Kenwood Kdc Bt645U Users Manual
KDC-HD545U to the manual cd156660-ed30-411d-bcd4-501647d5d76e
2015-01-23
: Kenwood Kenwood-Kdc-Bt645U-Users-Manual-262833 kenwood-kdc-bt645u-users-manual-262833 kenwood pdf
Open the PDF directly: View PDF 
.
Page Count: 128
KDC-BT645U
KDC-HD545U
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-BT645U/ KDC-HD545U Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© B64-4534-00/00 (KW/K0)
Contents
Before Use
3
Component names and functions
4
General operation
5
Before Using
Common Operation
Function Setting Operation
Music Disc/Audio File/iPod Operation
6
Basic Operation
Play function
All Random
Music Search
Music Search for iPod
Alphabet Search
My Playlist for iPod
Audio File/ iPod Setting
iPod Control by Hand Mode
Direct Music Search
Basic Operation of Disc Changer (Optional Accessory)
Direct Disc Search
Tuner Operation
Connecting a Bluetooth Device
Making a Call
Calling a Number in the Phone Book
Calling a Number in the Call Log
Dial a Number
Make a Voice Dialing Call
Registering to the Preset Dial Number (Preset Memory)
Speed Dialing (Preset Dial)
Receiving a Call
During a Call
Call Waiting
Other Functions
Display of Phone Number Type (Category)
2 |
Display Settings
18
Display Selection
Text Scroll
Display Setting
Auxiliary Input Display Setting
Other Functions
20
Bluetooth Setup
10
12
14
22
Bluetooth Setup
Registering Bluetooth Device (Pairing)
Deleting a Registered Bluetooth Device
Registering PIN Code
Displaying the Firmware Version
Downloading the Phone Book
Selecting the Bluetooth Device You Wish to Connect
Downloading the SMS
SMS (Short Message Service)
Adding a Voice Dialing Command
Setting a Voice Command for Category
Satellite Radio Tuner Control
(Optional Accessory)
Basic Operation
Station Preset Memory
HD RadioTM Setting
Direct Access Tuning
iTunes Tagging
Operation of Hands-Free Phoning
17
Audio Control
Clock Adjustment
Demonstration Mode Setting
Initial Setting
Removing the Faceplate
How to Reset Your Unit
Muting Volume Upon Reception of Phone Call
Basic Operation
Station Preset Memory
Tuner Setting
Direct Access Tuning
HD RadioTM Tuner Operation
Audio Adjustments
28
Basic Operation
Preset Memory
Satellite Radio Setting
Category and Channel Search
Channel Scan
Direct Access Tuning
Basic Operations of Remote Control
30
Appendix
32
Accessories/ Installation Procedure
35
Connecting Wires to Terminals
36
Installation/Removing the Unit
37
Troubleshooting Guide
38
Specifications
42
KDC-BT645U/ KDC-HD545U
Before Use
2WARNING
To prevent injury or fire, take the following
precautions:
To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel
the Demonstration mode. Refer to (page 5).
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
¤
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth or
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
About the Terminals of the Unit and
Faceplate
• To prevent deterioration, do not touch the terminals of the
unit and faceplate with your fingers.
• If the terminals on the unit or faceplate get dirty, wipe them
with a clean soft dry cloth.
Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
• The characters which can be displayed by this unit
are A-Z 0-9 @ “ ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } |
~.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Handling CDs
• Do not touch the recording surface of the CD.
• Do not stick tape etc. on the CD, or use a CD with
tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing CDs from this unit, pull them out
horizontally.
• If the CD center hole or outside rim has burrs,
use the CD only after removing the burrs with a
ballpoint pen etc.
CDs that cannot be used
• CDs that are not round cannot be used.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condensation on the lens may not allow CDs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
• CDs with coloring on the recording surface or CDs
that are dirty cannot be used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which do not
have the mark.
• You cannot play a CD-R or CD-RW that has not
been finalized. (For the finalization process refer to
your CD-R/CD-RW writing software, and your CD-R/
CD-RW recorder instruction manual.)
• 3 inch CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
English |
3
Component names and functions
1
15 14
2
13 12
3
11
10
4
9
5
8
7
6
1 Release button
The faceplate of the unit can be detached and
taken with you, helping to deter theft. Refer to
(page 21).
9 [DISP] button (KDC-HD545U)
To change display item.
To change text scroll. (press the button at least 1
second)
2 [SRC] button
To turn on this unit and select the Source.
To turn off this unit (press the button at least 1
second).
p [4] / [¢] button
To select a station, song and setting items.
3 Disc slot
When inserted a disc (label side up), the source is
switched automatically and a song starts playing.
4 Display window
5 [0] button
To eject the disc.
To select the remove mode, and remove the USB
device or an iPod (press the button at least 2
seconds or more).
6 USB Terminal
When connecting, open up the USB terminal lid. A
USB device or an iPod can be connected.
7 Auxiliary Input Terminal
Portable audio device can be connected with the
mini-plug (3.5 mm ø).
• Use the mini-plug cable which is stereo type and does
not have any resistance.
8 [1] – [6] button
To recall the memorized station.
Switches the play mode between music discs,
audio files, and iPod.
q Microphone (KDC-BT645U)
The microphone for the hands free phone is built
in. When your voice cannot be recognized due
to the low microphone volume, noises or echo
in the vehicle. Adjust the microphone settings
by “MIC GAIN”, “NR LEVEL” and “EC LEVEL” of
(page 22).
w [VOL] knob
To adjust volume.
Enters function setting mode and setting item
(turn and press the knob). Refer to (page 5) for details.
e [BAND] button
To select the receiving band, the folder for audio
file.
] button
r [
To return to previous item.
t [ ] button
To enter the music search mode.
To enter the iTunes Tagging mode.
To enter the dialing mode.
9 [VOICE] button (KDC-BT645U)
To make a voice dialing call.
To change text scroll. (press the button at least 1
second)
4 |
KDC-BT645U/ KDC-HD545U
General operation
Before Using
Exit of the Demonstration Mode
Turn off the demonstration mode when you use it
for the first time after installation.
1 Press the [VOL] knob to quit the demonstration
mode when the messages “CANCEL DEMO” and
“PRESS”, “VOLUME KNOB” are displayed (approx.
15 seconds).
2 Turn the [VOL] knob to select “YES” and press the
[VOL] knob.
⁄
• The demonstration can be set or cancel using
(page 20).
Function Setting Operation
The basic operating procedure for using this
function is described below. The individual function
items are covered in the operating procedures.
1 Select the source
Press the [SRC] button.
Function items vary from source to source. For a list
of the function items. Refer to
(Page 34).
2 Enter Function Setting mode
KDC-BT645U: Press the [VOL] knob for at least
1 second.
KDC-HD545U: Press the [VOL] knob.
”FUNCTION” is displayed.
3 Select your desired function item
• When connection of the iPod is recognized, the source
display changes from “USB” to “iPod”.
• The source “CD” and “iPod” can be selected when each
source is ready to play.
• When an optional accessory is connected, the source
name for each device appears.
Volume
Turning the [VOL] knob adjusts the sound
volume.
Press the [
item.
Example:
] button to return to the previous
AUDIO CONTROL
SUBWOOFER SET
DETAILED SET
LPF SUBWOOFER
[VOL]
[VOL]
…
⁄
⁄
…
Power and source select
Turns the power ON by pressing the [SRC]
button.
Pressing [SRC] button each time switches
between sources.
Tuner (“TUNER” or “HD RADIO”) ➜ USB or iPod
(“USB” or “iPod”) ➜ CD (“CD”) ➜ Auxiliary input
(“AUX”) ➜ Standby (“STANDBY”)
Keeping pressing the [SRC] button at least 1
second turns the power OFF.
Turn the [VOL] knob and press it when the
desired item is displayed.
Repeat the operation until your desired function
item is selected.
………
Common Operation
DISP SELECT
SETTINGS
In this manual, the above selection is indicated as
Select “AUDIO CONTROL” > “DETAILED SET” >
“LPF SUBWOOFER”.
