Kenwood USA 24673110 User Manual 11730
Kenwood USA Corporation 11730
8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 11730 |
| Application ID | Uuz9cHK5MlzQToKZ/kQXEQ== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 6.97kB (87125 bits) |
| Date Submitted | 1998-11-05 00:00:00 |
| Date Available | 1999-01-20 00:00:00 |
| Creation Date | 2001-07-08 20:16:02 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-07-08 20:16:07 |
| Document Title | 11730.pdf |
| Document Author: | VicodinES /CB /TNN |
UHF FM REPEATER UNlT TKR-830 INSTRUCTION MANUAL FCC ID: ALHZ4673110 2.1033tcit3) MANUAL ixiz'NWOOD KENWOOD CORPORATION (9 86240“) 00 (K) 09 08 07 its 05 U4 03 02 m no THANK YOU! We are grateful you purchased this KENWOOD repeater, We believe this easy~toruse repeater will be highly ehective in your communications system, and wiIl keep personnel operating at peak efficiency. KENWOOD incorporates the latest in advanced technology into all oi our products. As a result, we teet strongly that you will be pleased with the quality and features of this product. FEATURES - You can easily program channel data using the PLL synthesizer method. - You can select 1 at 32 preset channels using the internal DIP SWIICh or the external control line. - The main program can be written to the Flash memory through an external source, - RX PLL lock voltage, RX input srgnal strength, TX PLL lock voltage, and TX output power can be monitored on a PC. . The interface port can be used With external eqUipment, such as a repeater controller. - The repeater has multi-mode capability. Wide. 25 kHz Narrow: 12.5 kHz - You can adtust the tolIOWing lunctions from a PC‘ - Squeich (Digital/Analog/ RSSI) - External Signal Balancing . External MaXimurn Deviation - External Signaling DeViation - RF Power - RX Audio Signal Output (RA) - RX Detector Signal Output (RD) - TX Modulation Signal Output (TA) - TX Signal lnput (TD) INSTALLATION Please consult your dealer tor installing the repeater and antenna UNPACKING AND CHECKING EQUIPMENT Vote: The following unpack/fig information lS ia/ use by your (ENWODD dealer, an aufi‘iorzed KENWOOD service facility, or the Iareluily unpack the repeater We recommend that you Jontity the items listed in the following table before liscarding the packing material Il any items have been amaged during shipment, tile a claim with the carrier , ' Item ~ . Part Number , V~Duanlity Fuse (4 A) Foe4027—x5 1 Handie KOI—OdZt-XS 2 Power cable assembly E30—3344-X5 1 Lead Wire With connector Eat-322896 1 Instruction manual 562—1 01 D~><>< 1 CONTROLS AND FUNCTIONS l Front Panel << Front Panel Display >> 6) Speaker (2) REF (reference) indicator Lights red when using an external reference frequency Lights green when using the internal relerence frequency @ BUSY indicator Lights green when the channel is in use, (4) TX (transmit) indicator Lights red while transmitting. @ POWER indicator Lights green when the power is turned ON (5) Display Two, 7-segment digits display the channel number or status. ® TEST switch Press to transmit an unmodulated Signal With no external microphone connected. VOL (volume) control Rotate clockwise, until a click sounds, to turn the power ON, Rotate clockwise to increase the volume, and counterclockwise to decrease the volume Rotate counterclockwise fully to turn the power OFF ® MIC (microphone) jack harms-pi a mmrmu I Rear Panel << Rear Panel Display >> (D RX IN jack Connect a RX antenna to this BNC receptacle (2) EXTSPEAKER jack Test input/output lack. Connect an external speaker to this Jack (3) LOGIC lNTERFACE jack Connect an external programming devtce to this D825 interface, 6) EXT.REF IN jack Connect an external reference lrequency (10 MHz) to thls ENC receptacle ® DC 13i8V iack Connect a 13.8 V DC power supply to this jack, ® FUSE Insert a 3 A blade Iuse into this luse holder (7) TX OUT iack Connect a TX antenna to this BNC receptacle. REPEATER OPERATION Note, 0 The repeater trans/ers messages only when extemal equipment soon as a repealer conI/ol/er is connected 0 Please consult your dealer for programming the repeater Rotate the VOL control clockwtse‘ until a click sounds to swttch the power ON. - The POWER indicator lights greens Rotate the VOL control counterclockwrse Iully to switch the power OFF The TX indicator lights red while transmmlng Adlust the VOL control to listen to received messages. TRANSCEIVER OPERATION l Receive Adjust the volume to your desired level while monitoring background noise. You may need to readlust the volume when you receive a message lrom your dispatcher or another member in your fleet. - The BUSY indicator lights while the channel is being used. I Transmit 1 Listen to the channel betore transmitting. to make sure it is not being used, 2 Press the P17 switch and speak in your normal speaking voice. - FCC regulations require that you identity your station (your assrgned call sign) as well as the station you are calling, . The TX indicator lights while transmitting. 3 When you tinish speaking’ release the P‘IT swrtch. - Receive mode will automatlcally resume MICROPHONE Connect the KENWOOD optional mlcrophone to the MIC jack on the front panel. << Microphone Display >> PRECAUTIONS 0 Do not expose the unit to rain or moisture, to prevent fire or electric shock. - Do not under any circumstances open the unlt. to avoid risk oi electnc shock. - Do not place any oblects on top at the unit, to ensure proper ventilation 0 Do not expose the unit to long pertods ot direct sunlight, nor place it close to heating appliances - Do not place the unit ln excessively dusty or humid areas. nor on unstable surfaces - It an abnormal odor or smoke is detected coming lrom the unit. switch OFF the power immediately and remove the power cord from the AC outlet. Contact your KENWOOD servtce center or dealer, NOTICES TO THE USER FCC WARNING This Equtpment generates muses rad/(J frequency energy Changes of modifications Io tnis equipment may cause narmlul intenerence unless tna modifications are expressly approved in the lllSI/‘LICI/Dll manual The user could lose the autnonty to opp/ate tnis equipment it an unaulhnrl'zed change at iiiadlli‘cailoii is made. WA RNING: O GOVERNMENTLAWPFOH/E/TS THE OPERATION OF UNL/CENSED RAD/O TRANSM/TTERS WITHIN THE TERRITORIES UNDER GOVERNMENTCONTROL v lLLEGAL OPERATION ls PUN/SHABLE BYFINE Oi? lMPFi/SONMENT OR 50 TH, 0 REFER SERVICE TO OUALIF’ED TECHN/CIANS ONLY.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:07:08 20:16:02 Producer : Acrobat Distiller 4.0 for Windows Author : VicodinES /CB /TNN Title : 11730.pdf Modify Date : 2001:07:08 20:16:07-04:00 Page Count : 2EXIF Metadata provided by EXIF.tools