Kenmore Elite 25374221700 User Manual REFRIGERATOR Manuals And Guides L0711499
KENMORE ELITE Top Mount Refrigerator Manual L0711499 KENMORE ELITE Top Mount Refrigerator Owner's Manual, KENMORE ELITE Top Mount Refrigerator installation guides
User Manual: Kenmore Elite 25374221700 25374221700 KENMORE ELITE REFRIGERATOR - Manuals and Guides View the owners manual for your KENMORE ELITE REFRIGERATOR #25374221700. Home:Kitchen Appliance Parts:Kenmore Elite Parts:Kenmore Elite REFRIGERATOR Manual
Open the PDF directly: View PDF 
.
Page Count: 21
| Download | |
| Open PDF In Browser | View PDF |
E
L
I
T
E
®
Refrigerator
Top Mount
Use & Care Guide
Refrigerador
Congelador
Superior
Guia para su uso y cuidado
R_frig_rateur
Compartiments
Superposes
Guide d'utilisation et d'entretien
"1"1
Z
m
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8
www.sea
rs.com
241858200 (0706)
¸
Welcome &
Congratulations
Important Safety
Instructions
Congratulations on your purchase of a new refrigerator!
We are very proud of our product and we are completely
committed to providing you with the best service possible.
Your satisfaction is our #1 priority.
We know you'll enjoy your new refrigerator and ThankYou
for choosing our product. We hope you consider us for
future purchases.
PLEASE READ AND
iNSTRUCTiONS
SAVE THESE
This Owner's Guide provides specific operating
instructions for your model. Use your refrigerator only as
instructed in this manual. These instructions are not
meant to cover every possible condition and situation that
may occur. Common sense and caution must be
practiced when installing, operating and maintaining any
appliance.
Please record your model and serial numbers below
for future reference. This information is found on the
serial plate located inside the refrigerator
compartment.
NOTE:
Use
253
only soap and
water to clean
serial plate.
970
era
Number:
•
Do not store or use gasoline, or other flammable liquids
in the vicinity of this or any other appliance. Read product
labels for warnings regarding flammability and other
hazards.
•
Do not operate the refrigerator in the presence of
explosive fumes.
•
Avoid contact with any moving parts of automatic ice
maker.
•
Remove all staples from the carton. Staples can cause
severe cuts, and also destroy finishes if they come in
contact with other appliances or furniture.
CHILD
SAFETY
Destroy or recycle the carton, plastic bags, and any
exterior wrapping material immediately after the
refrigerator is unpacked. Children should NEVER use
these items to play. Cartons covered with rugs,
bedspreads, plastic sheets or stretch wrap may become
airtight chambers, and can quickly cause suffocation.
OF YOUR
REFRIGERATOR
Risk of child entrapment
or:
,
Before
FOR YOUR SAFETY
PROPER
DISPOSAL
OR FREEZER
Model Number:
S
Please Read All instructions
Using This Refrigerator.
TABLE OF CONTENTS
Purg f#oDr
............................................
te!
2
Safety Instructions ..............................
Warranty ..............................................
2-3
3
Protection Agreements ........................
Installation--Includes Connecting Optional Ice
4
Maker To Water Supply .....................................
Door Removal
.....................................
5-6
7
Door Handle Installation ......................
Features At A Glance .........................
8
9
Temperature Controls ..........................
Looking Inside .....................................
Water Dispenser & Ice Service ...........
Food Storage & Energy Saving Tips ...
10
11-13
14-16
17
Normal Operating Sounds & Sights .... 18
Care & Cleaning ..................................
19-20
Before You Call ....................................
21
Child entrapment and
suffocation are not problems of
the past. Junked or abandoned
refrigerators or freezers are still
dangerous - even if they will sit
for"just a few days." If you are
getting rid of your old
refrigerator or freezer, please
follow the instructions below to
help prevent accidents.
Before you throw away your old refrigerator/freezer:
•
Remove doors.
•
Leave shelves in place so children may not easily climb
inside.
Have refrigerant removed by a qualified service
technician.
lmporta.nt
sa ety
Warranty information
KENIVIORE ELITE APPLIANCE
These Guidelines Must Be FollowedTo
EnsureThat
Safety
Mechanisms
In This Refrigerator
will
Operate Properly.
ELECTRICAL
iNFORMATiON
WARRANTY
One Year Limited Warranty
When installed, operated and maintained according to all
instructions supplied with the product, if this appliance fails due
to a defect in material or workmanship within one year from the
date of purchase, call 1-800-4-MY-HOME ® to arrange for free
repair.
The refrigerator must be pJugged into its own
dedicated 115 Volt, 60 Hz., AC only electric outlet.
The power cord of the appliance is equipped with a
three-prong grounding plug for your protection against
electrical shock hazards, it must be plugged directly
into a properly grounded three-prong receptacle. The
receptacle must be installed in accordance with local
codes and ordinances. Consult a qualified electrician.
Do not use an extension cord or adapter plug.
LIMITED
FiVE
REFRiGERATiON
*
immediately repair or replace any power cord that
becomes frayed or damaged.
This warranty covers only defects in material and workmanship. Sears will NOT pay for:
*
Never unplug the refrigerator by pulling on the power
cord. Always grip the plug firmly, and pull straight out
from the receptacle to prevent damaging the power cord.
Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
1.
