Kenwood Marine Radio Ts 570Dg Users Manual

TS-570D(G) to the manual 2bce0630-6bdf-4c26-a91d-935719d09876

: Kenwood Kenwood-Kenwood-Marine-Radio-Ts-570Dg-Users-Manual-263922 kenwood-kenwood-marine-radio-ts-570dg-users-manual-263922 kenwood pdf

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

TS-570D(G) TS-570S (G)
HF Transceiver

HF+6m Transceiver

Advanced Digital Technology for Everyone

K

enwood has brought the best of HF
DSP technology out of the clouds and into the hands of everyone with the new
TS-570D(G) and TS-570S(G) (HF+6m). The G series represents the latest
advancements in HF radio design from Kenwood, and is even available as an
upgrade to pre-existing TS-570 units.

2

EASY OPERATION

Ke nwood’s T S -570D/S (G) with
Adv anced Technolog y Upgr ade
16-bit AF-stage DSP delivers superb audio quality on both transmit and receive
Adjustable transmit sound quality and NR1 Noise Reduction System
Digital filtering with 3 new CW DSP filters give you the edge when conditions are tough
Compact enough for mobiling, yet large enough to build a station around
Compatible with the Kenwood Sky Command System, offering the convenience of
handheld remote control.

High-end radio technology doesn’t mean
a high-end budget anymore — Kenwood
delivers it today with the all-new TS-570D(G)
and TS-570S(G) (HF+6m). With 16-bit DSP
technology, untouchable digital filtering,
heavy-duty transmitter design, a Central
Frequency Control System for near-perfect
stability, and a large LCD display section
coupled with an ergonomically-optimized
human interface, the TS-570D/S(G) provides
a clean and powerful operating experience.
All of this wrapped up in a compact and
efficient package makes the TS-570D/S(G)
the perfect choice for home or mobiling in
your car, RV or boat.

AF-stage Digital Signal Processing
Interference Reduction
AF-stage digital signal processing provides
extensive control over received signals by
identifying and filtering interference using
digital algorithms. This results in interference
reduction capabilities simply not attainable
with analog designs. In addition, the new
NR1 system is operator-adjustable in 9-step
increments, or it can be assigned to track
input signal strength automatically. Both the
NR1 and NR2 settings now track when
changing mode groups
(eg. SSB/AM/FM to
CW/FSK). The new
Dual Selectable Beat

Cancel (BC) function also works against intermittent beat interference (except in CW mode).
In SSB/AM/FM modes you can select a
Hi/Low cut DSP slope tune using up to 441
possible combinations. In CW and FSK, the
DSP acts as a VBT (Variable Band Tuning) that
alters passband width, for rejection of nearby
signals. The super-narrow CW filter (50 Hz)
enables effective filtering even during very
crowded conditions, with its center frequency
tied to the pitch frequency so they track
together. The G model also incorporates 3 new
CW DSP filters: 80 Hz, 150 Hz, 500 Hz, for a
total of 11 user-selectable filters. You can now
also use the “One-touch” DSP filter wide mode
to instantly check band conditions when operating in narrow mode.
When used in conjunction with the equalizer, the
CW filter reduces ringing to
almost undetectable levels.
There are also 3 optional filters that can be easily installed (one at a time)
to acquire various IF filter bandwidth selections
(see optional accessories). The DSP also provides 2 types of noise reduction — the Line
Enhancer Method (NR1) for SSB/AM and the

SIGNAL

SPAC (Speech Processing by Auto Correlation)
Method (NR2) for CW. The Line Enhancer
Method automatically forms a filter shape around
CANCELED
the target signal for
a custom, dynamic
BEAT
BEAT
BEAT
noise reduction capability. In conditions
where weak CW
TARGET SIGNAL
signals are buried deep
in the noise, the SPAC Method has the ability
to pull them out with either the 20 milli-second
or 7.5 milli-second correlation time settings.
In addition, the DSP Beat Cancel function
suppresses multiple beats on SSB, FM and AM
immediately upon detection, great for 40-meter
broadcast station carriers.

On 6m too!
√ DSP
√ 100 watts
√ Preset Auto
Antenna Tuner
3
TS-570S(G) HF+6m Transceiver (Accessories sold separately.)

Operator -Oriented Engineering Provides You
with the Highest Levels of Performance.
TX Audio Shaping
You have 3 ways of tailoring your transmit
audio with DSP: Voice Equalizer, Transmit
Equalizer and Speech Processor functions, plus
you can use the new 9-step TX sound quality
monitor volume for precision control. On SSB
and AM you can choose between 2 types of
Voice Equalizer transmit frequency response settings according to your microphone and operating requirements. The Transmit Equalizer offers
4 frequency response settings on SSB, FM and
AM: high boost for improved clarity, bass boost
for stronger sound, formant pass to minimize
extraneous sounds, and conventional mode for
an ‘analog’ sound. The Speech Processor works
across three bands (SSB, FM and AM) for high
compression and minimal distortion. By combining the Speech Processor gain settings with
the Transmit Equalizer, you are able to shape
your voice for virtually any application, plus it is
now available for RX as well, complete with its
own independent settings.

provide a positive tactile
feedback, frequencies
can be directly entered
on the 10-key pad, and radio controls can be
customized by assigning specific menus, features,
or panel switches to the Programmable Function
(PF) key. And of course, Kenwood’s Fine mode
allows 1 Hz steps on the VFO dial for precise
manual tuning.
Extensive Memory Functions
You have a bank of 100 memories
available, with 90 assignable for
standard memories and
10 for programmable
VFO,

CW Auto Tune — a World first
Now you no longer have to adjust the VFO
while operating on CW — the CW
Auto Tune function does it for
you automatically by adjusting
the VFO to your preset pitch at
the touch of a button. In the
new G
models
the CW
auto tune mode
links only with the
RIT frequency
without changing the
transmit frequency so
incoming traffic can be tracked even if
it is slightly off frequency.

New Menu and User Features
There are 46 types of menu features to assist
both the novice and expert operator. The Online Guide feature provides information on a
scrolling sub-display so you won’t need to refer
to the manual, the click encoder and entry keys

4

Large LCD
The amber-colored backlight LCD frequency
display is large, with a 4-stage dimmer, and is
laid out in a clear and informative manner. The
7-digit alphanumeric sub-display provides menu

mode guidance, split frequency display and
digital filter selection options. The accompanying analog meter provides S-readings, PWR,
COMP, SWR and ALC information.
Optimal Sizing
The 10-5/8 X 3-3/4 inch panel size make
the TS-570D/S(G) suitable for any
mobile operation, yet its large
display and sophisticated user
features make it a perfect candidate
to build a first-class base station
with. This versatility means that
you only need one radio for
all your home and field
operations.

High Performance
Transmitter Section

Operator-Engineered Features
The TS-570D/S(G) represents the latest
advancements in the human-machine interface
as applied to radio transceiver design. Kenwood
engineers have achieved a fine balance between
size, features, display, controls and performance
to deliver a transceiver that will give you outstanding results regardless of your operating
style or location.

Scanning
The TS-570D/S(G) has a wealth of scanning
capabilities including variable speed with timebased or carrier-based resume modes, channel
scan, group channel scan, all except locked out
channels, or it can be programmed to scan a frequency range between two channels. The scanhold function stops the scanning for 5 seconds.

programmable
scan and longterm memory
functions. The scroll function lets you browse
memory contents, memory channel copy sends
the contents of one channel to another, lock-out
memory changes the scan map to exclude certain
channels, and memory shift alters the frequency
stored in a channel. In addition, there are 5
‘quick’ memories to capture a current operation
‘on-the-fly’, available in SSB, CW, FM, AM and
FSK modes — ideal for contest operation.

The heavy-duty transmitter makes the
TS-570D/S(G) ideal for contesting, mobiling
and FSK applications, delivering between 5 and
100 watts in 5 watt increments. The large
heatsink and high-capacity cooling fan system
designed specifically for this model enables
continuous operation under a wide range of
environmental conditions.
High frequency stability is achieved with a
one-point frequency control system that uses a
single crystal to control all internal oscillating
frequencies (except in FM mode). Stability can
even be raised to a pro-grade +/- 0.5 PPM
(within 7 Hz on the 14 MHz band) with the
optional SO-2 TCXO.

The Feature Packed TS-570D(G)/TS-570S(G) is
the Perfect Choice for Any and All Requirements.
Hot Receiver Section
The wide-band receiver covers from 500 kHz
through 30 MHz continuously with high selectivity and sensitivity. The two built-in pre-amps
7MHz–band RF Band Pass Filter Response
REF -29.3 dBm
5 dB/

ATT 10 dB

CENTER
7.0 MHz
PREVIOUS
MODELS

RBW
3.0 kHz
VBW
1.0 kHz

SWP 10 s

TS-570D/S(G)

SPAN 14.0 MHz

CENTER 7.0 MHz

(one each for high band and low band) allow
you to select better sensitivity or higher IMD
performance, and the dedicated 7 MHz and
14 MHz bandpass filters deliver improved SW
intermodulation rejection.
During split-frequency operations you can
receive your transmit frequency with a touch of
the TF-Set button. The transmit frequency can
be changed, even if the receive frequency is
locked, as long as the button is held.
Other receiver section features include IF
Shift, Noise Blanker to eliminate pulse type
noise, AGC, All-Mode Squelch and RF Gain.

CW Features
In addition to the CW Auto Tune function, the
TS-570D/S(G) has a host of CW features often
found only on larger-class models. The full/semi
break-in switching and delay time settings are
fully adjustable. In semi break-in the delay time
between key release and active receive mode can
be set for between 50 milli-seconds and 1000
milli-seconds. When using VOX operation the
delay time can be set for between 150 milliseconds and 3000 milli-seconds. Other features
include CW side tone monitor and volume
setting, CW reverse mode and a 3 channel
CW message memory.

Built-in Keyer
The full-featured electronic keyer provides solid
and reliable keying at any speed with dual key
inputs on the back — one for a paddle and one
for a key. You can choose between the new
Manual Weight feature where the relative length
of dots and dashes can be altered in 16 steps
between 1:2.5 and 1:4.0, or two types of AutoWeight — one that adjusts to the keying speed
automatically and one that works on a fixed
weight percentage. The Weight Reverse function
lessens the weight as the keying speed increases,
allowing for easier switching between keying
hands. And during CW message playback, the
paddle input can be prioritized with the Insert
Keying Settings function.

Packet & FSK
The packet filter bandwidth and AF input/output levels are fully selectable. You can adjust the
ACC2 (PKD) input/output and ANO output
levels.
FSK features include selectable shift frequencies between 170, 200, 425 and 850 Hz. The
KEY polarity and Hi/Low tones are switchable
to match your RTTY device (TU, MCP). The
FSK reverse function lets you match transmission methods to the other party if necessary, for
example changing the BFO frequency from LSB
(normal) to USB (reverse).

FM Features (Built-in)
The TS-570D/S(G) has built-in CTCSS
functionality with 38 sub-tones settings plus
a 1750 Hz tone and switchable Narrow/Wide
deviation modes. The sub-tone can be
set for burst or continuous, depending
on the input requirements of the target
repeater system, and can be assigned to
any of the first 90 memory channels.
FM is not necessarily included in all
models.

Other Features
Automatic Antenna Tuner
The built-in Automatic Antenna Tuner is preset for
immediate matching at 18 points between the 1.8
and 28 MHz Amateur bands. And dual antenna connectors on the TS-570D(G) are an added convenience. (The TS-570S(G) has one connector each for
HF and 6m.)

VS-3
The VS-3 option provides a synthesized voice output to aid visually-impaired operators or as an
added measure of convenience and safety for
mobile operators.
PC Control Option

You can integrate your TS-570 Series with a PC
via a 9-pin D-SUB and RS-232C interface. The
RCP-2 Radio Control Program also allows the HF
operator to set-up and program multiple radios,
and save the configuration data to disk.
DRU-3A
The DRU-3A Digital Recording Unit is an available option that enhances contesting or general
operation.
Data Transfer
Memory settings can be transferred between radios
using the copy mode.
VOX Circuit
In SSB, FM and AM modes the transmitter can be
activated by voice, with a fully selectable delay time
and gain.
Linear Amplifier Control
An external Linear Amplifier can be controlled via
the menu and the remote jack control relay.
Advanced Technology Upgrade is available in new production models and for
pre-existing TS-570D/S; contact your dealer for details.

Download free RCP-2 control software from the Internet!

INTERNET http://www.kenwood.net

5

Kenwood Sky Command System
I nno v ativ e concept allo ws the HF oper ator freedom to walk and talk
with handheld remote contr ol
The Kenwood Sky Command System (KSS) effectively puts an HF transceiver in your hand, allowing you to relax in your lounge or backyard while
controlling the TS-570D/S(G) in your shack. Or you could be sitting at a
baseball game while operating the HF transceiver safely installed in your car.
And the new Sky Command II adds the convenience of LCD confirmation
of HF frequency.
It’s not just freedom you’ll enjoy: KSS is simple and intuitive, yet amazingly powerful. Once the Transporter (TH-79AKSS or TH-D7A)* has been
wired to your TS-570D/S(G) HF transceiver, all you need to carry is the
second handheld (the Commander). The Commander transmits control
signals to the Transporter, which also relays your voice to the HF radio. In
return, HF signals are transmitted back to the Commander. This system
allows you to transmit and receive HF signals, set frequencies, switch
memory channels, and much more — all from your handheld transceiver.
* Sky Command requires two TH-79AKSS units,
while Sky Command II uses a pair of TH-D7A transceivers.

Kenwood Sky Command
Employing a pair of TH-79AKSS transceivers as Commander and Transporter,
the Kenwood Sky Command system has proved extremely effective in freeing
the HF operator from his shack. The DTMF keys enable simple pushbutton
operation of all major parameters on the TS-570D/S(G). And if the optional
VS-3 voice unit is added, you can enjoy audible confirmation of the frequency
setting. You can thus hunt DX while working around the house or garden.

Kenwood Sky Command II
Sky Command II enables full-duplex operation, adding some extra features
that further enhance functionality. For example, you can confirm HF
frequency visually on the LCD panel of the Commander (TH-D7A).
Control is effected via TNC (AX.25), and now even more HF functions are
accessible: XIT, mode switching (USB, FM, etc.), split-frequency operations
on/off, memory shift, and frequency step selection. In addition, once every
10 minutes, the Transporter (TH-D7A) will send out its pre-programmed
call sign via CW.

Kenwood Sky Command : TH-79AKSS

440MHz band

Voice signals
Control signals
HF Antenna
COM
connector
MIC

HF receive audio +

144MHz band Voice confirmation of
HF frequency
Commander (CMD)
TH-79AKSS
440MHz/144MHz (2M)

• The operator controls the TS-570D/S(G) HF transceiver from the portable Commander
(CMD) TH-79AKSS.
• Voice is transmitted from the CMD unit on the 440MHz band.
• Control signals are also sent from the CMD unit on the 440MHz band.

ø3.5 EXT SP

Transporter (TRP)
TH-79AKSS
440MHz/144MHz

PG-4R
Sky Command
Adapter

HF Transceiver
TS-570D/S(G)

• The received HF signal is re-transmitted by the Transporter (TRP) TH-79AKSS
on the 2M band.
• With an optional voice unit (VS-3) installed in the TS-570D/S(G) HF transceiver,
the operator can confirm the HF frequency.

Kenwood Sky Command II : TH-D7A

440MHz band

Voice signals
Control signals

440MHz band

Confirmation of
HF frequency

HF Antenna
COM
connector
MIC
ø3.5 EXT SP

Commander (CMD)
TH-D7A
440MHz/144MHz (2M)

144MHz band

HF receive audio

• The operator controls the TS-570D/S(G) HF transceiver from the portable Commander
(CMD) TH-D7A.
• Voice is transmitted from the CMD unit on the 440MHz band.

6

Transporter (TRP)
TH-D7A
440MHz/144MHz

PG-4R
Sky Command
Adapter

HF Transceiver
TS-570D/S(G)

• Control signals are sent from the CMD unit on the 440MHz band.
• The received HF signal is re-transmitted by the Transporter (TRP) TH-D7A on the 2M band.
• The operator can confirm the HF frequency on the LCD of the CMD.

OPTIONAL ACCESSORIES

VS-3

DRU-3A

HS-5

HS-6

LF-30A

Voice Synthesizer Unit

Digital Recording Unit

Deluxe Headphones (8 Ω)

Small Headphones (12.5 Ω)

Low-Pass Filter

MB-430

MC-43S

MC-90

MC-80

MC-60A

Mobile Bracket

Hand Microphone

DSP-Compatible Desktop
Microphone

Desktop Microphone

Deluxe Desktop Microphone

PC-1A

PG-4R

PG-2Z

PS-53

PS-40

Sky Command Adapter

DC Power Cable

Heavy-Duty Power Supply
(22.5 A)

DC Switching Power Supply

IF-232C

SO-2

SP-23

SP-50B

SP-41

Interface Unit

TCXO (Temperaturecompensated Crystal Oscillator) Unit

External Speaker

Mobile Speaker

Mobile Speaker

Phone Patch Controller
(Available only where phone patch operation is legal)

YK-88C-1*

YK-88CN-1*

YK-88SN-1*

SW-2100

MA-5

8.83 MHz CW Filter
(500 Hz bandwidth)

8.83 MHz CW Narrow Filter
(270 Hz bandwidth)

8.83 MHz SSB Narrow Filter
(1.8 kHz bandwidth)

SWR/Power Meter
(1.8~30 MHz)

5-Band Mobile Antenna

* One of 3 optional IF filters can be selected for installation.
Not all products are available in all markets.

7

SPECIFICATIONS
TS-570D(G)/TS-570S(G)
GENERAL
Transmitter Frequency Range

160, 80, 40, 30, 20, 17, 15, 12, 10,
6 [TS-570S(G) only] meter bands

Receiver Frequency Range

500 kHz ~ 30 MHz, 50 MHz ~ 54 MHz

Mode

A1A (CW), J3E (SSB), A3E (AM), F3E (FM),
F1D (FSK)

Power Requirement

13.8 V DC ±15%

Current Drain (approx.)

20.5 A (transmit), 2 A (standby)

Operating Temperature

14° F ~ +122° F (-10° C ~ +50° C)

Frequency Stability

Within ±10 x 10 -6 (±0.5 x 10 -6 with SO-2)

Antenna Impedance

50 Ω

Microphone Impedance

600 Ω

Dimensions, projections not
included (W x H x D)

10-5/8 × 3-3/4 × 10-11/16 inch
(270 × 96 × 271 mm)

Weight (approx.)

15 lbs (6.8 kg)

TRANSMITTER
RF Output Power

SSB/CW/FM/FSK: 100 W; AM: 25 W

Modulation
SSB
FM
AM

Balanced modulation
Reactance modulation
Low-power modulation

Maximum Frequency Deviation
(FM)

Less than ±5 kHz (wide)
Less than ±2.5 kHz (narrow)

Spurious Radiation

Less than -50 dB

Carrier Suppression

More than 40 dB

Unwanted Sideband
Suppression

More than 40 dB

Transmit Frequency Response
(SSB)

400 ~ 2600 Hz (within -6 dB)

XIT Variable Range

±9.99 kHz

Antenna Tunable Range

16.7 Ω ~ 150 Ω

RECEIVER
Circuitry
SSB/CW/AM/FSK
FM

Double Superheterodyne
Triple Superheterodyne

Intermediate Frequency
1st IF
2nd IF
3rd IF

73.05 MHz
8.83 MHz
455 kHz (FM only)

Sensitivity
SSB/CW/FSK (S/N 10 dB)

Less than 4 µV (500 kHz ~ 1.705 MHz),
Less than 0.2 µV (1.705 ~ 24.5 MHz),
Less than 0.13 µV (24.5 ~ 30 MHz),
Less than 0.13 µV (50 ~ 54 MHz)

AM (S/N 10 dB)

Less than 31.6 µV (500 kHz ~ 1.705 MHz),
Less than 2 µV (1.705 ~ 24.5 MHz),
Less than 1.3 µV (24.5 ~ 30 MHz),
Less than 1.3 µV (50 ~ 54 MHz)

FM (12 dB SINAD)

Less than 0.25 µV (28 ~ 30 MHz),
Less than 0.25 µV (50 ~ 54 MHz)

Squelch Sensitivity
SSB/CW/AM/FSK

FM
Spurious Response
Image Ratio
IF Rejection
Others
Selectivity
SSB/CW

Less than 20 µV (500 kHz ~ 1.705 MHz),
Less than 2 µV (1.705~ 30 MHz),
Less than 2 µV (50 ~ 54 MHz)
Less than 0.25 µV (28 ~ 30 MHz),
Less than 0.25 µV (50 ~ 54 MHz)
More than 70 dB
More than 70 dB
More than 50 dB
More than 2.2 kHz (-6 dB),
Less than 4.4 kHz (-60 dB)

AM (wide mode)

More than 4.0 kHz (-6 dB),
Less than 20.0 kHz (-50 dB)

FM

More than 12.0 kHz (-6 dB),
Less than 25.0 kHz (-50 dB)

RIT Variable Range

±9.99 kHz

Beat Elimination

More than 40 dB

Audio Output Power

More than 1.5 W
(8 Ω, 10% distortion, with -53 dBm input)

Audio Output Impedance

8Ω

Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
These specifications are guaranteed for Amateur Bands only.

C

ER

TIFIE

D

14-6, 1-chome, Dogenzaka, Shibuya-ku, Tokyo 150-8501, Japan

P.O. Box 22745, 2201 East Dominguez St., Long Beach, CA 90801-5745, U.S.A.
Customer Support/Brochures (310) 639-5300
6070 Kestrel Road, Mississauga, Ontario, Canada L5T 1S8



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2000:02:09 01:11:55
Producer                        : Acrobat Distiller 4.05 for Macintosh
Modify Date                     : 2000:02:10 10:40:08-08:00
Page Count                      : 8

EXIF Metadata provided by EXIF.tools