Kenwood Ktc Sr901 Owner S Manual

2014-07-06

: Kenwood Kenwood-Ktc-Sr901-Owner-S-Manual kenwood-ktc-sr901-owner-s-manual kenwood pdf

Open the PDF directly: View PDF PDF.
Page Count: 13

KTC-SR901
SIRIUS SATELLITE RADIO TUNER 3page 2- 12
INSTRUCTION MANUAL
SINTONIZADOR DE RADIO POR SATÉLITE SIRIUS
3página 14 - 24
MANUAL DE INSTRUCCIONES
© PRINTED IN JAPAN B64-2324-20/01 (K) (A)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help
you obtain the best performance from your new sirius satellite
radio tuner.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below.
Refer to the model and serial numbers whenever you call upon your
KENWOOD dealer for information or service on the product.
Model KTC-SR901 Serial number
KTC-SR901_r5 02.12.13 6:20 PM Page 1
Contents
2-English
Safety precautions...................................................................3
Operations
Sirius ID [ESN] display .........................................................................................4
Selecting Sirius Mode..........................................................................................4
Switching Seek Mode..........................................................................................4
Selecting the Preset Band ...................................................................................5
Channel Preset Memory......................................................................................5
Preset Tuning .......................................................................................................6
Channel Scan .......................................................................................................6
Channel Search....................................................................................................6
Switching Category..............................................................................................6
Direct Access Tuning ...........................................................................................7
Switching Display.................................................................................................7
Installation
Accessories..........................................................................................................8
Installation Procedure ..........................................................................................8
Connecting Wires to Terminals............................................................................9
Installation..........................................................................................................10
Troubleshooting Guide ..........................................................11
Specifications ........................................................................12
❈Displays shown in this manual are for descriptive purposes only, and may differ from actual displays.
KTC-SR901_r5 02.12.13 6:20 PM Page 2
English- 3
Safety precautions
To prevent injury and/or fire, take the
following precautions:
•When extending the battery, or ground wires,
make sure to use automotive-grade wires or
other wires with a 0.75mm2 (AWG18) or more
to prevent wire deterioration and damage to
the wire coating.
•Insert the unit all the way until it is fully locked
in place. Otherwise it may fly out of place
during collisions and other jolts.
•To prevent short circuits, never put or leave any
metallic objects (e.g., coins or metal tools)
inside the unit.
•If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
•Be careful not to drop the unit or subject it to
strong shock.
To prevent damage to the machine,
take the following precautions:
•Make sure to ground the unit to a negative 12V
DC power supply.
•Do not open the top or bottom covers of the
unit.
•Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
•When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse with
the wrong rating may cause your unit to
malfunction.
•During installation, do not use any screws
except for the ones provided. The use of
improper screws might result in damage to the
main unit.
•When drilling a hole in the car to fix the
brackets, make sure not to damage the fuel
tank, brake tube, wiring harnesses, etc. on the
other side.
•If you experience problems during installation,
consult your Kenwood dealer.
•If the unit does not seem to be working right,
try pressing the reset button on the control unit
first. If that does not solve the problem, consult
your Kenwood dealer.
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to
this equipment may cause harmful interference
unless the modifications are expressly
approved in the instruction manual. The user
could lose the authority to operate this
equipment if an unauthorized change or
modification is made.
Cleaning the Unit
If the front panel is dirty, wipe it clean with a
silicon cloth or soft dry cloth with the power
off.
Do not use hard cloths or paint thinner, alcohol,
or other volatile solvents. These may damage
external surfaces or remove indicator
characters.
IMPORTANT INFORMATION
About the disc changer to be
connected:
To connect a disc changer having the "O-N"
switch to this unit, set the "O-N" switch to "N".
To connect a disc changer having no "O-N"
switch to this unit, the converter cord CA-
DS100 and/or switching adapter KCA-S210A
are required as options.
2CAUTION
NOTE
2CAUTION
2WARNING
KTC-SR901_r5 02.12.13 6:20 PM Page 3
What is Sirius Satellite Radio?
4-English
Operations
Sirius is radio the way it was meant to be: up to
100 new channels of digital quality programming
delivered to listeners coast to coast via satellite.
That means 60 channels of completely
commercial-free music. Plus up to 40 more
channels of news, sports, and entertainment
from names like CNBC, Discovery, SCI-FI
Channel, A&E, House of Blues, NPR,
Speedvision and Comedy World.
