Kiddesigns HW288 Cordless Video Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	348683
Application ID	PeMCq01COz6AodNASL87ew==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.84kB (172948 bits)
Date Submitted	2003-08-15 00:00:00
Date Available	2003-08-15 00:00:00
Creation Date	2003-07-23 16:17:21
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual
Document Creator	HP 9100C Digital Sender
Document Author:	ITS ELECTRIC TOY

MODEL HW-288
CAUTION-ELECTRICAL” OPERATED PRODUCT
NOT RECOMMENDED FOR CHILDREN UNDER 3 YEARS OF AGE.
AS WITH ALL ELECTRIC PRODUCTS, PRECAUTIONS SHOULD
BE OBSERVED DURING HANDLING AND USE TO PREVENT
ELECTRIC SHOCK. AC 120V, 60Hz 8 WATTS UL LISTED.
HW-288 is a high quallty’s 2.4GHz cordless video camera system, got the most life
Iike’s image and clarity sounds. The transmission range is up to 10 meter (depend on
environment) so you can take Image all around your house freely.
FCC Warnrn
n‘udwicewwlluwim mrsomurccmrssopaatrmemmwmmmmmmmnmemwmmmmr
Intefterence, and (2) this device must accept any Intertarenoe received. homing interval-once mat may emu undesired operation.
wremlsequipmemnasbemmmmumrdmcomwwmr the imflswaclm Mammawmimmrs MIMFCC Rules
these limits as cesium to wmrmmin mm comet hermit! Warm mammal lnsulafim this ailment genomes.
MariammdhinrmdbnequencymgymdjmtmledammdhwcmwmhImmmmnflulhtmmnu
in radio ecumenicam However. Ihere is no guarantee that interlerance will notm In a partials retaliation. it this equipment does
mwmrmmmwmwmlwis‘mrecqnmwhicncanbedemmnynmngmmmmhrmnwwrsmmefl
wiry incorrectthemtertarm bysneorrmreolihe lollrming measure:
- Nutrient or relocate the receiving antenna.
- mm the sewatiun mm the equipnmtam receiver,
- Correct rm aminmmtintnm mm a drcult ditterenttrom Itat tnwhleh the receiver is outmoded.
- wmmwmmemmmwmmmmn
cm: Mass or ruminations not amnesty approved by the party responstrle tor the compliance could void the user's authority to
operate the equipment
Gettin - Started
Camera
Batteg Installation
1. Unscrew the battery door by screwdriver.
2, Remove me battery door and insert 6 “"AA batteries, checking the + and — ends at the batteries.
3. Close the battery door and screw it back.
We recommend
- Do not mix old and new batteries.
0 Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
- Removing batteries it unit is not used for more than 30 days.
Base Unit
B k e Installation
The backup battery is to keep the universal remote control setting during AC power failure occurs or
the AC adaptor is accidentally disconnected.
1. Unscrew the battery door by screwdriver.
2. Remove the battery door and insert 2 “AAA“ batteries, checking the + and — ends of the batteries,
3. Close the battery door and screw it back.
We recommend
0 Do not mix old and new batteries.
. Do not mix alkaline. standard (carbonvzinc) or rechargeable (nickel-cadmium) batteries.
- Removing batteries it unit is not used for more than 30 days.
P w r nn i n
Important: Please use the power adaptor (DC 6V 500mA) came with the unit only.
1. Plug in the power adaptor came with the unit to the wall outlet and the base unit.
2. Turn on the base unit by switching the POWER ON/OFF switch to ON. The green LED on the
base unit will be turned on.
Hooking to T
NOTE: If you want to record image to videotape. you must connect HW—288 to VCR. But if you just
want transmit image to TV, you can just connect HW—288 to TVonIy.
Tum oft both your TV and the HW-28I3 base unit.
Connect the yellow plug to your TV's VIDEO IN jack and the white plug to AUDIO IN.
To check the connection, please turn on your TV and both BE—278 base and camera. Switch TV to
LINE IN mode than you should see picture capturing by the camera.
P’N.‘
Hookin to VCR
NOTE: Please make sure the connection between your TV and VCR is working properly belore install
the HW~288.
1. Turn off your TV, VCR and the HW-288 base unit.
2. Connect the yellow plug to your VCR's VIDEO IN jack and the white plug to AUDIO IN.
3 To check the connection, please turn on your TV. VCR and both HW-288 base and camera.
Switch both TV and VCR to LINE IN mode and than you should see picture capturing by the
camera.
Recording your ow eo
Tum on the VCR, HW-288 base unit and the camera. The green LEDs on the base and camera
will be turned on, Put in a blank videotape into your VCR.
To start recording, press the REC button on the camera. The red LEDs both in the front and back
on the camera will be turned on to indicate it is recording.
To pause it, just press the PAUSE button which locate in the center of POWER ONIOFF Switch.
The red LEDs will become flashing.
4. To continue the recording, just press the PAUSE button again.
5. Alter complete recording. just presses the STOP button on the camera then turn it off.
N TE: Depending on the brand of VCR you are usingI it may have difference operation for pause and
re-recoding operation. Please read your VCR operation manual carefully and follow steps base on it.
9’ N
Play your Video
1. You can also access your VCR by using VCR keys on the camera so you don't need to walk back
and lorth.
Accessories
Tri port — For you to fix the camera so you can take your picture by yoursell.
Maintenance
Clea g the Cabinet
Take cares to keep the unit clean and dry. You may clean the cabinet with mild soap and water.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 3
Creator                         : HP 9100C Digital Sender
Create Date                     : 2003:07:23 16:17:21
Author                          : ITS ELECTRIC TOY
Producer                        : 
Title                           : 
Subject                         : manual

EXIF Metadata provided by EXIF.tools