Kenwood USA TKR-820N-2 User Manual 73116

Download:
Mirror Download [FCC.gov]
Document ID	73116
Application ID	NGZWr6wskRjZC9NcXLZPbQ==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.8kB (110048 bits)
Date Submitted	1999-12-02 00:00:00
Date Available	1998-11-06 00:00:00
Creation Date	2001-05-08 12:34:22
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-05-08 12:34:24
Document Title	73116.pdf
Document Author:	VicodinES /CB /TNN

VHF REPEATER/UHF REPEATER
TKR-720/820 ‘KENWOOD
l KENWOOD CORPORATION
INSTRUCTION MANUAL FCC ID: ALHTKR-szoN-z
2.963 d 8 MANA
lined £=))£33 U L
QPRNTED IN JAPAN BBZ—GDGS-lDIK. MliMcl
93/121ll099755432! 92/12l0397554
. ,l , , , , , 7 ,,_,.,\7\,
FCCWARNING Carefully unpack the repeater. it is recommended that
This equipment generates or uses radio frequency you identify the items listed and check them an before
energy Changes of modilications to this equipment discarding the packing material. if any damage has
may__ cause harmful interference unless the occurred to the equipment during shipment, file a
modifications are EXPVBSSIY approved In the claimwiththecarrierimmediately.
instruction manual, The user could lose the authority
to operate this equipment ii an unauthorized Equipment
change Of modification I5 made. Repeater .................................. lea.
WARNING f h h d ho susalBAIUoHZOV) ...... FOG-3024415 tea.
To prevent ire or s ock azard, 0 not expose tis Fuse (1 6A) (ior220V) F05-1623-05 tea
39mm ‘0 fa‘” 0’ W'sme- Fuse(10A) (lorTKR-BZOMuIti channel versiononly)
F51-0016-05 1ea.
. BEFURE OPERATION FusellSA) (for TKH-720 Multl channel version only)
F51-0017-05 lea.
IMPORTANT Coax.Cahle(TKR-Bzuonly) E31-3391—05 tea.
GOVERNMENT LAW PROHlBlTs THE OPERATION OF PowercableAss‘y(Multlchannelversiononly)
M N O L. D i -
‘LLEGAL opcimrlou ls PUNISHABLE BY FINE on "pexwmm'mfl 820mm” _ .
JZl 4248 04 2 ea.
MPRISUNMENT UR 30TH. Machine screw (run-820 only)
SEFEH SERVICE TO A QUALIFIED LICENSED on N09—0704—05 wee
,ERTIFIED TECHNICIAN ONLY. Wanamardwls'mmy) 1mm
instruction manual ...... 1 sheet
Please read this instruction manual carefully before
placing your Repeater in service.
SAVE THIS INSTRUCTION MANUAL. . CONTROLS and FUNCTIONS
IARNING From panel Q lMuIti channel version onlv)
o prevent electric shock. lire and other injury,
lease note the followings:
To ensure good ventilation, do not put anything
on top of the cabinet
To avoid risk of electric shock. under no
circumstances should the unit be opened.
an abnormal smell or smoke is detected.
immediatel turn the power oil and pull out the
power pug. Contact the KENWUOD service
station or your dealer.
INSTALLATION ®lMulo channel version only)
ise consult your dealer for installation of the (D POWER switch: Press to turn the unit 0M.
eater and antenna. (2 SPEAKER: Front mounted for best sound quality.
UTION ®POWER indicator: Lights when the unit is turned
not place the unit. where it will be exposed to 0”
act sunli ht or close to heatin a Iiance. ©BU$Y ”Imam“ ON when channel .'5 '” use.
not pla?:e the unit in areag gin excessive dust, high (53W indicator: G!°W5 duringtransmit.
1idity or on unstable surfaces. 6) TAKE OVER swuch and indicator:
"E I (with dealer optional remote controller)
following] installation instructions are for use by Press this switch when you will take over control
r KENWO D service lacility only. from the remotecontroller. it so equipped.
* ‘ “ ‘ ‘ ‘ ‘ ‘ f ‘ * ®VOL control: Turn to about the 12 o’clock position.
OSQL (Squelch) control: Squelch ls activated when the
control is rotated clockwise. Further rotation sets
threshold level. This control does not determine
reneater trinnm Ian/ml
tEPEAT switch and indicator: Press this switch for
epeater operation and the Indicator light. Leave
out the switch for full duplex transceiver operation.
MON] (monitor) switch and indicator:
Deteats signaling decoder in the tull duplex
transceiver mode. allowing the operator to check
[or tralfic on the channel betore transmitting. The
indicator lights when the MOM) switch is pressed.
Microphone Input Receptacle
CHANNEL indicator (Multi channel version only)
Lights when the radio is turned ON, and indicates
ooeraring channel number,
ZHANNEL selector tMulti channel version only)
Roatary control knob for channel selection
(D @ilviuiri channel Vsrsron only)
i Accessory connector
i TX antenna connector
lRX/Duplexer antenna connector
iDC input connector (Multi channel version only)
a;
[Fl-820
@tMuIrl channel version only)
) Accessory connector
DTX/Duplexer antenna connector
D RX antenna connector
DDS input connector (Multi channel version only)
I REPEATEH OPERATION
witch on the unit by pressing the POWER switch.
ress the REPEAT swttch to turn the indicator ON. The
nit transmits and transfers message from stations in
our own system automatically
he TX light will light during transmission. You will be
his to hear messages being transferred by turning the
’0L control clockwise, it necessary.
I TRANSCEIVER 0PEHAT|0N
iECEIVE
Switch the unit ON by pressing the POWER switch ON.
text. leave out the REPEAT switch to turn the REPEAT
nninator OFF. and adlust the volume and squelch
More '
If your radio is programmed with 0T or DOT
Signaling, there will be virtually no noise coming
lrom the speaker, even at tull volume setting. You
will hear transmissions being made by other radios IN
YOUR SYSTEM ONLY!
It your radio is NOT PROGRAMMED with 0T or DOT,
you will hear ALL TRANSMISSIONs being made by
any stations using the channel, or it no one is using
the channel, the radio will remain quiet.
To adjust the volume, depress the MONI switch, which
defeats the QT system (if so programmed), and allows
you to hear all activity on the channel. Set the volume
control for a comfortable listening level, and again
depress the MUNI switch. allowing it to return to the
OFF position for normal operation.
With the MOM) switch in the OFF position, QT system
programmed radios will ignore transmissions from
stations other than those in your system.
Radios not programmed with (IT will receive all
transmissions occurring on the channel. even those
trom stations outside your own system.
At the first reception of a message trom your
dispatcher or another vehicle in your tleet, you may
wish to make a minor adjustment at your volume
control.
TRANSMIT
Calling another
verysimple‘,
First, listen tor a few seconds to make certain the
channel is not being used, The monitor switch may be
depressed to check for activity on the channel.
Squeeze the TRANSMIT switch and speak in your
normal speaking voice. FCC regulations require that
you identity the station you are calling, and your
station.
The TX light will light during transmission. When you
are through speaking, release the TRANSMIT switch,
and you are automatically back in the receive mode.
station on your KENWOOD radio is
I MICROPHONE
Plug the KENWOOD KMC-9 optional Microphone into
the Microphone Input Receptacle on the iron! panel
LOCK switch
Momma switch
TRANSMIT switch

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:05:08 12:34:22
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : VicodinES /CB /TNN
Title                           : 73116.pdf
Modify Date                     : 2001:05:08 12:34:24-04:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools