King of Fans 52WWDIVC2 52 inch Windward IV User Manual
King of Fans, Inc. 52 inch Windward IV
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3118904 |
| Application ID | Ungp/q/hrXfsA9nIRZ+EaA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 335.18kB (4189749 bits) |
| Date Submitted | 2016-08-31 00:00:00 |
| Date Available | 2016-09-05 00:00:00 |
| Creation Date | 2016-08-25 16:51:56 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-08-31 12:04:59 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2015 (Macintosh) |
Item #1000 020 187, 458 301, 458 611, 458 633 Model #99966, 99963, 99961, 99962 UL Model #52-WWDIV USE AND CARE GUIDE WINDWARD IV 52-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection! Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 15 Warranty................................................................................ 3 Care and Cleaning.............................................................. 16 Pre-Installation..................................................................... 3 Troubleshooting.................................................................. 16 Installation............................................................................. 6 Safety Information READ AND SAVE THESE INSTRUCTIONS. WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades. 1. To reduce the risk of electric shock, ensure the electricity has been turned off at the circuit breaker or fuse box before you begin. 2. All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support of 35lbs. (15.9 Kg) or less” and use screws provided with the outlet box. 3. The outlet box and support structure must be securely mounted and capable of reliably supporting 35 lbs. (15.9 kg). Use only UL Listed outlet boxes marked “Acceptable for Fan Support of 35 lbs. (15.9 kg) or less.” WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. 4. The fan must be mounted with a minimum of 7 ft (2.1 m) clearance from the trailing edge of the blades to the floor. 5. Do not operate the reversing switch while the fan blades are in motion. You must turn the fan off and stop the blades before you reverse the blade direction. 6. Do not place objects in the path of the blades. 7. Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL-listed and marked suitable for use with the model fan you are installing. Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly. 8. 9. WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. WARNING: Electrical diagrams are for reference only. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan. WARNING: To reduce the risk of fire or electric shock, this fan should only be used with fan speed control part no. MR140A manufactured by Satellite Electric Co., LTD or control part no. AC8.3.T. manufactured by Chia Wei Electric Co., LTD. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box. CAUTION: To reduce the risk of personal injury, use only the screws provided with the outlet box. CAUTION: To avoid personal injury or damage to the fan and other items, use caution when working around or cleaning the fan. All setscrews must be checked and retightened where necessary before installation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier warrants the light kit, excluding glass, to be free from defects in workmanship and material at the time of shipment from the factory for a period of three years after the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installation, or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Home Decorators Collection hereby disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer. Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators. Pre-Installation SPECIFICATIONS Size Speed Volts Low 52 in. Medium 120 High Airflow CFM Fan Power Consumption (Without Lights) WATT Airflow Efficiency (Higher Is Better) CFM/WATT XXXX XX XXX XXXX XX XXX XXXX XX XXX Net Weight Gross Weight Cube Feet 20.2 lbs (9.2 kgs) 23.1 lbs (10.5 kgs) 1.7 ft. NOTE: These are approximate measures. They do not include the Amps and Wattage used by the light kit. TOOLS REQUIRED Phillips screwdriver Flat blade screwdriver Adjustable wrench Electrical tape Wire cutter Step ladder HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA Part Description BB CC Quantity AA Blade attachment screws 16 BB Wire connecting nut CC Rubber Gasket Pre-Installation (continued) PACKAGE CONTENTS 1 2 3 4 ON DIP Part Description Quantity Slide-on mounting bracket (inside canopy) Ball/downrod assembly Part Description Quantity Decorative motor collar cover Blade Glass bowl Canopy with canopy ring attached Light kit fitter assembly Fan-motor assembly Receiver Light kit pan Remote (batteries included) IMPORTANT: This product and/or components are governed by one or more of the following U.S. Patents: 5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117 and other patents pending. HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Installation MOUNTING OPTIONS NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling. The maximum angle allowable is 30° away from horizontal. WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support of 35lbs. (15.9 Kg) or less” using the screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician. Hanger Bar If your ceiling fan does not have an existing UL-listed mounting box, then install one using the following instructions: □□ Disconnect the power by removing the fuses or turning off the circuit breakers. □□ Secure the outlet box directly to the building structure. Outlet Box Use the appropriate fasteners and materials. The outlet box and its bracing must be able to fully support the weight of the moving fan (at least 35 lbs.). Do not use a plastic outlet box. The illustrations below show three different ways to mount the outlet box. If the canopy touches the downrod, then remove the decorative canopy bottom cover, and turn the canopy 180° before attaching the canopy to the mounting plate. To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger bar as shown above (available at any Home Depot store). Outlet Box Outlet Box Provide Strong Support Recessed Outlet Box Ceiling Mounting Plate Assembly - Standard Ceiling Mount Preparing for mounting □□ Remove the canopy ring (FF) from the canopy (C) by turning □□ □□ □□ Route the wires exiting the top of the fan motor (D) into the decorative motor collar cover (F) and through the canopy ring (FF). the ring counter-clockwise until it unlocks. Remove the mounting bracket (A) from the canopy (C) by loosening the two canopy screws (JJ) located in the “L shaped” slots. Remove and save the two canopy screws (II) in the round holes. This will enable you to remove the mounting bracket (A). JJ Routing the wires □□ Make sure the slot openings are on top and route the wires through the canopy (C) and then through the ball/ downrod assembly (B). FF II FF Assembling the fan CAUTION: To ensure wobble-free operation and to avoid damage to the fan, the downrod (B) and the setscrew (DD) must be completely tightened NOTE: This fan is equipped with a safety tab (EE). Should the setscrew (DD) ever become loose while the fan is running in reverse, the safety tab (EE) will engage and stop the fan from falling. □□ Loosen, but do not remove the setscrew (DD) on the motor collar □□ □□ (M) on top of the fan-motor assembly (D) by turning it counterclockwise. Install the downrod (B) by inserting it into the motor collar (M), and turning it clockwise until it is tight. Re-tighten the setscrew (DD) on the motor collar (M) on top of the fan-motor assembly (D) by turning it counterclockwise. DD EE HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Assembly - Close-To-Ceiling Mount Close-to-Ceiling Mounting □□ Remove the canopy ring (FF) from the canopy (C) by turning the □□ □□ □□ □□ Remove three of the six screws and lock washers (every other ring counter-clockwise until it unlocks. Remove the mounting bracket (A) from the canopy (C) by loosening the two canopy screws (JJ) located in the “L shaped” slots. Remove and save the two canopy screws (II) in the round holes. This will enable you to remove the mounting bracket (A). Remove the decorative canopy bottom cover (L) from the canppy (C) by depressing the three studs. JJ Routing the wires □□ □□ II one) securing the motor collar (M) to the top of the fan motor housing (D). Place the rubber gasket (CC) over the remaining three screws, route the wires exiting the top of the fan motor through the canopy ring (FF) (make sure the slot opening is on top), then proceed to place the ceiling canopy (C) over the collar at the top of the motor (D). Align the mounting holes with the holes in the motor (D) and fasten, using the three screws and lock-washers removed previously. Tighten the mounting screws securely. CC FF FF Assembly - Hanging the Fan Attaching the fan to the electrical box WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support of 35lbs. (15.9 Kg) or less” using the screws provided with the outlet box. □□ Pass the 120-Volt supply wires through the center hole in the □□ □□ Hanging the fan WARNING: The hook as shown is only to balance the fan while attaching wiring. Failure to hang as shown may result in hook breaking, causing the fan to fall. The hook must pass from inside to the outside of the canopy. □□ Carefully lift the fan motor assembly (D) up to the mounting mounting bracket (A). Install the ceiling mounting bracket on the outlet box by sliding the mounting bracket (A) over the two screws (UU) provided with the outlet box. If necessary, use leveling washers (not included) between the mounting bracket (A) and the outlet box. Note that the flat side of the mounting bracket (A) is toward the outlet box. When using close-to-ceiling mounting, it is important that the mounting bracket be level. Securely tighten the two mounting screws (UU). bracket (A). □□ Seat the hanger ball portion of the ball/downrod assembly (B) in the mounting bracket socket. Ensure that the tab on the mounting bracket (A) socket is properly seated in the groove in the hanger ball. If using close-to-ceiling mounting, hang the fan on the hook provided by utilizing one of the holes at the outer rim of the ceiling canopy (C). Standard mount. UU Close to ceiling mount. XX FF UU FF Assembly - Hanging the Fan (continued) Setting the remote control codes NOTE: The frequencies on your receiver and hand unit have been preset at the factory. Before installing the receiver, make sure the dip switches on the receiver and hand unit are set to the same frequency. The dip switches on the hand unit are located inside the battery compartment. WARNING: To reduce the risk of fire or electric shock, remember to disconnect power. The electrical wiring must meet all local and national electrical code requirements. The electrical source and fan must be 110/120 volt, 60Hz. Do not use this product in conjunction with any variable wall control. Incorrect wire connection can damage this receiver. NOTE: The battery will weaken with age and should be replaced before leaking takes place as this will damage the hand unit. Dispose of the used battery properly and keep the battery out of the reach of children. CAUTION: If other fan wires are a different color, have this unit installed by a licensed electrician. CAUTION: Do not install the receiver in a damp location or immerse in water (For indoor use only). Do not pull on or cut the receiver leads shorter. Do not drop or bump the unit. NOTE: It is imperative that the code used for both transmitter and receiver is exactly the same, otherwise remote controller will not work. □□ Position the house supply wires (AAA) to one side of the □□ Setting the Code on the Remote □□ Remove the battery cover on the back of the remote control □□ □□ □□ □□ □□ □□ □□ □□ Installing the receiver □□ (K) by pressing firmly on the arrow and sliding the cover off. Slide the code switches to your choice of either up or down. The factory setting is up. From the factory, the remote displays °F, slide the dip switch °C/°F to display °C. For fans with incandescent bulbs, slide the dip switch O/D to the position marked “D”, if you are not using incandescent bulbs slide the dip switch to the “O” position. Install 2 AAA batteries (included). Replace the battery cover on the remote control (K). Setting the Code on the Receiver Slide the code switches on the receiver (J) to the same positions as set on the remote control (A). Insert the silicone rubber stopper (OO) into the hole on the receiver (J) to cover the dip switches. AAA OO ON MADE IN CHINA HECHO EN CHINA BBB MODEL: TR222A FCC ID: KUJCE10320 IC ID:10786A-TR222A MODELO: TR222A FCC ID: KUJCE10320 IC ID: 10786A-TR222A slide-on mounting bracket (A); position the fan wires (BBB) to the opposite side. Insert the narrow end of the receiver (J) (as shown, flat side towards the ceiling) into the slide-on mounting bracket until it rests on top of the ball/downrod assembly. °C/°F MODè LE: TR222A FCC ID: KUJCE10320 IC ID: 10786A-TR222A 1 2 3 4 ON DIP FABRIQUé EN CHINE ZZ ON WARNING:The remote must be stored in a dry location when not in use. ADVERTENCIA:El control remoto deberia estar guardado en una lugar seco cuando no esta en uso. HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Assembly - Hanging the Fan (continued) Wiring the receiver to the household wiring WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. WARNING: Each wire not supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use. IMPORTANT: Use the wire connecting nuts (BB) supplied with your fan. Secure the connectors with electrical tape and ensure there are no loose strands or connections. □□ Spread the wires apart so that the green and white wires □□ □□ □□ □□ are on one side of the outlet box and the black wire is on the other side. Connect the green fan wires to the household ground wire (this may be a green or bare wire) using a wire connecting nut (BB). Connect the receiver black (or red) wire to the household black (hot) wire using a wire connecting nut (BB). Connect the receiver white wire to the household white wire (neutral) wire using a wire connecting nut (BB). Secure each wire connecting nut using electrical tape. Outlet Box in the ceiling (LL) Green (or Bare) Black Black (or Red) White BB (x3) Green White Receiver Antenna ON DIP 1 2 3 4 Receiver (J) 10 Assembly - Hanging the Fan (continued) Making the electrical connection WARNING: Each wire not supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use. Outlet box in the ceiling (LL) IMPORTANT: Use the plastic wire connectors (BB) supplied with your fan. Secure the connectors with electrical tape and ensure there are no loose strands or connections. Green Receiver (J) NOTE: The fan comes with 54 in. lead wires for use with an extended ball/downrod assembly. If using the 6 in. ball/downrod assembly (B) provided, you can cut the lead wires to your desired length (no shorter than 12 in.). Receiver Antenna □□ The fan comes with 54 in. lead wires for use with an □□ □□ □□ □□ □□ extended ball/downrod assembly. If using the 6 in. ball/ downrod assembly (B) provided, you can cut the lead wires to your desired length (no shorter than 12 in.) This will make extra room in the canopy (C), if you do not wish to cut the wires, you will need to neatly wrap them. Connect the fan motor white wire to the receiver white wire using a wire connecting nut (BB). Connect the fan motor black wire to the receiver black wire using a wire connecting nut (BB). Connect the fan motor blue wire to the receiver blue wire using a wire connecting nut (BB). Secure each wire connecting nut using electrical tape. Turn the wire connecting nut (BB) upward and push the wiring into the outlet box (LL). ON DIP 1 2 3 4 Blue Black White BB (x3) 11 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Assembly - Hanging the Fan (continued) 10 Wrapping the extra wire WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball. Failure to properly seat the tab in the groove could cause damage to the wiring. NOTE: Follow this step ONLY if you did not cut the extra length off from the wires coming from the ceiling fan to the receiver. □□ Gently wrap the excess wire around the mounting bracket, □□ Mounting the fan □□ Align the locking slots of the ceiling canopy (C) with the two under the receiver. Secure with electrical tape. screws (JJ) in the mounting bracket (A). Push up to engage the slots and turn clockwise to lock in place. Firmly tighten the two mounting screws (JJ). Install the two mounting screws (II) (saved from Assembly Step 1 “Prepairing for mounting”) into the holes in the canopy (C) and tighten firmly. Install the decorative canopy ring (FF) by aligning the ring’s slots with the screws in the canopy (C). Rotate the ring clockwise to lock in place. □□ □□ □□ II JJ FF 12 Assembly - Hanging the Fan (continued) 11 12 Close-to-Ceiling mounting WARNING: The locking slots of the celling canopy are provided only as an aid to mounting. Do not leave the fan assembly unattended until all four canopy screws are engaged and firmly tightened. □□ Attach a blade (G) to the fan motor housing (D) by first □□ Carefully unhook the fan from the mounting bracket (A) and □□ □□ □□ align the locking slots of the ceiling canopy (C) with the two screws in the mounting bracket (A). Push up to engage the slots and turn clockwise to lock the canopy (C) in place. Immediately tighten the two mounting screws (JJ) firmly. Install the remaining two mounting screws (II) into the holes in the canopy (C) and tighten firmly. Install the decorative canopy ring (FF) by aligning the ring’s slots with the screws in the canopy (C). Rotate the ring counter-clockwise to lock it in place. II Attaching the fan blades □□ □□ inserting the blade (G) into the slot in the side of the fan motor housing (D). Insert a screw (AA) into the bracket. Repeat for the two remaining screws. Tighten each screw (AA) securely. Repeat these steps for the remaining blades (G). JJ FF AA 13 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Assembly - Installing the Light Kit Attaching the light kit pan □□ Remove one screw (NN) from the black bracket below the □□ □□ □□ Attaching the light kit fitter assembly CAUTION: To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan before installing the light kit. fan motor assembly (D). Loosen, but do not remove the other two screws. Push the light kit pan (E) up to the fan motor assembly (D) so that the two loosened screw heads fit into the keyhole slots. Turn the light kit pan (E) to secure. Re-install the screw that was removed in step 1. Make sure all the screws are firmly tightened. □□ Remove one screw (SS) from the light kit pan (E). Loosen, but do not remove the other two screws. □□ Connect the blue wire exiting the bottom of the fan motor □□ □□ □□ assembly (D) with the black wire from light kit fitter assembly (I). Push the light kit fitter assembly (I) up to the light kit pan (E) so that the two loosened screw heads fit into the keyhole slots. Turn the light kit fitter assembly (I) to secure. Re-install the screw that was removed in step 1. Make sure all the screws are firmly tightened. NN SS Installing the glass bowl WARNING: Do not overtighten when installing the glass shade into the light kit assembly. Allow the glass shade to cool completely before removing. □□ Place the glass bowl (H) into the light kit pan (E), aligning □□ the three flat areas on the top flange of the glass bowl (H) with the three raised dimples in the light kit pan (E). Turn the glass bowl(H) clockwise until it stops. 14 Operation CAUTION: This device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by the manufacturer could void your authority to operate this equipment. Remote Control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan. The appropriate speed settings for warm or cool weather depends on factors such as the room size, ceiling height, and number of fans. NOTE: The reverse switch is located at the top of motor housing. Shut the fan off then wait until the blades have completely stopped before flipping the switch to reverse the direction of your ceiling fan. Warm weather - (Forward) A downward airflow creates a cooling effect. This allows you to set your air conditioner on a warmer setting without affecting your comfort. Cool weather - (Reverse) An upward airflow moves warm air off of the ceiling. This allows you to set your heating unit on a cooler setting without affecting your comfort. Remote Operation Operating the remote control - Press and release the button to turn the fan and the lights on or off. □□ Press and hold the button for 3 seconds to use the “walk away time delay”; this will activate the light for 30 seconds (if you are using dimmable bulbs the light will be activated at 50% brightness). - Press and release 1 time - turns the fan on high speed. - Press and release 2 times - turns the fan on medium speed. - Press and release 3 times - turns the fan on low speed. - Press and release 4 times - turns the fan off. - Press and release the button to enable Comfort BreezeTM; this will change your fan speed randomly, simulating a relaxing breeze. To cancel this feature press or . - While the fan is on press 1 time - turns on a 2 hour run timer. - While the fan is on press 2 times - turns on a 4 hour run timer. - While the fan is on press 3 times - turns on an 8 hour run timer. - This setting allows the fan to automatically turn on and off at a previously set room temperature. - Press 1 time to adjust the set temperature + 1°, press and hold to raise the set temperature multiple degrees. - Press 1 time to adjust the set temperature - 1°, press and hold to lower the set temperature multiple degrees. - Digital display shows the set temperature when - Press and release the or is pressed. button to turn the light on or off. If you are using dimmable bulbs and you have previously set O/D dip switch in your remote to the “D” position, press and hold the button to activate the dimmer function. 15 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage □□ □□ the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing. You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a light application of shoe polish. You do not need to oil your fan. The motor has permanently-lubricated sealed ball bearings. Troubleshooting Problem Solution The fan will not start □□ □□ □□ □□ □□ The fan is noisy □□ □□ □□ □□ □□ The fan wobbles □□ Check that all blade and blade arm screws are secure. □□ Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades. Measure from a point on the center of the blade to the point on the ceiling. Rotate the fan until the next blade is positioned for measurement, and measure from the same point on each blade to the ceiling. Repeat for each blade. Any measurement deviation should be within 1/8 in. Run the fan for ten minutes. If the fan continues to wobble please contact Hampton Bay Customer Service and a balancing kit will be sent to you at no charge. Check the main and branch circuit fuses or breakers. Check the line wire connections to the fan and switch wire connections in the switch housing. Check the battery in the remote control. Ensure you are in the normal range of 10-20 feet. Turn the power off and ensure that the dip switch settings are the same on the remote control and receiver. Ensure all motor housing screws are snug. Ensure the screws that attach the fan blade bracket to the motor hub are tight. Ensure the wire nut connections are not rattling against each other or the interior wall of the switch housing. Allow a 24-hour “breaking in” period. Most noises associated with a new fan disappear during this time. If you are using the Ceiling Fan light kit, ensure the screws securing the glassware are tight. Check that the light bulbs are also secure. □□ Ensure the canopy is a short distance from the ceiling. It should not touch the ceiling. □□ Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box. 16 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Questions, problems, missing parts? Before returning to the store, call Home Depot Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Has XFA : No Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Create Date : 2016:08:25 16:51:56-04:00 Metadata Date : 2016:08:31 12:04:59+08:00 Modify Date : 2016:08:31 12:04:59+08:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:c3c0eed8-669a-4c04-8876-068f1d06fa08 Original Document ID : xmp.did:01801174072068119109F4B9CDF54212 Document ID : xmp.id:af15ff85-be8a-486d-90b7-79ace1e3743c Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:5fa0cd21-b347-4098-8156-d23bc51ef0e1 Derived From Document ID : xmp.did:CB517E7407206811822AE4F6D7511A52 Derived From Original Document ID: xmp.did:01801174072068119109F4B9CDF54212 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:08:25 16:51:56-04:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 17 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools