Kenwood USA 30923130 UHF FM Handheld Transmitter User Manual TK 2102 3102 E 00 Cover

Kenwood USA Corporation UHF FM Handheld Transmitter TK 2102 3102 E 00 Cover

Instruction Manual

INSTRUCTION MANUAL© B62-1163-10 (K,M)09 08 07 06 05 04 03 02 01VHF FM TRANSCEIVERKENWOOD CORPORATIONTK-2102/TK-2107UHF FM TRANSCEIVERTK-3102/TK-3107
THANK YOU!We are grateful for your purchase of this KENWOODtransceiver. We believe this easy-to-use transceiverwill provide you with dependable and reliablecommunications.KENWOOD MEANS WIRELESSFounded more than 50 years ago, KENWOOD’s Carand Home Audio products are in demand around theworld. KENWOOD is also a major developer andproducer of wireless and digital wirelesscommunications products. KENWOOD provides topquality Amateur Radio products for the serious hobbyist,and commercial radio products and systems forbusiness, industry, and public safety users, worldwide.MODELS COVERED BY THIS MANUALTK-2102: 2-channel VHF FM TransceiverTK-2107: 16-channel VHF FM TransceiverTK-3102: 2-channel UHF FM TransceiverTK-3107: 16-channel UHF FM Transceiver
iPRECAUTIONS• Refer service to qualified technicians only.• Do not operate the transceiver or charge a batterypack in an explosive atmosphere (gases, dust,fumes, etc.).• Turn OFF the transceiver while taking on fuel orwhile parked in a gasoline service station.• Do not modify or attempt to adjust this transceiver forany reason.• Do not expose the transceiver to long periods ofdirect sunlight, nor place it close to heatingappliances.• Do not place the transceiver in excessively dusty,humid, and/or wet areas, nor on unstable surfaces.SAFETY: It is important that the operator is aware of,and understands, hazards common to the operation ofany transceiver.
iiCONTENTSUNPACKING AND CHECKING EQUIPMENT................... 1Supplied Accessories...................................... 1PREPARATION .................................................. 3Charging the NiCd Battery Pack .......................... 3Installing/ Removing the Battery Pack .................. 5Installing the Antenna ..................................... 6Installing the Belt Clip..................................... 6Installing the Cover over the Speaker/Microphone Jacks.......................................... 7Installing the Optional Speaker/ Microphone........... 7GETTING ACQUAINTED (TK-2102/ TK-3102) ................ 8TK-2102/ TK-3102 OPERATION ............................... 9GETTING ACQUAINTED (TK-2107/ TK-3107) ...............10TK-2107/ TK-3107 OPERATION ..............................11AUXILIARY FUNCTIONS ......................................12Time-out Timer............................................12Battery Save ...............................................12Low Battery Warning .....................................12Monitor.....................................................13Quiet Talk (QT) and Digital Quiet Talk (DQT) ..........13OPTIONAL ACCESSORIES ....................................14TROUBLESHOOTING GUIDE..................................15FREQUENCY CHART ..........................................16
1UNPACKING AND CHECKING EQUIPMENTCarefully unpack the transceiver. We recommend thatyou identify the items listed in the following table beforediscarding the packing material. If any items aremissing or have been damaged during shipment, file aclaim with the carrier immediately.■Supplied AccessoriesmetI rebmuNtraP ytQannetnA/2012-KT 7012-KTM,K5X-5960-09T12M,2K5X-1860-09T/2013-KT 7013-KT2M,2K,M,K5X-4960-09T3M,3K5X-3860-09T4K5X-4860-09TregrahcyrettaB )ylno2013-KT/2012-KT( 5X-8950-80W1rotpadaCA 2013-KT/2012-KT( )ylnoK5X-9740-80W 1M5X-8550-80W)A51-BNK(kcapyrettabdCiN )ylno2013-KT/2012-KT( 5X-0490-90W1revockcajenohporcim/rekaepS3X-1530-90B1gnikcolenohporcim/rekaepS tekcarb 4X-3944-12J1pilctleB3X-4260-92J1teswercS5X-6930-99N1dracytnarraWK––1launamnoitcurtsnIXX-3611-26B1Note: A market code (K, K2, K3, K4, M, M2, M3) can be found onthe label attached to the package box.
