Kenmore 465 1332 Users Manual

46513329600 46513329600 KENMORE ELITE KENMORE DISHWASHER - Manuals and Guides L0703160 View the owners manual for your KENMORE ELITE KENMORE DISHWASHER #46513329600. Home:Kitchen Appliance Parts:Kenmore Elite Parts:Kenmore Elite KENMORE DISHWASHER Manual

KENMORE ELITE Dishwasher Manual L0703160 KENMORE ELITE Dishwasher Owner's Manual, KENMORE ELITE Dishwasher installation guides

4651334 a48e62d6-0942-4a1b-9eb4-47bd428f98ce Kenmore Dishwasher 465.1334 User Guide |

2015-01-24

: Kenmore Kenmore-465-1332-Users-Manual-326896 kenmore-465-1332-users-manual-326896 kenmore pdf

Open the PDF directly: View PDF PDF.
Page Count: 22

DownloadKenmore Kenmore-465-1332-Users-Manual-  Kenmore-465-1332-users-manual
Open PDF In BrowserView PDF
Appendix C

®

Drawer Dishwasher
Use& CareGuide
Models: 465.1332% 465.1333% 465.1334 _
= color number

Co
Important

Safety

Warranty

Instructions

and Protection

Parts and Features

................................................

Agreements

.........................................................

Start Up Guide ............................................................

Loading

................................................................

Dishwasher

Cycles,

@

Recommendations

Options

Dishwasher

and Lights

Safe Items

Care and Cleaning

Troubleshooting

..............................................

....................................................

.....................................................

.......................................................

Gufa de uso y cuidado

Guide d'utilisation

...........................................

....................................................

et d'entretien

............................................

2

3-4

5

6

7-8

9-10

11-14

15

16-18

19-20

22

43

SAFETY
What You Need to Know About
Safety Instructions
Danger, Warning and important Safety instructions
appearing in this guide are not meant to cover all
possible conditions and situations that may occur.
Common sense, caution and care must be
exercised when installing, maintaining
operating the dishwasher.

instructions

for proper grounding

6. Children should never be permitted

to operate,

play in, with, or around this dishwasher
enclosed panels are properly

Safety Symbols, Words, Labels

procedures.

5. Connect to a properly rated, protected and sized
power supply circuit to avoid electrical overload.

7. Do not operate the dishwasher

or

Always contact your manufacturer about problems
or conditions you do not understand.

Recognize

be attached before electrical power is applied to
the dishwasher. Refer to the installation

unless all

in place.

8. To reduce the risk of injury when loading items to
be washed, sharp or pointed items should be
located with the handles up. Also, load sharp items
so they are not likely to damage the drawer seal.
9. Use only detergents and rinse additives designed
for a residential automatic dishwasher. Never use
soap, laundry detergent, or hand washing detergent
in your dishwasher. Keep these products out of
reach of children.
10. Do not sit, stand on or abuse the drawer(s)
dish rack(s) of the dishwasher.

or

11. Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, turn on all hot water
faucets and let the water flow from each for

important

Safety

instructions

several minutes. This will release any accumulated
hydrogen gas. As the gas is flammable, do not
smoke or use an open flame during this process.
12. Do not wash plastic items unless marked
"dishwasher safe" or the equivalent. For plastic
items not so marked, check the manufacturer's
recommendations.
13. Do not tamper with controls.

Products with a (_ label have been listed with
Underwriter's Laboratories, inc. - those with a CSA tag
have been listed with Canadian Standards Association.
Nevertheless, as with any other equipment using
electricity and moving parts, there is a potential hazard.

14. To prevent accidental child entrapment and
suffocation risks, always remove the drawers to the
washing compartment when removing an old
dishwasher

from service or discarding

it.

15. Use caution when unloading the dishwasher.
Dishes may be hot if unloaded shortly after a cycle
has completed.
16. Certified residential dishwashers
for licensed food establishments.
1. Read all instructions
2. Use the dishwasher

before using the dishwasher.
only for its intended

3. Disconnect electrical power to dishwasher
attempting to service.
4. To avoid electrical

function.
before

shock hazard, the sides and

back must be enclosed and the front panels must

are NOT intended

17. To avoid water, mold or mildew damage to your
home, inlet and drain hose connections should be
checked

periodically

for leaks.

Save These instructions
Future Reference

for

WARRANTY
KENMORE ELITE
APPLIANCE WARRANTY

DiSCLAiMER
REMEDIES
Customer's

ON E YEAR LI MITED WARRANTY

OF iMPLiED

sole and exclusive

shall be product

When installed, operated and maintained according to all
instructions supplied with the product, if this appliance fails due to
a defect in material or workmanship within one year from the date
of purchase, call 1-800-4-MY-HOME Rto arrange for free repair.
RVE=YEAR LIMITED WARRANTY ON DRAWER RACKS

including

repair

warranties

remedy under

as provided

this limited

herein. Implied

of merchantability

warranty

warranties,

or fitness for a particular

purpose, are limited to one year or the shortest period allowed
law. Sears shall not be liable for incidental or consequential
damages.

Some states and provinces

limitation

of incidental

the duration

of implied

these exclusions

For five years from the date of purchase, when this appliance is
installed, operated and maintained according to all instructions
supplied with the product, Sears will replace parts for the drawer
racks if they rust due to defective materials or workmanship. After
the first year, customer assumes any labor costs associated with
rack replacement.

WARRANTIES; LiMiTATiON OF

do not allow the exclusion

or consequential
warranties

or limitations

by

damages,

or

or limitations

of merchantability

or fitness,

on
so

may not apply to you.

This warranty

applies

United States

and Canada. This warranty

only while

this appliance

rights, and you may also have other
state.

is used in the

gives you specific

rights which

legal

vary from state to

Sears, Roebuck and Co., Hoffman Estates, IL 60179

If this appliance is used for other than private family purposes, this
warranty applies for only 90 days from the date of purchase.

Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8

THiS WARRANTY COVERS ONLY DEFECTS IN MATERIAL
AND WORKMANSHIP.
SEARS WILL NOT PAY FOR:

PRODUCT RECORD

1. Expendable items that can wear out from

number, and purchase date. You can find this information
on the
model and serial number label, located as shown in the Parts, and

but not limited to filters,

normal

use, including

belts, light bulbs, and bags.

