Ki Ryung Electronics XTR3G3S Digital Satellite Radio User Manual BXTR3C Manual

Ki Ryung Electronics Co., Ltd. Digital Satellite Radio BXTR3C Manual

UserManual.wiki >

Ki Ryung Electronics >

XTR3G3S User Manual

Users Manual

InstructionManualModel BXTR3CKCTo activate your XACT Visor SIRIUS Satellite Radio Receiver or for latest news andquestions regarding SIRIUS Satellite Radio service visit www.siriuscanada.ca or call 1-888-539-SIRIUS (7474).For accessory & product information visit us at www.getxact.com.

KEEP MOVING

SAFETY PRECAUTIONSWarningFollow these notifications to avoid any traffic accidents or personal injury:1. Installation must be performed according to this user guide.2. Do not install the device where it may obstruct your view through the windshield or of your vehicle’sindicator displays.3. Do not install the device where it may hinder the function of safety devices such as an airbag. Doing somay prevent the airbag from functioning properly in the event of an accident.4. The installation and usage suggestions contained in this user guide are subject to any restrictions orlimitations that may be imposed by applicable law. The purchaser should check applicable law for anyrestrictions or limitations before installing and/or operating this device.5. Failure to follow these safety instructions and warnings may result in a severe accident.DangerBe aware of the following precautions to prevent fire and avoid personal injury:1. To avoid short circuits, never put or leave any metallic objects (coins, tools, etc.) inside the device.2. If the device emits smoke or strange smells, turn the power off immediately and contact your dealer.3. Do not drop the device or subject it to strong impacts or mechanical shocks.4. If the LCD display becomes damaged or broken, do not touch the liquid crystal fluid. The fluid may bedangerous to your health or even fatal. If the liquid crystal fluid contacts your body or clothing, immediatelywash it off with soap and water.CautionDo not operate this device in a way that might divert your attention from driving safely. As a driver, you areresponsible for safely operating your vehicle in accordance with traffic safety laws at all times.

TABLE OF CONTENTSIntroduction Page 3Product Overview Page 3Package Contents Page 3Components Guide Page 4XACT Visor SIRIUS Satellite Radio Receiver Page 4Wireless Remote Control Page 5Getting Started Page 6Mounting Your XACT Visor SIRIUS Satellite Radio Receiver at Home Page 6 Mounting Your XACT Visor SIRIUS Satellite Radio Receiver in a Vehicle Page 6Activating Your SIRIUS Subscription Page 7Make Note of Your Identification Number Page 7Using The Vehicle Kit Page 8Mounting to the Dashboard or Console Page 8Mounting to the Windshield Page 9Mounting to the Sunvisor Page 10If you Have Purchased the Home Kit Page 11Mounting in your Home Page 11Basic Operations Page 12Tuning Power On/Off Page 12Changing the Way the Display Shows Channel #, Artist Name and Song Title Page 13Artist/Song Page 13Artist Page 13Song Title Page 14Flip Display Page 14Tuning to Different Entertainment Categories Page 14Tuning to Different Channels in a Selected Category Page 14Direct Tuning (Remote Only) Page 15Presetting Channels Page 15Selecting One of the Preset Channels Page 16Preset Tuning Mode Page 16Menu Options Settings Page 17Basic Setting Procedure Page 17SIRIUS ID Page 17Display Settings Page 18Brightness Control Page 18Flip Display Page 19Contrast Control Page 191

TABLE OF CONTENTSFactory Default Page 20Auto Shutoff Page 21Parental Block Page 23Edit Code Page 23Unblock Channel Page 24Block Channel Page 25FM Transmitter Page 26Display Messages Page 27Acquiring Signal Page 27No Antenna Page 27Updating Channels Page 27Subscription Updated Page 27Mute Page 28UnMute Page 28Clearing Page 28Problem Solving Page 29Warranty Page 302