Sirius is live, dynamic entertainment, completely
focused on listeners. Every minute of every day
of every week will be different. All 60
commercial-free music channels are created in-
house and hosted by DJs who know and love
the music. Do you like Reggae? How about
Classic Rock or New Rock? Sirius has an array of
choices spanning a vast range of musical tastes
including the hits of the 50’s, 60’s, 70’s, & 80’s
as well as Jazz, Country, Blues, Pop, Rap, R&B,
Bluegrass, Alternative, Classical, Heavy Metal,
Dance and many others…
From its state-of-the-art, digital broadcasting
facility in Rockefeller Center, New York City,
Sirius will deliver the broadest, deepest mix of
radio entertainment from coast to coast.
Sirius will bring you music and entertainment
programming that is simply not available on
traditional radio in any market across the country.
It’s radio like you’ve never heard before.
So Get Sirius and Listen Up! For more
information, visit siriusradio.com.
There are three kinds of actions (A, B and C)
that have different functions depending on
Control units to be connected.
See the description below to identify which
action, A, B or C, your Control unit perform.
A:KDC-X859,KDC-X759,KDC-MP919,
KDC-MPV7019,KDC-MPV619,KDC-X959,
KDC-X659,KDC-MP819,KDC-719,KDC-X559
B:KDC-X917,KDC-X817,KDC-9017,
KDC-X717,KDC-V7017,KDC-716S,KRC-535,
KRC-435,KDC-519,KDC-X459,KDC-419,
KDC-5019,KDC-4019, KDC-319
C:Z828,Z727,Z910DVD
❈:KVT-M700,KVT-911DVD
See each instruction manual for details on the
operation of KVT- M700 and KVT- 911DVD.
<A models>
Select the ESN (Electronic Serial Number)
item in MENU of Control unit to display ESN.
<B models>
Press the [DISP] button repeatedly until ESN
mode is displayed.
<C models>
1Press the [S.A] button to enter the display
control mode.
2Press the [4] or [¢]button to select
the "ESN" display.
3Press the [S.A] button.
Serial & Sirius ID [ESN]
It is especially important to retain the unit
serial number and the electronic Sirius
Identification number for service activation
and potential future service changes.
Press the [SRC] button. Select the "SIRIUS"
display.
•You need to subscribe to SIRIUS to receive
the service by Sirius Satellite Radio. Consult
SIRIUS if ”CALL 888-539 SIRIUS TO
SUBSCRIBE”/”CALL 888 539-SIRI” appears.
•It may take a little time to start receiving
after you selected the SIRIUS source.
•If the signal receiving fails, ”Acquiring
Signal”/”Linking” appears.
•Select the SIRIUS/DAB setting item in
MENU for Control unit B, and then set
”SIRIUS ”.
Selecting Sirius Mode
Sirius ID [ESN] display
KTC-SR901_r5 02.12.13 6:20 PM Page 4
Sets the seeking mode.
<A models>
Press the [AUTO] button.
Each time the button is pressed the Seek
mode switches as shown below.
Display Operation
"Channel" Normal manual seeking
control.
"Preset" Search in order of the
channels in the Preset
memory.
You cannot operate this unit during switching
Channel or Category.
<B models and C models>
Select Seek Mode in the MENU items of
Control unit to press the [4]or [¢] button.
Each time the button is pressed the Seek
mode switches as shown below.
Display Operation
"AUTO1" Press the [ ¢] button to
seek for channels up the
band.
Press the [ 4] button to
seek for channels down
the band.
"AUTO2" Press the [ ¢] button to
move to the next preset
channel.
Press the [ 4] button to
move to the last preset
channel.
"MANUAL" Press the [ ¢] button to
increase
Press the [ 4] button to
decrease.
<A models>
Press the [FM] button.
Each time the button is pressed the preset
band switches between the SR1,SR2,SR3 and
SR4.
<B models and C models>
Press the [FM] button.
Each time the button is pressed the preset
band switches between the SR1/Si1,SR2/Si2
and SR3/Si3.
Putting the channel in the memory.
<KDC-X859,KDC-X759,KDC-MP919>
1Select the preset band
Press the [FM] button.
2Enter Memory mode
Press the [#3] button for at least 1
second.
"Preset Memory" is displayed.
3Select the channel to put in the
memory
Press the [4] or [¢] button.
4Select the preset number
Press the [FM] or [AM] button.
5Put the channel in the memory
Press the [#3] button for at least 2
seconds.
The preset number display blinks 1 time.
6Repeating steps 3 to 5 and putting the
desired channel in the memory.
On each band, 1 channel can be put in the
memory on each [#1] — [#6].
7Exit Memory mode
Press the [#3] button.
<Others>
1Select the preset band
Press the [FM] button.