In the space

below, record your complete

Features section
2. A service technician
installation,

operation

3. A service technician
4. Damage

to instruct

the user in correct

product

or maintenance.
to clean or maintain

to or failure

operated or maintained
with the product.

of this product
according

this product.

if it is not installed,
to all instructions

supplied

recommended
7. Damage

of this product caused by the use of
chemicals or utensils other than those

in all instructions

to or failure

unauthorized

obtain assistance

concerning

your appliance.

number

available

or service when you contact

465

Serial number
Purchase date

5. Damage to or failure of this product resulting from accident,
abuse, misuse or use for other than its intended purpose.
6. Damage to or failure
detergents,
cleaners,

on page 5. Have this information

you quickly

Model

model number,

supplied

of parts or systems

modifications

with the product.
resulting

made to this product.

from

Save these instructions and sales receipt
for future reference.

serial

to help
Sears

PROTECTI
in the USA
Master

Sears

Protection

Congratulations on making a smart purchase. Your new
Kenmore Elite_ product is designed and manufactured

In Canada

or

repair from time to time. That's when having a Master
Protection Agreement can save you money and
aggravation.

Maintenance

parts and accessories, we have the tools, parts,
knowledge and skills to back our pledge; We Service
What We Sell.

The Master Protection Agreement also helps extend
the life of your new product. Here's what's included in
the Agreement:
by our 12,000 professional

Your Kenmore :_product is designed, manufactured
and tested to provide years of dependable operation.

repair

specialists
Unlimited service and no charge
labor on all covered repairs

But like all products, it may require service from time
to time. The Sears Maintenance Agreement offers you
an outstanding service program, affordably priced.

for parts and

The Sears

"No-lemon"
guarantee - replacement of your
covered product if four or more product failures
occur within twelve months
Product replacement
be fixed

Fast help by phone

_f Power surge protection
due to power fluctuations
reimbursement

service at today's price

* Provides phone support from a Sears representative
on products requiring in-home repair

at your

• Even if you don't need repairs, this agreement
in-home

against electrical

provides an annual Preventive Maintenance Check,
at your request, to ensure that your product is in
proper running condition.

repair,

damage

Some limitations apply. For more information
about Sears Canada Maintenance
Agreements,
call 1-800-361-6665.

if repair of your covered

product takes longer than promised
Once you purchase the Agreement, a simple phone
call is all that it takes for you to schedule service. You
can call anytime day or night, or schedule a service
appointment

Agreement:

* Eliminates repair bills resulting from normal wear
and tear

- phone support from a Sears

representative on products requiring
plus convenient repair scheduling

Rental

Check

Maintenance

* Is your way to buy tomorrow's

if your covered product can't

Annual Preventive Maintenance
request - no extra charge

Agreements

Your purchase has added value because you can
depend on Sears HomeCentral _ for service. With over
2,400 Service Technicians and more than a million

Purchase a Master Protection Agreement now and
protect yourself from unexpected hassle and expense.

Expert service

Service

For Sears professional installation of home appliances,
garage door openers, water heaters, and other major
home items, in the USA call I-BOO-a-MY-HOME
_
(1-800-469-4663).

Agreements

for years of dependable operation. But like all
products, it may require preventive maintenance

installation

online.

Sears has over 12,000 professional repair specialists,
who have access to over 4.5 million quality parts and
accessories. That's the kind of professionalism you can
count on to help prolong the life of your new purchase
for years to come. Purchase your Master Protection
Agreement today!
Some limitations and exclusions
apply. For prices
and additional
information, call 1-800-827-665;5.
4

PARTS
Thisguidecoversseveraldifferent
models.The featureson your dishwashermay varyfrom thoseshown below.
A. Left side rack
B. Fold-down utility shelf
C. Middle rack

B

D. Right side rack
E. Upper wash arm paddle (select models}
R Wash manifold
G.
H.
I.
J.
K.
L.

Three-piece rack
(select models[}

A

Spray arm
Coarse filter cup
Coarse filter plate
Detergent dispenser (inside front drawer)
Rinse aid (inside front drawer)
Utensil basket

M. Control panel (on drawer top edge}
N. Indicator lights (select models}
O. Model and serial number (on side of draweO
P. One-piece

rack

Q. Fold-down utility shelf
R. Plate tine insert

Options

tit

_

........... ®
Rinse

Aid Low®

C_ean

®

Rinse

Aid Low

@

Hold B 5ec For Lock

f

Cycles

@
Heavy
Wash

Options

@

@

@

@

Nolrn®
Wash

China
Gentle

Quick
Wash

Quick
Rinse

\

*Styles and features

may vary by model.

START

|

Before You Start

selected cycle and options will illuminate. To cancel a
cycle or select another cycle, press the Cancel/Drain
pad. To cancel an option, press the option pad again,
or press the Cancel/Drain
pad.

• Do not pre-rinse. Simply scrape off any bones or
large food particles.
• If you have a food waste disposer make certain that
the disposer is empty before starting the dishwasher.

.

• Periodically check the coarse filter cup and empty if
necessary before starting the dishwasher (see page 17).
• Scrape off tomato-based

food soils (see page 16).

• Remove certain foods such as mustard, mayonnaise,
lemon juice, vinegar, salt or dressings from stainless
steel flatware as soon as possible. These foods may
cause rusting and pitting if allowed to remain in
contact with the surface of the flatware for an

Notes:
• If Start/Resume is not pressed within 30 seconds of
choosing a cycle, the dishwasher will turn off.
• Press the Start/Resume
pad once, then close
the drawer. Drawer must be closed within 3

extended period of time.

seconds after pushing Start/Resume or the lights
will flash and the audio alarm sound will be

Rinse Aid

heard. After closing the drawer there will be a
brief pause before the cycle begins.

important: This dishwasher is designed to use a
liquid rinse aid. Rinse aid greatly improves drying,
reduces spotting and filming, and reduces
moisture left on the dishwasher interior by
creating a "sheeting"
action. Water "sheets"
off
dishes, preventing drops of water from remaining
on dishes and creating spots. Drying performance
will improve after several washes using rinse aid.

The dishwasher remembers your last cycle so you do
not have to reset the cycle each time. To start the
dishwasher using the same cycle and options
selected on the previous wash, just press the
Start/Resume
pad.
5. To cancel a running cycle, press the Cancel/Drain
pad once. The dishwasher will drain, then shut off.
To turn the dishwasher off without draining, press the
Cancel/Drain
pad twice.

An automatic rinse aid dispenser is located next to the
detergent cup.
An illuminated light on the control panel indicates
when the rinse aid reservoir needs to be refilled. Check
the dispenser monthly. To fill and adjust the amount of
rinse aid dispensed into the dishwasher, see page 10.

Notes:
• If a cycle pad is pressed after the controls have been
"locked in", the light above the current cycle will flash
three times and an audible beep will be heard.

Hot Water

• If you have a two-drawer dishwasher model, each
drawer has its own controls and can run

For optimal cleaning and drying results, hot water is
necessary. The incoming water temperature should be
120 ° F (49 ° C[} to properly activate the detergent and
melt greasy food soils.

independently

into a glass in the sink. Place a candy thermometer
the glass and check the temperature once it has
stopped rising.

of the other.

Adding a Forgotten item

To check the incoming water temperature, turn on the
hot water faucet nearest the dishwasher and let it run

For best cleaning, the forgotten
early in the cycle.

in

item should be added

1. Grasp drawer handle and open drawer. An audible
beep will sound to indicate the drawer is open and
the cycle has been suspended.

Starting the Dishwasher

2. With the drawer open, add the item.
3. Press Start/Resume

1. Check that the coarse filter cup is securely in place
(see page 17).
2. Load the dishwasher

To start a cycle, press the StarUResume
pad once,
then close the drawer. After a brief pause, the cycle
will begin. To prevent unplanned cycle or option
changes, these selections are "locked in" after the
initial fill is complete.

then close the drawer.

Note: Extended interruption

and add detergent.

not recommended.

3. Select the desired cycle and options by pressing the
pads on the control panel. The indicator lights for the
6

of the wash cycle is

I

General Recommendations

Glasses, cups,
stemware, light-

Items can be centered behind a single tine or loaded
at an angle to maximize space.

weight plastics,
plates, bowls,
pans, longhandled utensils etc.

• Avoid blocking or preventing the spray arms from
spinning freely. Do not allow items to extend beyond
the racks.

can be loaded in
either rack. Do not

Face soiled surfaces toward the center of the
dishwasher.

load glasses over
the tines.

• Do not load anything above the inside top edge of
the drawers. This rack can accommodate items up to
11" (25.4 cm) in height.

The utility shelf on
the left side of the
rack folds up or down for loading flexibility.

For best dishwashing results follow guidelines on the
following pages to determine the best arrangement for
your items.
Important:
dishwasher

Do not remove the racks from the
drawer when loaded with dishes.

Recommended

Fold it

down to hold long-handled knives, spatulas and
spoons or short items like
cups or juice glasses. Fold
it up for taller items such as
glasses, bowls, plates, etc.
The edge of the utility shelf
is designed to hold
stemware in place.

Drawer

Loading
If you have a two-drawer dishwasher model, each
drawer has its own controls and can run independently
of the other. For a 10 pc. place setting load, a twodrawer dishwasher model is required. A single drawer
can hold a 5 pc. place setting load.
For a two-drawer

Drawer Loading Options
A variety of items
such as dinner plates,
mixing bowls, pots,
pans and baking
dishes can be loaded
in the rack.

10 pc. place setting load, see

recommended loading images below. For a single
drawer appliance, either loading image may be used.
Upper Drawer

Lower

AHAIVIol0

Drawer

pc. place setting

Cont.
7

Variable Tines

(select

models)

Variable tines, located in
the back half of the drawer,
provide convenient loading
space for almost any sized
item. Positioning the tines
flat or splayed out creates
adequate room for large, bulky items like pots and
pans or mixing bowls. Angling tines out
accommodates up to 12" plates.

1. Carefully pull back on the last tine until notches are
removed from the clip.
2. Rotate tine forward into the notches that best fit the
size of the dish.
3. Release tine to lock into place.

Sliding Tines

(select

models)

Sliding tines, located in
the front half of the
drawer, can be adjusted
to provide narrow spacing
for loading plates or wide
spacing for loading deep
bowls, pots or pans. Slide
one or both sets of tines
toward the back or front of the drawer for narrow or
wider spacing. Leave proper spacing between the
items in sliding and variable tines (select models} for
increased wash performance.

Basket

For optimum wash performance the utensil basket
should be placed along the front of the drawer with
the handle against the tub. Load the basket while it is
in the rack or take the basket out for loading on a
counter or table.
Place small items like baby bottle
caps, jar lids, corn cob holders,
etc., in a covered section (select
models}. Close the cover to hold
small items in place.
Be sure that nothing protrudes
through the bottom of basket or rack to
block the spray arm.
To avoid damaging
and stainless.

against the basket, mix items in each section of the
basket with some handles pointing up and some with
handles down. Load knives, handles up and spoons
and forks handles down.

Sabbath Guidelines Cselectmodels)

To position tines:

Utensil

When covers (select models} are folded down flat

the silver finish, do not mix silver

For those who observe Kosher dietary guidelines,
Star-K has certified that the drawers in the 2-drawer
model are separate and therefore one drawer can be
designated to wash utensils used for dairy, while the
other can be designated for washing meat utensils.
HOWEVER, NEITHER DRAWER CAN BE USED TO
WASH DISHES ON THE SABBATH OR HOLIDAYS!

Storage

of dishes

Although washing of dishes with the drawer dishwasher
is not permitted on the Sabbath or on holidays, storage of
dishes is possible by following the guidelines listed below.
Deactivation

of controls:

To deactivate the audible tones and lights, see page 10
and follow the instructions under Rinse Aid/Audible
Feedback Adjustment

Mode.

To deactivate the visual indicator lights, level "0"
should be selected for the Rinse Aid dispenser level.
* To deactivate the audible feedback, both Delay Hours
option lights should be turned to OFF.
If the Child Lock feature has been set, this will also
need deactivation. See page 12 for further instructions.
Reactivation of controJs after the Sabbath:
To reactivate the controls, repeat the process from page 10
and select the desired rinse aid and audio feedback levels.
For reactivation of the Child Lock feature, see page 12.
important:

Care should be taken when opening the

drawer(s} and loading dishes while in the disabled
mode as an accidental key press could activate the
indicator lights.
Notes:
• If needed, be sure to allow enough time to run a
cleaning cycle prior to the start of the Sabbath.
• Clean dishes should be unloaded from the drawer
dishwasher prior to setting the controls for the
Sabbath to prevent activation of the indicator lights.

|
Detergent

Recommended

Use a detergent designed specifically for use in an
automatic dishwasher. Be sure it is fresh. Store powdered
detergent in a cool, dpy place (not under the sink).

Too little detergent results in poor cleaning, hard water
filming/spotting
and poor drying. Too much detergent

important

etching/cloudiness.

Suds can cause the dishwasher

Notes:

• For optimal wash performance, powdered
detergent is recommended for use in the drawer
dishwasher dispenser.
• Dishwashing detergent gel or powder packets/
tablets can be used. To prevent potential residue
or decreased wash performance when using
these items, it is recommended that the dispenser
lid not be closed to allow the detergents to
dissolve properly from the beginning of the cycle.
Filling the detergent

can cause permanent

Amount

to overflow.

Measure

the detergent carefully and use only detergents
designed for use in a dishwasher. Less detergent is
needed in soft water. Try another brand of detergent if
sudsing continues.
The amount of detergent to use is determined by the
hardness of the water and soil level of the load. Refer
to the following chart for detergent
recommendations.

usage

dispensers:

1. Press the lever down to open the Main Wash
dispenser lid if not already open.
2. Pour detergent into both the Pre-Wash and Main
Wash compartments as necessary.
3. After filling the compartment(s],
close the Main
Wash dispenser lid until it clicks shut.
Detergent will automatically be released into the
dishwasher drawer during the wash cycle. The PreWash compartment will immediately begin to dispense
detergent into the dishwasher drawer.
important: Do not use detergent with the Quick
Rinse cycle. Leave the dispenser lid open when
running Quick Rinse.
Lever

Soft

Light Soil
Normal Soil
Heavy Soil

I tsp
2 tsp
3 tsp

2 tsp
2 tsp
3 tsp

(5=9 gpg)

All Levels

3 tsp

3 tsp

Hard
(10=12 gpg)

All Levels

3 tsp

3 tsp

(0=4 gpg)
Medium

*Your local Sears store, water
service can tell you the degree

In extremely

hard water

utility or state university
of water

hardness

conditions

extension

in your area.

(13 grains per

gallon or more*), it is difficult to achieve
results with any dishwasher.

good

A mechanical water softener may be necessary
improve water quality, detergent effectiveness,
and protect the dishwasher parts from the
damage that hard water can cause.

to

RECOM
Rinse Aid
important: This dishwasher is designed to use a
liquid rinse aid. Rinse aid greatly improves drying,
reduces spotting and filming, and reduces
moisture left on the dishwasher interior by
creating a "sheeting"
action. Water "sheets" off
dishes, preventing drops of water from remaining
on dishes and creating spots. Drying performance
wilJ improve after several washes using rinse aid.
The automatic Rinse Aid dispenser
is located next to the detergent
cup. A pre-determined
amount of
rinse aid will be added during the

_;,_ ,_, _

o

OFF

OFF

OFF

1

ON

OFF

OFF

2

ON

ON

OFF

3

ON

ON

ON

@

Note: A Rinse Aid dispenser level of "0" disables

i

the Rinse-Aid low indicator

1

light.

final rinse. When the dispenser is
low and needs to be refilled, an

4. To change the audible feedback,
Hours option pad.

indicator light on the control panel
will illuminate.

5. The first press of the Delay Hours option pad will
disable the drawer opened chime, the second press
will turn off the end-of-cycle
chime. Each press will
toggle between the available settings. Delay Hours
lights will illuminate with each touch of the Delay
Hours pad to indicate the audible setting.

Filling Rinse Aid dispenser:
1. Turn the plug 1/4 turn counterclockwise

press the Delay

and remove.

2. Pour liquid rinse aid into the circular opening until
liquid reaches the FULL level marking.
3. Wipe up any rinse aid that spills into the dishwasher
with a damp cloth to prevent excess foaming.
4. Place the plug back into the Rinse Aid dispenser,
turning clockwise until the plug is secure.

Rinse Aid/Audible
Feedback
Adjustment Mode
Important:

The rinse aid/audible

feedback

Drawer open/End=of=cycle
chime disabled

0 FF

0 FF

Drawer open chime enabled

ON

OFF

End=of=cycle chime enabled

OFF

ON

Drawer open/End=of=cycle
audio feedback enabled

0N

0N

mode

cannot be adjusted while a cycle is running, if the
Delay Hours option is running or if the dishwasher is
performing a Cancel/Drain.

6. Pressing any key pad other than High Temp Wash or
Delay Hours will exit the rinse aid/audible mode.

To enter the rinse aid/audible

be saved unless power is lost while adjusting the level.
If power is lost, the rinse aid level and audible
feedback will default to the last saved setting. Each
time the rinse aid/audible feedback adjustment mode
is entered the current setting will be recalled. The

adustment

The rinse aid level and audible feedback

feedback

mode:

1. Press and hold the High Temp Wash option pad for
three seconds. An audible chime will sound to
indicate you have entered the rinse aid/audible
feedback adjustment mode.

rinse aid/audible feedback
the manufacturer.

2. The rinse aid has four levels, with "0" being the
lowest (no rinse aid being dispensed) and "3" the
highest. With each consecutive press of the
High Temp Wash option pad, the amount of rinse
aid dispensed into the dishwasher drawers will be
increased.
3. Cycle and option lights will illuminate with each
touch of the High Temp Wash option pad to indicate
the rinse aid level.

10

selected will

chime comes preset from

LI

CYCLES

Choose the cycle that best describes your dish load by pressing the corresponding touchpad (select models) or by
pressing the Cycle select pad (select models) until the desired cycle is lit. (See page 6, Start Up Guk:!e, for how to
begin the cycle).
In addition to choosing a cycle, choose as many available options as necessary for your load.
• Cycles and options cannot be changed after the cycle has started.
• If Anti-Bacterial
(select models) is selected, Sani-Rinse
(select models) will automatically
and can not be cancelled.