3INTRODUCTIONProduct OverviewThank you for purchasing this product! Your new plug and play XACT Visor SIRIUS Satellite Radio isspecifically designed to mount in a vehicle or indoor/outdoor location.Package ContentsCarefully unpack your kit and ensure that you have the following items.•XACT Visor SIRIUS Satellite Radio Receiver•Wireless Remote Control•CR2025 Battery (for the Wireless Remote Control)•Vehicle Mounting Bracket (Windshield / Dashboard / Visor Mount)•Vehicle Antenna•12v Vehicle Adapter•User’s GuideIn the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer.Your XACT Visor SIRIUS Satellite Radio Receiver must be used in conjunction with any one of the followingXact Kits, such as the Universal kit, Home kit or Boom Box as required by your specific needs.•Xact Vehicle Kit: Model Number XS051C•Xact Home Kit: Model Number XS052CThe easiest way to activate your XACT Visor SIRIUS Satellite Radio Receiver is to call 1-888-539-SIRIUS (7474). 3

4COMPONENTS GUIDE4XACT Visor SIRIUS Satellite Radio Receiver1. Power Button2. BAND 3. DISPLAY4. LCD Monitor (Main Display)5. Numerical Keys6. IR for Remote Control7. Channel Up/Down Rotary Dial, Select Button (By pressing dial inward)8. MENU Options List9. CATEGORY Button10. Audio Jack11. FM Out Jack12. DC Power Jack13. Antenna Jack

5COMPONENTS GUIDE5Wireless Remote ControlThe wireless remote control packed with your plug and play XACT Visor SIRIUS Satellite Radio mirrors theoperations of your plug and play XACT Visor SIRIUS Satellite Radio Receiver from a remote location.1. Power Button2. CH (Channel) (Ascend/Descend Buttons)3. MENU Options List4. MUTE5. BAND6. DISP (Display) 7. PREV (Previous Channel)8. DIR (Direct Input)9. Numerical Keys10. SELECT (OK Button)11. CAT (Category) (Left/Right Directional Buttons)

6GETTING STARTEDMounting Your XACT Visor SIRIUS Satellite Radio at HomeFind an appropriate location near your stereo receiver to install your plug and play XACT Visor SatelliteRadio Receiver.Mounting Your XACT Visor SIRIUS Satellite Radio in a VehicleFind an accessible location in your vehicle to install your plug and play XACT Visor SIRIUS Satellite RadioReceiver; usually, this is the dashboard. You mat also mount the receiver to the vehicles sun Visor.Do not mount your device where it may obstruct your view through the windshield or your view of yourvehicle’s indicator displays.Do not mount your device where it may impede your access to the vehicle’s controls.Do not mount your device where it may hinder the function of safety devices, such as an airbag. Doingso may prevent the airbag from functioning accordingly in the event of an accident.Mount your SIRIUS Satellite Radio where it can be easily reached.The device must be directly in line-of-sight of the remote controller.If you're not going to operate your vehicle for an extended period of time (e.g. parking garage while on vacation) unplug your XACT Visor SIRIUS Satellite Radio Receiver from the the cigarette lighter adapter. NOTE! Do not modify or alter in any way the wires or connections especially to the 12v vehicle adapter. Doingso will prevent the protection provided in the circuitry from functioning properly and result in damagingyour receiver. This will void your warranty.6

7Activating Your SIRIUS SubscriptionBefore beginning to use your new device, you must first register to the SIRIUS Satellite Radio service.To activate your Sirius Satellite Radio Service call SIRIUS at 1-888-539-7474. A representative will help you activate your unit.Note: Make sure to have your ESN or SID number accessible when calling SIRIUS.Make Note of Your Identification NumberActivating your SIRIUS Satellite Radio Service:1. Press the MENU button to enter the Menu Options settings.2. Rotate the Channel Up/Down Rotary Dial until SIRIUS ID is displayed and press the Select button inward to enter the sub menu. Your own device’s 12-digit SIRIUS ID Number (ESN) will be displayed on the screen.7