2Select the channel to put in the
memory
Press the [4] or [¢] button.
3Put the channel in the memory
Press the [#1] — [#6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 channel can be put in the
memory on each [#1] — [#6] button.
•Only the channel number is stored. Category
information is not stored.
•You can set up to 6 memories even on a
control unit with 8 preset buttons.
Channel Preset Memory
Selecting the Preset Band
Switching Seek Mode
English- 5
Operations
KTC-SR901_r5 02.12.13 6:20 PM Page 5
Operations
6-English
Calling up the channels in the memory.
<KDC-X859,KDC-X759,KDC-MP919>
1Select the preset band
Press the [FM] button.
2Call up the channel
Press the [#1] —[#4] button.
The channels are called up as shown
below.
Press button Call up number
[#1/5] No.1 No.5
[#2/6] No.2 No.6
[#3] No.3
[#4] No.4
Each time the button is pressed, the
called up channel switches cyclically.
<Others>
1Select the preset band
Press the [FM] button.
2Call up the channel
Press the [#1] — [#6] button.
Every receivable Channel is checked for 10
seconds.
<KDC-X859,KDC-X759,KDC-MP919>
Select SCAN in the MENU items of Control
unit, and press the [4] or [¢] button for
at least 1 second.
Canceling Channel Scan
Press the [4] or [¢] button for at least 1
second, or press the [MENU] button to
release MENU.
<Others>
Press the [AUTO] button for at least 2
seconds.
Canceling Channel Scan
Press the [AUTO] button for at least 2
seconds.
You can switch from Up/Down of Channel
in a category being selected to
Previous/Next of Category that includes
Channel being received and vice versa.
<KDC-X859,KDC-X759,KDC-MP919>
1Enter Channel Search mode
Press the [#2] button for at least 1
second.
2Select the Channel
Press the [4] or [¢] button.
Select the Category
Press the [FM] or [AM] button.
Canceling Channel Search
Press the [#2] button.
<Others>
1Enter Channel Search mode
Press the [38] button.
2Select the Channel
Press the [4] or [¢] button.
Select the Category
Press the [FM] or [AM] button.
Canceling Channel Search
Press the [38] button.
You cannot operate this unit until all the
Category information is acquired.
The Category that includes the Channel
received switches to the next.
Press the [AM] button.
•If there is no receivable Channel in Category,
the Category switches to the next.
•You cannot operate this unit until all the
Category information is acquired.
•Select category to switch to the first channel
that contains that category. Select another
channel in the same category, if necessary,
on the display of the category name.
Switching Category (B models
and C models)
Channel Search (A models only)
Channel Scan (A models only)
j
j
Preset Tuning
KTC-SR901_r5 02.12.13 6:21 PM Page 6
English- 7
Entering the channel and tuning.
1Enter Direct Access Tuning mode
Press the [DIRECT] button on the
remote.
2Enter the channel
Press the number buttons.
3Do Channel Search
Press the [4] or [¢] button.
Canceling Direct Access Tuning
Press the [DIRECT] button on the
remote.
•If you make no button operation for 10
seconds, the Direct Access Tuning mode is
automatically canceled.
•You can set up to Channel number 223.
•If there is no signal in the input Channel, ”NO
CHANNEL ”/”NO CH ” appears.
•If you cannot receive any signal in the input
Channel due to a bad condition on radio wave
or another problem, ”Acquiring Signal”
appears.
You can display various kinds of text data
transmitted from broadcasting stations by
switching as follows. (See the Display
Switch items of Control unit for details on
how to switch.)
What is displayed may partly depend on
control units to be connected.
<KDC-X859,KDC-X759,KDC-MP919,
KDC-X959,KDC-X659, KDC-MP819,KDC-
719,KDC-X559>
Information (Upper Part Display)
Band & Channel Number
Channel Name
Song Title
Artist Name
Album Title
Category Name
Information (Lower Part Display)
Album Title
Artist Name
Song Title
Channel Name
You cannot apply the same setting to Upper
Part and Lower Part.
<KDC-MPV619,KDC-MPV7019>
Information
Band & Channel Number
Channel Name
Song Title
Artist Name
Category Name
<Z828,Z727,Z910DVD>
Information (Upper Part Display)
Channel Number & Channel Name
Song Title & Artist Name & Album Title
Category Name
ESN
Channel Number
Information (Lower Part Display)
Channel Number & Channel Name
Song Title & Artist Name & Album Title
You cannot apply the same setting to Upper
Part and Lower Part.
<Others (B model)>
Information
Channel Number & Channel Name /
Channel Name
Song Title & Artist Name & Album Title
Category Name
ESN
Channel Number
Switching Display
Direct Access Tuning (A models
only) (Function of remote)
KTC-SR901_r5 02.12.13 6:21 PM Page 7
8-English
The use of any accessories except for those provided might result in damage to the unit. Make
sure only to use the accessories shipped with the unit, as shown above.
2CAUTION
Accessories
1
2
3
4
5
6
Installation Procedure
1. To prevent short circuits, remove the key
from the ignition and disconnect the -
terminal of the battery.
2. Install the Sirius antenna and connect the
antenna wire to the Sirius satellite radio
tuner.
3. Connect the Sirius satellite radio tuner and
the control unit using the provided Sirius
connection wire.
4. Make the proper input and output wire
connections for each unit.
5. Connect the battery wire and ground wire to
the Sirius satellite radio tuner.
6. Install the unit in your car.
7. Reconnect the -terminal of the battery.
8. Press the reset button on the control unit.
•Do not connect the Sirius control wire
while the control unit is turned ON.
•Be sure to press the reset button on the
control unit after installation.
•If your car is not prepared for this special
connection-system, consult your
Kenwood dealer.
•Make sure that all wire connections are
securely made by inserting jacks until
they lock completely.
2CAUTION
•Some disc changers need conversion
wires for connection. See the section on
"Safety Precautions" for details.
•Do not let unconnected wires or
terminals touch metal on the car or
anything else conducting electricity. To
prevent short circuits, also do not
remove the caps on the ends of the
unconnected wires or the terminals.
•If the fuse blows, first make sure that the
wires have not caused a short circuit, then
replace the old fuse with one with the
same rating.
•Insulate unconnected wires with vinyl
tape or other similar material.
•Take care so that the antenna wire and
other connection wires are not caught by
mobile parts. Otherwise wire
disconnection or other trouble may
result.
•Do not apply too much force on the
antenna wire, other connection wires
and connectors by bending a wire, etc.
Otherwise wire disconnection or other
trouble may result.
•After the unit is installed, check whether
the brake lamps, indicators, wipers, etc.
on the car are working properly.
KTC-SR901_r5 02.12.13 6:21 PM Page 8
English- 9
Connecting Wires to Terminals
+-
TERR SAT
ANT
FUSE 3A
BATT GND
TO HEAD UNIT
TO CHANGER
TERR SAT
ANT
FUSE 3A
BATT GND
Control unit
Sirius
Satellite
Radio tuner
Disc changer
To KENWOOD disc changer / DAB
control input / Sirius control input
Sirius connection wire
(Accessory1)
To control unit
Fuse (3A)
KENWOOD disc changer
control input Sirius antenna
wire
Sirius antenna
(Separated-sale
product)
Ground wire
(Commercially available)
Battery wire
(Commercially available)
Battery
To connect the Disc changer,
consult your Disc changer
manual.
NOTE
Connection wire
(supplied with the
Disc changer)
(Front side)
(Rear side)
Power terminal
Pass battery and ground wires through
supplied terminal cover and connect to
respective terminals. After completing
connections, fasten terminal cover5over
terminal bracket.
Terminal cover
(Accessory5)
Lead terminal
(Commercially
available)
Car fuse
box (Main
fuse)
Connect the KTC-SR901 to the
terminal labelled TO CHANGER 2.
Set the PROTOCOL selection
switch to "N" position.
NOTE
CHANGER
CHANGER 2
TO
CHANGER 1
TO
H/U
TO
SWITCH
AUX
OFF ON
SWITCH
PROTOCOL
ON
IN
AUX
]“N”
HEAD UNIT
TO TO
Disc changer
Control unit
■If you want to connect KCA-S210A
KCA-S210A
Sirius Satellite Radio tuner
Terminal cover
(Accessory5)
KTC-SR901_r5 02.12.13 6:21 PM Page 9
10 -English
SIRIUS SATELLITE RADIO TUNER
KTC–SR901
FUSE 3A
TO H
EAD UNIT TO CHANGER
BATTGNDTERRSAT
ANT
•Installation using the self-tapping screws
Carpet
Board etc.
thickness: 20 mm or more
Carpet
Accessory4(Ø5 ×20 mm)
Accessory2
Accessory3
(M4 ×8 mm)
•Installation using the velcro tapes
Accessory6
Installation
■Mounting the Sirius Satellite radio tuner Unit
•Install the Sirius satellite radio tuner unit
in a well-ventilated location and do not
place objects on top of it.
•The Sirius satellite radio tuner unit is
equipped with a cooling fan to lower the
internal temperature. Do not block the holes
of the cooling fan at the time of installation.
Blocking the holes of the cooling fan will
cease to allow the temperature to be
lowered and will cause breakdown.
•When installing to the car, the unit should
be securely fastened at a location that will
not interfere with driving.
2CAUTION •When making a hole in the chassis, check
that the gas tank, break pipe, wire
harness, or other part is not located on
the other side, and be careful not to cause
scratches.
•When attaching the mounting fittings
(Accessory2) to the Sirius satellite radio
tuner unit, use only the supplied mounting
screws (Accessory3) (M4 x 8 mm). Use
of screws other than those supplied may
result in internal damage or insecure
mounting and is very dangerous.
Please do not install the unit near the dashboard, the rear tray, or other
important components. Doing so could lead to injury or accident should
the unit come off due to a shock and strike a person or an important
component.
Tapping screws should be used for mounting. (Attachment with velcro
strips, although easy, can come off with a shock.)
2CAUTION
KTC-SR901_r5 02.12.13 6:21 PM Page 10
English- 11
What might appear to be a malfunction in your unit may just be the result of
slight misoperation or miswiring. Before calling service, first check the following
table for possible problems.
SOLUTIONPOSSIBLE CAUSEPROBLEM
Nothing happens when
the buttons are pressed.
The computer chip in the unit is not
functioning normally.
Press the reset button on the Control
unit .
The Sirius mode cannot
be selected.
The Sirius connection wire is not
connected.
Use the Sirius connection wire to
connect the control unit and the Sirius
satellite radio tuner.
Troubleshooting Guide
No sound can be heard,
or the volume is low.
The input/output wires or wiring
harness are connected incorrectly.
Reconnect the input/output wires and/or
the wiring harness correctly. See the
section on "Connecting Wires to
Terminals".
No subscription is established. Subscribe to SIRIUS.
The following messages are displayed when certain problems are occurring in
your system. Take the recommended actions.
ANTENNA ERROR / ANT ERR :
Antenna is not connected correctly.
Make sure the antenna is connected correctly and then turn OFF/ON of the SIRIUS
source or Control unit.
TUNER ERROR / TUNE ERR :
Broadcast cannot be received due to an error in this unit.
Turn OFF/ON of the SIRIUS source or Control unit, or press the reset button of
Control unit.
ESN ERROR / ESN ERR :
ESN (Electronic Serial Number) is not registered in this unit.
Consult your nearest service center.
]
]
]
The PROTOCOL selection switch of the
changer switching unit "KCA-S210A" is
not set properly.
Set the PROTOCOL selection switch to
"N" position.
The fuse has blown. After checking for short circuits in the
wires, replace the fuse with one having
the same rating.
Connect the power supply of the Sirius
satellite radio tuner.
Connect the battery wire and ground
wire to the Sirius satellite radio tuner.
No broadcast can be
received.
The Sirius antenna is not connected. Connect it properly by referring to
"Connecting Wires to Terminals".
The changer switching unit "KCA-
S210A" is not connected properly. Connect the KTC-SR901 to the terminal
labelled TO CHANGER 2. See the
section on "Connecting Wires to
Terminals".
If you use this for the first time, it may be difficult to receive signals in the
beginning. In such a case, leave the SIRIUS source ON for 3 minutes and turn it
OFF and ON.
KTC-SR901_r5 02.12.13 6:21 PM Page 11
12 -English
Specifications
Sirius tuner section
Frequency range (Overall) ..................................................2320 MHz – 2332.5 MHz
Frequency range (TDM Channel#1(fc)) ................................................2322.293 MHz
Frequency range (COFDM Channel(fc)) ................................................2326.25 MHz
Frequency range (TDM Channel#2(fc)) ................................................2330.207 MHz
Usable sensitivity (TDM Channel) ............................................ - 74 dBm – - 46 dBm
Usable sensitivity (COFDM Channel) ........................................ - 80 dBm – + 4 dBm
General
Operating voltage ..........................................................14.4 V (11 – 16 V allowable)
Current consumption ....................................................................................800 mA
Operational temperature range..........................................................-20 °C – +70 °C
Installation size (W ×H ×D) ..............................................179.6 ×30.0 ×159.6 mm
7-1/16 ×1-3/16 ×6-1/4 in.
Weight: ............................................................................................1.543 lbs (700 g)
Specifications subject to change without notice.
KTC-SR901_r5 02.12.13 6:21 PM Page 12
English- 13
KTC-SR901_r5 02.12.13 6:21 PM Page 13

Navigation menu