King of Fans 52MONTD 52 Inch Mormont User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3310341
Application ID	9/w16hq4wa6TFDeLjjcA9A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	337.18kB (4214726 bits)
Date Submitted	2017-03-09 00:00:00
Date Available	2017-03-10 00:00:00
Creation Date	2017-03-02 14:34:20
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-03-02 14:34:27
Document Title	User Manual
Document Creator	Adobe InDesign CC 2015 (Macintosh)

Item #XXXX XXX XXX
Model # 56012, 56014, 56019
UL Model # 52-MONT
USE AND CARE GUIDE
ACKERLY 52-INCH CEILING FAN
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday.
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
To view an instructional video on how to install this product:
1. Go to www.homedepot.com and enter either the Item or Model number, found in the top
right corner of the cover of this instruction manual, in the search field.
2. Click on your product from the list of search results and click on the video link in the
“Product Overview” section.
THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive
to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators Collection!
Table of Contents
Table of Contents................................................................. 2
Assembly............................................................................... 7
Safety Information................................................................ 2
Operation............................................................................ 13
Warranty................................................................................ 3
Care and Cleaning.............................................................. 14
Pre-Installation..................................................................... 3
Troubleshooting.................................................................. 14
Installation............................................................................. 6
Safety Information
READ AND SAVE THESE INSTRUCTIONS.
1.
To reduce the risk of electric shock, ensure the electricity has
been turned off at the circuit breaker or fuse box before you
begin.
2.
All wiring must be in accordance with the National Electrical
Code ANSI/NFPA 70 and local electrical codes. Electrical
installation should be performed by a qualified licensed
electrician.
3.
The outlet box and support structure must be securely mounted
and capable of reliably supporting 35 lbs. (15.9 kg). Use only
UL Listed outlet boxes marked”Acceptable for Fan Support of
35 lbs. (15.9 kg) or less”.
4.
The fan must be mounted with a minimum of 7 ft (2.1 m)
clearance from the trailing edge of the blades to the floor.
5.
Do not operate the reversing switch while the fan blades are
in motion. You must turn the fan off and stop the blades before
you reverse the blade direction.
6.
Do not place objects in the path of the blades.
7.
To avoid personal injury or damage to the fan and other items,
use caution when working around or cleaning the fan.
8.
Electrical diagrams are for reference only. Light kits that are
not packed with the fan must be UL-listed and marked suitable
for use with the model fan you are installing. Switches must be
UL General Use Switches. Refer to the instructions packaged
with the light kits and switches for proper assembly.
9.
After making electrical connections, spliced conductors should
be turned upward and pushed carefully up into the outlet box.
The wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the
outlet box.
WARNING: To reduce the risk of personal injury,
do not bend the blade brackets (also referred to as
flanges) during assembly or after installation. Do not
insert objects in the path of the blades.
WARNING: Suitable for use with solid-state speed
controls.
WARNING: To avoid possible electrical shock,
turn the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.
WARNING: Electrical diagrams are for reference
only. Optional use of any light kit shall be UL-listed
and marked suitable for use with this fan.
WARNING: To reduce the risk of fire or electric
shock, “this fan should only be used with fan speed
control part no. MR140A manufactured by Satellite
Industrial Co., LTD” or control part no. AP-8RDL
manufactured by Dawnsun.
WARNING: To reduce the risk of electric shock, this
fan must be installed with an isolating wall switch.
CAUTION: To reduce the risk of personal injury,
use only the screws provided with the outlet box.
CAUTION: Changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
10. All setscrews must be checked and retightened where
necessary before installation.
CAUTION: Do NOT use this fan with a dimmer switch
or wall control. Using a dimmer switch or wall control
will damage the fan.
Warranty
The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a
lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic
blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date
of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior
model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing
and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installation, or by affixing any
accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass finish,
including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying
weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons
shall render the warranty invalid. There is no other express warranty. Home Decorators Collection hereby disclaims any and all warranties,
including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any
implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow a
limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental,
consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by
law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you.
This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior
warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.
Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.
Pre-Installation
SPECIFICATIONS
Size
Speed
Volts
Low
52 in.
Medium
120
High
Amps
Watts
RPM
CFM
0.24
14
65
1844
0.34
27
100
2882
0.49
58
155
4416
Net
Weight
Gross
Weight
Cube Feet
18.74 lbs.
(8.5 kg)
21.83 lbs.
(9.9 kg)
XXX cu.ft.
NOTE: These are approximate measures. They do not
include the Amps and Wattage used by the light kit.
TOOLS REQUIRED
Phillips
screwdriver
Flat blade
screwdriver
Adjustable
wrench
Electrical
tape
Wire
cutter
Step ladder
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-Installation (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
Part
Description
BB
Quantity
AA
Blade attachment screws
16
BB
Plastic wire connector
CC
Rubber gasket
CC
Pre-Installation (continued)
PACKAGE CONTENTS
1 2 3 4
ON DIP
Part
Description
Quantity
Slide-on mounting bracket
(inside canopy)
Ball/downrod assembly
Part
Description
Quantity
Blade
Light kit pan
Light kit fitter assembly
Canopy
Shatter resistant bowl
Decorative motor collar cover
Receiver
Fan-motor assembly
Remote control (battery included)
Extension lead wire
IMPORTANT: This product and/or components are
governed by one or more of the following U.S. Patents:
5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117
and other patents pending.
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Installation
MOUNTING OPTIONS
NOTE: You may need a longer downrod to maintain
proper blade clearance when installing on a steep, sloped
ceiling. The maximum angle allowable is 30° away from
horizontal.
WARNING: To reduce the risk of fire, electric shock,
or personal injury, mount the fan to an outlet box
marked “Acceptable for fan support of 35 lbs.
(15.9kg) or less” and use the screws provided with
the outlet box. An outlet box commonly used for the
support of lighting fixtures may not be acceptable for
fan support and may need to be replaced. If in doubt,
consult a qualified electrician.
Hanger Bar
If your ceiling fan does not have an existing UL-listed mounting
box, then install one using the following instructions:
□□ Disconnect the power by removing the fuses or turning off
the circuit breakers.
□□ Secure the outlet box directly to the building structure.
Outlet Box
Use the appropriate fasteners and materials. The outlet box
and its bracing must be able to fully support the weight
of the moving fan (at least 35 lbs.). Do not use a plastic
outlet box.
The illustrations below show three different ways to mount the
outlet box.
If the canopy (C) touches the ball/downrod assembly (B), then remove
the decorative canopy bottom cover and turn the canopy (C) 180°
before attaching the canopy (C) to the mounting plate.
To hang your fan where there is an existing fixture but no ceiling joist,
you may need an installation hanger bar as shown above
(available at any Home Depot store).
Outlet Box
Outlet Box
Provide Strong
Support
Recessed
Outlet
Box
Ceiling
Mounting
Plate
Assembly - Standard Ceiling Mount
Preparation for standard mounting
□□ Remove the canopy ring (GG) by turning the ring clockwise
□□
□□
Routing the wires
□□ Route the wires exiting the top of the fan-motor assembly
(E) through the canopy ring (GG)
□□ Insert the ball/downrod (B) through the canopy (C) and
slide the decorative motor collar cover (D) onto the end of
the ball/downrod (B). Make sure the slots on the canopy
(C) are on top.
□□ Route the wires exiting the top of the fan motor assembly
(E) through the downrod as shown.
until it unlocks.
Remove the mounting bracket (A) from the canopy (C) by
loosening the two canopy screws (EE) located in the “L
shaped” slots.
Remove and save the two canopy screws (FF) in the round
holes. This will enable you to remove the mounting bracket (A).
EE
GG
FF
GG
Assembling the fan
CAUTION: To ensure wobble-free operation and to
avoid damage to the fan, the downrod (B) and the
setscrew (JJ) must be completely tightened.
