Kenwood Stereo System Ts 590S Users Manual 590_EN_20110515

2015-01-23

• RECEPTION
  • 1.1 Type of Conversion
  • 1.2 Down Conversion
  • 1.3 Up Conversion
  • 1.4 RX Auxiliary Circuits
• TRANSMISSION
  • 2.1 Kenwood Traditional Transmitting Circuitry
    • 2.1.1 IF Circuits
    • 2.1.2 FET Final Circuit
  • 2.2 High-speed Relay-controlled Antenna Tuner
  • 2.3 REMOTE Connector
  • 2.4 DRV Terminal
• LOCAL OSCILLATOR
• DSP
  • 4.1 Multipurpose 32-bit Floating Point DSP
  • 4.2 Advanced AGC Control via IF Digital Processing
  • 4.3 Interference Elimination Within AGC Loop
    • 4.3.1 Digital IF Filter
    • 4.3.2 Types of Digital IF Filters
    • 4.3.3 Manual Notch Filter and Auto Notch Filter
    • 4.3.4 Digital Noise Blanker (NB2)
  • 4.4 Demodulation
  • 4.5 Modulation
  • 4.6 DSP-based Auxiliary Circuits (for RX)
    • 4.6.1 Beat Cancel (AF Processing)
    • 4.6.2 Noise Blanker NB2 (IF Processing)
    • 4.6.3 Overview of Noise Reduction
    • 4.6.4 NR1 (Spectral Subtraction Method) (AF Processing)
    • 4.6.5 NR1 (Based on a Line Enhancer) (AF Processing)
    • 4.6.6 NR2 (AF Processing)
  • 4.7 DSP-based Auxiliary Circuits (for TX)
    • 4.7.1 Speech Processor (AF Processing)
  • 4.8 DSP-based Auxiliary Circuits (Common to TX/RX)
    • 4.8.1 TX Equalizer & RX Equalizer (AF Processing)
• SOFTWARE: ENHANCING OPERATING PLEASURE
  • 5.1 Extended Data-mode Related Functions
  • 5.2 Drive Out
  • 5.3 Single Button Toggles IF Filters between A and B
  • 5.4 Double Function Keys and Hold Time Selection
  • 5.5 Mode Selection of Built-in Electronic Keyer
  • 5.6 Switchover of Shift Frequency Interlocked with Change of Pitch Frequency
  • 5.7 Power-on Message
  • 5.8 Quick Memory Function
  • 5.9 Cross Tone Function
  • 5.10 PF Keys
  • 5.11 Expansion of Voice Guide Function (Optional VGS-1 Required)
  • 5.12 Easy Updating of Firmware
• APPEARANCE DESIGN: “DESIGN CONCEPT” REVEALED BY DESIGNING ENGINEER
• STRUCTURAL FEATURES
  • 7.1 Cooling
  • 7.2 LCD
  • 7.3 Main Control Knob
• EXPANSIVE APPLICATION SOFTWARE
  • 8.1 Windows Related Software
  • 8.2 System Configurations
    • 8.2.1 Controlling TS-590S from a PC using the COM Connector
    • 8.2.2 Controlling TS-590S from a PC using the USB Connector
    • 8.2.3 Controlling TS-590S from a PC using the COM and ACC2 connectors (microphone and speaker connected to the PC to be used)
    • 8.2.4 Controlling TS-590S from a PC using the USB connector (microphone and speaker connected to the PC to be used)
    • 8.2.5 Controlling TS-590S from a PC on a Remote Site
  • 8.3 New ARCP-590 (Amateur Radio Control Program for TS-590S) Freeware
    • 8.3.1 Basic Specifications Inherited from ARCP-480
    • 8.3.2 User Interfaces
    • 8.3.3 KNS (Kenwood Network Command System)
    • 8.3.4 Visual Scan
    • 8.3.5 Audio Equalizer
  • 8.4 ARHP-590 (Amateur Radio Host Program) Freeware
    • 8.4.1 Basic Specifications Inherited from ARHP-10
    • 8.4.2 User Interfaces
    • 8.4.3 KNS (Kenwood Network Command System)
    • 8.4.4 Disabling AF Gain Control from ARCP-590
  • 8.5 New ARUA-10 (USB Audio Controller) Freeware
    • 8.5.1 Basic Functions
    • 8.5.2 Operation
    • 8.5.3 Setup
    • 8.5.4 Starting and Stopping ARUA-10
    • 8.5.5 Adjusting Volume
    • 8.5.6 Automatic Execution when Windows Starts
  • 8.6 New ARVP-10H (Amateur Radio VoIP Program) Freeware
    • 8.6.1 Basic Functions
    • 8.6.2 Setup of ARVP-10H (Host Station)
    • 8.6.3 Making ARVP-10H (host station) Online or Offline
    • 8.6.4 Setup of ARVP-10R (remote station)
    • 8.6.5 Connecting and Disconnecting ARVP-10R (Remote Station)
    • 8.6.6 Adjusting Volume
  • 8.7 New Virtual COM Port Driver
• OPTIONAL ACCESSORY
  • 9.1 PS-60 Regulated DC Power Supply
  • 9.2 Rectifier Circuit
  • 9.3 Switching Circuit, Constant-voltage Circuit and Protection Circuit