King Sound Enterprise KINGSOUNDIND Remote control switch User Manual C8ABD2B3B4ABD5E6CDBCC6AC

Download:
Mirror Download [FCC.gov]
Document ID	787299
Application ID	PKsFI+e7pPomHmeaJYSZ5w==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	122.96kB (1537053 bits)
Date Submitted	2007-05-02 00:00:00
Date Available	2007-05-02 00:00:00
Creation Date	2007-03-27 16:05:17
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-03-27 16:05:17
Document Title
Document Creator	PScript5.dll Version 5.2
Document Author:	lansing.li

"andySwitchl’" “$2155“
Thank you for your purchase of Handy Switch, the wireless light switch. We are
sure you will be completely satisfied with your purchase.
Package Includes: Sender Unit
(1) Single outlet remote Receiver
base unit with night light - Unit
(Receiver Unit)
(1) Hand held remote switch -
(Sender Unit)
(1) 12V battery Size 23A [1 I]
(1) Removable adhesive (see
Using Removable Adhesive D
and Caution prior to use)
(1) Wall bracket
(2) Screws
. . Removable
The Handy Swrtch operates on radio saws Battery adhesive
frequency; it is not dependent on line
of sight and will perform through walls. doors and floors up to 60 feet away.
Receiver Unit:
Blue night light indicates the unit is correctly installed and power is available. Be
sure the remote switch is in the off position.
Hand Held Remote Switch (sender unit):
The Hand-Held Remote Switch unit has a single onlott switch. Flip the switch up
on the Hand-Held Remote Switch to turn the power ON or flip the switch down
to turn the power OFF,
How To Use:
1. Remote Switch (sender unit) - Remove battery panel
(illus. an).
2. Remove protective shipping tape allowing for contact with
both poles to ensure battery and remote is operational.
3. Plug the receiver outlet into any standard (115V/60Hz)
grounded outlet.The night light will illuminate it the unit is
installed and the host outlet has power. it the
night light does not illuminate check the outlet power with
approved outlet tester has power. Be sure the Remote
Switch is in the OFF position.
Using The Removable Adhesive (optional):
1. Remove the remoteswitch from the wall bracket(see
illust. #2).
2. Remove the protective tape from one side of the remov-
able adhesive.
3. Adhere the exposed side of the adhesive to the remote
switch (sender unit).
4. Remove the protective tape from the opposite side of
the adhesive.
5. Select your location for your remote switch and press into place.
Caution: Cut a small piece off of the removable adhesive and test in a discrete
location prior to use. DO NOT use with delicate or paper wallpaper. May not
adhere well to some vinyl wallpapers. DO NOT use for antique. heirtooms. or
other valuable or irreplaceable items.
NOTE: Apply to surfaces above 50 F (10 C). Adhesive could soften and lose
adhesion above 105 F (40 C).
For best adhesion clean surtace with isopropyl rubbing alcohol. wipe lightly. let
dry. DO NOT use household cleaners on surface belore adhesion.
6. Select your location for vour remote switch and press into place.
Caution: Cut a small piece off of the reusable adhesive
and test in a discrete location prior to use.
Using The Bracket (optional):
What you will need:
Bracket. pencil tor marking holes. (2) enclosed screws. and
screw driver.
1. Select permanent location tor the Remote switch (sender
unit).
2. Mark the screw hole location with the pencil.
3. Using a screwdriver, screw the enclosed screws into the
wall. Aftix bracket to wall as shown in illust. $3. Be sure it is
secure prior to placing the remote switch into the bracket.
For Proper O eration And Safety:
- Use only one andy Switch per AC Outlet.
- 24“ distance 12 leet) should be allowed between each Handy Switch unit.
- DO NOT overload the Handy Switch beyond 300 watts. Maximum output load:
1 15V/60Hzl300W.
- Handy Switch should not be used to power extension cords and power strips
where multiple devices can be powered.
- For indoor use only. DO NOT use with appliances.
NOTE: This Equipment has been tested and found to comply with the limits
for a Class B digital device. pursuant to Part 15 of the FCC Rules. These lim-
its are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates. uses and can radiate
radio frequency energy and. if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications.
However. there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equipment off and
on. the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving unit.
- Increase the separation between the equipment and receiver unit _
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is needed. .
- Consult the dealer or an experienced radio/TV Technician for help.
The users manual or instruction manual for an intentional
or unintentional radiator shall caution the user that
changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment. '

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:2ba23a53-de1c-4367-a2d7-828e0ad1ddd3
Producer                        : Acrobat Distiller 6.0 (Windows)
Modify Date                     : 2007:03:27 16:05:17+08:00
Create Date                     : 2007:03:27 16:05:17+08:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:e70b366a-6ed4-4cc2-b45f-97f4a5a9df09
Format                          : application/pdf
Title                           : 
Creator                         : lansing.li
Author                          : lansing.li

EXIF Metadata provided by EXIF.tools