King Sound Enterprise KINGSOUNDST Remote controller User Manual HandySwitch

King Sound Enterprise Co., Ltd Remote controller HandySwitch

User Manual

1 Handy Switch (KS-080） Wireless Remote Control switch Thank you for your purchase of Handy Switch, the wireless light switch. We are sure you will be completely satisfied with your purchase. Package Includes: (1) Single outlet remote base unit with nightlight (Receiver Units) (1) Hand held remote switch (Sender Unit) (1) 12V Type 23A battery (1) Wall bracket (2) Screws The handy Switch operates on radio frequency; it is not dependent on line of sight and will perform throuth walls, doors and floors up to 50 feet away. Receiver unit: Blue night light indicates the unit is correctly installed and power is available. Be sure the remote switch is in the off position. Hand held remote switch (Sender unit): The Hand-Held Remote Switch unit has a single on/off switch. Flip the switch up on the Hand-Held Remote Switch to turn the power ON or Flip the switch down to turn the power OFF. How to Use: 1. Remote Switch (Sender Unit) – Remove battery panel 2. Remove protective shipping tape allowing for contact with both poles to ensure battery and remote is operational. 3. The night light will illuminate if the unit connects power. Be sure the remote Switch is in the OFF position. Using The Bracket: Bracket, pencil for marking holes, (2) enclosed screw, and screw driver. 1. Select permanent location for the Remote switch (Sender unit). 2. Mark the screw hole location with the pencil. 3. Using a screwdriver, screw the enclosed screws into the wall. For Proper Operation And Safety: 1. Use only Handy switch per AC Outlet. 2. 24” distance (2 feet) should e allowed between each handy switch unit. 3. DO NOT overload the Handy Switch beyond 300 watts. Maximum output load: 115V/60Hz/300W. 4. Handy switch should not be used to power extension cords and power strips where multiple devices can be powered. 5. For indoor use only. DO NOT use with appliances.
2 NOTE: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that ay cause undesired operation. This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving unit. * Increase the separation between the equipment and receiver unit. * Connect the equipment into an outlet on circuit different from that to which the receiver is needed. * Consult the dealer or and experienced radio/TV Technician for help. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Warning:’CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE WITH THE FCC’S RULES (THE FCC’ GRANTEE’) COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT’ 30 Day Limited Warranty This product is warranted to the original purchaser for a period of 30 days from date of purchase. Proof of purchase is required to obtain warranty service. Warranty is for replacement only. No service parts are available for these products. No other warranties are expressed or implemented. Batteries are not covered. For warranty service, please contact Blackstone International Customer Service: 1-888-525-7969 or customerservice@blackstoneltd.com ©2007, Blackstone International Ltd.

Navigation menu