Kinexon Sports and Media KNX-HTAG1 UWB Sensor User Manual Tag Handheldx
Kinexon Sports & Media Inc. UWB Sensor Tag Handheldx
Users Manual
Fact Sheet
KINEXON LOCALIZATION SYSTEM
User Manual – Tag Handheld Application
Version 1.2
!
!
!
!
©Kinexon 2017. This document is confidential and contains information which is proprietary to Kinexon Sports & Media Inc.. No
reproduction is permitted without prior express written permission of the author (info@kinexon.com).
!
!-!CONFIDENTIAL!-!! 2!
TAG (Kinexon Transponder):
Material: ABS
Dimensions: 47 x 33 x 7.5 mm
Weight: 15.4 g
Battery Lifetime: up to 3 years (depending on update rate)
Charging: 1.5 hours (100%), 5 V DC
Temperature: -20 – 60 C
Connectivity: 2.4 GHz Bluetooth, 3.4944 to 6.4896 GHz (UWB), RS232 (optional)!
Mounting
Depending on end user requirements, mounting methods will vary.
!
!
!
!
©Kinexon 2017. This document is confidential and contains information which is proprietary to Kinexon Sports & Media Inc.. No
reproduction is permitted without prior express written permission of the author (info@kinexon.com).
!
!-!CONFIDENTIAL!-!! 3!
Regulatory and Legal Information
The Kinexon Receiver has been designed to be in compliance with both the U.S. FCC Part
15 subpart F regulations, sections 15.519 and 15.521 and with the European Union ETSI
EN 302 065 standards. Two different versions of the Kinexon Receiver are available, one
version supports the FCC emissions mask (Region 1) and the second supports the ETSI
standard mask (Region 2).
Disclaimer
The information in this document is subject to change without notice. Kinexon Sports &
Media Inc. assumes no responsibility for inaccuracies or omissions and specifically
disclaims any liabilities, losses, or risks, personal or otherwise, incurred as a
consequence, directly or indirectly, of the use or application of any of the contents of
this document. For the latest documentation, contact Kinexon Sports & Media Inc.
Intended Use
This manual describes the setup and use of the Kinexon Tag. Use this product only for
the purpose it was designed for.
FCC Compliance
This device complies with 47 CFR Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This device may not be employed for the operation of toys. Operation onboard an
aircraft, a ship or a satellite is prohibited.
The use of this device mounted on outdoor structures, e.g., on the outside of a building
or on a telephone pole, or any fixed outdoors infrastructure is prohibited.
Moreover, the following statements apply:
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
!
!
!
©Kinexon 2017. This document is confidential and contains information which is proprietary to Kinexon Sports & Media Inc.. No
reproduction is permitted without prior express written permission of the author (info@kinexon.com).
!
!-!CONFIDENTIAL!-!! 4!
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Important Notice
This equipment may only be operated as a handheld device. Operation with fixed
outdoor antennas is prohibited and could subject the operator to serious legal penalties.
The Kinexon Tag will only operate (i.e. transmit UWB signals) when activated within a
Kinexon network.
FCC Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.
This equipment has very low levels of RF energy that are deemed to comply without
testing of specific absorption ratio (SAR).
Safety Information
• Read and follow all instructions before using the Kinexon Tag.
• Never open the case of the Kinexon Tag. There are no user serviceable parts or
replaceable parts inside the case.
• Do not use the Kinexon Tag if it has been damaged.!