2Belt clipSpeaker/ microphonejack coverScrew setSpeaker/ microphonelocking bracketAC adaptor (K market)(TK-2102/ TK-3102 only)NiCd battery pack(KNB-15A)(TK-2102/ TK-3102 only)Antenna(TK-2102/ TK-2107) Battery charger(TK-2102/ TK-3102 only)Antenna(TK-3102/ TK-3107)AC adaptor (M market)(TK-2102/ TK-3102 only)
3■Charging the NiCd Battery PackThe battery pack is not charged at the factory;charge it before use.Initially charging the battery pack after purchase orextended storage (greater than 2 months) will notbring the battery pack to its normal operatingcapacity. After repeating the charge/discharge cycletwo or three times, the operating capacity willincrease to normal.◆DO NOT RECHARGE THE BATTERY PACK IF IT ISALREADY FULLY CHARGED. DOING SO MAY CAUSETHE LIFE OF THE BATTERY PACK TO SHORTEN OR THEBATTERY PACK MAY BE DAMAGED.◆AFTER RECHARGING THE BATTERY PACK,DISCONNECT IT FROM THE CHARGER. CHARGING THEBATTERY PACK FOR MORE THAN 5 DAYS MAY REDUCETHE BATTERY PACK LIFE DUE TO OVERCHARGING.Note:◆The ambient temperature should be between 41 and 104°F(5 and 40°C) while charging is in progress. Charging outsidethis range may not fully charge the battery.◆Always switch OFF the transceiver equipped with a NiCd batterypack before charging. Using the transceiver while charging itsbattery pack will interfere with correct charging.◆The battery pack life is over when its operating time decreaseseven though it is fully and correctly charged. Replace thebattery pack.PREPARATION
4Note: It takes approximately 6 hours to fully charge the optionalKNB-14 battery pack.Plug the AC adaptor cable intothe adaptor jack located on therear of the charger.Plug the AC adaptor into an AC outlet.Slide the NiCd battery pack or transceiver with a NiCd batterypack into the charger.• Make sure the battery pack contacts are in contact with the charging terminals.• The charger LED lights and charging begins.After charging the supplied KNB-15A battery pack for 8 hours, remove it or the transceiver equipped with it from the charger.• The charger does not turn OFF automatically after charging is completed.Unplug the AC adaptor from the AC outlet.
5■Installing/ Removing the Battery PackThe average life of the supplied KNB-15A NiCdbattery pack is 8 hours. Average times arecalculated using 5% transmit time, 5% receive time,and 90% standby time.◆DO NOT SHORT THE BATTERY TERMINALS ORDISPOSE OF THE BATTERY BY FIRE.◆NEVER ATTEMPT TO REMOVE THE CASING FROM THEBATTERY PACK.Match the four grooves of the battery pack with the corresponding guides on the back of the transceiver.Slide the battery pack along the back of the transceiver until the release latch on the base of the transceiver locks.To remove the battery pack, pull back on the release latch and slide the pack away from the transceiver.wq
6■Installing the AntennaScrew the antenna into theconnector on the top of thetransceiver by holding theantenna at its base and turningit clockwise until secure.Note: The antenna is neither a handle,a key ring retainer, nor a speaker/microphone attachment point. Usingthe antenna in these ways may damagethe antenna and degrade yourtransceiver’s performance.Antenna■Installing the Belt ClipIf necessary, attach the beltclip using the two supplied3 x 8 mm screws.Note:◆If the belt clip is not installed, itsmounting location may get hotduring continuous transmission orwhen left sitting in a hotenvironment.◆You must remove the belt clipbefore removing the battery pack.DO NOT USE GLUE WHICH IS DESIGNED TO PREVENTSCREW LOOSENING WHEN INSTALLING THE BELT CLIP, ASIT MAY CAUSE DAMAGE TO THE TRANSCEIVER. ACRYLICESTER, WHICH IS CONTAINED IN THESE GLUES, MAYCRACK THE TRANSCEIVER’S BACK PANEL.Beltclip
7If you are not using a speaker/microphone, install the coverover the speaker/ microphonejacks using the supplied3 x 6 mm screw.Note: To keep the transceiver waterresistant, you must cover the speaker/microphone jacks with the suppliedcover.■Installing the Cover over the Speaker/ Microphone Jacks■Installing the Optional Speaker/ MicrophoneInsert the speaker/ microphone plugs into the speaker/ microphone jacks.Attach the locking bracket using the supplied 3 x 6 mm screw.Note: The transceiver is not fullywater resistant while using thespeaker/ microphone.Speaker/ microphonelocking bracketSpeaker/microphonejack cover