4 Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
5 Exit Function Setting mode
Press the [
] button for at least 1 second.
English |
5
Music Disc/Audio File/iPod Operation
[SRC] [VOL]
Disc slot
[]
CA-U1EX
• CA-U1EX (optional accessory) is
required to connect a USB device.
• KCA-iP101 (optional accessory) is
required to connect an iPod.
[ ] [ ] [BAND]
[] / [E]
[1] — [6] USB Terminal
Basic Operation
Play function
Playing Disc
Insert a disc into the disc slot (label side up).
When inserted, the source is switched
automatically and a song starts playing.
When a disc is inserted, the “IN” indicator lights up.
Scan play
Press the [2] button.
Successively plays the intro of the music in the disc
or folder.
When Scan Play is turned on, “TRACK SCAN”/ “FILE
SCAN” is displayed.
Pressing this button again plays songs in the
normal mode starting with the song being played
now.
Playing USB device or iPod
Connect a USB device or iPod to the USB terminal.
When connected, the source is switched
automatically and a song starts playing.
Pause and play
Press the [6] button to pause or resume
playback (track or file).
Folder select
Press the [BAND] button switches a folder.
The iPod can be operated only when a category
has been selected in the search mode.
Song select
Press the [4] or [¢] button selects a song
(track or file).
Fast reverses or forwards the music while
pressing the [4] or [¢] button.
(No sound is output while playing audio file.)
Ejecting Disc
Press the [0] button ejects a disc.
You can eject the disc for 10 minutes after
switching off the engine.
⁄
• The Scan play operation cannot be performed while
iPod is playing.
Random play
Press the [3] button.
Randomly plays the music in the disc or folder.
When Random Play is turned on, “DISC RANDOM”/
“FOLDER RANDOM” is displayed.
Press this button again cancels the Random play.
Repeat play
Press the [4] button.
Switches between Track Repeat (“TRACK REPEAT”)
and OFF (“REPEAT OFF”) when pressed while
playing a CD.
Switches between File Repeat (“FILE REPEAT”),
Folder Repeat (“FOLDER REPEAT”), and OFF
(“REPEAT OFF”) when pressed while playing an
audio file.
Removing USB device or iPod
Press the [0] button for at least 2 seconds can
be entered to the USB Remove mode (“USB
REMOVE” is displayed) and the USB device, iPod
can be removed safely.
Selecting CD, USB or iPod source
Press the [SRC] button.
Select the “CD”/“USB” or “iPod” display.
6 |
KDC-BT645U/ KDC-HD545U
Function of iPod
Cancelling the Music Search mode
Press the [
] button for at least 1 second.
All Random
All songs in iPod are played at random.
Press the [3] button for at least 1 second.
Pressing the button toggles the setting between
All random play on (“ALL RANDOM”) and off
(“RANDOM OFF”). Press this button again cancels
the Random play.
⁄
• The time required to turn on the all random function
may become longer depending on the number of songs
in iPod.
• Turning on the all random function changes the iPod
browse item to “SONGS”. This browse item will not be
changed even if the all random function is turned off.
• If the browse item is changed to search for music while
the all random function is on, the all random function is
turned off and the songs in the browse item are played
at random.
⁄
• Skip Search: The number of songs to be skipped is
determined by the ratio of the total number of songs in
the list which is selected. Set the ratio with “SKIP SEARCH”
of
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : Yes
Encryption : Standard V4.4 (128-bit)
User Access : Print, Extract, Print high-res
Create Date : 2009:11:11 11:22:57+09:00
Modify Date : 2009:11:17 08:51:08+09:00
XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool : InDesign: pictwpstops filter 1.0
Metadata Date : 2009:11:17 08:51:08+09:00
Format : application/pdf
Title :
Creator :
Producer : Acrobat Distiller 9.0.0 (Macintosh)
Document ID : uuid:87fb069d-dbd6-4000-b915-343fef230ca0
Instance ID : uuid:af96754c-7a9b-49d7-a9b1-7c4bf0bd5b2c
Page Count : 128
EXIF Metadata provided by EXIF.tools