King of Fans 52BENTR BENTOYGA 52-INCH CEILING FAN User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3904977
Application ID	5IMkBTBSmBGyWP/2kkWoDA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	223.2kB (2790041 bits)
Date Submitted	2018-06-28 00:00:00
Date Available	2018-06-28 00:00:00
Creation Date	2018-06-14 18:09:43
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-06-20 10:51:42
Document Title	User Manual
Document Creator	Adobe InDesign CC 13.0 (Macintosh)

Item #xxxx xxx xxx, xxxx xxx xxx,
xxxx xxx xxx, xxxx xxx xxx
Model #51820, 51821, 51822, 51824
ETL Model #52-BENT
USE AND CARE GUIDE
BENTOYGA 52-INCH CEILING FAN
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday.
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
To view an instructional video on how to install this product:
1. Go to www.homedepot.com and enter either the Item or Model number, found in the top
right corner of the cover of this instruction manual, in the search field.
2. Click on your product from the list of search results and click on the video link in the
“Product Overview” section.
THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive
to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators Collection!
Table of Contents
Table of Contents................................................................. 2
Assembly............................................................................... 7
Safety Information................................................................ 2
Operation............................................................................ 14
Warranty................................................................................ 3
Care and Cleaning.............................................................. 15
Pre-Installation..................................................................... 3
Troubleshooting.................................................................. 15
Installation............................................................................. 6
Safety Information
READ AND SAVE THESE INSTRUCTIONS.
1.
2.
3.
To reduce the risk of electric shock, ensure the electricity has
been turned off at the circuit breaker or fuse box before you
begin.
WARNING: To reduce the risk of fire or electric
shock, do not use this fan with any solid-state speed
control device.
All wiring must be in accordance with the National Electrical
Code ANSI/NFPA 70 and local electrical codes. Electrical
installation should be performed by a qualified licensed
electrician.
WARNING: To avoid possible electrical shock, turn
the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.
The outlet box and support structure must be securely mounted
and capable of reliably supporting a minimum of 35 lbs. (15.9
kg). Use only UL-listed outlet boxes marked “Acceptable for
Fan Support of 35 lbs. (15.9 kg) or less.”
4.
The fan must be mounted with a minimum of 7 ft (2.1 m) of
clearance from the trailing edge of the blades to the floor.
5.
Do not place objects in the path of the blades.
6.
To avoid personal injury or damage to the fan and other items,
use caution when working around or cleaning the fan.
7.
After making electrical connections, spliced conductors should
be turned upward and pushed carefully up into the outlet box.
The wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the
outlet box.
8.
WARNING: To reduce the risk of personal injury,
do not bend the blade brackets (also referred to as
flanges) during assembly or after installation. Do
not insert objects in the path of the blades.
WARNING: To reduce the risk of fire, electric shock
or personal injury, mount to outlet box marked
“Acceptable for fan support of 35 lbs. (15.9 kg) or
less”, and use screws provided with the outlet box.
WARNING: Electrical diagrams are for reference
only. If you are using a light kit, refer to the light kit
instructions manual to make the electrical
connections. Optional use of any light kit shall be
UL-listed and marked suitable for use with this fan.
WARNING: To reduce the risk of fire or electric
shock, this fan should only be used with fan speed
control part no. UC7067RYAG, manufactured by Rhine
Electronic Co., LTD.
WARNING: To reduce the risk of electric shock, this
fan must be installed with an isolating wall switch.
All set screws must be checked and retightened where
necessary before installation.
CAUTION: To reduce the risk of personal injury,
use only the screws provided with the outlet box.
CAUTION: Do NOT use this fan with a dimmer switch
or wall control. Using a dimmer switch or wall control
will damage the fan.
CAUTION: Changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
Warranty
The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a
lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic
blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date
of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior
model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing
and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper installation or by affixing any
accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass finish,
including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying
weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons
shall render the warranty invalid. There is no other express warranty. Home Decorators Collection hereby disclaims any and all warranties,
including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any
implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow a
limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental,
consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by
law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you.
This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior
warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.
Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.
Pre-Installation
SPECIFICATIONS
Size
Speed
Volts
Fan Power
Consumption
(without lights)
WATT
Airflow
CFM
Airflow Efficiency
(Higher Is Better)
CFM/WATT
XX
XXXX
XXX
XX
XXXX
XXX
XX
XXXX
XXX
Low
52 in.
Medium
120
High
Net
Weight
Gross
Weight
Cubic Feet
XX.XX lb
(XX.X kg)
XX.X lb
(XX.X kg)
X.X cu. ft.
(X.XX m³)
NOTE: These are approximate measures. They do not
include the Amps and Wattage used by the light kit.
TOOLS REQUIRED
Phillips
screwdriver
Flat blade
screwdriver
Adjustable
wrench
Electrical
tape
Wire cutter
/ Stripper
Step ladder
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-Installation (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
BB
EE
DD
Part
Description
CC
Quantity
AA
Blade attachment screws
16
BB
Plastic wire connecting nut
CC
Blade arm hardware (screw and lockwasher)
16
DD
Hanger pin
EE
Clip
Pre-Installation (continued)
PACKAGE CONTENTS
Part
Description
Quantity
Part
Slide-on mounting bracket
(inside canopy)
Ball/downrod assembly
Canopy with canopy ring attached
Decorative motor collar cover
Fan motor assembly
Blade
Blade arm
Description
Quantity
Light kit pan
LED light kit assembly
Glass shade
3-pin extension wire
2-pin extension wire
Receiver
Remote control (batteries included)
IMPORTANT: This product and/or components are
governed by one or more of the following U.S. Patents:
5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117
and other patents pending.
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Installation
MOUNTING OPTIONS
WARNING: To reduce the risk of fire, electric shock or
personal injury, mount to outlet box marked “Acceptable
for fan support of 35 lbs. (15.9 kg) or less”, and use
screws provided with the outlet box. An outlet box
commonly used for the support of lighting fixtures may
not be acceptable for fan support and may need to be
replaced. If in doubt, consult a qualified electrician.
NOTE: You may need a longer downrod to maintain
proper blade clearance when installing on a steep, sloped
ceiling. The maximum angle allowable is 30° away from
horizontal.
Hanger Bar
If your ceiling fan does not have an existing UL-listed mounting
box, then install one using the following instructions:
□□ Disconnect the power by removing the fuses or turning off
the circuit breakers.
□□ Secure the outlet box directly to the building structure. Use
the appropriate fasteners and materials. The outlet box and
support structure must be securely mounted and capable of
reliably supporting a minimum of 35 lbs. (15.9 kg). Use only
UL-listed outlet boxes marked “Acceptable for fan support
of 35 lbs. (15.9 kg) or less” Do not use a plastic outlet box.
The illustrations below show three different ways to mount the
outlet box.
Outlet Box
If the canopy touches the downrod, then remove the decorative canopy
bottom cover, and turn the canopy 180° before attaching the canopy to
the mounting plate.
To hang your fan where there is an existing fixture but no ceiling joist,
you may need an installation hanger bar as shown above
(available at any Home Depot store).
Outlet Box
Outlet Box
Provide Strong
Support
Recessed
Outlet
Box
Ceiling
Mounting
Plate
Assembly - Standard Ceiling Mount
Preparing for mounting
□□ Remove the magnetic canopy bottom cover (FF) from the
□□
□□
Routing the wires
NOTE: The fan comes with 12 in. lead wires for use with the
provided 6 in. ball downrod assembly (B). If you wish to use
longer downrod, attach the 3-pin extension wire (K) and
2-pin extension wire (L) to the fan by connecting the molded
adaptor plugs from the extension wires to the 3-pin and
2-pin adaptor plugs from the fan.
canopy (C) by pulling it off.
Loosen the two canopy screws (GG) located in the bottom of
the mounting bracket (A).
Turn the mounting bracket (A) counterclockwise and lift up to
remove the mounting bracket from the canopy (C).
□□ Insert the ball/downrod (B) through the canopy (C) and
canopy bottom cover (FF), and then slide the decorative motor
collar cover (D) onto the end of the ball/downrod (B). Make
sure the slots on the canopy bottom cover (FF) are facing the
bottom of the canopy (C).
□□ Route the wires exiting the top of the motor assembly (E)
through the ball/downrod (B) as shown.
GG
FF
FF
Assembling the fan
WARNING: Failure to properly install the hanger pin (DD)
and clip (EE)could result in the fan becoming loose and
possibly falling.
FF
CAUTION: To ensure wobble-free operation and to avoid
damage to the fan, the downrod (B) and the setscrew
(GG) must be completely tightened.
□□ Loosen, but do not remove, the setscrew (HH) on the motor collar
□□
□□
(II) on top of the fan motor assembly (E).
Slip downrod (B) into motor collar (II), aligning holes on both
parts. Insert hanger pin (DD) through holes on collar and downrod
(E), then insert the clip (EE) into pin until it snaps into place.
Re-tighten the setscrew (HH) on the collar (II) on top of the fan
motor assembly (E).
II
DD
EE
HH
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Hanging the Fan
Attaching the fan to the electrical
box
WARNING: To reduce the risk of fire, electric shock or personal
injury, mount to outlet box marked “Acceptable for fan support
of 35 lbs. (15.9 kg) or less”, and use screws provided with the
outlet box.
WARNING: The tab in the ring at the bottom of the mounting
bracket must rest in the groove of the hanger ball. Failure to
properly seat the tab in the groove could cause damage to the
wiring and cause the fan to wobble.
NOTE: The mounting bracket (A) is designed to slide into place on
an outlet box with the outlet box screws (HH) installed.
□□ Carefully lift the fan motor assembly (E) up to the slide-on
mounting bracket (A).
□□ Loosen the two mounting screws (JJ) in the outlet box.
□□ Pass the 120-Volt supply wires through the center hole in the
□□
□□
Hanging the fan
□□ Insert the ball portion of the ball/downrod (B) assembly
mounting bracket (A).
Slide the mounting bracket (A) on to the mounting screws (JJ)
and center the mounting bracket (A) in relation to the outlet box.
If necessary, use leveling washers (not included) between the
slide-on mounting bracket (A) and the outlet box. The flat side of
the slide-on mounting bracket (A) should face toward the outlet
box, as shown.
Securely tighten the two mounting screws (JJ).
□□
into the socket of the slide-on mounting bracket (A).
Turn the ball/downrod assembly clockwise until it is seated
with the tab of the slide-on mounting bracket (A) aligned
with the slot in the ball.
JJ
JJ
Connecting the safety cable
WARNING: To reduce the risk of fire, electric shock or personal
injury, mount to outlet box marked “Acceptable for fan support
of 35 lbs. 15.9 kg) or less”, and use screws provided with the
outlet box.
□ Turn the wood screw (KK) (not provided) into the ceiling.
□ Place the looped end of the safety cable (LL) onto the wood
screw firmly, or connect the safety cable directly to the
outer joist.
Assembly - Hanging the Fan
Setting the code on the remote
control and receiver
NOTE: The frequencies on your receiver and hand unit have
been preset at the factory. Before installing the receiver,
make sure the dip switches on the receiver and hand unit are
set to the same frequency. The dip switches on the hand unit
are located inside the battery compartment.
NOTE: The switch marked ON/DIM controls the dimming
function of the lights: Set the switch to ON to disable the
dimming function. Set the switch to DIM to enable the
dimming function.
□□ Remove the remote control (N) battery cover by pressing
□□
□□
□□
firmly on the arrow and sliding the cover off.
Slide the dip switches (KK) to your choice of either up or
down. The factory setting is up.
Slide the dip switches (KK) on the receiver (M) to the same
position as set on the remote control (N).
Replace the battery cover on the remote control (N).
