Kenwood USA 30643130 Repeater User Manual 59858
Kenwood USA Corporation Repeater 59858
8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 59858 |
| Application ID | 15xZsCBbApmoqoaV7FpxZA== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 8.8kB (110010 bits) |
| Date Submitted | 1999-09-21 00:00:00 |
| Date Available | 1999-12-27 00:00:00 |
| Creation Date | 2001-06-05 12:06:23 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-06-05 12:06:28 |
| Document Title | 59858.pdf |
| Document Author: | VicodinES /CB /TNN |
VHF FM REPEATEH/ UHF FM REPEATEFI vTKR-740/ TKFi-840 KENWOOD INSTRUCTION MANUA- KENWOOD CORPORATION — FCC ID: ALH30643130 2.1033ic)(3) MANUAL THANK YOU! We are grateful you purchased this KENWOOD repeater. We believe this easy-to-program repeater will be highly effective in your communications system, and will keep personnel operating at peak efficiency. KENWOOD incorporates the latest in advanced technology into all of our products. As a result, we feel strongly that you will be pleased with the quality and features of this product. $EEAIURESV. 0 You can easin program channel data using the KPG-47D version 2.00 or later (optional) on a PC. - You can recall 1 of 32 preset channels using either a PF key or the external control line. ' o The llrrnware can be written to the Flash memory through an external source. - QTIDQT signalling can be p rammed on each channel. It decodes up to to difterenIQT 0T tones at one time. - When using the KPG—47D version 2.00 or later (optional). FIX PLL lock voltage, RX input signal strength. TX PLL lock voltage. TX output power. and the power supply voltage can be monitored on a PC. - The interlace port can be used with external equipment. such as a repeater controller, . The repeater has multi-motte capability. Wide: 30 kHz, 25 kHfl Narrow: 15 kHz.|2.5 kHz Wide: 25 kHzJ Narrow: 12.5 kHz - You can adjust the following functions from a PC: . Squelch (Analog/ RSSI) - signalling Balance - Digital Pager aaiance . Maximum Deviation - Signalling Deviation (TD) - QT Deviation 0 DOT Deviation 0 CW Deviation - Digital Pager Deviation Test Tone Deviation Remote TA RF Power ax Audio Signal Output (RA) RX Detector signal Output (no) - 'rx Audio input (TA) - Voting Tone Level PRECAUTIONS . Do not expose the unit to rain or moisture: to prevent fire or electric shock. (TKR-740) (TKFt-EAO) a Do not open the unit under any circumstances; to avoid risk of electric shock. - Do not expose the unit to long periods of direct sunlight. nor place It close to heating appliances. - Do not place the unit In excessively dusty andlor humid areas, not on unstable surfaces. . It you detect an abnormal odor or smoke coming lrom the unit, disconnect the powertrom the unit immediately. Contact your KENWOOD service center or dealer. NOTICES JO THEVUSEB FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifican‘orrs to this aqu‘pmerrl my cause harmful interference unless the rnaifirrutlorrs are expressly approved r'n the Instruction manual. The we! could lose the aumanYyto operate this equipmenfilan unauthorized change or modification is nude, WARNING: 0 GOVERNMENT LAWPROHIBITS THE OPERATION OF UNLICENSED FIADIO THANSMITTERS WITHIN THE TEHHIYOFIIES UNDER GOVERNMENT CONTROL. 0 ILLEGAL OPERATION IS PUNISHABLE EY FINE OR IMPEISONMENT OR BOTH. REFER SERVICE 70 QUALIFIED TECHNICIANS ONLY UNPACKING ANOCHEQKINQEOUIPMENT Note.- The following unpacking information r‘s foruse by your KENWOOD dealer, an authorized KENWOOD service facility, or me Mary Carefully unpack the repeater. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately. B1 0-2590—X4 F06-4027-X5 KO1 -0421 -X5 E30»3344-X5 Front glass Fuse (4 A) Handles and screw set Power cable assembly Lead wire with connector E31 -3228-X5 Square plug ESQ-O41 O-XS Dressed screw N08-0543-X4 |nstruction manual 862-1136—XX INSTALLATION . ~ To install the handles onto the front panel of the receiver. align the handles with the holes on the front panel, then secure the handles using the supplied screws. Please consult your dealer for installing the repeater and antenna. MICROPHONE Connect a KENWOOD optional microphone to the MICROPHONE jack on the front panel. CONTROLSAND FUNCTIONS I Front Panel D @ D 0 © o°a°°o°a m ©_Kenwooo@ O § % §c O czoznzizoznze <5 @ © @ E,“ G) <9 (760 (7130 (<9 °o°o°o°o° i-,© @ D as <5 <5 <5 31> a; 37) tt (D Speaker ® Programmable Function keys © REF (reference) Indicator Lights red when using an external reference frequency. Lights green when using the internal reference frequency. © Busv Indicator Lights green while a signal is being received. 6) TX (transmit) Indicator Lights red while transmitting. 6) POWER indicator Lights green when power is applied. © Display Press these keys to activate their programmable functions. TEST switch Press to transmit an unmodulated signal with no extemal microphone connected. VOLUME control Turn clockwise until a click sounds, to unmute the volume. Rotate to adjust the volume. Turn counterclockwise fully to mute the volume. ® MICROPHONE lack Connect a microphone to this vain modular jack. Two, 7-segment digits display the channel number 01 STETUS. l Rear Panel mm in @_@ ties ® RX IN lack Connect a RX antenna or a duplexer to this BNC receptacle. ® TESTISPKR jack Test input/output jack. Connect an external speaker to this jack. @ HEMT IIO iack Connect an external remote controller to. this jack. (D CONTROL v0 jack Connect an external programming device or repeater controller to this 08-25 intertace. HEPEATER OPERATION Note: Please consult your dealer for programming the repeater. When power is applied to the unit, the POWEFt indicator lights green. Turn the VOLUME control clockwise until a click sounds, to unmute the volume. Rotate to adjust the volume. Turn the VOLUME control counterclockwise fully to mute the volume. The BUSY indicator lights green while receiving a signal, and the TX indicator lights red white transmitting. © EXT.FIEF IN lack Connect an extemal reference frequency (10 MHz, 40 dBm or higher) to this BNC receptacle. 6) DC 13.9v jack Connect a 13.8 V DC power supply to this jack. ® FUSE Insert a 4 A blade fuse into this fuse holder. Tx our jack Connect a TX antenna or a duplexer to this BNC receptacle. TRANSCEIVER OPERATION I Receive Adjust the volume to your desired level. You may need to readjust the volume when you receive a message from your dispatcher or another member in your fleet. - The BUSY indicator lights while a signal is being received. Tl Transmit 1 Listen to the channel before transmitting, to make sure it is not being used. 2 Press the NT switch and speak in your normal speaking voice. - FCC regulations require that you identify the station you are calling as well as your own station (your assigned call sign). - The TX indicator lights while transmitting.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:06:05 12:06:23 Producer : Acrobat Distiller 4.0 for Windows Author : VicodinES /CB /TNN Title : 59858.pdf Modify Date : 2001:06:05 12:06:28-04:00 Page Count : 2EXIF Metadata provided by EXIF.tools