Smart
SenseZM_+
(select

models)

An adaptive cycle that adjusts the
number of fills, wash times and
temperatures based on the turbidity
the water. The turbidity sensor
determines the dish soil level and

Sensor Dry
Min. 57

I wash/2

Max. 138"*

4 washes/2

of

rinses
rinses

AntiBacterial+
(select

models)

Normal
Wash%

A long cycle that uses more time, water
and applied heat than the Normal Wash
cycle.
When the cycle monitor recognizes that
the proper conditions have been met, the
Sanitized light will activate at the end of
the cycle. Sanitization may not be
achieved if there is an interruption of the
cycle, power failure or if the incoming
water temperature is below 120° F (49 ° C).
A medium cycle for washing
with normal food soil levels.

(select

models]

Sani-Rinse+
(select

models)

High Temp Wash
Delay Hours

selects the proper wash cycle.
Heavy Wash

be selected

loads

80

4 washes/2

rinses

80

4 washes/2

rinses

Min. 57

I wash/2

Max. 95**

4 washes/2

rinses
rinses

High Temp Wash
Delay Hours

Sensor Dry
Sani-Rinse+
High Temp Wash
Delay Hours

Sensor Dry
Sani-Rinse+
High Temp Wash
Delay Hours

ChinaGentle

Use this cycle for lightly soiled china
and crystal. This cycle uses a gentle
wash and rinse. Towel drying may be
required.

60

I wash/2

rinses

Sensor Dry
High Temp Wash
Delay Hours

Quick
Wash

Quick cycle for light food soil. Towel
drying may be required

38

I wash/2

rinses

Delay Hours

Use this rinse cycle when rinsing place
settings you plan to wash later, or for
freshening up dishes that have been
stored for a period of time.

18

2 rinses

+ Only these cycles has been designated to meet NSF requirements (NSF/ANSI 184 Residential Dishwasher).
* Number of fills will vary depending on the soil level of each load.
**Times are based on immediate availability of 120° F hot water at the start of the cycle. This can be achieved by turning on the kitchen
faucet and running water until hot prior to starting the dishwasher.

° Fan dry can be 30 minutes up to 4 hours depending on
cycles selected. Dry time is optimized per cycle
performance by selecting Sensor Dry.

Notes:
• All times are approximate.
• Fill length varies between different models.

• If the drawer is open for more than 30 seconds during the
intermittent drying time, intermittent dry will shut oft

• Fill time will vary depending on water pressure.
• Cycle times shown will increaseor decrease based on each
load's soil level, water temperature and selected options.

• Even if rinse aid is used, the first few loads may leave
dishes with more water than normal. This effect will
dissipate after a few loads.
11

CYCLES
SOl]SOt

D_

(select

Sani-Rinse

models)

(select

models)

Sensor technology allows the dishwasher to
provide optimum drying performance based on the
water temperature reached during the wash cycle and
use of rinse aid. Rinse Aid helps reduce drying time.
Drying performance will improve after several washes

Sani-Rinse increases the water temperature in the
final rinse, raising the temperature to meet sanitization
requirements. The Sanitized indicator light to the far right
of the control panel will not light if all requirements for
sanitization have not been met. Sani-Rinse can be

using rinse aid.

selected with Normal Wash and Smart Sense" cycles.

At the end of the selected cycle, intermittent drying
will turn the fan on every hour for five minutes for up
to 10 hours or until the drawer is opened for more
than 30 seconds.

important: Sani-Rinse is mandated when using an
Anti-Bacterial cycle and cannot be cancelled.
To select, press the Sani-Rinse

pad after making your

cycle selection. To cancel this option, press the
Cancel/Drain
pad.

High Temp Wash
This option adjusts cycles to provide additional
wash time and temperature to aid in the removal of
heavy and/or baked on soils. Selecting this option will

Child Lock

extend wash time by increasing water temperature
and/or the number of fills in the wash cycle.

The control touchpads can
c
fi ¢
be locked to prevent small
Hold3See.For
Lock
children from starting and stopping the dishwasher or
from changing the cycle and option selections. If this
feature is activated between cycles, the dishwasher

To select, press the High Temp Wash pad after
making your cycle selection. To cancel this option,
press the pad again, or press the Cancel/Drain
pad
to cancel all selected cycles and options.

cannot be operated until the controls are unlocked.
The controls can not be locked after a cycle or delay
has started.
Setting the Child Lock:
1. Press the Sensor
three seconds.

Dry or Lock pad and hold for

2. An indicator light next to the lock graphic will
illuminate when the controls are locked.
To cancel:
1.Pressthe Sensor Dry or Lock pad and hold for
_ree seconds.
2. The indicator

light will go off.

Notes:
If a cycle or option pad is pressed after the
controls have been locked, the indicator light next
to the lock graphic will flash three times and the
dishwasher will beep four times.
• This option does not lock the drawer, only the
dishwasher controls.

12

CYCLES

L|G

Delay Hours

4. The cycle will automatically start and the indicator
light will go out as soon as the delay time expires.

The Delay Hours option can be used to
automatically start the cycle at a more convenient
or to take advantage of reduced energy costs if

time

Notes:
• If 30 seconds elapse between setting the cycle
and options and pressing the Start/Resume or
Cancel/Drain pad, the dishwasher will turn off.

available in your area. This option is also useful for
conserving hot water at times of high household usage
(showers, laundry).

• Press the Start/Resume
pad once, then close the
drawer. Drawer must be closed within 3 seconds

To set up a delay:
1. Select the desired cycle and options for the load.

after pushing Start/Resume or the lights will flash
and the audio alarm sound will be heard.

2. Press the Delay Hours pad until the desired
amount of delay time is selected. There is a 2, 4 and
8 hour delay option. Continue pressing the Delay
Hours

To cancel a delay, press the Cancel/Drain

pad once.

To cancel a running delay and start the cycle, press
the Delay Hours or Start/Resume
pad.

pad until you have made your selection.

3. As soon as the Start/Resume pad is pressed, the
delay time will begin counting down. When
counting down, the indicator light will change from
8Hr to 4Hr to 2Hr when the lower hour is reached.

indicator

Lights on Outside of Drawer Dishwasher (select models)

1) Washing

2) Drying

The Washing cycle indicator light, located on the front of the drawer, will illuminate prior
to the first fill of any cycle. It will remain illuminated until the completion of the final
drain. The washing indicator light will flash when the drawer is opened during the wash
portion of an operating cycle. If the drawer has been opened during a wash cycle,
Start/Resume will need to be pressed before the cycle will resume.
The Drying indicator light, located on the front of the drawer, will remain lit until the
drying portion of the cycle is complete. If the drawer has been opened during a dry
cycle, Start/Resume will need to be pressed before the cycle will resume.
The Clean indicator

3] Clean

light, located on the front of the drawer, will illuminate

when the

minimum dry time has been completed except when the Quick Rinse cycle is selected.
It will remain illuminated until the drawer is open for 30 seconds. If there has been a
power loss, the clean indicator light will not relight until after the next cycle is run.

13

CYCLES,

OPT|

indicator Lights on Control Panel
See page 5 for all model indicator

Delay Hours

Start/Resume

Cancel/Drain
Sanitized
(select models)
Clean
(select models)
Rinse-Aid

Low

lights.

i Only the indicator light for the currently selected delay setting will be illuminated during a
i delay selection. For example, if a 4 hour delay is selected, the 2 hour and 8 hour delay
indicator lights will not be illuminated (see page 13 for operation of the Delay Hours option).
The Start/Resume indicator light, located on the top of the drawer, will be illuminated while the
dishwasher is executing a cycle or delay whether or not the drawer is open. The Start/Resume
'indicator light will not illuminate in any other mode. If the drawer is opened during a wash
cycle, the Start/Resume indicator light will flash until it is pressed to restart the cycle.
The Cancel/Drain

pad will illuminate to indicate that a cancel initiated drain is running.

Illuminates at the end of the cycle when conditions have been met to achieve sanitization.
I The light will remain lit until the drawer has been open for 30 seconds continuously.
The clean indicator light, located on the control panel, will illuminate as soon as any
cycle except Quick Rinse is completed.
Illuminates when the rinse aid dispenser

is low or empty and the drawer is open.

Notes:
When the Anti-Bacterial

(select models), Smart Sense" (select models) or Normal Wash cycle with Sani-Rinse

(select models) is selected, the final rinse cycle is monitored to assure sanitization. The Sanitized light will not
illuminate if sanitization requirements are not met. This could happen if the cycle is interrupted, power failure
occurs or incoming water temperature is below 120° F (/49° F).
The Clean and Sanitized indicator lights will not relight after a power failure until after the next cycle _srun.

14

SAF
Most tableware,

cookware

Aluminum

iTEM

and flatware can be safely washed in your dishwasher.

Yes, if labeled dishwasher
safe or coated with a

High water temperature

Check with the manufacturer.

and detergents

may affect finish.

protective finish.
Cast Iron
China/Stoneware

No
Yes, except antique or
hand-painted.

Seasoning will be removed, and iron will rust.
Always check manufacturer's
recommendation
before washing.
Antique, hand-painted or over-the-glaze patterns may fade. Gold
leaf may discolor.

Crystal

Yes, except antique or
delicate crystal.

Always check manufacturer's
recommendation
before washing.
Some types of leaded crystal may etch with repeated washings.

Filters

Not recommended.

May leave a dingy deposit or stain on dishwasher

Glass

Gold-Plated
Flatware
Pewter, Tin
Plastics

interior.

Yes

A specialty glass called milk glass can yellow with repeated
dishwasher washing.

No

Will discolor.

No
Yes, except disposable
plastic items.

Always check manufacturer's
recommendation
before washing.
Plastics vary in their capacity to withstand high water
temperatures and detergents. Disposable
dishwasher safe for this reason.

Stainless Steel

Yes

plastic items are not

Run a Quick Rinse cycle (rinse only cycle) if not washing
immediately. Prolonged contact with foods containing
vinegar, milk products or juice could damage finish.

Sterling Silver or
Silver Plate

No, if has commercial
"darkening".

salt,

Always check manufacturer's
recommendation
before washing.
Run a Quick Rinse cycle (rinse only cycle) if not washing
immediately. Prolonged contact with food containing salt, acid or
sulfide (eggs, mayonnaise and seafood) could damage finish.
Commercial "darkening" may be removed by detergent.

Wooden Items

No

Wood may warp, crack or discolor.

15

CARE

C

| G

General Recommendations

• The color from some tomato-based food soils may
occasionally adhere to various components of the
dishwasher interior, causing temporary discoloration.

• The dishwasher interior is normally self-cleaning.
Periodically check the bottom of the dishwasher
drawer to see if any large food particles remain.

To minimize

this:

Remove excess tomato-based
• Wipe the edge of the drawer to remove any food soil

food soils from

dishes before loading.

splashes that occurred during loading.
* Run the Smart Sense (select models) or Heavy
Wash (select models) cycle when washing loads
TM

When cleaning the stainless steel exterior, always
wipe with the grain. Never use products containing
chlorine bleach or citric acid.

containing

tomato-based

food soils.

Be sure to use a dishwasher detergent that
contains chlorine to better fight staining.

Standard

Exterior

Stainless Steel
Exterior

Light to moderate

Soft, damp cloth and liquid spray cleaner. Be not
use abrasive powders or cleaning pads.

Daily cleaning and light soil

Soft cloth or sponge and one of the following:
• Mild detergent and water
• A solution of white vinegar and water
• Glass and surface cleaner or similar
multi-surface cleaner. Follow with rinse and dry.
• Do not use products containing chlorine bleach
or citric acid.

Moderate to heavy soil

Soft cloth or damp sponge and stainless steel
cleaner. Follow with rinse and dry.

(select models)

Streaks or fingerprints/restore

Interior

shine

Soft cloth and stainless steel cleaner.

Discoloration

Soft cloth or damp sponge and stainless steel
cleaner. Rinse immediately and dry.

Light to moderate

Soft cloth or damp sponge.

Discoloration or tomato-based stains

Switch dishwasher detergent to chlorine-based
product.

Moderate to heavy soil

• Make a paste with powdered dishwasher
detergent on a damp sponge and clean.
• See the vinegar rinse procedure in Glasses are
cloudy/spotted in Troubleshooting.
• Run a Normal Wash cycle with detergent after
cleaning the interior.

Call 1-800-4-MY-HOME

_ [1-800-469-4663)

to order.

16

CARE

C

| G

Coarse Filter Cup

.

The coarse filter cup is
located on the floor of the
dishwasher drawer. It is

4. To remove the coarse filter cup, unscrew the small
cap turning in a counterclockwise motion. Lift and
remove the coarse filter cup out of the drawer.

designed to collect large
food and non-food

5. Empty the cup of hard objects and food soil. Rinse
cup under hot water.

items that cannot be
processed through the
dishwasher disposal
system, i.e. bone,
broken glass, etc.
Check and empty the
coarse filter cup if food
soil remains on the

6. Place the coarse filter cup back into the coarse filter
plate and tighten the cap, turning in a clockwise
motion. Make sure the coarse filter cup is flush
with the coarse filter plate.
7. Pivot the center rack downward
position.

coarse filter plate. This
ensures foreign objects
are not recirculated through
damage to dish load.

NOteS:

Cleaning

• Pivot the rack
toward the left.
• Pull the rack
toward the front of
the drawer and lift

food soil, cleaning of

up to remove.

rack Cselect models[}

1. Make sure that the dishwasher

Make sure

the rack is empty. Fold the variable tines along
the back flat on the rack. Grasp the front center
of the rack and pivot upward.

the coarse filter plate and coarse filter cup:

Three-piece

however if it is needed:

Pull drawer out to its full extension.

motor and/or spray arm.

If coarse filter plate accumulates
the coarse filter cup is needed.

to its original

Removal of the center rack is not

recommended,

a cycle, causing possible

Important:
Do not start the dishwasher until the
coarse filter cup is securely in place and flush with the
coarse filter plate. Doing so may damage the
dishwasher

Wipe the coarse filter plate with a damp cloth in a
clockwise motion.

To reinstall

drawer is cool before

the

rack:

you clean the coarse filter plate and coarse filter cup.

• Place the hook in the loop on the back left corner
of the rack.

2. Pull drawer out to
its full extension.
Make sure the rack

• Pivot the rack to the right, then pivot downward
to its original position.

is empty. Fold the
variable tines along
the back flat on
the rack. Grasp
the front center of
the rack and pivot
upward to access
the coarse filter cup.

17

CARE
One-piece

C

i

rack

1. Make sure that the dishwasher

drawer is cool before

you clean the coarse filter plate and coarse filter cup.
2. Pull drawer out to its full extension.
tine insert from rack and set aside.

Remove plate

3. Wipe the coarse filter plate with a damp cloth in a
clockwise motion.
4. To remove the coarse filter cup, unscrew the small
cap, turning in a counterclockwise motion. Lift and
remove the coarse filter cup out of the drawer.
5. Empty the cup of hard objects and food soil. Rinse
cup under hot water.
6. Place the coarse filter cup back into the coarse filter
plate and tighten the cap, turning in a clockwise
motion. Make sure the coarse filter cup is flush with
the coarse filter plate.
7. Replace the plate tine insert.

Long Term Storage/Moving
1. Fill detergent cup with a fresh-scented dishwasher
detergent or baking soda, close the lid and select
the Quick Wash cycle. Allow the dishwasher to
complete the cycle.
2. Turn the water supply off and drain the dishwasher.
Press Cancel/Drain
once to activate the drain.
3. Operate the drain twice to ensure most of the water
is removed.
4. Disconnect
drawer.

the electrical

5. Be sure dishwasher

supply and prop open the

is clean and dry.

When turning the water supply to the home off,
the water shut-off at the dishwasher must be
turned

off as well.

18

1Dishwasher

will not fill

•
°
•
°

Press the Start/Resume pad to start the dishwasher.
Drawer must be closed within 3 seconds after pressing Start/Resume.
Be sure drawer is closed securely.
Be sure the water is turned on.

• Check that the pads are properly selected for a cycle and/or option.
° Check your home's circuit breaker or fuse box.
Dishwasher
water

will not drain/

in tub bottom

Dishwasher

adds water at

end of cycle Cselect modelsD
Detergent

Dishwasher

cup is not empty

seems noisy

• If hooked up to a food waste disposer, be sure the knock-out is removed from the
disposer inlet.
° Check for food or foreign object obstruction in the drain filter, coarse filter cup or
disposer.
• Check drain hose for a kink.
° Check your home's circuit breaker or fuse box.
• Check that the cycle is completed (see pg. 13-14).
° This is normal. The sensor in the pump must stay submerged so a short fill of water is
added after the cycle's last drain.
• Check that the cycle is completed (see pg. 13-14).
° Be sure dispenser is not blocked.
• Use fresh powdered detergent stored in a cool, dry place.
° A water valve hiss during fill is normal.
• Water circulation sounds are normal.
° A thumping sound may be a wash arm bumping an item that is extending below the
rack(s). Re-adjust load to avoid obstructing wash arm.
• Chopping or grinding sounds may be heard during the drain portion of the cycle as
the internal chopper blade chops hard items like fruit seeds, nuts, etc.
• Humming during the drain is normal.
° A snap noise is the detergent cup lid hitting the drawer when the dispenser opens
and releases detergent into the drawer during a wash cycle. This is normal.
• Proper installation affects the noise level.

Cycle takes too long

° Sani-Rinse (select models), High Temp Wash or Sensor Dry (select models) has been
selected and the cycle is extended to heat water.
• Rinse aid is not being used and may lengthen dry cycle.
° Check to see that the incoming water temperature is 120° F (49° C).

Dishwasher

has an odor

•
•
•
°

Dishwasher

leaks

° Check that the dishwasher is level. (Refer to the Installation Instructions.)
° Suds can cause the dishwasher to overflow. Measure the detergent carefully and use
only detergents designed for use in a dishwasher. Less detergent is needed in soft
water. Try another brand of detergent if sudsing continues.
° To avoid rinse aid leaking from the dispenser, be sure the plug is securely attached [pg. 10).
• Make sure that itemsdo not extend above the insidetop edge of the drawer.

indicator lights flashing
Cselect models)

Run dishes being held in the dishwasher through a Quick Rinse cycle.
Many dishwashers have a "new" smell when first installed.This will dissipate with use.
Dishwasher may not be draining properly. (See Dishwasher will not drain section above.)
For a strong odor, place baking soda in both sides of the detergent cup. Select Quick
Wash cycle and allow the water to circulate for about 10 minutes. Interrupt the cycle by
opening the drawer and let it stand overnight. Restart the dishwasher by closing the
drawer and pressing Start/Resume. Allow it to complete the cycle. Another alternative is
to use a dishwasher cleaning product.