Mounting to the Dashboard or ConsoleNOTE! Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v VehicleAdapter that is provided with the kit. It is important that you do not modify it in any way since this will resultin damaging your equipment and void the warranty.If using the AMPs mounting holes to fasten the Visor Vehicle Mount to your vehicle, Bolt or screw the VisorVehicle Mount in place and proceed to step 3.1. Remove the protective film from one side of the supplied double sided 3M tape. Press firmly to secure the tape to thebottom of the Visor Vehicle Mount. (figure 1). 2. Remove the protective filmfrom the remaining side of the double sided 3M tape.Place the mount in the appropriate location on the vehicle’s dash or console and press firmly. (figure 2). 3. Slide the XACT Visor Satellite Radio Receiver onto the mounting tab of the Visor Vehicle Mount until it locks into place. (figure 3). To remove the XACT Visor SIRIUS Satellite Radio Receiver, push the locking tabon the bottom of the Visor inward and slide forward.4. Connect the DC Power, antenna and audio (if required) to the appropriate jacks. (figure 4). USING THE VEHICLE KIT8INSTALLATION1. 2.3. 4.

Mounting to the WindshieldNOTE! Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v VehicleAdapter that is provided with the kit. It is important that you do not modify it in any way since this will resultin damaging your equipment and void the warranty.1. Insert the 4 suction cups into the larger side of the holes on the Visor Vehicle Mounting Bracket and slide outward to lock in place. (figure 1). 2. Loosen the thumb screw androtate the Visor Mounting tab to the appropriate angle for your vehicle’s windshield. Tighten the thumb screw. (figure 2). 3. Slide the XACT Visor SIRIUS Satellite Radio Receiver onto the mounting tab of the Visor Vehicle Mount until it locks into place.(figure 3). To remove the XACT Visor SIRIUS Satellite Radio Receiver, push the locking tab on the bottom of the Visor inward and slide forward.4. Place the suction cups on theVisor Vehicle Mount in an appropriate location on your windshield. Press firmly to secure the Visor in place. (figure 4). 5. Connect the DC Power, antenna and audio (if required) to the appropriate jacks. (figure 5). 9INSTALLATION1.2.4.3.5.

Mounting to the SunvisorNOTE! Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v VehicleAdapter that is provided with the kit. It is important that you do not modify it in any way since this will resultin damaging your equipment and void the warranty.1. Slide the XACT Visor SIRIUS Satellite Radio Receiver onto the mounting tab of the Visor Vehicle Mount until it locks into place. (figure 1). To remove the XACT Visor SIRIUS Satellite Radio Receiver, push the locking tab on the bottom of the Visor inward and slide forward.2. Loosen the thumb screw andslide the Visor Mount between the sunvisor and the vehicle’s headliner. (figure 2). 3. Push the XACT Visor SIRIUS Satellite Radio Receiver up so it is flush withthe bottom of the sunvisor and tighten the thumb screw.(figure 3). 4. Connect the DC Power, antenna and audio (if required) to the appropriate jacks. (figure 4). Note: Hardwiring is recommended. Care should be taken to ensure no obstruction of view, controls or safety equipment. 10INSTALLATION3.1.2.4.

11IF YOU HAVE PURCHASED THEHOME KITMounting in your HomeNOTE! Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v VehicleAdapter that is provided with the kit. It is important that you do not modify it in any way since this will resultin damaging your equipment and void the warranty.1. Slide the XACT Visor SIRIUS Satellite Radio Receiver onto the mounting tab of the Visor Home Mount until it locks into place. (figure 1). To remove the XACT Visor SIRIUS Satellite Radio Receiver, push the locking tab on the bottom of the XACT Visor SIRIUS Satellite Radio Receiver inward and slide forward.2. Place the Visor Home Mountin an appropriate location on a table, desk, shelf, etc...(figure 2). 3. Connect the DC Power, antenna and audio (if required) to the appropriate jacks. (figure 3). INSTALLATION1.2.3.

