Kenwood Stereo Receiver Krf X9995D Users Manual

2015-01-23

• KRF-X9995D
  • Using Your New Kenwood Audio-Video Receiver
  • Table of Contents
  • Chapter One: Moving Around
    • What’s on the Front Panel of Your Kenwood Audio-Video Receiver?
    • What’s on PowerTouch?
    • What’s on PowerTouch’s Screen?
    • How is PowerTouch Powered ?
    • How Do I Use PowerTouch?
      • How Do I Move Around?
      • How Do I Enter Text?
  • Chapter Two: Using PowerTouch
    • How Do I Adjust the Sound?
      • Turning the Speakers On
      • Adjusting the Volume
      • Adjusting the Loudness (Only in STEREO mode with THX mode Off)
      • Adjusting the Tone (Only in STEREO mode with THX mode Off)
      • Adjusting Speaker Levels
      • Muting Sound
      • Midnight Theater Function (Dolby Digital, DTS and DTS-ES only)
      • To balance volume extremes
    • How Do I Adjust the Surround Modes?
      • What is the THX?
      • What are Listen Modes?
      • To check the Surround Play Status
      • Input Modes (only for input with digital jacks)
      • To set the Input Mode manually
      • To set the THX Mode
      • To set the Listen Mode manually
      • Selectable Listen Modes
      • Selecting the Pro Logic Mode with PowerTouch
      • Description of Dolby Pro Logic II: Music Mode
      • Applying Digital Signal Processor (DSP) Effects
      • To set a DSP effect:
      • HDCDR and D.R.I.V.E. Effects
      • Headphone Operation
    • How Do I Operate Devices?
      • Controlling a device without altering the receiver's input selection(Operations using the SHIFT button):
      • HOME1, HOME2 Devices
      • Playback of the device connected to the CD2/TAPE2 MONITOR
      • CD player
      • Displaying Disc and Track Titles
      • Entering Disc and Track Titles
      • Displaying Disc and Track Titles
      • Entering Disc and Track Titles
      • Single CD or Carrousel CD Player
      • CD-R Recorder
      • MD Recorder
      • Tape Deck
      • Turntable
      • Tuner
      • TV
      • VCR/PVR
      • DVD Player
      • Laser Disc Player
      • Operation on the More menu
      • The receiver should be ON to use the Macro function.
    • How Do I Record? (Edit Mode)
      • Digital to Digital Recording
      • Digital to Analog Recording
    • How Do I Adjust PowerTouch’s Display?
      • How Do I See PowerTouch in the Dark?
      • How Do I See PowerTouch’s Screen More Clearly?
      • How Do I Turn the Beeping On or Off?
      • Using PowerTouch to Dim or Brighten the Receiver’s Front Panel
      • Changing the Front Panel Display Mode
    • How Do I Perform Several Actions at Once?
      • Creating Macros
      • To check a Macro
      • Modifying a Macro
      • Using Macros
    • How Do I Control Home Automation Equipment? (for U.K. only)
      • To switch on or switch off the RELAY CONTROL output using PowerTouch
      • To switch the video and audio outputs to Zone A or Zone B while Zone A or Zone B is selected
      • Lutron
      • Makita
      • Accessories Control
  • Chapter Three: Using PowerTouch in Multiple Zones
    • How Do I Switch Control Modes?
      • Why Don’t I See All My Devices?
    • How Do I Operate Devices?
      • Operating Devices in Zone A
      • Operating Devices in Zone B
      • Operation using the SYS.POWER button on PowerTouch
    • Chapter Four: Troubleshooting
    • Sound
      • I don’t hear any sound at all.
      • Audio is not output only when a 96k fs compatible disc is played.
      • The 96k fs indicator does not light while a 96k fs compatible disc is being played.
      • I can’t hear sound from one or more of the speakers, or the sound is abnormally low.
      • I can’t hear sound from my surround or center speakers.
      • I can hear sound only from the center speaker when Dolby ProLogic is selected.
      • A DTS-ES encoded source is played but it is not decoded in DTS-ES.
      • A Dolby Digital Surround EX-encoded source is played with THX Surround EX set to “Auto”, but the source is not reproduced in 6.1-channel audio.
      • Sound from one (or more) of my devices is abnormally loud or soft
      • I can’t hear sound from some of my laser discs.
      • There wasn’t any sound recorded on tapes made on my VCR or tape deck.
      • The initial sound is intermittent or non-existent when I start to play from a Dolby Digital, DTS, DTS-ES or MPEG source.
      • With a Dolby Digital program or DTS program, the loud sounds aren’t very loud and the quiet sounds aren’t very quiet.
      • All I hear is loud static when I play DTS discs.
      • I hear a hum when I select the PHONO input.
      • Sound is intermittent.
      • I can’t hear any sound in Zone B.
    • Video
      • I can’t see the program I’m playing on the TV.There wasn’t any video output to my VCR when I recorded
    • PowerTouch
      • I don’t see icons for all my devices.
      • I don’t see icons for all the devices I set up.
      • When I select a device icon, I don’t see any commands.
      • My PowerTouch is slow to respond—sometimes I have to press buttons or select commands several times.
      • My PowerTouch is not responding.
      • My PowerTouch is beeping. What does that mean?
      • PowerTouch does not "learn" new commands or functions.
      • I want to clear all the items in PowerTouch and make it to the factory-set default condition.
    • Receiver/Tuner
      • My receiver won’t turn on and the STANDBY indicator is flashing.
      • The sound is distorted, and the CLIP indicator on the receiver’s front panel flashes red continually, or stays red for more than 1 second at a time.
      • I can’t access any RDS (Radio Data System) functions (for U.K. only)
      • I can’t receive a radio station.
      • I’m getting a lot of static/interference.
      • When I press a button to tune to a preset station, the receiver does not respond.
      • Macro is not running as I programmed.
  • Index
    • Numerics