Kenwood USA 30633110 Repeater User Manual 60911

Download:
Mirror Download [FCC.gov]
Document ID	60911
Application ID	iP6KUTLAS8gCm69FpLRzdg==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.29kB (103609 bits)
Date Submitted	1999-09-28 00:00:00
Date Available	2000-01-27 00:00:00
Creation Date	2001-06-06 16:21:05
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-06-06 16:21:10
Document Title	60911.pdf
Document Author:	VicodinES /CB /TNN

VHF FM REPEATER/ UHF FM REPEATER
TKR-740/ TKR-84O
INSTRUCTION MANUAL
KENWOOD
KENWOOD CORPORATION
to Bee-moon (K)
09 as 07 06 05 04 03 oz 01 no
_ FCC ID: ALH -
2.1033lclt3) MANUAL "
We are grateful you purchased this KENWOOD repeater.
We believe this easy-to-program repeater will be highly
effective in your communications system, and will keep
personnel operating at peak efficiency.
KENWOOD incorporates the latest in advanced
technology into all of our products. As a result, we feel
strongly that you will be pleased with the quality and
features of this product.
FEATURES
- You can easily program channel data using the KPG-47D
version 2.00 or later (optional) on a PC.
- Vou can recall 1 ol 32 preset channels using eithera FF key or
the external control line. '
- The firmware can be written to the Flash memory through an
external source.
. QT/DQT signalling can be pro rammed on each channel, It
decodes up to 16 different QT DOT tones at one time.
- When using the KFG-47D version 2.00 or later (optional), RX
PLL lock voltage. nx input signal strength. Tx PLL lock
voltage, TX output power, and the power supply voltage can be
monitored on a PC.
- The interface port can be used with external equipment, such
as a repeater controller.
. The repeater has multt-mode capability.
Wide: 30 kHz. 25 kHz/ Narrow: 15 k 2.12 5 kHz (TKFi-740)
Wide' 25 kHU Narrow: 12.5 kHz (TKFi-840)
- You can adjust the following lunctions from a PC:
- equelcli (Analog/ RSSI)
. Signalling Balance
- Digital Pager Balance
- Maximum Deviation
. Signalling Deviation (TD)
. QT Deviation
- DOT Deviation
- Cw Deviation
- Digital Pager Deviation
. TestTone Deviation
. Remote TA
- nF Power
- nx Audlo Signal Output (RA)
- RX Detector Signal Output (RD)
- TX Audio Input (TA)
- Voting Tone Level
PRECAUTIONS
. Do not expose the unit to rain or moisture: to prevent fire or
electric Shock.
. Do not open the unit under any circumstances; to avoid risk or
electric shock.
. Do not expose the unit to long periods of direct sunlight, nor
place it close to heating appliances.
0 Do not place the unit in excessively dusty and/or humid areas,
nor on unstable surfaces.
- If you detect an abnormal odor or smoke coming from the unit,
disconnect the power from the unit immediately. Contact your
KENWOOD service center or dealer.
NOTICES TO THE USER
FCC WARNING
This equipment generates muses radio frequency energy. Changes or
modifications to this equipment may cause harmful Interference unless
the modifications are expressly approied in the Instruction manual, The
user could lose the amhon'ly lo Dperale [his equipment ilan
unautlion’zod change or modification is made
WAHNING:
0 GDVERNMENTLAW PHOHIBITS THE OPERATION OF
UNLICENSED HAD/O THANSMITTEHS WITHIN THE
TERRITORIES UNDEFI GOVERNMENT CONT HOL.
0 ILLEGAL OPERATION IS PUNISHABLE EV FINE DH
IMPRISONMENT OR BOTH.
0 REFER SERVICE TO QUALIFIED TECHNICIANS ONLY.
UNPACKING AND CHECKING EQUIPMENT
Nal‘e: The [allowing unpacking ln/ormatr'm is [or use by your KENWOOD
dealer, an authorized KENWOOD service raciriry, or the factory
Carefully unpack the repeater. We recommend that you
identify the items listed in the following table before
discarding the packing material. If any items are missing
or have been damaged during shipment, file a claim with
the carrier immediately.
B1 0-2590»X4
Front glass
Fuse (4 A) F06—4027-X5
Handles and screw set K01-0421-X5
Power cable assembly E30-3344-X5
Lead wire with connector E31-3228-X5
E59—O410-X5
N08-0543-X4
8624 1 SSrXX
Square plug
Dressed screw
instruction manual
INSTALLATION
-To install the handles onto the front panel of the receiver,
align the handles with the holes on the front panel, then
secure the handles using the supplied screws.
Please consult your dealer for installing the repeater and
antenna.
MICROPHONE
Connect a KENWOOD optional microphone to the
MICROPHONE jack on the front panel.
CONTROLS AND FUNCTIONS
I Front Panel
O @ U D @ a°o°°°o°o
D e 0430 (750 e 025“
G) Speaker
® REF (reference) Indicator
Lights red when using an external relerence
frequency. Lights green when using the internal
relerence frequency.
@ BUSY Indicator
Lights green while a signal is being received.
@ TX (transmit) indicator
Lights red while transmitting.
6) POWER indicator
Lights green when power is applied.
© Display
Two, 7-segment digits display the channel number
or status.
I Hear Panel
(nun.
(D RX IN jack
Connect a RX antenna or a duplexerto this BNC
receptacle.
® TEST/SPKFi jack
Test input/output jack. Connect an external
speaker to this jack.
® REMT t/o jack
Connect an external remote controller to this jack.
(D CONTROL uo jack
Connect an external programming device or
repeater controller to this DBA25 interface.
REPEATER OPERATION
Note: Please consult your dealerlur pmgramwhg the repeater.
When power is applied to the unit, the POWER
indicator lights green,
Turn the VOLUME control clockwise until a click
sounds, to unmute the volume. Rotate to adjust the
volume. Turn the VOLUME control counterclockwise
fully to mute the volume.
The BUSY indicator lights green while receiving a
signal, and the TX indicator lights red while
transmitting.
KENWOOD© O
wilt
NO
Programmable Function keys
Press these keys to activate their programmable
tunctions.
TEST switch
Press to transmit an unmodulated signal with no
external microphone connected.
@ VOLUME control
Turn clockwise until a click sounds, to unmute the
volume. Rotate to adjust the volume. Turn
counterclockwise fully to mute the volume.
® MICROPHONE lack
Connect a microphone to this B—pin modular jack.
® EXTREF INjack
Connect an external relerence frequency (10 MHz,
—10 dBm or higher) to this BNC receptacle.
© Dc 13.sv iack
Connect a 13.8 V DC power supply to this jack.
@ FUSE
Insert a 4 A blade iuse into this fuse holder.
TX our jack
Connect a TX antenna or a duplexerto this BNC
receptacle.
TRANSCEIVER OPERATION
l Receive
Adjust the volume to your desired level. You may
need to readjust the volume when you receive a
message from your dispatcher or another member in
your lleet,
- The BUSY indicator lights while a signal is being
received.
1. Transmit
1 Listen to the channel belore transmitting, to make
sure it is not being used.
2 Press the PT‘I’ switch and speak in your normal
speaking voice.
- FCC regulations require that you identity the
station you are calling as well as your own
station (your assigned call sign).

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:06:06 16:21:05
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : VicodinES /CB /TNN
Title                           : 60911.pdf
Modify Date                     : 2001:06:06 16:21:10-04:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools