickly from the washer, you may hear air
being pulled through the pump. This happens during the end
of draining. It is normal.
When the cycle changes from washing to draining or
spinning, you may hear a noise as the drive system shifts.
This is normal.
Are you washing items with metal snaps, buckles or
zippers?
You may hear metal items touching the basket. This is normal.
Are you washing asmall load?
You will hear more splashing sounds when washing small
loads. This is normal.
Is the washer installed on a solid floor?
Refer to the "Installation Instructions" for flooring
requirements.
Dispensers clogged or leaking
•Are the laundry products in the correct dispenser?.
Add the correct amounts of chlorine bleach or fabric softener
to the correct dispenser. Use only liquid chlorine bleach in the
bleach dispenser.
Load too wet
•Did you use the right cycle for the load being washed?
Select a control setting with a higher spin speed.
•Did you use a cold rinse?
Cold rinses leave loads wetter than warm rinses. This is normal.
Residue or lint on load
•Did you add detergent to the dispenser?
For best results, use the dispenser to dissolve the detergent.
• Did you sort properly?
Sort lint givers (towels, chenille) from lint takers (corduroy,
synthetics). Also sort by color.
Did you overload the washer?
The wash load must be balanced. See "Starting Your Washer"
for maximum load size. Lint can be trapped in the load if
overloaded. Wash smaller loads.
16
•Was paper or tissue left in pockets? _'_'_'_*_"__
Load is tangled or twisted
•Didyou use enough detergent?
Follow manufacturer's directions. Use enough detergent to
hold the lint in the water.
•Is your water colder than 70°F (21°0)?
Wash water colder than 70°F (21°C) may not completely
dissolve the detergent.
•Are you using a gentle wash cycle?
Consider using liquid detergent for slow speed cycles such
as Handwash, Casual or Delicate.
Stains on load
•Didyou use enough detergent?
Use enough detergent to remove soil and hold it in suspension.
Add the manufacturer's recommended amounts.
•Did you add fabric softener directly to the load?
Use your fabric softener dispenser. Do not drip fabric softener
on clothes.
•Is there above average iron (rust) in water?.
You may need to install an iron filter.
•Did you properly sort the load?
Sort dark clothes from whites and lights.
•Did you unload the washer promptly?
To avoid dye transfer, unload the washer as soon as it stops.
•Did you use a fabric softener dispensing ball?
Use the fabric softener dispenser provided with the washer.
Dispensing balls will not operate correctly with this washer.
•Did you use powder detergent in a low speed cycle?
Consider using liquid detergent.
•Did you add detergent, chlorine bleach or fabric softener
too late in the cycle?
Add detergent to your washer before loading the clothes.
Chlorine bleach and fabric softener should be added to the
dispensers before starting the washer.
Load is wrinkled
•Did you unload the washer promptly?
Unload the washer as soon as it stops.
• Did you use the right cycle for the load being washed?
Use the Delicate cycle or another cycle with a low spin speed
to reduce wrinkling.
•Did you overload the washer?.
The wash load must be balanced and not overloaded. Loads
should move freely during washing.
•Are the hot and cold water hoses reversed?
Check to be sure the hot and cold water hoses are connected
to the right faucets. (See "Installation Instructions.")
•Did you overload the washer?
See "Starting Your Washer" for maximum load size. Loads
should move freely during washing.
Gray whites, dingy colors
• Did you properly sort the load?
Dye transfer can occur when mixing whites and colors in a
load. Sort dark fabrics from whites and lights.
•Was the wash temperature too low?
Use hot or warm washes if safe for the load. Hot water should
be at least 111°F (44°C) to clean heavy soils.
Did you use enough detergent, or do you have hard
water?
Use more detergent for washing heavy soils in cold or hard
water. Water temperature should be at least 70°F (21°C) for
soap to dissolve and work properly.
Garment damage
• Checkthe following:
Were sharp items removed from pockets before washing?
Empty pockets, zip zippers, snap or hook fasteners before
washing.
Were strings and sashes tied to prevent tangling?
Were items damaged before washing?
Mend rips and broken threads in seams before washing.
Did you overload the washer?
See "Loading" for maximum load size.
Did you properly add chlorine bleach?
Do not pour chlorine bleach directly on load. Use your liquid
chlorine bleach dispenser. Wipe up bleach spills. Undiluted
bleach will damage fabrics. Do not place load items on top of
the bleach dispenser when loading and unloading the washer.
•Did you follow the manufacturer's care label instructions?
Wash temperature is not what I selected
•Are the hot and cold water inlet hoses reversed?
As washing progresses, the wash temperature will decrease
slightly for hot and warm washes. This is normal.
17
18
Your Home
For repair-in your home-of all major brand appliances,
lawn and garden equipment, or heating and coolingsystems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installationof home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME ® (1-8o0-4sg.4ss3)
Call anytime, day or night (U.S.A. and Canada)
www.sears.com www.sears.ca
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the locationof your nearest
Sears Parts & Repair Center.
1-800-488-1222
Call anytime, day or night (U.S.A. only)
www.sears.com
To purchase aprotectionagreement (U.S.A.)
or maintenance agreement (Canada) on a product serviced by Sears:
1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)
Para pedir servicio de reparaci6n
adomicilio, y para ordenar piezas:
1-888-SU-HOGAR _
(1-888-784-6427)
Au Canada pour service en fran(;ais:
1-800-LE-FOYER "c
(1-800-533-6937)
www.sears.ca
9/02
TM SM
® Registered Trademark /Trademark /Service Mark of Sears, Roebuck and Co., used under licensee by Sears Canada. Printed in U.S.A.
8530461B TM ,. SM .....
® Marca Reglstrada /Marca de Fabrlca /Marca de Servlclo de Sears, Roebuck and Co., usada bajo llcenc_a de Sears Canada. Impreso en EE. UU.
MD , ,
© Sears, Roebuck and Co. MCMarque de commerce /Marque deposee de Sears, Roebuck and Co., en vertu d'un porteur de llcence par Sears Canada. Impfim_ aux E.-U.

Navigation menu