NOTE: This fan is equipped with a safety tab (II). Should
the setscrew (JJ) ever become loose while the fan is
running in reverse, the safety tab (II) will engage and
stop the fan from falling.
□□ Loosen, but do not remove, the setscrew (JJ) on the collar
(HH) on top of the fan-motor assembly (E).
□□ Install the downrod (B) by inserting it into the motor collar
□□
(HH), and turning it clockwise until it is tight.
Re-tighten the setscrew (JJ) on the collar (HH) on top of the
fan motor assembly (E).
JJ
II
HH
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Close-to-Ceiling Mount
Close-To-Ceiling Mounting
□□ Remove the canopy ring (GG) from the canopy (C) by
□□
□□
□□
EE
Routing the wires
□□ Remove three of the six screws and lock washers (LL)
(every other one) securing the motor collar (HH) to the
top of the fan motor housing (E).
□□ Route the wires exiting the top of the fan-motor
assembly (E) through the rubber gasket (CC) aligning
the holes in the rubber gasket (CC) with the three
screw holes in the fan-motor assembly (E).
□□ Route the wires exiting the top of the fan-motor
assembly (E) through the canopy ring (GG), and
the canopy (C) (make sure the slot openings for
the canopy ring and canopy are on top. Place the
canopy (C) over the collar (HH) at the top of the motor
assembly (E).
□□ Align the mounting holes with the holes in the
motor (E) and fasten, using the three screws and
lock-washers (LL) removed previously. Tighten the
mounting screws securely.
turning the ring counter-clockwise until it unlocks.
Remove the mounting bracket (A) from the canopy (C) by
loosening the two canopy screws (EE) located in the “L
shaped” slots.
Remove and save the two canopy screws (FF) in the
round holes. This will enable you to remove the mounting
bracket (A).
Remove the decorative canopy bottom cover (KK) from the
canopy (C) by depressing the three studs.
FF
LL
KK
GG
GG
CC
HH
Assembly - Hanging the Fan
Attaching the fan to the
electrical box
Hanging the fan
WARNING: To reduce the risk of fire, electric shock,
or other personal injury, mount the fan to an outlet
box or supporting system marked “Acceptable for
fan support of 35 lbs. (15.9kg) or less” and use
the mounting screws provided with the outlet box.
WARNING: The hook as shown is only to balance
the fan while attaching wiring. Failure to hang as
shown may result in hook breaking, causing the
fan to fall. The hook must pass from inside to the
outside of the canopy.
NOTE: The mounting bracket (A) is designed to
slide into place on an outlet box with the outlet box
screws (MM).
WARNING: When hanging the fan on the hook (XX)
it is critical that you use one of the non-slotted
(round) holes in the canopy (C).
□□ Pass the 120-Volt supply wires through the center hole
□□ Carefully lift the fan-motor assembly (E) up to the slide-on
□□
□□ Seat the hanger ball portion of the ball/downrod assembly (B)
□□
mounting bracket (A).
in the slide-on mounting bracket (A).
Install the ceiling slide-on mounting bracket (A) on the
outlet box by sliding the slide-on mounting bracket (A)
over the two screws (MM) provided with the outlet box. If
necessary, use leveling washers (not included) between
the slide-on mounting bracket (A) and the outlet box.
Note that the flat side of the slide-on mounting bracket
(A) is toward the outlet box.
Securely tighten the two mounting screws (MM).
□□
in the mounting bracket socket. Ensure that the tab on the
slide-on mounting bracket (A) socket is properly seated in the
groove in the hanger ball.
If using close-to-ceiling mounting, hang the fan on the hook
provided by utilizing one of the holes at the outer rim of the
ceiling canopy (C).
MM
MM
XX
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Hanging the Fan (continued)
Setting the code on the remote
control and receiver
NOTE: The frequencies on your receiver and hand unit have
been preset at the factory. Before installing the receiver,
make sure the dip switches on the receiver and hand unit are
set to the same frequency. The dip switches on the hand unit
are located inside the battery compartment.
ON
ON
NOTE: The switch marked “O/D” controls the dimming
function of the lights. If using non-dimmable bulbs, use a
ballpoint pen or small screwdriver to set the switch to “O” to
disable the dimming function. If using dimmable bulbs, set
the switch to “D” to enable the dimming function.
ZZ
ON
NOTE: The battery will weaken with age and should be
replaced before leaking takes place as this will damage the
hand unit. Dispose of used battery properly and keep the
battery out of the reach of children.
OO
□□ Remove the remote control (K) battery cover by pressing
1 2 3 4
□□
ON DIP
□□
firmly on the arrow and sliding the cover off.
Slide the dip switches (ZZ) to your choice of either up or
down. The factory setting is up.
Slide the dip switches (ZZ) on the receiver (J) to the same
position as set on the remote control (K).
□□ Install two 1.5V AAA batteries (included).
□□ Replace the battery cover on the remote control (K).
□□ Insert the silicone rubber stopper (OO) into the hole on the
receiver (J) to cover the dip switches.
Installing the receiver
WARNING: To reduce the risk of fire or electric shock,
remember to disconnect power. The electrical wiring must
meet all local and national electrical code requirements.
The electrical source and fan must be 110/120 volt, 60Hz.
Do not use this product in conjunction with any variable wall
control. Incorrect wire connection can damage this receiver.
CAUTION: If other fan wires are a different color, have this
unit installed by a licensed electrician.
AAA
CAUTION: Do not immerse in water. Do not pull on or cut the
receiver leads shorter. Do not drop or bump the unit.
BBB
□□ Position the house supply wires (AAA) to one side of the
□□
slide-on mounting bracket (A); position the fan wires (BBB)
to the opposite side.
Insert the narrow end of the receiver (as shown, flat side
towards the ceiling) into the slide-on mounting bracket until
it rests on top of the ball/downrod assembly.
10
Assembly - Hanging the Fan (continued)
Wiring the receiver to the household
wiring
WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.
Wiring the fan to the receiver
NOTE: The fan comes with 12 in. lead wires for use with the
provided 6 in. ball downrod assembly (B), if you wish to use
longer downrod, you can use the extension lead wire (42 in.) (L)
provided.
□□ If using the 6 in. ball downrod assembly (B) provided, wire
WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
□□
IMPORTANT: Use the wire connecting nuts (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
the receiver to the fan wires by connecting the molded
adaptor plug from receiver (J) with molded adaptor of the
fan motor assembly (E) together.
If you wish to use longer downrod, you can use the
extension lead wire (42 in.) (L) provided by connecting the
molded adaptor together.
□□ Spread the wires apart so that the green and white wires
□□
□□
□□
□□
Outlet box
in the ceiling
(NN)
are on one side of the outlet box and the black wire is on the
other side.
Connect the green fan wires to the household ground wire
(this may be a green or bare wire) using a wire connecting
nut (BB).
Connect the receiver (J) red wire to the household black
(hot) wire using a wire connecting nut (BB).
Connect the receiver (J) white wire to the household white
wire (neutral) using a wire connecting nut (BB).
Secure each wire connecting nut using electrical tape.
Green
ON DIP
1 2 3 4
Outlet Box
BB (x3)
Black
Red
Green (or Bare)
White
Green
Receiver
Antenna
ON DIP
1 2 3 4
Receiver (J)
11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Hanging the Fan (continued)
7a
7b
Mounting the fan-motor assembly
(standard mount)
WARNING: When using the standard ball/downrod mounting,
the tab in the ring at the bottom of the mounting bracket
must rest in the groove of the hanger ball. Failure to properly
seat the tab in the groove could cause damage to the wiring.
Mounting the fan-motor assembly
(close-to-ceiling mount)
WARNING: The locking slots of the ceiling canopy are
provided only as an aid to mounting. Do not leave the fan
assembly unattended until all four canopy screws are engage
and firmly tightened.
□□ Align the locking slots of the ceiling canopy (C) with the two
□□ Align the locking slots of the ceiling canopy (C) with the two
□□
□□
□□
□□
□□
screws (EE) in the mounting bracket (A). Push up to engage
the slots and turn clockwise to lock in place.
Firmly tighten the two mounting screws (EE).
Install the two mounting screws (FF) (saved from Assembly
Step 1 “Preparation for standard mounting”) into the holes in
the canopy (C) and tighten firmly.
Install the decorative canopy ring (GG) by aligning the ring’s
slots with the screws in the canopy (C). Rotate the ring
counter-clockwise to lock in place.
EE
□□
screws (EE) in the mounting bracket (A). Push up to engage
the slots and turn clockwise to lock in place.
Firmly tighten the two mounting screws (EE).
Install the two mounting screws (FF) (saved from assembly
Step 1 “Preparing for mounting”) into the holes in the
canopy (C) and tightened firmly.
Install the decorative canopy ring (GG) by aligning the ring’s
slots with the screws in the canopy (C). Rotate the ring
clockwise to lock in place.
EE
GG
GG
Assembly - Attaching the Blades
Attaching the fan blades
□□ Attach a blade (F) to the fan-motor housing (E) by inserting the
□□
□□
blade (F) into slots in the side of the fan motor housing (E) and
aligning the three screws holes in the blade with the holes in
the center flywheel and secure with screws (AA).
Make sure all the screws are firmly tightened.
Repeat these steps for the remaining blades.
AA
12
Assembly - Attaching the Light Kit
Installing the light kit pan
□□ Remove one screw (PP) from the black bracket below fan
□□
□□
□□
motor assembly (E), and loosen but do not remove the
other two screws.
Push the light kit pan (G) up to the fan motor assembly (E)
so that the two loosened screw heads fit into the keyhole
slots. Turn the light kit pan (G) clockwise.
Re-install the screw (PP) that was removed in step 1.
Make sure all the screws are firmly tightened.
PP
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit pan.
□□ Remove one screw (QQ) from the light kit pan (G) and
loosen, but do not remove the other two screws.
□□ Connect the wires from the light kit fitter assembly (H) to
□□
□□
□□
the wires from the fan motor assembly (E) by connecting
the molded adaptor plugs together. Carefully tuck all wires
and splices into the switch cup.
Push the light kit fitter assembly (H) up to the light kit
pan (G) so that the two loosened screw heads fit into
the keyhole slots. Turn the light kit fitter assembly (H)
clockwise to secure.
Re-install the screw (QQ) that was removed in step 1.
Make sure all the screws are firmly tightened.
QQ
Installing the shatter resistant bowl
CAUTION: Make sure the power is off before attaching or
removing the shatter resistant bowl.
WARNING: Allow the shatter resistant bowl to cool completely
before removing.
□□ Place the shatter resistant bowl (I) into the light kit pan (G),
□□
aligning the three flat areas on the top flange of the shatter
resistant bowl (I) with the three raised dimples in the light
kit pan.
Turn the shatter resistant bowl (I) clockwise until it stops.
13
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operating Your Fan and Remote Control
Remote Control - Your fan is equipped with a remote control to operate
the speed and lights of your new ceiling fan.
A. Warm weather
Speed setting for warm or cool weather depends on factors such as
the room size, ceiling height, number of fans and so on.
YY
The fan is shipped from the factory with the reversing switch (YY)
positioned to circulate air downward. If airflow is desired in the
opposite direction, turn your fan off and wait for the blades to stop
turning, then slide the reversing switch (located on the top of the
motor housing) to the opposite position, and turn the fan on again. The
fan blades will turn in the opposite direction and reverse airflow.
B. Cool weather
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
Operating Your Fan and Remote Control
1.
Power ON/OFF. - Press and release the
button to turn the fan and light on or off.
button for 5 seconds to use the “walk away time delay”; this will active the light
for 30 seconds (the light will be activated at 50% brightness).
□□ Press and hold the
2.
Fan Speed - LEDs on the fan speed button will illuminate to the corresponding speed.
- Press and release 1 time - turns the fan on high speed.
- Press and release 2 times - turns the fan on medium speed.
- Press and release 3 times - turns the fan on low speed.
- Press and release 4 times - turns the fan off.
3.
□□
□□
4.
Light ON/OFF
Press and release the
button to turn the light on or off.
Press and hold the
button to activate the dimmer function (as long as you have NOT previously set
O/D dip switch in your remote to the “ON” position).
Comfort BreezeTM
□□ Press and release
button to enable Comfort BreezeTM; this will change your fan speed randomly,
simulating a relaxing breeze. To cancel this feature press or .
5.
Timer
- While the fan is on press 1 time - turns on a 2 hour run timer.
- While the fan is on press 2 times - turns on a 4 hour run timer.
- While the fan is on press 3 times - turns on an 8 hour run timer.
14
Care and Cleaning
WARNING: Make sure the power is off before cleaning
your fan.
□□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade
attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling.
□□ Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage
□□
□□
the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish. The
plating is sealed with a lacquer to minimize discoloration or tarnishing.
You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a
light application of shoe polish.
You do not need to oil your fan. The motor has permanently-lubricated sealed ball bearings.
Troubleshooting
Problem
Solution
The fan will not start.
□□
□□
□□
□□
□□
□□
□□
The fan is noisy.
□□
□□
□□
□□
□□
The fan wobbles.
□□ Check that all blade and blade arm screws are secure.
□□ Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the
ceiling above the tip of one of the blades. Measure from a point on the center of each blade to the point on the
ceiling. Rotate the fan until the next blade is positioned for measurement. Repeat for each blade. Any measurement deviation should be within 1/8”. Run the fan for ten minutes. If the fan continues to wobble please contact
Customer Service and a balancing kit will be sent to you at no charge.
Check the main and branch circuit fuses or breakers.
Check to make sure the wall switch is in the on position if applicable.
Check the line wire connections to the fan and switch wire connections in the switch housing.
Check the battery in the transmitter.
Ensure you are in the normal range of 10-20 feet.
Ensure the dip switch settings are the same on the transmitter and receiver.
Remember to turn off the power supply before checking the dip switches settings.
Ensure all motor housing screws are snug.
Ensure the screws that attach the fan blade bracket to the motor hub are tight.
Ensure the wire nut connections are not rattling against each other or the interior wall of the switch housing.
Allow a 24-hour “breaking in” period. Most noises associated with a new fan disappear during this time.
If you are using the ceiling fan light kit, ensure the screws securing the glassware are tight. Check that the light
bulbs are also secure.
□□ Ensure the canopy is a short distance from the ceiling. It should not touch the ceiling.
□□ Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box.
15
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Questions, problems, missing parts? Before returning to the store,
call Home Depot Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday.
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.
16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00
Create Date                     : 2017:03:02 14:34:20-05:00
Metadata Date                   : 2017:03:02 14:34:27-05:00
Modify Date                     : 2017:03:02 14:34:27-05:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:8e92b4d2-b19d-014f-9619-1e2a106a0dcb
Original Document ID            : xmp.did:01801174072068119109F4B9CDF54212
Document ID                     : xmp.id:beeebb73-f58a-43ca-8c53-325a7f14365e
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:04d1855b-5088-49a5-9b62-ba3cf1b044e5
Derived From Document ID        : xmp.did:26c48f36-3089-4a09-b415-1113dbc4f0b2
Derived From Original Document ID: xmp.did:01801174072068119109F4B9CDF54212
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2017:03:02 14:34:20-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 16
Creator                         : Adobe InDesign CC 2015 (Macintosh)

EXIF Metadata provided by EXIF.tools