Ki Ryung Electronics NICE Navigation System User Manual 517870

Ki Ryung Electronics Co., Ltd. Navigation System 517870

Users Manual

TransitionDiagram.doc Page 1 Clarion Navigation “N.I.C.E” Draft manual Jan. 25, 2005 FCC Warning
TransitionDiagram.doc Page 2 THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. Note This equipment has been tested and found to comply with Part 15 of the FCC Rules. These rules are designed to provide reasonable protection against harmful interference. This equipment may cause harmful interference to radio communications if it is not installed and used in accordance with these instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and Sirius Receiver. • Connect the equipment into an outlet on a circuit different from that to which the Sirius Receiver is connected • Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
TransitionDiagram.doc Page 3 Brief Operation Manual for Clarion Transportable Navigation 1. Turn On/ Off Power On/Off
TransitionDiagram.doc Page 4 2. Main Menu Please press screen button which you want to select.
TransitionDiagram.doc Page 5 3. Music mode Press Music Player ICON on main menu Keys on Touch Screen Play Device FolderPlay ModeMain Play / Pause Stop Previous Music Next Music Mute Volume Up Volume Down Previous Screen Next Screen
TransitionDiagram.doc Page 6 1) Select Play Device <Music in Hard Disk> <Music in USB Memory> 2) Select Folder <Before Folder Change> <After Folder Change> Hard Disk USB MemoryFolderFolder
TransitionDiagram.doc Page 7 3) Select Play Mode <Play Musics one time> <Play a Music reapeatly> <Play Musics in a Folder repeatly> <Play Musics randomly> Normal RepeatFolder Repeat Random
TransitionDiagram.doc Page 8 4. Sirius mode (Key Functions and Screen Description) Press SIRIUS ICON on main menu Keys on Touch Screen Number Key 1 ~ 0 (Preset recall, save, Direct Tune) Channel Up/ Down Category Up/ Down Volume Up/ Down MuteMenu Display
TransitionDiagram.doc Page 9 1) Default Mode – Channel Tune Mode Channel Number (1~223) Antenna Signal 0~3 Channel Name Tune Mode (Channel, Preset) Band & Preset Category Name PDT (Artist, Composer and Song Title) will be displayed through two lines Volume
TransitionDiagram.doc Page 10 Action Function Press MENU Enters the user's setting menu Press CH+ Channel up Press CH- Channel down Press CAT+ Press CAT- Enters the category list mode Press Tune Mode Makes a direct tuning dialogue and confirms input to tune Press Number 1~0 Jumps to a preset channel Press-and-hold Number 1~0 Presets a current channel to the pressed number Press MENU Enters the user's setting menu Press BAND Changes a preset band among A, B or C. Press-and-hold BAND Enters the preset tuning mode. Press DISP Toggles the LCD display (no changes in this product) Press-and-hold DISP Enters the channel list mode Press MEMO Memorizes the artist name and song title of the current channel. Press-and-hold MEMO Enters the memo recall list mode 2) Default Mode – Preset Tune Mode Action Function Press MENU Enters the user's setting menu Press CH+ Preset channel up Press CH- Preset channel down Press-and-hold DISP Enters the preset channel list mode
TransitionDiagram.doc Page 11 3) Channel List Mode, Preset Channel List Mode, Category List Mode <Channel List Mode> Action Function Press MENU Enters the user's setting menu Press CH+ Scrolls channel up in the current category. Press CH- Scrolls channel down in the current category. Press ITEM Tunes to the selected channel. Press DISP Changes the way how to show channels among in channel name, artist name or song-title. Channel List Items
TransitionDiagram.doc Page 12 4) Menu Mode (Main Menu Screen) Action Function Press MENU Returns to default mode Press ITEMS Enters each sub-menus. Items
TransitionDiagram.doc Page 13 4-1 Sub Menu Screen <SID – Sirius ID> <Lock or Unlock> <Edit Code> <Antenna Aiming – satellite, terrestrial>
TransitionDiagram.doc Page 14 <Memory Option> <Factory Default>
TransitionDiagram.doc Page 15 4-2 Sub Menu Screen – Add or Skip List Mode Action Function Press MENU Returns the user's setting menu Press CH+ Scrolls channel up in the current category. Press CH- Scrolls channel down in the current category. Press ITEM Toggles a channel status to skip or lock Press DISP Changes the way how to show channels among in channel name, artist name or song-title. Items
TransitionDiagram.doc Page 16 5. Navigation with Sirius Mode 6. Navigation with Music Mode Sirius Channel InformationVolume Up Volume Down Previous Music Next Music Music Information
TransitionDiagram.doc Page 17 7. Photo Mode Press Photo ICON on main menu Keys on Touch Screen Full Screen Previous Screen Next Screen Slide ScreenMain Display Device
TransitionDiagram.doc Page 18 1) Select Display Device 2) Select Display Mode <Full Mode> <Slide Mode> Hard Disk USB Memory
TransitionDiagram.doc Page 19 8. Rear View and A/V Mode Press RearView ICON on main menu Keys on Touch Screen Will be displayed DVD input or rearview camera input DVD or Other A/V Input Rearview Camera Input
TransitionDiagram.doc Page 20 9. System Setup mode Please do not adjust this set up mode. Just press each icon and show. Press Setup ICON on main menu Keys on Touch Screen Software Upgrade LCD Brightness FM Transmitter Main
TransitionDiagram.doc Page 21 EG) < FM Transmitter Set-up> < LCD Brightness Set-up> < Software Upgrading Set-up>
TransitionDiagram.doc Page 22 Transition Diagram for Windows CE Navigation User Interface Menu
TransitionDiagram.doc Page 23 Start Menu Fig. 1 – Start Menu Fig. 1.1 – Start Route Guidance Fig. 1.2 – Edit Address Book SK1 SK2 SK3 SK4 SK5 SK6 Return to map mode Page up Return previous level Page down NA Accept SK1 SK2 SK3 SK4 SK5 SK6 See Sections 1.1.1, 1.1.2, 1.1.3, 1.1.4 and 1.1.5. See Sections 1.2.1, 1.2.2, 1.2.3 and 1.2.4. Fig. 1, 1.1, 1.2 and 1.3 use this soft key set. Page Down Page Up
TransitionDiagram.doc Page 24 Fig. 1.3 – Setup See Sections 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.4.1, 1.3.4.2, 1.3.4.3, 1.3.4.4, 1.3.4.5, 1.3.5, 1.3.5.1 and 1.3.5.2 Page Down Page Up
TransitionDiagram.doc Page 25 Section 1.1.1 - Destination->Address/Intersection Fig. 1.1.1.1 – State/Province Name Fig. 1.1.1 – Address/Intersection Fig. 1.1.1.2 – Postal Code Fig. 1.1.1.3 – City Name Fig. 1.1.1.4 – Street Name SK1 SK2 SK3 SK4 SK5 SK6 Return to map mode Page up Return previous level Page down Spell Accept See Fig. 1 for SK reference. Fig. 1.1.1, 1.1.1.1, 1.1.1.3 and 1.1.1.4 use this soft key set.
TransitionDiagram.doc Page 26 Section 1.1.2 - Destination->Point of Interest Fig. 1.1.2 – Point of Interest Fig. 1.1.2.1 – State/Province Name Fig. 1.1.2.2 – By Category Fig. 1.1.2.3 – By Postal Code Fig. 1.1.2.4 – By Phone Fig. 1.1.2.5 – By First Few Letters SK1 SK2 SK3 SK4 SK5 SK6 Return to map mode Page up Return previous level Page down Spell Accept See Fig. 1 for SK reference. Fig. 1.1.2, 1.1.2.1 and 1.1.2.2 use this soft key set. Page Down Page Up
TransitionDiagram.doc Page 27 Section 1.1.3 - Destination->Address Book Fig. 1.1.3 Section 1.1.4 - Destination ->Previous Destination (Most Recently Used Locations) Fig. 1.1.4 Section 1.1.5 - Destination->Map Fig. 1.1.5 SK1 SK2 SK3 SK4 SK5 SK6 Return to map mode Page up Return previous level Page down NA Accept See Fig. 1 for SK reference. Fig. 1.1.3 and 1.1.4 use the same set of soft key. SK1 SK2 SK3 SK4 SK5 SK6 Zoom In Zoom Out Return current vehicle position 2D, 2.5D and Split screen Accept cross point as new vehicle position Return current vehicle position See Fig. 1 for SK reference. Fig 1.1.5 uses this soft key set.
TransitionDiagram.doc Page 28 Section 1.2.1 - Edit Address Book->Add Previous Destination (Most Recently Used Locations) Fig. 1.2.1 Section 1.2.2 - Edit Address Book->Add Current Location Fig. 1.2.2 Section 1.2.3 - Edit Address Book->Edit Section 1.2.4 - Edit Address Book->Delete Fig. 1.2.3 Fig.1.2.4 SK1 SK2 SK3 SK4 SK5 SK6 Return to map mode Page up Return previous level Page down NA Accept See Fig. 1 for SK reference. Fig. 1.2.1, 1.2.3 and 1.2.4 use this soft key set.
TransitionDiagram.doc Page 29 Section 1.3.1 - Setup->Navigation Preferences (Preferences) Fig. 1.3.1 Section 1.3.2 - Setup->Display Options Fig. 1.3.2 Section 1.3.3 - Setup->Set Distance Units (Units) Section 1.3.4 - Setup->Set Origin Fig. 1.3.3 Fig. 1.3.4 Page Down Page Down Page Up Page Up SK1 SK2 SK3 SK4 SK5 SK6 Return to map mode Page up Return previous level Page down NA Accept See Fig. 1 for SK reference. Fig. 1.3.1, 1.3.2, 1.3.3 and 1.3.4 use the same set of soft key. Page Down Page Up
TransitionDiagram.doc Page 30 Section 1.3.4.1 - Setup->Set Origin->Address/Intersection Fig. 1.3.4.1.1 – State/Province Name Fig. 1.3.4.1 – Setup->Set Origin->Address/Intersection Fig. 1.3.4.1.2 – Postal Code Fig. 1.3.4.1.3 – City Name Fig. 1.3.4.1.4 – Street Name SK1 SK2 SK3 SK4 SK5 SK6 Return to map mode Page up Return previous level Page down Spell Accept See Fig. 1 for SK reference.
TransitionDiagram.doc Page 31 Section 1.3.4.2 - Setup->Set Origin->Point of Interest Fig. 1.3.4.2 – Setup->Set Origin->Point of Interest Fig. 1.3.4.2.1 – State / Province Name Fig. 1.3.4.2.2 – By Category Fig. 1.3.4.2.3 – By Postal Code Fig. 1.3.4.2.4 – By Phone Fig. 1.3.4.2.5 – By First Few Letters SK1 SK2 SK3 SK4 SK5 SK6 Return to map mode Page up Return previous level Page down Spell Accept See Fig. 1 for SK reference. Page Down Page Up
TransitionDiagram.doc Page 32 Section 1.3.4.3 - Setup->Set Origin->Address Book Fig. 1.3.4.3 Section 1.3.4.4 - Setup->Set Origin->Previous Destination (Most Recently Used Locations) Fig. 1.3.4.4 Section 1.3.4.5 - Setup->Set Origin->Map Fig. 1.3.4.5 SK1 SK2 SK3 SK4 SK5 SK6 Return to map mode Page up Return previous level Page down NA Accept See Fig. 1 for SK reference. Fig. 1.3.4.3 and 1.3.4.4 use this soft key set. SK1 SK2 SK3 SK4 SK5 SK6 Zoom In Zoom Out Return current VP 2D, 2.5D and Split screen Accept cross point as new VP. Return current VP See Fig. 1 for SK reference. Fig 1.3.4.5 uses this soft key set.
TransitionDiagram.doc Page 33 Section 1.3.5 - Setup->System Diagnostics (Diagnostic) Fig. 1.3.5 Section 1.3.5.1 - Setup->System Diagnostics->GPS Diagnostics Fig. 1.3.5.1 Section 1.3.5.2 - Setup->System Diagnostics-> System Information Fig. 1.3.5.2 SK 1 SK2 SK3 SK4 SK5 SK6 Return to map mode NA Return previous level NA NA Accept See Fig. 1 for SK reference. Fig. 1.3.5 uses this soft key set. SK1 SK2 SK3 SK4 SK5 SK6 NA NA NA NA NA Return previous level See Fig. 1 for SK reference. Fig. 1.3.5.1 uses this soft key set. SK1 SK2 SK3 SK4 SK5 SK6 NA NA NA NA NA Accept SK1 SK2 SK3 SK4 SK5 SK6 See Fig. 1 for SK reference. Fig 1.3.5.2 uses this soft key

Navigation menu