8GETTING ACQUAINTED (TK-2102/ TK-3102)SpeakerSpeaker/microphonejacksMicrophoneAntennaPTT (Push-To-Talk) switchPress, thenspeak into themicrophone tocall a station.Release toreceive.Monitor keyPress and hold toturn the squelchOFF. You willhear backgroundnoise. Releaseto turn thesquelch back ON.LED indicatorLights red whiletransmitting.Lights green whilereceiving a signal.Flashes red whenthe battery voltageis low whiletransmitting.Power switch/Volume controlTurn clockwise toswitch ON thetransceiver. Toswitch OFF thetransceiver, turncounterclockwiseuntil a clicksounds. Rotateto adjust thevolume level.ChannelswitchToggle thisswitch to selectchannel 1 orchannel 2.Battery pack(KNB-15A)
9TK-2102/ TK-3102 OPERATIONNote: When the battery pack voltage becomes too low, transmission willstop and the LED will blink red. See “Low Battery Warning” on page 12.Switch ON the transceiver by turning the Power switch/ Volume control clockwise.• A beep sounds.Adjust the volume by pressing and holding the Monitor key, then rotating the Power switch/ Volume control.Toggle the Channel switch to select your desired channel.• When you receive an appropriate signal, you will hear audio from the speaker.To make a call, press and hold the PTT switch, then speak into the microphone using your normal speaking voice.• Hold the microphone approximately 1.5 inches (3 to 4 cm) from your lips.Release the PTT switch to receive.121212
10GETTING ACQUAINTED (TK-2107/ TK-3107)SpeakerSpeaker/microphonejacksMicrophoneAntennaPTT (Push-To-Talk) switchPress, thenspeak into themicrophone tocall a station.Release toreceive.Monitor keyPress and hold toturn the squelchOFF. You willhear backgroundnoise. Releaseto turn thesquelch back ON.LED indicatorLights red whiletransmitting.Lights green whilereceiving a signal.Flashes red whenthe battery voltageis low whiletransmitting.Power switch/Volume controlTurn clockwise toswitch ON thetransceiver. Toswitch OFF thetransceiver, turncounterclockwiseuntil a clicksounds. Rotateto adjust thevolume level.ChannelselectorRotate to selectchannels 1 ~ 16.Battery pack(KNB-15A)
11TK-2107/ TK-3107 OPERATIONNote: When the battery pack voltage becomes too low, transmission willstop and the LED will blink red. See “Low Battery Warning” on page 12.Switch ON the transceiver by turning the Power switch/ Volume control clockwise.• A beep sounds.Adjust the volume by pressing and holding the Monitor key, then rotating the Power switch/ Volume control.Rotate the Channel selector to select your desired channel.• When you receive an appropriate signal, you will hear audio from the speaker.To make a call, press and hold the PTT switch, then speak into the microphone using your normal speaking voice.• Hold the microphone approximately 1.5 inches (3 to 4 cm) from your lips.Release the PTT switch to receive.135791113161357911131613579111316
12AUXILIARY FUNCTIONS■Time-out TimerThe purpose of the Time-out Timer is to prevent anysingle person from using a channel for an extendedperiod of time.If you continuously transmit for 10 minutes, thetransceiver will stop transmitting and a tone willsound. To stop the tone, release the PTT switch.You can press the PTT switch again to resumetransmitting.■Battery SaveThe Battery Save function decreases the amount ofpower used when a signal is not being received andno operations are being performed (no keys arebeing pressed, and no switches are being turned).While the channel is not busy and no operation isperformed for 10 seconds, Battery Save turns ON.When a signal is received or an operation isperformed, Battery Save turns OFF.■Low Battery WarningLow Battery Warning alerts you when the batteryneeds to be recharged.While transmitting, if the battery power goes below apre-determined value, the LED will blink red. Whena tone sounds, the transceiver stops transmitting.Replace or recharge the battery pack.
13■MonitorWhen no signals are present, the squelch on thetransceiver automatically mutes the speaker so youwill not hear background noise. To manuallydeactivate the squelch, press and hold the Monitorkey. This is useful when you want to adjust thevolume level, or when you need to hear a weaksignal.• The LED indicator lights green while the Monitor keyis pressed.■Quiet Talk (QT) and Digital Quiet Talk (DQT)Some channels may have pre-programmed QT/DQTtones. A QT/DQT tone is a subaudible tone whichallows you to ignore (not hear) calls from otherparties who are using the same channel.When you receive a signal that has a tone differentfrom the one set up in your transceiver, you will nothear the signal. Likewise, signals that you transmitwill only be heard by parties whose QT/DQT tonematches the tone set up in your transceiver.Note: Although using channels set up with QT/DQT tones relievesyou from listening to unwanted calls, it does not mean your calls willbe private.
14OPTIONAL ACCESSORIESYou can use the following accessories with yourtransceiver:• KNB-14: Standard Battery (7.2 V/ 600 mAh)• KNB-15A: Long Life Battery (7.2 V/ 1100 mAh)• KSC-15: Regular Battery Charger• KSC-16: Rapid Battery Charger• KSC-21R: Refreshable Rapid Battery Charger• KHS-1: Head Set with VOX (Voice OperatedTransmit)• KMC-17: Speaker/ Microphone (Standard Duty)• KMC-21: Speaker/ Microphone (Light Duty)• KBP-1: Alkaline Battery Case• KBH-8: Spring-action Belt Clip• KWR-1: Water Resistant Bag
15TROUBLESHOOTING GUIDEmelborP noituloS.rewopoNebyamkcapyrettabehT• ecalperroegrahceR.daed .kcapyrettabeht tonyamkcapyrettabehT• .yltcerrocdellatsnieb kcapyrettabehtevomeR .niagatillatsnidnaseidrewopyrettaB .gnigrahcretfayltrohssiefilkcapyrettabehT• ehtecalpeR.dehsinif wenahtiwkcapyrettab .enoraehrootklattonnaC ruoynisrebmemrehto .puorggnisuerauoyerusekaM• dnaycneuqerfemaseht rehtoehtsaenotklaTteiuQ .puorgruoynisrebmem yamsrebmempuorgrehtO• erusekaM.yawarafooteb ehtfoegnarnihtiwerauoy .sreviecsnartrehtosediseb(seciovrehtO era)srebmempuorg ehtnotneserp .lennahc.enotklaTteiuQehtegnahC• enotehtegnahcoteruseB ruoynisreviecsnartllano .puorg
16FREQUENCY CHARTlennahC timsnarT ycneuqerF evieceR ycneuqerF TQD/TQ12345678901112131415161Model Name: TK-Serial Number:

Navigation menu