BASIC OPERATIONSTurning Power On/OffThe XACT Visor SIRIUS Satellite Radio Receiver can be powered on/off from the power button on the unit orthe remote control.Press the Power Button to turn the XACT Visor SIRIUS Satellite Radio Receiver on. When the XACT VisorSIRIUS Satellite Radio Receiver powers on, the display will read "SIRIUS" for 3 seconds.Press the Power Button to turn the XACT Visor SIRIUS Satellite Radio Receiver on. When the XACT VisorSIRIUS Satellite Radio Receiver powers off, the display will read "XACT" for 3 seconds.After your SIRIUS subscription is activated, the Normal (default) Operation screen will appear.12

Changing the Way the Display shows Channel #, Artist Name and Song TitleWhen powered on for the first time on the XACT Visor SIRIUS Satellite Radio Receiver, the display will showthe Channel #, Artist Name and Song Title.Note: The Channel Name will scroll for 10 seconds along with your selected display option when tuning to a new channel.The display options can be accessed by pressing the DISPLAY button on the XACT Visor SIRIUS SatelliteRadio Receiver or on the remote control. Note: The XACT Visor SIRIUS Satellite Radio Receiver will resume the previously selected display option when powered off. The default display option is Channel #, Artist Name, and Song Title.The following options can be made:•Artist/Song•Artist•Song Title•Flip DisplayArtist/SongPress the DISPLAY button on the XACT Visor SIRIUS Satellite Radio Receiver until Artist/Song is displayed.The Channel # you are currently on, Artist Name and Song Title will scroll on the display.ArtistPress the DISPLAY button on the XACT Visor SIRIUS Satellite Radio Receiver until Artist is displayed. TheChannel # you are currently on and Artist Name will scroll on the display.13

14BASIC OPERATIONS14Song TitlePress the DISPLAY button on the XACT Visor SIRIUS Satellite Radio Receiver until Song Title is displayed.The Channel # you are currently on and Song Title will scroll on the display.Note: If display information is longer than 16 characters, the display will pause for 2 seconds after the first 16 characters are shown, then scroll the remaining characters.Flip DisplayHolding the DISPLAY button on the XACT Visor SIRIUS Satellite Radio Receiver for 2 seconds will flip the display.Tuning to Different Entertainment Categories1. Press the CATEGORY button to scroll through music and entertainment categories. Each press of the CATEGORY button advances to the next category. Press the Select button inward when the desired category is reached. Tuning to Different Channels in the Selected Category2. Once you have chosen the desired category, rotate the Channel Up/Down Rotary Dial clockwise or counter clockwise until the desired channel is displayed. Press the Select button inward to tune to the desired channel.Note: If the category or channel is not selected within 5 seconds, the XACT Visor SIRIUS Satellite Radio Receiver reverts to normal tuning mode.

15Direct Tuning (Remote Only)Your XACT Visor SIRIUS Satellite Radio enables you to tune to a selected channel directly. This feature isonly available through the Remote Control.1. Press the DIR button on the Remote Control to activate the Direct Tuning mode.2. The corresponding window is displayed and asks you to enter the desired channel number (3 digits).3. The XACT Visor SIRIUS Satellite Radio Receiver will be tuned to your selected channel..Presetting Channels Your XACT Visor SIRIUS Satellite Radio Receiver allows you to preset 36 channels. This design enables youto directly select between 6 different bands of preset channels (identified as A, B, C, D, E and F). Each bandcontains 6 specific channels (indicated as A-1, A-2, A-3....F-4, F-5 and F-6).1. Tune to the channel you wish to store.2. Press the BAND button to switch to your desired band (A-F) according to your preference.3. Once the desired band is set, press and hold the 1, 2, 3, 4, 5, or 6 numerical buttons to store the specific channel. The Channel will now be recorded in memory.Note: If a channel is already recorded into a preset, the new channel will overwrite the old one.15

Selecting One of the Preset Channels 1. Press the BAND button until the desired band (A-F) is displayed.2. Press the desired numerical button (1, 2, 3, 4, 5 or 6) a confirmation will display.If the desired band and number is press and does not have a channel stored Preset Empty will be displayed.Preset Tuning Mode Pressing the BAND button for 2 seconds will activate/deactivate the "Preset Tuning Mode" feature.Using the Rotary Channel Dial, you will now scroll only through channels that have been preset using the 1-6preset buttons in Bands A-F.Pressing the BAND button again for 2 seconds returns the XACT Visor SIRIUS Satellite Radio Receiver tonormal tuning mode.Note: When "Preset Tuning Mode" is activated, the first preset in the current Band will be automatically tuned. If you are already tuned to a preset channel, it will continue playing.16

17•SIRIUS ID•Display•Factory Default•Auto Shutoff•Parental Block•FM TransmitterBASIC SETTING PROCEDURE1. Press the MENU button.2. Rotate the Channel Up/Down Rotary Dial to select a desired menu option.3. Press the Select button to enter into the selected menu option.4. Set the menu option to your preference according to the steps described below.5. To exit the menu option, press the MENU button.SIRIUS ID1. Press the MENU button to enter the Menu Options settings.MENU OPTIONS SETTINGSThe following options are included on the Menu Options list:17

18182. Rotate the Channel Up/Down Rotary Dial until SIRIUS ID is displayed and press the Select button inward to enter the sub menu. Your own device’s 12-digit SIRIUS ID Number (ESN) will be displayed on the screen.Display Settings1. Press the MENU button to enter the Menu Options settings.2. Rotate the Channel Up/Down Rotary Dial until Display is shown and press the Select button inward to enter the sub menu. The following options can be selected:•Brightness Control•Flip Display•Contrast ControlBrightness Control1. Press the Select button to enter Brightness control.

192. A 10-segment horizontal bar graph is displayed. Rotate the Channel Up/Down Rotary Dial to adjust the dimming control function accordingly. Press the Select button to confirm the setting. Flip Display:1. Press the Select button to enter Flip Display.2. Press the Select button to flip the screen upside down so that you may mount the unit on your vehicle’s visor.Note: You may also flip the display by pressing and holding the DISPLAY button on the XACTVisor SIRIUS Satellite Radio Receiver or the Remote Control for 2 seconds.Contrast Control:1. Press the Select button to enter Contrast control.

202. A 10-segment horizontal bar graph is displayed. Rotate the Channel Up/Down Rotary Dial to adjust the contrast control function accordingly. Press the Select button to confirm the setting. Factory DefaultThe XACT Visor SIRIUS Satellite Radio Receiver can be reset.1. Press the MENU button to enter the Menu Options settings.2. Rotate the Channel Up/Down Rotary Dial until Factory Default is displayed and press the Select button inward to enter the sub menu. 3. Rotate the Channel Up/Down Rotary Dial until “Y” is selected press the Select button to continue.4. Rotate the Channel Up/Down Rotary Dial until “Y” is selected press the Select button to confirm.Note: “Clearing” will display on the screen while performing Factory Default reset.

21Items revert to their original factory settings as follows:All Presets revert to emptyDisplay Dimming to 80%Flip Display to “Normal”Display Contrast to 100%FM Transmitter to “On” FM Channel 88.1Channel is Tuned to Channel 184Auto Shutdown “Off”Lock Code Remains “Set”Blocked channels remain BlockAuto ShutoffYour XACT Visor SIRIUS Satellite Radio Receiver will automatically turn off after an hour of inactivity. Thisfeature is used when the vehicles cigarette lighter remains powered with the key off. Your XACT Visor SIRIUSSatellite Radio Receiver will power off even if you leave it powered on, conserving your vehicles battery.Pressing any button on the XACT Visor SIRIUS Satellite Radio Receiver or Remote Control will reset the AutoShutoff feature.1. Press the MENU button to enter the Menu Options settings.2. Rotate the Channel Up/Down Rotary Dial until Auto Shutoff is displayed and press the Select button inward to enter the sub menu.

3. Rotate the Channel Up/Down Rotary Dial until “Y” is selected press the Select button to confirm.4. Rotate the Channel Up/Down Rotary Dial until “N” is selected press the Select button to confirm.One minute prior to the Auto Shutoff feature, the display will flash the message Shut Off?Pressing any button or turning the Channel Up/Down Rotary Dial will defeat the Auto Shutoff feature.22

23Parental BlockAccess to particular channels can be set with a 3 digit code. When you attempt to tune to these particularchannels, your receiver will require you to enter the access passcode.1. Press the MENU button to enter the Menu Options settings.2. Rotate the Channel Up/Down Rotary Dial until Parental Block is displayed and press the Select button inward to enter the sub menu. The following options can be selected:•Edit Code (Default Code “000”)•Unblock Channel•Block ChannelEdit Code1. Rotate the Channel Up/Down Rotary Dial to scroll to Edit Code and press the Select button inward to enter Edit Code.2. Rotate the Channel Up/Down Rotary Dial to scroll through numbers 0-9 until the first digit of your code is reached. Press the Select button inward to enter the number and move to the next digit.

243. Entering your new code. Rotate the Channel Up/Down Rotary Dial to scroll through numbers 0-9 until the first digit of your new code is reached. Press the Select button inward to enter the number and move to thenext digit.4. Confirm your new code. Rotate the Channel Up/Down Rotary Dial to scroll through numbers 0-9 until the first digit of your new code is reached. Press the Select button inward to enter the number and move to thenext digit.Note: The XACT Visor SIRIUS Satellite Radio Receiver will revert to the default screen if a digit is not selected within 10 seconds.Unblock Channel1. Rotate the Channel Up/Down Rotary Dial to scroll to Unblock and press the Select button inward to enter channel Unblock.2. Rotate the Channel Up/Down Rotary Dial to scroll through numbers 0-9 until the first digit of your code is reached. Press the Select button inward to enter the number and move to the next digit.3. Rotate the Channel Up/Down Rotary Dial to scroll to the channel you wish to unblock.

4. Press the Select button to unblock the channel. Note: The XACT Visor SIRIUS Satellite Radio Receiver will revert to the default screen if a digit is not selected within 10 seconds.Block Channel1. Rotate the Channel Up/Down Rotary Dial to scroll to Block and press the Select button inward to enter channel Block.2. Rotate the Channel Up/Down Rotary Dial to scroll through numbers 0-9 until the first digit of your code is reached. Press the Select button inward to enter the number and move to the next digit.3. Rotate the Channel Up/Down Rotary Dial to scroll to the channel you wish to block.4. Press the Select button to block. Note: The XACT Visor SIRIUS Satellite Radio Receiver will revert to the default screen if a digit is not selected within 10 seconds.25

26FM Transmitter The FM Transmitter allows your XACT Visor SIRIUS Satellite Radio Receiver to transmit music to your car orhome FM radio. 1. Press the MENU button to enter the Menu Options settings.2. Rotate the Channel Up/Down Rotary Dial until FM Transmitter is displayed and press the Select button inward to enter the sub menu. 3. Rotate the Channel Up/Down Rotary Dial until “On” is selected press the Select button to continue.4. Rotate the Channel Up/Down Rotary Dial until an FM Channel that is not being used by an FM Broadcasterin your area is displayed. Press the Select Button to set the FM Channel.26

27DISPLAY MESSAGESAcquiring SignalWhen the audio signal is lost, the flashing message “Acquiring Signal” is displayed until the signal isrecovered.No AntennaWhen no antenna is detected and the signal is lost, the flashing message “No Antenna” is displayed until anantenna is detected and the signal is acquired.Updating ChannelsWhen a channel or category update from the SIRIUS broadcast system is detected, “Updating Chs X%” isdisplayed until the update is complete.Subscription UpdatedWhen a subscription update from the SIRIUS broadcast system is detected, “Subscription updated press anykey to continue” will scroll until you press any button.27

28MuteA single press of the “Mute” button on the Remote Control (see diagram on page 5 for the location of thebutton) will disable all audio from your device. The Message Muted will flash on the display until the audio isrestored.UnMuteA single press of the “Mute” button on the Remote Control (see diagram on page 5 for the location of thebutton) while muted will restore the audio from your device. ClearingWhen performing Factory Default the flashing message “Clearing” is displayed until the reset is complete.28

29PROBLEM SOLVINGProblem Solving SectionFor your assistance, we have listed a few common problems below.The XACT Visor SIRIUS Satellite Radio Receiver does not work. Please check the Power Cables. Make sure you have contacted SIRIUS to activate your SIRIUS SatelliteRadio subscription 1-888-539-SIRIUS (7474).I have no sound from my XACT Visor SIRIUS Satellite Radio Receiver. Check the audio cables and make sure they are plugged in correctly.Check the FM Transmitter Setting and make sure that your FM radio is set to the correct channel.The LCD displays Acquiring Signal.When the audio signal is lost the flashing message “Acquiring Signal” is displayed until the signal isrecovered.The LCD Displays No Antenna.When no antenna is detected and the signal is lost, the flashing message “No Antenna” is displayed until anantenna is detected and the signal is acquired.Reception is weak or the audio has static and is unclear.Change the location of the Antenna making sure it is away from obstructions.29

30WARRANTYWarranty InformationXACT CommunicationOne-Year Limited WarrantyThis limited warranty sets forth all XACT Communication responsibilities regarding your product. There are noother expressed or implied warranties from XACT Communication.Warranty Service ProvidedIf you purchased the product new from a retail vendor, XACT Communication warrants the equipment againstdefects in material and workmanship for a period of one (1) year from the original date of purchase. Thiswarranty is in lieu of all other expressed warranties. This warranty begins when you purchase the product andcontinues for one (1) year unless you sell or rent the unit, in which case the warranty stops.XACT Communication disclaims any implied warranty, including the warranty of merchantability and thewarranty of fitness for a particular purpose, as of the date of one year from your original purchase of the productXACT Communication assumes no responsibility for any special, incidental, or consequential damages.This warranty gives you specific legal rights and you may have other rights which vary from state to state.Some states do not allow the exclusion or limitations of special, incidental, or consequential damages orlimitations on how long a warranty lasts, so the above exclusion or limitation may not apply to you.Warranty Service Not ProvidedThis warranty does not cover damage resulting from accident, misuse, abuse, improper installation oroperation, lack of reasonable care, unauthorized modification, or the affixing of any attachment not providedby XACT Communication with the equipment, and/or loss of parts. This warranty is voided in the event anyunauthorized person opens, alters, or repairs the product.All XACT Communication equipment being returned for repair must be suitably packaged.

31WARRANTYWhat To Do for Warranty ServiceDuring the first thirty (30) days, a defective product is eligible for over-the-counter exchange at the retailer fromwhom it was purchased. After thirty (30) days, the defective product should be returned to the authorizedservice center. Please allow a minimum of 2-3 weeks for the return of your product. For the shippingaddress of the authorized service center, call one of the telephone numbers given below.Your product will be repaired or replaced if examination by the service center determines the product is defective.Products received damaged as a result of shipping will require you to file a claim with the carrier prior torepair. A product received with missing parts or with damage due to abuse, inadequate packing or some othernoncompliance with this limited warranty will be returned to you C.O.D., freight collect.NOTE: A product received which was not made by XACT Communication or which is not defective asdetermined by our test procedures will not be repaired and will be returned to you C.O.D., freight collect.To Obtain Warranty Service• Provide proof of the date of purchase within the package.• Prepay all shipping costs to the authorized service center.• Include a return shipping address within the package.Please retain your sales receipt, the carton, the packing materials, and the printed material. The originalcarton is the best shipping container for the Product should you have to return it.For your reference:Model Number______________________________ SID/ESN Number_________________________S/N Number_______________________________ Date of Purchase__________________________Name of Dealer_____________________________XACT Communication Customer Service Telephone Number:1-212-481-7950INSIDE THE U.S.A.: 1-866-466-XACT (9228)Visit Us on the Web: www.getxact.com31

Call 1-212-481-7950or Visit our Website:www.getxact.comTo activate your XACT Visor SIRIUS Satellite Radio Receiver or forlatest news and questions regarding SIRIUS Satellite Radio service visitwww.siriuscanada.ca or call 1-888-539-SIRIUS (7474).

Navigation menu