Kesi E commerce S3 Bluetooth headset User Manual
Shenzhen Kesi E-commerce Co.,Ltd Bluetooth headset
User Manual
Shenzhen Kesi E-commerce Co.,Ltd User Manual Part Name Bluetooth headset Part Model S3 Edition A0 Date 2018-01-12 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This specification is applicable to the S3 ear mounted Bluetooth headset. Product drawings parameter Bluetooth version Bluetooth Wireless working distance 30 米 Reception sensitivity -88+/-2dBm Music work time ≥5H Call time ≥5.5H Standby time ≥170H Maximum working current ≤15mA Standby current <30uA 2.4GHz-2.480GHz Receiving frequency V4.0 Audio frequency ≥60dB 20Hz-20KHz Distortion degree ≤4% Left and right channel isolation ≥60dB Dustproof and waterproof grade IP57 Environmental protection requirements ROHS Certification requirements BQB/FCC/ESD/MSDS/ROHS Signal-to-noise ratio Functional description Key category multiple use key (power button) Effect Turn On Turn Off Enter the pairing state Phonetic dial-up re-dial current state Turn Off connected (non - call) Turn Off connected (non - call) connected (non - call) Playing connected suspend Music Playing Answer refuse The first call entered The first call entered Hang up Hang up the current call, at the same time Answer second calls Keep the current call, while Answer second calls Hang up the current call, automatically activate the reserved phone swap calls In the call Second during Second during incoming calls the call incoming calls the call Three party calls Three party calls operation Long press 2s Long press 3s Long press 5s double-click Long press 2s Short press 1times Short press 1times Short press 1times Long press 2s Short press 1times Short press 1times Long press 2s Short press 1times Long press 2s Volume plus key Volume reductio 10 11 12 13 Switching audio The volume is increased by one step Close the mute The next The volume is reduced by one step Open the mute The last song In the call In the call or Playing Music both sides In the call Music Playing Call or PlayingMusic both sides In the call Music Playing double-click Short press 1times double-click Long press 2s Short press 1times double-click Long press 2s Pairing name: Turn On Automatically connect a pair of mobile phones The pairing state lasts for 5 minutes, such as pairing failure, automatically Turn Off. Automatically Turn Off after disconnecting the connection for 5 minutes Synchronous display of iPhone cell phone IPhone cell phone volume regulation synchronization Mute hints per 10s 1 times Can connect 2 mobile phones at the same time Recharge reposition The low voltage is 3.3V, and the low power prompt is 1Times every 5 minutes. Automatic Turn Off when the battery voltage is less than 3.0V Beyond the distance, it will return to the effective distance within 5 minutes and automatically connect to the device. Auto Enter the pairing state after setting up the factory setting state Turn On Turn Off Pairing state connected No connected Restore factory settings Charging Full of electricity Playing Music Low electric state In the caller LED light indication Blue light on 1s Red light on 1s 红 Blue light Alternate scintillation 200ms ON Blue light per 10s flash 1times 500ms ON Blue light per 1s flash 1times 1000ms ON Red/Blue light Simultaneous flash Red light Always on Blue light Always on Blue light per 10sflash 1times 2times 100ms ON 500ms ON Blue light turn Red light (Red light flash) Blue light per 10s state 3times 100ms ON 100ms OFF state Turn On Turn Off Enter the pairing state Answer the phone Hang up the phone warning tone Two times short note One times short note One times short note 200ms OFF 100ms OFF Reject a call Volume is added to the maximum Reduce the volume to the minimum swap calls Open the mute OFF the mute Mute hint Restore factory settings One times short note One times short note One times short note One Two Two Two Two times times times times times short short short short short note note note note note
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 5 Language : zh-CN Tagged PDF : Yes Author : Administrator Creator : Microsoft Office Word 2007 Create Date : 2018:04:01 01:32:21 Modify Date : 2018:04:01 01:32:21 Producer : Microsoft Office Word 2007EXIF Metadata provided by EXIF.tools