Performance may be affected if the voltage varies by
10% or more. Operating the refrigerator with insufficient
power can damage the compressor. Such damage is
not covered under your warranty.
Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the refrigerator from being
turned off accidentally.
Avoid connecting refrigerator to a Ground Fault Interruptor
(GFI) circuit.
4.
Damage to or failure of this product if it is not installed,
operated or maintained according to all instructions supplied
with the product.
5.
Damage to or failure of this product resulting from accident,
abuse, misuse or use for other than its intended purpose.
6.
Damage to or failure of this product caused by the use of
detergents, cleaners, chemicals or utensils other than those
recommended in all instructions supplied with the product.
7.
Damage to or failure of parts or systems resulting from
unauthorized modifications made to this product.
*
*
*
*
*
IMPORTANT: Turning the refrigerator temperature
control to 0 turns off the compressor and prevents
you r refrigerator from cooling, but does not disconnect
the power to the light bulbs and other e!ectrica!
components.To turn off power to your refrigerator you
must unplug the power cord from the wa I outlet,
YEAR WARRANTY
SYSTEM
ON
SEALED
For five years from the date of purchase, when this appliance
is installed,operated,
and maintained according to the
instructions supplied with it, Sears will repair the sealed system
(consisting of refrigerant, connecting tubing, and compressor),
free of charge, if defective in material or workmanship.
If this appliance is used for other than private family purposes,
this warranty applies for only 90 days from the date of purchase.
Expendable items that can wear out from normal use,
including but not limited to filters, belts, light bulbs and bags.
2. A service technician to instruct the user in correct product
installation, operation or maintenance.
3. A service technician to clean or maintain this product.
Disclaimer
of implied warranties;
limitation of remedies
Customer's sole and exclusive remedy under this limited
warranty shall be product repair as provided
herein. Implied warranties, including warranties of
merchantability or fitness for a particular purpose, are limited to
one year or the shortest period allowed by law. Sears shall not
be liable for incidental or consequential damages. Some states
and provinces do not allow the exclusion or limitation of
incidental or consequential damages, or limitations on the
duration of implied warranties of merchantability or fitness, so
these exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used in the
United States and Canada.
I
or bypass the
|
grounding prong....)
y Donot,u.der
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL
60179
Sears Canada Inc.,Toronto, Ontario, Canada M5B 2B8
Master Protection Agreements
Sears Installation
Congratulations on making a smart purchase. Your new
Kenmore®product is designed and manufactured for
years of dependable operation. But like all products, it
may require preventive maintenance or repair from time
to time. That's when having a Master Protection
Agreement can save you money and aggravation.
For Sears professional installation of home appliances,
garage door openers, water heaters, and other major
home items, in the U.S.A. or Canada call 1-800-4-MYHOME ®.
The Master Protection Agreement also helps extend the
life of your new product. Here's what the Agreement*
includes:
Parts and labor needed to help keep products
operating properly under normal use, not just
defects. Our coverage goes well beyond the
product warranty. No deductibles, no functional
failure excluded from coverage - real protection.
Expert service by a force of more than 10,000
authorized Sears service technicians, which
means someone you can trust will be working on
your product.
Unlimited service calls and nationwide service,
as often as you want us, whenever you want us.
"No-lemon"
guarantee - replacement of your
covered product if four or more product failures occur
within twelve months.
Product replacement
be fixed.
F_
F_
if your covered product can't
Annual Preventive Maintenance Check at your
request - no extra charge.
Fast help by phone - we call it Rapid Resolution phone support from a Sears representative on all
products. Think of us as a "talking owner's manual".
Power surge protection against electrical damage
due to power fluctuations.
$250 Food Loss Protection annually for any food
spoilage that is the result of mechanical failure of any
covered refrigerator or freezer.
Rental reimbursement
if repair of your covered
product takes longer than promised.
10% discount off the regular price of any noncovered repair service and related installed parts.
Once you purchase the Agreement, a simple phone call
is all that it takes for you to schedule service. You can call
anytime day or night, or schedule a service appointment
online.
The Master Protection Agreement is a risk free purchase.
If you cancel for any reason during the product warranty
period, we will provide a full refund. Or, a prorated refund
anytime after the product warranty period expires.
Purchase your Master Protection Agreement today!
Some limitations and exclusions apply. For prices
and additional information
in the U.S.A. call 1-800827-6655.
* Coverage in Canada varies on some items. For full
details call Sears Canada at 1-800-361-6665.
Service
This Use & Care Manual provides
instructions for your model. Use the
instructed in this Use & Care Manual.
refrigerator, follow these important
specific operating
refrigerator only as
Before starting the
first steps.
LOCATION
•
Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
LEVELING
•
If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
All four corners of your refrigerator must rest firmly on a solid
floor. Your refrigerator is equipped with adjustable front rollers
or front leveling screws to help level your unit.
sources.
•
•
The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
To Level Your Refrigerator:
1.
Remove toe grille.
Consider water supply availability for models equipped
with an automatic ice maker.
2.
Use fiat-blade screwdriver
front rollers.
or 3/8" socket wrench to adjust
iNSTALLATION
Raise
Installation
,,
Clearances
Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top
Back
3/8"
1"
ltTstBliBtiot7
- Connecting
Ice Maker To Water Supply
To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator
from electrical power before connecting
a water supply line to the refrigerator.
To Avoid Property Damage:
,
-
Copper tubing is recom mended for the water supply line.Water supply tubing made of 1/_,,plastic is not
recommended since it greatly increases the potential for water leaks. Manufacturer will not be respo nsible
for any damage if plastic tubing is used for supply line.
DO NOT install water supplytubing in areas where temperatures fall below freezing.
Chemicals from a malfunctioning
softener can damage the ice maker, ifthe ice maker is connected
water, ensure that the softener is maintained and working properly.
to soft
iMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.
Before Installing The Water Supply Line, You Will Need
•
•
BasicTools: adjustable wrench, fiat-blade screwdriver, and Phillips TM screwdriver
Access to a household cold water line with water pressure between 30 and 100 psi.
•
A water supply line made of 1Ainch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed,
you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water
pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).
A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type
shutoff valve.
•
•
A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.
NOTE: A water line kit is available from your appliance dealer at additional Cost. It contains 25 feet (7:6 meters) of 1A
inch 0D Copper tubing, a saddle type shutoff valve (nonPiercing), (2) IA inch bras s compression nuts, (2)ferrules/
sleeves, and instructions for installing a water supply line.
To Connect Water Supply Line To lce Maker lnlet Valve
1.
Disconnect refrigerator from electric power source,
2.
Place end of water supply line into sink or bucket. Turn ON water supply and
flush supply line until water is clear. Turn OFF water supply at shut off valve.
Remove plastic cap from water valve inlet and discard cap.
Slide brass compression nut, then ferrule (sleeve) onto water supply line, as
shown.
Push water supply line into water valve inlet as far as it will go (1Ainch). Slide
ferrule (sleeve) into valve inletand finger tighten compression nut onto valve.
Tighten another half turn with a wrench; DO NOT over tighten.
3.
4.
5.
6.
7.
Plastic water
Tubing to Ice Maker
c=amp
B,es,
Compression
(s=_eve)
waterline
Water
Valve
With steel clamp and screw, secure water supply line to rear panel of refrigerator
as shown.
Coil excess water supply line (about 2 1Yzturns) behind refrigerator as shown
and arrange coils so they do not vibrate or wear against any other surface.
8. Turn ON water supply at shutoff valve and tighten any connections that leak.
9. Reconnect refrigerator to electrical power source,
10. TOturn ice maker on, lower wire signal arm (see ice maker front cover for
ON/OFF position of arm).
,t
fr°mh°useheld
water
suPplY
(Include
enough
tubing
in loop to allow
moving
refrigerator
outforcleaning,
)
IMPORTANT: It takes approximately 24 hours for the ice maker to begin produping ice, Air in new plumbing lines may cause ice
maker to cycle two orthree times before making a ful! tray of ice. New plumbing may cause ice to be discolored or have par flavor.
Discard ice made during the first 24 hours, After connePting the water supply, refertO "How to Prime the Water SupplySystem"for
imp°rtant informati°n about priming an empty water supply system"
Your refr gerator's water supp y system no udes severa tub ng nes, a water fi ter, a water valve and a water tank.To
ensure that your water dispenser works pro_rly, this system must be €omplete!yfilled with water when your refrigerator
is first connected to the household water supply line.
Door Removal instructions
Tools Necessary:
3/8"
Fixed
wrencr
3nc]
-lat
Screw
Head
DOOR
Top Hinge
Cover
Sockel
Wrench Sel
Driver
REMOVAL
INSTRUCTIONS:
If your refrigerator will not fit through an entrance area. you can reduce its size by
removing the doors. Check first by measunng the entrance.
IMPORTANT: Before you begin turn the refrigerator temperature control to"0" and
remove the electrical power cord from the wall outlet. Remove food from door shelves.
Top Hinge
Eye Brow
J_J'._
_=____-__._._-_
Bottom
1. Disconnect electrical supply.
2. Remove toe grille (see figure on page 5).
To remove freezer door:
1. Remove top hinge cover, eye brow and screws.
2. Trace around the hinge with a soft lead pencil. This makes reinstallation easier.
3. Remove top hinge and lift door off bottom hinge pin.
4. Reinstall doorin opposite orderand mannerof removal.
To remove refrigerator door:
1. Place wood block under door to support itsweight.
2. Unfasten the multi-wire cable bracket by removing its screw from the cabinet.
3. Detach the multi-wire cable connector located below the door.
Place your thumbs on flat sides of each connector, grasp firmly, and pull apart.
4. Detach the water tube from the connector located below the door. The connector
releases when you press its outer sleeve inward.
NOTE: If refrigerator has been used, have a container ready to catch excess water
from tube.
/Pin
Center
5.
Remove the bottom hinge screws and hinge, holding the door as its weight rests
on the wood block. Lay the door on its side to avoid damage to cable and tube.
6.
Remove the center hinge screws and hinge. Ensure plastic washer stays on
hinge pin.
Reinstall door in opposite order and manner of removal. When both doors are
reinstalled, connect water line by inserting tube and pushing until mark touches
face of fitting. Connect cable, replace toe grille, and plug in electrical power cord.
Hinge
7.
ToD,sCON"EcT
1. Press outer ring against face
i
_
2. Pullto
remove tube
Insert tube and
pUSh Until mark touches face Of fitting
ooor HandleinstallationInstructions
TO ATTACH
FREEZER
HANDLE:
1. Place rounded part of handle onto shoulder screw on
face of door and align the 2 holes in bottom of handle
with the 2 holes in bottom of door. Handle should be
mounted with set screw facing towards center of
door.Do not tighten the set screw yet.
2. Install the 2 screws into the bottom of the handle.
3. Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
TO ATTACH
REFRIGERATOR
HANDLE:
1. Place rounded part of handle onto shoulder screw on
face of door and align the 2 holes in top of handle with
the 2 holes in top of door. Handle should be mounted
with set screw facing towards center of door. Do
not tighten the set screw yet.
2. Install the 2 screws into the top of the handle.
3. Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
P!ug
Maker
Freezer
Control
Freezer Light
Eye Brow
Ice
Freezer Shelf
Freezer
Pullout
Tilt Out
Door Racks
Refrigerator
Control
Water Filter
Dairy Door
Deli Drawer
Cover
Tall Bottle
Retainer
Dell Drawer _7
Half Shelfs
Door Bins
Mid Level
Li
Container
Crisl
Crisper
Drawers
Fixed Door Bin
Toe Grille
Features
may vary according
to model
COOL
DOWN
PERIOD
To ensure safe food storage, allow the refrigerator to operate with the doors closed for at least 8 to 12 hours before loading
it with food,
REFRIGERATOR
& FREEZER
_ecommende
CONTROLS
spurn,
NOTE: When first setting the controls or when changing
a setting, wait 24 hours for the temperature to stabilize
before making additional changes.
TEMPERATURE
Colder
ADJUSTMENT
NOTE: When first turning refrigerator on. move refrigerator
and-_reezer controls to V
which is the recommended
initial setting. After 24 hours, adjust the controls as needed.
-
Freezer Control _some models',
-
Adjust temperature gradually: move the knob in small
increments, allowing the temperature to stabilize.
For colder temperatures, turn the knob towards Colder.
-
For warmer temperatures, turn the knob towards Cold.
\
I_]
\
|
Cold 0
\
l
k
Turning the refrigerator control will change temperatures in
both compartments. For example, if the refrigerator control is
turned to a colder setting, the freezer control may have to be
adjusted to a warmer setting. Turning the freezer control will
change only the freezer temperature.
\
Refrigerator Control (some models)
To maintain temperatures, a fan circulates ai r in the refrigerator
and freezer compartments. For good circulation, do not block
cold air vents with food items.
IMPORTANT: Turning the refrigerator temperature
control to "0" turns off the compressor and prevents
your refrigerator from cooling but does not disconnect
the power to the light bulbs and other electrical
comp0nents, To turn off power to your refrigerator YOU
must unplug the power cord from the wall outlet.
Refrigerator & Freezer Control (some models)
[/o ,, _
Refrigerator & Freezer Control (some models)
TEMPERATURE
ADJUSTMENT
GUIDE
If Refrigerator
compartment
Is Too Warm
Turn Refrigerator Control Slightly Towards Colder.
if Refrigerator
compartment
Is Too Cold
Turn Refrigerator Control Slightly Towards Cold.
if Freezer compartment
is Too Warm
Turn Freezer Control Slightly Towards Colder.
If Freezer compartment
Is Too Cold
Turn Freezer Control Slightly Towards Cold.
To Turn Refrigerator
Off
Turn Refrigerator Control To 0.
10
Toav0 d
p rso.alnjury0rproperty
damage;
handle
tempered
glass shelves carefully, Shelves may break suddenly if
nicked, scratched, or exposed to sudden temperature
SHELF
change.
ADJUSTMENT
Refrigerator shelves are easily adjusted to suit individualneeds. Before adjusting
the shelves, remove all food.
To adjust
sliding
shelves:
O
Remove shelf by pulling forward to stop position.
Lift front edge up and pull out.
Replace the shelf on any pair of rails in opposite order and manner of removal.
Sliding Wire Shelf
To adjust
cantilever
shelves:
NOTE: cantilever Shelves are supported at the back Of the refrigeratoil
Cantilever shelves are available in either glass or wire.
Lift front edge up.
Pull shelf out.
Replace the shelf by inserting the hooks at rear of the shelf into the wall
bracket. Lower the shelf into the desired slots and lock into position.
SpillProoff Mglass shelves (some models) catch and hold accidental spills. In
some models, the SpillProof TM shelves slide out for easy access to food and
for fast cleaning. The shelves slide out independently of the cantilever
brackets. Just pull the front of the shelf forward. The shelf can be extended
as far as the stopper will allow but it is not removable from the cantilever
bracket.
Sliding Glass Shelf
Full Width Cantilever Glass Shelf
Cantilever Glass Shelf - Fixed and Sliding
11
DOOR
STORAGE
TALL
Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items can
be quickly selected.
BOTTLE
RETAINER
(SOME MODELS)
The Tall Bottle Retainer keeps tall containers in the bin from
falling forward when opening or closing the refrigerator door.
To install, hold the retainer at the top, and slide it over the
outside wall of the bin, as shown in the diagram. The Tall Bottle
Retainer works best with a Bin Snugger.
Some models have door racks or bins that can accommodate
gallon-sized plastic drink containers and economy-sized jars
and containers. Some racks are adjustable for maximum
storage capacity.
The dairy compartment, which is warmer than the general food
storage section, is intended for short term storage of cheese,
spreads, or butter.
'!ii
i_
_!_
i!ii_
_i_.__
_i_
i__
i_ii
i!i_i_i
_iii_
!i_i
_i_
i_
i_iii_!
i__
i_i
_
Tall Bottle Retainer
SPECIAL
Tilt-Out Door Rack
ADJUSTABLE
DOOR
BINS
Some models have adjustable
to suit individual needs.
door bins that can be moved
iTEM RACK (SOME MODELS)
The innovative design of the Special Item Rack allows you to
store a six-pack of 12 ounce drink cans, a bottle of wine, a
two-liter soft drink bottle, or a carton of eggs. The Special
Item Rack mounts on the left side of your refrigerator. To install,
just slide the Special Item Rack onto any shelf as shown in
the drawing.
To move door bins
1.
2.
Lift bin straight up.
Remove bin.
3.
4.
Place bin in desired position.
Lower bin onto supports until locked in place.
i
Special Item Rack
Adjustable Door Bin
12
CRISPERS
Thecrispers,locatedunderthebottomrefrigeratorshelf,
aredesignedforstoringfruits,vegetables,
andotherfresh
produce.Washitems in clear water and remove excess
DELl DRAWER
(SOME MODELS)
Some models are equipped with a Deli Drawer for storage
of luncheon meats, spreads, cheeses, and other deli items.
water before placing them in the crispers. Items with strong
odors or high moisture content should be wrapped before
storing.
Dell Drawer
WiNE
Crisper Drawer
HUMiDiTY
CONTROL
RACK (SOME MODELS)
There are two different style Wine Racks. (See A and B
below.) The Wine Rack stores bottles of wine, or single twoliter plastic bottles of juice or soda pop. To install, slide Wine
Rack (A) onto the shelf with the curve facing in. To remove,
slide the Wine Rack out. Install on either side of shelf. The
Wire Wine Rack (B) simply sets on the shelf.
(SOME MODELS)
The Humidity Control, present on some models with crisper
drawers, allows you to adjust the humidity within the crisper.
This can extend the life of fresh vegetables that keep best
in high humidity.
NOTE: Leafy vegetables keep best when stored with the
Humidity Control set on High Humidity, or in a drawer
without a Humidity Control. This keeps tncomingair to a
minimum and maintains maximum moisture content. Low
Humidity is best for skinned fruits and vegetables.
Low
Humidity
Wine Racks
High
Crisper Humidity Control
13
WATER DISPENSER
The Filter Reset indicator light above the button will light up
each time the Water button is used. The following filter light
indications are:
Your refrigerator includes an automatic water dispenser on
the front of the refrigerator door. The dispenser is designed
to accommodate containers up to 71/2inches high.
Green
r
Amber
Red
The filter is still operating within its specified life
cycle.
The filter has reached approximately 80% of its
useful life. This is the recommended time to
purchase a replacement filter.
The filter is 100% used up. Change the filter as soon
as possible.
After the filter cartridge has been changed, press and hold
the Filter Reset button for 10-15 seconds.
Dispenser
Lock
The water dispenser includes a "Lock" button that allows
you to disable the water dispenser. You can use this lock to
prevent accidental spills, such as those caused by children
pressing the dispensing button without a glass.
To Lock Out
Press the LOCKTouch Pad for3-5 seconds.
A Red light will appear above the Touch Pad.
To Unlock
Press the LOCK Touch Pad for 3-5 seconds
until the Red light above the Touch Pad goes
out.
Dispensing
Water
Lock button
To operate the water dispenser, hold a drinking glass against
the back of the dispenser under the spout and press the
"Water" button. Hold the glass as far in as possible, ensuring
that the water dispensing spout is inside the lip of the glass.
_'/
To stop dispensing water, release the "Water" button and pull
the glass away from the dispenser For colder water, firsl
add ice to your drinking glass.
/
Press for water
qltett*dW_r_
/
//
\
/
How
0
the Water Dispenser
Works
The water tank. located inside the refrigerator door.
automatically
fills as water is dispensed
For proper
dispenser operation, the recommended supply water
pressure should fall between 30 psi and 100 psi.
I
Water pressure must not exceed 100
Ibs. Excessive pressure may cause
water filter to malfunction.
/
/
/
After the refrigerator is connected to the water supply, fill
the water tank by drawing one glass of water. It may take
about 11/2minutes after activating the dispenser button
before water begins to fill this first glass. Continue flushing
the system for 3 minutes to rid the tank and plumbing
connections of any impurities.
Water Dispenser
14
TURNINGYOUR
HOWTOPRIMETHEWATER
iCE MAKER
OFF
To stop the ice maker, lift the wire
signal arm until it clicks and
locks in the "up" or OFF position.
The ice maker also turns off
automatically when the ice
container is full. If your model
has an adjustable freezer shelf,
place the shelf in the lower
position, so that the wire signal
arm will hit the ice when the
container is full.
SUPPLY SYSTEM
The water tank, located inside the refrigerator door,
automatically fills as water is dispensed.
iCE PRODUCTION:WHATTO
SignalArm
EXPECT
The ice maker will produce 2.5 to 3 pounds of ice every 24
hours depending on usage conditions. Ice is produced at a
rate of 8 cubes every 80 to 160 minutes.
To Prime The Water Supply System:
1.
2.
3.
Begin filling the tank by pressing and holding a drinking
glass against the water dispenser button.
Keep the glass in this position until water comes out of the
dispenser. There will be noticeable spurts and sputters as
the system pushes air out through the system and
dispensing spout. This is normal. This may take about 1V2
minutes.
Continue dispensing water for about 3 minutes to flush the
system of any air and impurities. Empty glass as needed.
ICE MAKER
If your refrigerator has an automatic ice maker, it will provide a
sufficient supply of ice for normal use. During the initial startup
of your refrigerator, no ice will be produced during the first 24
hours of operation. Air in new plumbing lines may cause the
ice maker to cycle two or three times before making a full tray
of ice. With no usage, it will take approximately one to two days
to fill the ice container.
New plumbing connections may cause the first production of
ice cubes to be discolored or have an odd flavor. Discard ice
made during the first 24 hours.
TURNINGYOUR
ICE MAKER
ON
After the plumbing connections have been completed, the
water supply valve must be opened. Place the ice container
under the ice maker, pushing it as far back as possible. Lower
the wire signal arm to its "down" or ON position.
15
Kenmore Ice and Water Filter (some models)
NOTE: If you purchased a refrigerator with a Kenmore Ice and Water filter, please read the following use and care
information. This ice and water filter system filters water to your ice maker and water dispenser. It is located in the upper
right back corner of the fresh food compartment.
System Startup:
Water supply does not need to be turned off, however, do not use ice and water dispenser while installing filter.
The filter cartridge has already been installed in the filter housing at the factory. Refer to the How The Water Dispenser
Works section to properly fill the system with water.
Filter Housing_//
Threads
Small O-ring--_
Filter Cartr dge--''_
Large O-ring---_
Filter Cup-.......-"_
_
Twist to Remove
Order new filter cartridges through the
dealer where you bought the refrigerator,
or contact Sears Parts & Repair at 1-8004-MY-HOME ®. It might be good to order
some filter cartridges when you first install
your refrigerator. Be sure to ask for the
Kenmore replacement cartridge 46 9910.
Filter System NGRG 2000
with the Kenmore cartridge
The Kenmore Ice and Water
RG 100 is tested and certified
by NSF International,
the
nationally recognized and respected, not
for profit, certification organization for public
health safety. The Kenmore Filter system is
tested and certified to ANSI/NSF Standard
42. See performance
data sheet for
specifications. This system should not be
used on water that is microbiologically
unsafe or with water of unknown quality
unless the water has been adequately
disinfected before or after traveling through
the filtration system.
,,
,,
,,
,,
Changing
the Filter:
Water conditions vary throughout the world, but changing the water filter every
6 - 9 months normally will ensure the highest possible water quality. If the filter
has been in a refrigerator that has not been in use for awhile (during moving for
example), change the filter before reinstalling the refrigerator. The dispenser
system will also operate without filtration {with filter cartridge removed I.
To change filter:
It is not necessary to turn the water supply off to change the filter.
1.
2.
Set ice maker wire signal arm to the OFF Cup)position.
Hold filter cup firmly, and unscrew towards left (Some water could
leak out as you remove cup. This is normal I. Filter cartridge should come
down with cup. If cartridge remains in housing, pull down gently, while
twisting filter back and forth.
3. Rinse out cup under running water.
4. The large o-ring that seals the filter system sets in the o-ring groove
down inside the cup. Should the o-ring fall out during filter cartridge
replacement, simply place it back in the groove prior to screwing the cup
back in place. If the o-dng becomes damaged, you will need to order one
from Sears Parts & Repair at1-800-4-MY-HOM E_L
5. Discard old filter cartridge.
6. Remove new filter cartridge from packaging and place in cup. The end
with the small o-dng should be up, out of the cup.
7. Screw cup, with filter, back onto housing. Filter cartridge will self-align as
cup is tightened. Be sure cup is completely tightened with Kenmore logo
facing outward. Do NotTighten Past Stop.
8. Set ice maker wire signal arm to the ON (down) position.
9. Check for leaks. Open refrigerator door. Wipe any water droplets from the
filter cup. Fill a glass with water. If there is a leak, unscrew filter cup, and
reinsert the filter cartridge. Check placement of large O-ring. Reinstall
filter cup, making certain it is tightened completely.
10. To condition filter system and purge air from water line, fill a glass with
water. Continue flushing the system for 3 minutes to assure that the
purest water possible is stored in water tank.
Rated Capacity - 400 gallons
Rated service flow - .5 GPM
Maximum Rated Pressure - 100 PSI
Maximum Operating Temp. - 100 ° F
16
FOODSTORAGEIDEAS
Fresh Food Storage
•
•
The fresh food compartment should be kept between 34 ° F and 40 ° F with an optimum temperature of 37 ° F.
Avoid overcrowding the refrigerator shelves. This reduces the circulation of air around the food and results in uneven
cooling.
Fruits and Vegetables
•
Storage in the crisper drawers traps moisture to help preserve the fruit and vegetable quality for longer time periods.
Meat
•
Raw meat and poultry should be wrapped secu rely so leakage and contamination of other foods or surfaces does not
occur.
Frozen Food Storage
•
•
The freezer compartment should be kept at 0 ° F or lower.
A freezer operates most efficiently when it is at least 2/3 full.
Packaging
•
•
•
Foods for Freezing
To minimize dehydration and quality deterioration, use aluminum foil, freezer wrap, freezer bags or airtight containers.
Force as much air out of the packages as possible and seal them tightly. Trapped air can cause food to dry out,
change color, and develop an off-flavor (freezer burn).
Wrap fresh meats and poultry with suitable freezer wrap prior to freezing.
Do not refreeze meat that has completely thawed.
Loading the Freezer
•
Avoid adding too much warm food to the freezer at one time. This overloads the freezer, slows the rate of freezing,
and can raise the temperature of frozen foods.
•
Leave a space between the packages, so cold air can circulate freely, allowing food to freeze as quickly as possible.
•
Avoid storing hard-to-freeze foods such as ice cream and orange juice on the freezer door shelves. These foods are
best stored in the freezer interior where the temperature varies less.
ENERGY
•
-
\
-
SAVING
IDEAS
Locate the refrigerator in the coolest part of the room, out of direct sunlight,
and away from heating ducts or registers. Do not place the refrigerator
next to heat-producing appliances such as a range, oven, or dishwasher.
If this is not possible, a section of cabinetry or an added layer of insulation
between the two appliances will help the refrigerator operate more
efficiently.
Level the refrigerator so that the doors close tightly.
Refer to this Use & Care Manual for the suggested temperature control
settings.
Periodic cleaning of the condenser will help the refrigerator run more
efficiently. See the Care and Cleaning Charton page 19.
Do not overcrowd the refrigerator or block cold air vents. Doing so causes
the refrigerator to run longer and use more energy.
Cover foods and wipe containers dry before placing them in the
refrigerator. This cuts down on moisture build-up inside the unit.
Organize the refrigerator to reduce door openings. Remove as many
items as needed at one time and close the door as soon as possible.
17
UNDERSTANDING
HEAR
THE SOUNDS
YOU MAY
A. Evaporator
The flow of refrigerant through the evaporator may
create a boiling or gurgling sound.
Your new high-efficiency refrigerator may make unfamiliar
sounds. These are all normal sounds and soon will
become familiar to you. They also indicate your
refrigerator is operating as designed. Hard surfaces, such
as vinyl or wood floors, walls, and kitchen cabinets may
make sounds more noticeable. Listed below are
descriptions of some of the most common sounds you
may hear, and what is causing them.
B. Evaporator
Fan
You may hear air being forced through the refrigerator
by the evaporator fan.
C. Defrost
Heater
During defrost cycles, water dripping onto the defrost
heater may cause a hissing or sizzling sound. After
defrosting, a popping sound may occur.
NOTE: Bigid foam insulation is very energy efficient,
but is not a good sound insulator.
IMpORTANT:During
th e aut0matic defrost cycle;y0u
may not!ce a red g!ow in the vents on the back wall of
your freezer comPartmenL This is normal during the
defrost cycle,
D. Automatic
ice Maker
If your refrigerator is equipped with an automatic ice
maker, you will hear ice cubes falling into the ice bin.
E. Cold Control
Control
& Defrost
Timer/Automatic
Defrost
These parts can produce a snapping or clicking sound
when turning the refrigerator on and off. The timer also
produces sounds similar to an electric clock.
F. Condenser
Fan
If condenser coils are located underneath your
refrigerator as shown in the drawing at the left, you
have a condenser fan. You may hear air being forced
through the condenser by the condenser fan.
G. Compressor
Modern, high-efficiency compressors operate much
faster than older models. The compressor may have a
high-pitched hum or pulsating sound.
H.
Water Valve
If your refrigerator is equipped with an automatic ice
maker, you will hear a buzzing sound as the water valve
opens to fill the ice maker during each cycle.
L Drain Pan (Nonremovable)
You may hear water running into the drain pan during
the defrost cycle. The drain pan will be located on top
of the compressor for air-cooled condensers (black coils
on back of refrigerator).
J. Condenser
Coils (Fan-cooled models only)
May create minimal sounds from forced air.
K. WTD Transformer
Box
This part can produce a snapping or clicking sound
when actuating the WTD facade.
18
Always unplug the electrical power cord from the wall outlet before cleaning. Keep your refrigerator and freezer clean to prevent
odor build-up.Wipe up any spills immediatelyand clean both sections at least twice a year. Never use any type of scouring pads,
brushes, abrasive cleaners or strong alkaline solutions on any surface. Do not wash any removable parts in a dishwasher.
When moving the refrigerator, puff straight out. Do not shift the refrigerator from side to side as this may tear or
gouge the floor covering, if the refrigerator has an automatic ice maker, be careful not to move the refrigerator
beyond the plumbing connections.
Damp objects stickto cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
To avoid damage and help the refrigerator run as efficiently as possible, dean the condenser periodically.
Never use CHLORIDE to clean stainless steel
®
o
o
NOTES:
•
Turningthe refrigerator temperature control to"(}"turns off the compressor, butdoes not disconnect electrical power to the
light bulb or other electrical components.
Do not use razor blades orother sharp instruments which can scratch the appliance surface when removing aahesive
labels. Any glue leftfrom tape or labels can be removed with a mixture of warm water and mild detergent or touch the glue
residuewith the sticky side of tape you have already removed. Do not remove the serial plate.
•
Care & Cleaning
Part
What
Table
To Use
Tips and Precautions
Interior/Door
•
Soap and water
Liner
•
Baking
•
Soap and water
Wipe
Drawers/Bins
•
Soap and water
Do not wash any removable
Glass
•
•
Soap and water
Glass cleaner
Allow
•
Mild liquid sprays
•
•
•
Soap and water
Mild liquid sprays
Vacuum attachment
Vacuum dust from front of toe grille. Remove toe grille (See illustration on page
5). Vacuum backside and wipe with sudsy cloth or sponge. Rinse and dry.
•
Soap and water
Do not use commercial
handles.
household
use
Door
Gaskets
Shelves
Toe Grille
Exterior
Handles
and
Exterior
Handles
and
(Stainless
Steel Models
Only)
Condenser
Coils
soda and water
Use 2 tablespoons
of baking soda in 1 quart of warm water. Be sure to wring
excess water out of sponge or cloth before cleaning
around controls,
light bulb
or any electrical
part.
gaskets
with a clean soft cloth.
items (bins, drawers,
glass to warm to room temperature
cleaners,
CHLORIDE
immersing
ammonia,
to clean
in warm water.
or alcohol
stainless
Soap and water
_
•
•
Ammonia
Stainless
Cleaners
Clean stainless steel front and handles with soapy water. Use ammonia on
stubborn spots. Use a non-abrasive
stainless steel cleaner. These cleaners can
be purchased at most home improvement
or major department
stores.
•
Condenser
Cleaning
Brush is available from
No need to clean unless operating
conditions,
or if there is significant
•
your dealer,
Vacuum Cleaner
necessary, remove toe grille and use extended vacuum attachment
condenser
cleaning brush to remove dust build-up from condenser
"J" in illustration on page 18 for location).
Condenser
Coils
•
Vacuum
Use the dusting tool attachment
on your vacuum
condenser
coils (black tubes and wires) attached
refrigerators
only.
•
Soap and water
Cleaner
(Air-cooled
models only)
Water
steel.
refrigerator
under particularly dusty or greasy
pet traffic in your home. If cleaning is
(Fan-cooled
models only)
Defrost
Pan
to clean
•
Steel
Never
before
etc.) in dishwasher.
and
coils (see item
to remove dust build-up on the
to the back of air-cooled
Some models have defrost water pan located on top of compressor
at bottom rear
of refrigerator
(see illustration on next page). Remove access panel at rear of
refrigerator
and wipe water pan with damp cloth. NOTE: The defrost water pan is
NOT removable.
19
Water
replacing light bulbs.
REPLACING
FREEZER
THE
LIGHT
REFRIGERATOR
BULB
AND
(SOME MODELS)
1.
2.
Unplug refrigerator.
Wear gloves as protection against possible broken
glass.
3.
4.
5.
Unsnap light shield as shown.
Unscrew and replace old bulb with an appliance bulb
of the same wattage.
Replace light shield.
6.
Remember to plug the refrigerator back in.
Nonremovable Defrost Water Pan
(some models)
Light
Socket
Light
Bulbs (2)
Light
Cover
Refrigerator
Freezer Light Cover Removal
(some models)
Mid-Level Light Cover Removal
(some models)
Vacation and Moving Tips
Short
Vacations
•
•
•
Leave refrigerator operating during vacations of 3 weeks or less.
Use all perishable items from refrigerator compartment before leaving on vacation.
Turn automatic ice maker off, even if you will only be gone for a few days.
Long
Vacations
•
•
•
•
•
Remove all food and ice if you will be gone one month or more.
Turn controls to "0" and disconnect power (unplug refrigerator from electrical outlet).
Turn off automatic ice maker and turn water supply valve to closed position.
Clean interior thoroughly.
Leave both doors open to prevent odors and mold build-up. Block doors open if necessary.
Moving
•
•
•
•
Remove all food and ice.
If using handcart, load from side.
Adjust front rollers all the way up to protect them during sliding or moving.
Pad cabinet to avoid scratching surface.
2O
ATTE
To Properly
Install
See "Installation"
Your Refrigerator
Section
On Pages 5-6
Before You Call
Common
Occurrences
Before calling
for service,
review this list. It may save you time and
expense. This list includes common occurrences that are not the result of
defective workmanship or materials in this appliance.
•
•
Ensure plug is tightly pushed into electrical outlet.
Check/replace fuse with a 15 amp time-delay
breaker.
•
•
The temperature control is turned to "O".
Refrigerator may be in defrost cycle. Wait 20 minutes and check again.
Freezer temperature too cold.
Refrigerator temperature is
satisfactory.
•
Set freezer control to a warmer setting until freezer temperature
satisfactory. Allow 24 hours for the temperature to stabilize.
Refrigerator temperature too cold.
Freezer temperature is
satisfactory,
•
Set refrigerator control to a warmer setting. Allow 24 hours for
temperature to stabilize. Then check freezer temperatures and adjust
as needed.
•
•
The cabinet is not level.
Floor is weak.
•
Interior needs to be cleaned.
•
Foods that produce odors should be covered or wrapped.
•
•
•
Replace light bulb.
Ensure plug is tightly pushed into electrical outlet.
Light switch may be stuck. Push in light switch,
refrigerator control box, to release.
•
•
•
•
•
Ensure the Wire Signal Arm is not in UP position.
Ice maker should produce 4 to 5 pounds of ice in a 24 hour period.
Water supply isturned off.
Water pressure is too low.
The freezer is not cold enough.
Refrigerator does not run.
* Refrigerator
is noisy or vibrates.
Odors in refrigerator.
Cabinet light not working.
Automatic ice maker not working.
(some models)
*See Normal Operating Sounds and Sights section on page 18
21
fuse.
Reset
located
circuit
is
on the
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 21 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Mon Jan 21 04:58:16 2008 Author : Title : Subject :EXIF Metadata provided by EXIF.tools