° If a cycle other than the currently selected cycle pad is pressed after the cycle and
options are locked, the currently running cycle light will flash three times and four
audible beeps will be heard.
° The Washing, Drying and Start/Resume indicator lights will flash if the drawer is
opened mid-cycle. Start/Resume will need to be pressed before the cycle will resume.
° Drawer must be closed within 3 seconds after pressing Start/Resume.
Cont.
19

TROU

Glasses are cloudy/
spotted

Food soil remains
on dishes

•
•
•
•

Select High Temp Wash option.
Check water temperature. Incoming water should be 120° F (49° C).
A/ways use rinse aid. 07erify rinse aid dispenser setting, pg. 10).
Confirm that the cloudiness is removable by soaking the item in white vinegar for
approximately 5 minutes. If removed, the problem is due to hard water. Adjust detergent
amount being used to match water hardness (pg. 9). Be sure detergent is fresh, stored
properly and is a high quality brand.
• If cloudiness is not removable, it is etching. This is an erosion of the surface of the glassware
and can be caused by water that is too hot, from using too much detergent or by
prewashing. Detergent needs food soil to act upon. If etching has occurred, the glassware is
permanently damaged. To prevent further etching, adjust the detergent amount to match
the water hardness, stop prewashing and use water heating options only when incoming
water temperature is below 120° F (49° C).
•
°
°
•
•
•
•
•
•
•

Items washed in the
dishwasher or the
dishwasher tub itself
are s_ined/discolored

•
•
•
•

Items not properly
dried/moisture
is
present on the
dishwasher interior
after the dry cycle

•
•
•
•
•
•
•
•
°
•
•

Dishware

is chipped

Sanitized
light does
not illuminate at the
end of the cycle
(select models)
Dishwasher drawer
will not dose

•
•
•
°
°
°
°

Check water temperature. Incoming water should be 120° F (49° C).
Run hot water at the sink before starting the dishwasher.
Check water hardness and adjust detergent amount accordingly (pg. 9).
Use fresh powdered detergent stored in a cool, dry place.
Select proper cycle for the soil level (pg. 11).
Select Smart Sense z"(select models) or proper cycle for soil level, proper option,
Sani-Rinse (select models) or High Temp Wash.
Load items so they do not block the wash arm (pgs. 7-8).
Load the utensil basket with knife handles up and spoon and fork handles down.
De net place glasses over tines.
Before loading, scrape off burnt on foods and wipe the starchy film from utensils used with
pasta, rice and oatmeal. These soils require more energy than the rest of the load to clean.
Aluminum utensils or pans can leave marks when they rub against other items. Leave a
slight space between items.
Iron deposits in the water can leave a yellow, brown or orange film on dishes or the
dishwasher tub. A rust filter may be needed. Check with a water treatment company.
Separate silver or silver-plated silverware from stainless steel. These metals can be damaged
by contact with each other during washing.
Color from tomato sauces may adhere to the interior parts of the dishwasher (pg. 16). If light
staining has occurred, leave the drawer open to oxidize the stain away. Use a dishwasher
detergent that contains chlorine to better fight staining.
Certain dishwasher detergents may stain silver. Try another brand of detergent.
Be sure Sensor Dry (select models) is selected.
Water droplets may form on the inner tub as part of the drying process. This is normal.
Be sure the Rinse Aid dispenser is filled.
Use a rinse aid separate from the detergent regularly to improve drying performance. Adjust
Rinse Aid setting to High (see pg. 10) when rinse aid is present in the dispenser.
Check water temperature. Incoming water should be 120° F (49° C).
Select Hi Temp Wash option.
Increase detergent amount to match water hardness (pg. 9).
Load properly. (pgs. 7-8)
Plastic and items with non-stick surfaces are difficult to dry because they have a porous
surface which tends to collect water droplets. Towel drying may be necessary.
Glasses and cups with concave bottoms hold water and require towel drying. Locate these
items on the more slanted side of the rack for improved results.
Load dishes according to instructions so they do not strike each other (pgs. 7-8).
Washing fine antique china/crystal in the dishwasher is not recommended.
De not load glasses over the tines.
De net overload.
Make sure variable tines (select models) are properly adjusted and in place before loading.
Sani-Rinse (select models) was not selected.
Sanitization can only be achieved with the Smart SenseT"(select models),
Anti-Bacterial (select models) or Normal Wash cycles.
Sanitization may not be achieved if there is an interruption of the cycle, power failure or if
incoming water temperature is below 120° F (49° C).
Be sure items do not extend above the inside top edge of the drawer.

20

iiiiiiil
iiiiiiiiiiiiii!iiii!iiiiiii!!i!iiiiiiiii_iiiii!iiiiii!i_
_______
_

__
_________
_ii!
i iiiiiiii!iil
i!iii
ilii
Your Home

....

For repair-in
your home-of
all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter

who made it, no matter

who sold it!

For the replacement parts, accessories and
owner's manuals that you need to do-it-yourse If.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.

1-800-4=MY-HOME ® (1-800-469-4663)
Call anytime,
_V_JW,

iiiiii!iiiiiiHili!!iiii!i

day or night (U.S.A. and Canada)
sear

om

_lJ_J,

Sears Parts & Repair

iiiiiiiiiiiiii!iiiiiii!iii
..........................

s,c

sea

r s,c_

Service

Center

...................

1-8oo-488-1222
Callanytime,

dayornight(U.S.A,

only)

ii:iiiiiiiiiiiii!iiiiiii!iii

www.sears.col_

........

To purchase a protection

'_

agreement

(U.S.A.)

or maintenance agreement (Canada) on a product serviced by Sears:
1-800=827-6655
(U.S.A.)
1-800=361-6665
(Canada
Pare pedir servicio de reparacien
a domicilio, y pare ordenar piezas:

1-888-SU-HOGAR

Au Canada

pour service en franga_s:

1-800-LE-FOYER

®

M°

(1-800-533-6937)
www.sears,ca

!:!!iiiiii!iiiiiiiiii!iiiii ,,
(1-888-784-6427)

Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC
6) Marca Registrada
/ TM Mama de Fabrica / SM Marca de Servicio
de Sears
Brands,
MC Marque de commerce
/ MDMarque deposee de Sears Brands, LLC
_> Registered

21

LLC
6) Sears

Brands,

LLC



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 22
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Fri Jun 29 00:36:11 2007
Author                          : 
Title                           : 
Subject                         : 
EXIF Metadata provided by EXIF.tools

Navigation menu