Kenwood Fleetsync Tk 5710H Users Manual

TK-5710(H) to the manual 01ed5e9c-aa55-41e3-b7bd-da969e48660e

2015-01-23

: Kenwood Kenwood-Fleetsync-Tk-5710H-Users-Manual-264420 kenwood-fleetsync-tk-5710h-users-manual-264420 kenwood pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

TK-5710(H)/5810(H)
VHF/UHF FM & Project 25 Digital Mobile Radio
FRONT PANELS/CONTROL HEADS
Backlit Dot Matrix LCD
3-Digit Sub-Display
Function / Status LCD Icons
Transmit LED
Busy/Call Alert/Warn LED
LCD Brightness Control
Power On/Off Switch
Rotary Volume Knob
Rotary Selector Knob
Backlit Keys
PF Key Label Inserts
Microphone Jack
MIL-STD 810 512.X Driven Rain
KCH-14 Front Panel
12-Character Alphanumeric Aliases
5 PF Keys
UP/DOWN Keys
Built-in Front Speaker
KCH-15 Front Panel
14-Character Alphanumeric Aliases
11 PF Keys
UP/DOWN Keys
External Speaker Required
SCAN TYPES (FM & P25)
Single Zone/Multi-Zone Scan11
Scan Lists
Conventional Scan
Limited Talk Group Scan6
Priority Monitor Scan6
Dual Priority Scan
FM
QT / DQT
Operator Selectable Tone
Two-Tone Decode / Encode7
DTMF Encode / Decode / Stun8
Special Alert Tone Patterns9
Horn Alert Output
Encryption / ANI Board Control
Companded Audio
FleetSync® (FM)
FleetSync®or FleetSync®II10
PTT ID Digital ANI
Caller ID Display
Status Messaging
Emergency & Stun Statuses
Selective & Group Call
Text Messaging
P25 DIGITAL
P25 Digital Conventional
P25 Digital Trunking Option
IMBETM VOCODER
Talk Group ID Lists
Individual ID Lists
Caller ID Display
RSSI Indicator
Remote Monitor
Remote Check
Radio Inhibit
Encryption Key Delete
Encryption Key Zeroize (SCM required)11
Encryption Key Retention (SCM required)11
DES 16-Key SCM Option11
AES FIPS 140-2 & DES 16-Key SCM Option11
KPG-94 KVL Key Loader Interface Cable12
GENERAL FEATURES
50W & 110W (136-174 MHz)
45W & 100 W (450-520, 400-470 MHz)
50 Zones / 512 Channels
Personality Lists
Enhanced Kenwood Audio
Zone/CH Voice Announce
Emergency Features
Tactical Group
Intercom1
Public Address
Time Out Timer
Busy Channel Lockout
Ignition Sense2
Timed Power Off
DB-25 & 9-Pin Accessory Connectors3
Transceiver Password
Date & 12/24 Hour Time Clock
Windows®Programming & Tuning4
Windows®Firmware Uploading4
Field-Programming & Tuning
Cloning
Easy Option Ports (26-pin)5
DB-25 & 9-Pin Accessory Connectors
MIL-STD 810 C/D/E/F, IP-54
MIL-STD Noise-Cancel Mic (included)
MIL-STD 12-Key DTMF Mic Option
MOUNTING CONFIGURATIONS
Dash Mount
Single Control Head Remote Mount
Dual Control Head Remote Mount
KMC-9B
Desktop Microphone
KMC-27
Microphone
(MIL-SPEC noise-canceling)
KMC-28
Keypad Microphone
(MIL-SPEC noise-canceling)
KCT-18
Ignition Sense Cable
KCT-22
Remote Control Cable
KCT-23
DC Power Cable
KES-5
External Speaker (20W)
KCH-14
Basic Remote
Control Head
KCH-15
Full-Featured Remote
Control Head
KRK-5
Single Control Head Remote Kit
KRK-6DH
Dual Control Head Remote Kit
KPG-94
Keyloader Interface Cable
VGS-1
Voice Guide & Storage Unit
Applicable MIL-STD & IP
ADS#43807 Printed in USA
JQA-QMA1205
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete
list of all accessories and options.
Options Specifications
Model TK-5710 TK-5710H TK-5810 TK-5810H
GENERAL
Frequency Range
Type 1
136-174 MHz 450-520 MHz
Type 2
400-470 MHz
Number of Channels 512
Zones 50
Max. Channels per Zone
250
Channel Spacing
Analog 12.5 / 15 / 20 / 25 / 30 kHz 12.5 / 25 kHz
Digital 12.5 kHz
Operating Voltage 13.6V DC ± 15% 13.4V DC ± 15% 13.6V DC ± 15% 13.4V DC ± 15%
Current Drain
Standby Less than 0.6A
Receive Less than 2.3A
Transmit Less than 12A Less than 25A Less than 14A Less than 28A
Duty Cycle Transmit: 20%
Operating Temperature Range -22 ˚F to +140 ˚F (-30 ˚C to +60 ºC)
Frequency Stability ± 2.0 ppm (-22 ˚F to +140 ˚F)
Antenna Impedance
50
Dimensions (W x H x D)
RF Deck only 7.01 x 2.36 x 7.68 in. 7.01 x 2.36 x 12.87 in. 7.01 x 2.36 x 7.68 in. 7.01 x 2.36 x 12.87 in.
(178 x 60 x 195 mm) (178 x 60 x 327 mm) (178 x 60 x 195 mm) (178 x 60 x 327 mm)
