Kenwood USA 413603 UHF FM Portable Transceiver User Manual Revised Manual

Kenwood USA Corporation UHF FM Portable Transceiver Revised Manual

Contents

Revised Manual

Thank YouWe are grateful for your purchase of this Kenwood product and welcome you to the Business Radio Service (BRS).Your Kenwood 2-way Business Radio is called a “transceiver”, meaning “transmitter & receiver”. We believe this easy-to-use transceiver will provide you with dependable and reliable communications. This Kenwood transceiver is a precision device. Treat it with care, and you will enjoy years of reliable operation.Models Covered bY This ManualTK-2300 (K): 4-channel VHF FM TransceiverTK-3300 (K): 4-channel UHF FM TransceiverTK-2300 (K2): 16-channel VHF FM TransceiverTK-3300 (K2): 16-channel UHF FM TransceiverFeaTures• 4 channels (K) or 16 channels (K2) with 27 VHF operating frequencies (TK-2300) or 89 UHF operating frequencies (TK-3300) and 122 tone/ code settings for each channel allowing you to ignore unwanted calls.• Built in voice scrambler gives you complete privacy for your conversations. <For Part 95 user, this feature is disabled by the dealer.>• Hands free operation when using an optional headset.• Voice announcement lets you know which channel you have selected and which settings you have made when reassigning key functions and channel settings.
20KEY ASSIGNMENT MODEThis transceiver allows you to reprogram the Side 1 and Side 2 keys with any of the functions listed in the table below. Explanations on the use of each function are provided under “PROGRAMMABLE FUNCTIONS”, on page 22.Table Number Function Name0None (no function)1Calling Alert2Key Lock3Key Lock with Status Memory4Monitor5Monitor Momentary6Scan7Scan + Temporary Delete (Side 2 key default)8Scrambler *9Squelch Off10 Squelch Off Momentary11 Temporary Delete12 Super Lock (Side 1 key default)13 Low Transmit Power* For Part 95 user, this feature is disabled by the dealer.
23■ ScanScan is useful for monitoring signals on the transceiver channels. When scanning, the transceiver checks for a signal on each channel and only stops if a signal is present.If the QT/DQT matches, the transceiver stops at the channel and opens the squelch so you can listen to the call. If the QT/DQT does not match, the call is ignored and scanning continues.■ Scan + Temporary Delete (Side 2 key default)Press this key to start scanning the transceiver channels. When Scan pauses at an undesired channel, you can remove that channel from the scanning sequence by pressing and holding this key for 3 seconds.■ ScramblerPress this key to activate (a single beep sounds) and deactivate (a double beep sounds) the scrambler function of the selected channel.The Scrambler function allows you to hold a conversation in complete privacy. When the Scrambler function is activated, any other party that is listening to your channel will be unable to understand your conversation.<For Part 95 user, this feature is disabled by the dealer.>■ Squelch OffPress this key to hear background noise. Press the key again to return to normal operation.■ Squelch Off MomentaryPress and hold this key to hear background noise. Release the key to return to normal operation.■ Temporary DeleteWhen Scan pauses at an undesired channel, you can remove that channel from the scanning sequence by pressing and holding this key for 1 second.

Navigation menu