ON
ON
DIP
DIM
12V 23A
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Hanging the Fan (continued)
Wiring the receiver to the household
wiring
Wiring the fan to the receiver
NOTE: The fan comes with 12 in. lead wires for use with the
provided 6 in. ball downrod assembly (B). If you wish to use
longer downrod, attach the 3-pin extension wire (K) and
2-pin extension wire (L) to the fan by connecting the molded
adaptor plugs from the extension wires to the 3-pin and
2-pin adaptor plugs from the fan.
WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.
WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
□□ Wire the receiver to the fan wires by connecting the 2-pin
molded adaptor plug (LL) and 3-pin molded adaptor plug (MM)
from receiver (M) with the 2-pin and 3-pin molded adaptor
plugs from the fan motor assembly (E).
IMPORTANT: Use the wire connecting nuts (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
□□ Spread the wires apart so that the green and white wires
□□
□□
□□
□□
Outlet box
in the ceiling
(NN)
are on one side of the outlet box and the black wire is on the
other side.
Connect the green fan wires to the household ground wire
(this may be a green or bare wire) using a wire connecting
nut (BB).
Connect the receiver (M) black (or red) wire to the household
black (hot) wire using a wire connecting nut (BB).
Connect the receiver (M) white wire to the household white
wire (neutral) wire using a wire connecting nut (BB).
Secure each wire connecting nut using electrical tape.
Outlet Box
in the ceiling
(NN)
BB (x3)
Black
Black
(or Red)
White
White
Green (or Bare)
MM
Green
Receiver
Antenna
Receiver (M)
10
LL
Assembly - Hanging the Fan (continued)
Attaching the Canopy
□□ Align the locking slots at the bottom of the canopy (C) with the
□□
□□
two canopy screws (GG) in the bottom of the mounting bracket
(A). Push up to engage the slots and turn clockwise to lock in
place.
Firmly tighten the two canopy screws (GG).
Attach the magnetic canopy bottom cover (FF) by placing it
against the bottom of the canopy (C).
11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Attaching the Fan Blade
Installing the blades to the blade
brackets
AA
□□ Attach a blade (F) to a blade bracket (G) by inserting blade
□□
□□
attachment screws (AA) through the holes in the blade and into
the blade bracket.
Tighten each blade attachment screw (AA) securely.
Repeat these steps for each blade (F) and blade bracket (G).
Attaching the blade assemblies to
the motor.
□□ Insert the blade/blade bracket assembly (OO) through the hole
□□
in the side of the center flywheel on the fan motor assembly
(E), align the three screws holes in the blade bracket (G) with
the screw holes in the center flywheel and secure with blade
arm screws (CC).
Repeat this step for the remaining the blade assemblies.
OO
CC
Assembly - Attaching the Light Kit
Installing the light kit pan
□□ Remove one screw (PP) from the black bracket below the fan
□□
□□
□□
motor assembly (E), and loosen but do not remove the other
two screws.
Push the light kit pan (H) up to the fan motor assembly (E) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (H) clockwise.
Re-install the screw (PP) that was removed in the first step.
Make sure all the screws are firmly tightened.
PP
12
Assembly - Attaching the Light Kit (continued)
Attaching the light kit fitter assembly
□□ Remove one screw (QQ) from the light kit pan, and loosen, but
□□
□□
□□
□□
do not remove the other two screws.
Connect the wires from the light kit fitter assembly (I) to the
wires exiting from the bottom of the fan motor assembly (E) by
connecting the molded adaptor plugs together (black to black,
white to white). Carefully tuck all wires into the light kit pan.
Push the LED light kit fitter assembly (I) up to the light kit
pan so that the two loosened screw heads fit into the keyhole
slots. Turn the LED light kit fitter assembly (I) clockwise to
secure.
Re-install the screw (QQ) that was removed in the first step.
Make sure all the screws are firmly tightened.
QQ
Installing the glass shade
WARNING: Do not overtighten when installing the glass shade
into the light kit pan. Allow the glass shade to cool completely
before removing.
□□ Place the glass shade (J) into the light kit pan (H), aligning the
three flat areas on the top of the flange of the glass shade (J)
with the three raised dimples in the light kit pan (H). Turn the
shade clockwise until it stops.
13
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operating Your Fan and Remote Control
Remote Control - Your fan is equipped with a remote control to operate
the speed and lights of your new ceiling fan.
Speed setting for warm or cool weather depends on factors such as
the room size, ceiling height, number of fans and so on.
The fan is shipped from the factory with the reversing switch (YY)
positioned to circulate air downward. If airflow is desired in the
opposite direction, turn your fan off and wait for the blades to stop
turning, then slide the reversing switch (located in top glass housing)
to the opposite position, and turn the fan on again. The fan blades will
turn in the opposite direction and reverse airflow.
NOTE: Wait for the fan to stop before reversing the direction of the
blade rotation.
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
Transmitter operation
NOTE: This remote is equipped with a 16-code combination. To prevent
possible interference from or to other remote units such as garage
door openers, car alarm or security system, change the combination
code but be sure that the code on both the hand held transmitter and
receiver in the fan are the same.
□□ Downlight button (TT): Press and release immediately
to turn the downlight on or off. Press and hold to dim or
brighten the light to the desired level and then release.
NOTE: Pressing on the middle of the light button, will turn on the
uplight only.
Power Indicator will light
when buttons are pushed
Install a 12-V battery (included).
□□ Remove the protective coating from the battery.
□□ Remove the battery cover from the remote control.
□□ Install the 12-Volt battery (included) into the battery compartment of
□□
□□
□□
□□
□□
□□
□□
the remote control (N).
Replace the battery cover on the remote control.
Press the desired button on the remote control (N) to operate the fan:
“3” button: Press to turn the fan on and set the fan speed to high.
“2” button: Press to turn the fan on and set the fan speed to medium.
“1” button: Press to turn the fan on and set the fan speed to low.
Power button (RR): Press to turn the fan off.
Uplight button (SS): Press and release immediately to turn the
uplight on or off. Press and hold to dim or brighten the light to the
desired level and then release.
14
ON/High
ON/Medium
ON/Low
RR: Power OFF
SS: Up Light ON/OFF
& Dimmer Function
TT: Down Light ON/OFF
& Dimmer Function
Care and Cleaning
WARNING: Make sure the power is off before cleaning
your fan.
□□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade
attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling.
□□ Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage
□□
□□
the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish.
You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a
light application of shoe polish.
You do not need to oil your fan. The motor has permanently-lubricated sealed ball bearings.
Troubleshooting
Problem
Solution
The fan will not start.
□□
□□
□□
□□
□□
The fan is noisy.
□□
□□
□□
□□
□□
The fan wobbles.
□□ Check that all blade and blade arm screws are secure.
□□ Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on
the ceiling above the tip of one of the blades. Measure from a point on the center of the blade to the point on the
ceiling. Rotate the fan until the next blade is positioned for measurement, and measure from the same point on
each blade to the ceiling. Repeat for each blade. Any measurement deviation should be within 1/8 in. Run the fan
for ten minutes. If the fan continues to wobble please contact Customer Service and a balancing kit will be sent
to you at no charge.
Check the main and branch circuit fuses or breakers.
Check the line wire connections to the fan and switch wire connections in the switch housing.
Check the battery in the remote control.
Ensure you are in the normal range of 10-20 feet.
Remember to turn off the power supply before checking the dip switch settings.
Ensure all motor housing screws are snug.
Ensure the screws that attach the fan blade bracket to the motor hub are tight.
Ensure the wire nut connections are not rattling against each other or the interior wall of the switch housing.
Allow a 24-hour “breaking in” period. Most noises associated with a new fan disappear during this time.
If you are using the Ceiling Fan light kit, ensure the screws securing the glassware are tight. Check that the light
bulbs are also secure.
□□ Ensure the canopy is a short distance from the ceiling. It should not touch the ceiling.
□□ Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box.
15
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Questions, problems, missing parts? Before returning to the store,
call Home Depot Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday.
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Warning                         : Root object (230 0 obj) not found at 2536921

EXIF Metadata provided by EXIF.tools