with KCH-14 or15 7.05 x 2.36 x 9.09 in. 7.05 x 2.36 x 14.29 in. 7.05 x 2.36 x 9.09 in. 7.05 x 2.36 x 14.29 in.
(179 x 60 x 231 mm) (179 x 60 x 363 mm) (179 x 60 x 231 mm) (179 x 60 x 363 mm)
Weight RF Deck only 5.3 lbs. (2.4 kg) 8.6 lbs. (3.9 kg) 5.5 lbs. (2.5 kg) 9.2 lbs. (4.2 kg)
with KCH-14 5.9 lbs. (2.7 kg) 9.2 lbs. (4.2 kg) 6.2 lbs. (2.8 kg) 9.9 lbs. (4.5 kg)
with KCH-15 5.9 lbs. (2.7 kg) 9.2 lbs. (4.2 kg) 6.2 lbs. (2.8 kg) 9.9 lbs. (4.5 kg)
FCC ID
Type 1
K4435753110 K4435753210 K4439923110 K4439923210
Type 2
K4439923120 K4439923220
IC Certification
Type 1
282F-35753110
Type 2
282F-39923120
RECEIVER (Measurements made per EIA/TIA-204-D)
Sensitivity
Digital (5% BER) 0.25 µV
Digital (1% BER) 0.40 µV
Analog 12 dB SINAD 0.25 µV
Selectivity
Digital -63 dB
Analog @ 25/30 kHz -83 dB / -85 dB -83 dB / -
Analog @12.5/15 kHz -76 dB / -80 dB -76 dB / -
Intermodulation Distortion (Digital & Analog)
-80 dB
Spurious Response (Digital & Analog)
-90 dB
Audio Distortion
Digital Less than 1.0%
Analog Less than 2.0%
Audio Output
Internal (KCH-14) @3% 1.5 W at 8
@5% 1.625 W at 8
External @3% 12 W at 4
@5% 13 W at 4
TRANSMITTER (Measurements made per EIA/TIA-152-C)
RF Output Power
50 W to 5 W 110 W to 50 W 45 W to 5 W 100 W to 50 W *2
Spurious & Harmonics 80 dB
FM Hum & Noise
Analog @ 25 kHz 50 (53) *1 dB 50 dB
Analog @12.5 kHz 45 (47) *1 dB 45 dB
Microphone Impedance 600
Audio Distortion Less than 2%
Modulation 16K0F3E, 11K0F3E, 8K10F1E, 8K10F1D
20K0F7D, 11K2F7D, 14K4F1D, 7K20F1D
8ft./17ft./25ft.
footnotes from Front:
1Intercom: Dual Head capable remote mounts only.
2KCT-18 ignition sense cable option required.
3DB-25 ACC: I/O's for dispatch consoles, desktop remotes, vehicle
intercom/PA units, motorcycle PTT/headset kits, PC Laptop /Data
Modems, GPS/AVL Modems; DB-25 (9 Prog. AUX I/O's & 2 Prog.
AUX Outputs); 1 Prog Input (on Control Head).
4KPG-95D Software required (Windows 98/ NT/ 2000/ Me/XP
compatible).
5Easy Option Ports: VGS-1, ANI & Scrambler board ports; only 2
ports can be used simultaneously.
6P25 Trunking option required.
7Two-Tone: Decode (4 sets x 4 pairs each); Encode: 32 pairs;
Operator Selectable Tone (40 QT.DQT code pairs).
8DTMF Encode: PTT ID, Emergency ANI, Manual Encode (KMC-28),
Auto-Dial (9 numbers); DTMF Decode: Primary/secondary ID, Stun
(a.k.a. dead beat disable).
9Operates for 2-Tone, DTMF, FleetSync selective calling.
10 FleetSync & FleetSync II are not compatible.
11 Feature/Option added to the TK-5710 Version 2 radios (SN
80600001 or later).
12 KPG-94 adapts the Motorola‚ KVL3000/3000 Plus Key Loader to
the TK-5710/5810.
(*1) 148MHz ~ 168MHz
(*2) Type 1: 100W to 50W for 450-500MHz. More than 60W to 50W
for 500-520MHz.
Type 2: 100W to 50W for 400-470MHz.
Analog measurements made per TIA/EIA 603
Digital measurements made per TIA/EIA 102CAAA
FleetSync® is a registered trademark of Kenwood Corporation.
Windows® is a registered trademark of Microsoft Corporation in the United States
and other countries.
IMBETM is a trademark of Digital Voice Systems Inc.
The P25 Logo is used under license and is a registered trademark of the Project 25
Technology Interest Group.
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II Cat.A1 501.3/Procedure I, II Cat.A1 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II Cat.C1 502.3/Procedure I, II Cat.C1 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I Cat.A1,C1 503.3/Procedure I Cat.A1,C1 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I,II 506.3/Procedure I, II 506.4/Procedure I, III
Humidity 507.1/Procedure II 507.2/Procedure II 507.3/Procedure II 507.4
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I, II 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I Cat.8,II Cat.3 514.4/Procedure I Cat.8,II Cat.3 514.5/Procedure I Cat.20,II Cat.5
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V, VI 516.4/Procedure I, IV, V, VI 516.5/Procedure I, IV, V, VI
International Protection Standard
Dust & Water Protection IP54

Navigation menu