King of Fans 68ATRDCR 68 inch Altura User Manual
King of Fans, Inc. 68 inch Altura
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2960402 |
| Application ID | VQfxjwXORy7cv8dmFG6gyg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 254.45kB (3180651 bits) |
| Date Submitted | 2016-04-15 00:00:00 |
| Date Available | 2016-04-16 00:00:00 |
| Creation Date | 2016-04-11 10:45:20 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2016-04-11 10:45:31 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS6 (Macintosh) |
Item #1000 xxx xxx Model #68681, 68682, 68683, 68684, 68685 ETL Model #68-ATRDC P1 USE AND CARE GUIDE ALTURA 68-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection! Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 12 Warranty................................................................................ 3 Care and Cleaning.............................................................. 14 Pre-Installation..................................................................... 3 Troubleshooting.................................................................. 14 Installation............................................................................. 6 Safety Information READ AND SAVE THESE INSTRUCTIONS. 1. 2. 3. To reduce the risk of electric shock, ensure the electricity has been turned off at the circuit breaker or fuse box before you begin. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 50 lbs. (22.7 kg). Use only UL-listed outlet boxes marked “Acceptable for Fan Support of 50 lbs. (22.7 kg) or less.” 4. The fan must be mounted with a minimum of 7 ft (2.1 m) of clearance from the trailing edge of the blades to the floor. 5. Do not place objects in the path of the blades. 6. To avoid personal injury or damage to the fan and other items, use caution when working around or cleaning the fan. 7. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box. 8. WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades. WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. (15.9 Kg) or less”, and use screws provided with the outlet box. WARNING: Electrical diagrams are for reference only. If you are using a light kit, refer to the light kit instructions manual to make the electrical connections. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan. WARNING: To reduce the risk of fire or electric shock, this fan should only be used with fan speed control part no. RH786NR, manufactured by Rhine. CAUTION: To reduce the risk of personal injury, use only the screws provided with the outlet box. All set screws must be checked and retightened where necessary before installation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper installation or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Home Decorators Collection hereby disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer. Contact the Customer Service Team at 1-800-986-3460 or visit www.HOMEDEPOT.COM/HOMEDECORATORS. Pre-Installation SPECIFICATIONS Size 68 in. Fan Power Consumption (without lights) WATT Airflow CFM Airflow Efficiency (Higher Is Better) CFM/WATT xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xx xxxx xxxx xx xxxx xxxx xx xxxx xxxx xx xxxx xxxx Speed Volts 120 Net Weight Gross Weight Cubic Feet xx lbs (xx kgs) xx lbs (xx kgs) xx cu.ft. NOTE: These are approximate measures. They do not include the Amps and Wattage used by the light kit. HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Pre-Installation (continued) TOOLS REQUIRED Phillips screwdriver Flat blade screwdriver Adjustable wrench Wire cutter / stripper Electrical tape Step ladder HARDWARE INCLUDED NOTE: Hardware should be packaged in a blister pack. NOTE: Hardware not shown to actual size. BB AA Part Description Quantity AA Blade attachment screws 15 BB Plastic wire connecting nut CC Decorative nut 15 CC Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity Slide-on mounting bracket (inside canopy) Ball/downrod assembly Part Description Quantity Switch cup Decorative motor collar cover Blade Canopy with canopy ring attached Switch cup adaptor Fan-motor assembly Transmitter (battery included) IMPORTANT: This product and/or components are governed by one or more of the following U.S. Patents: 5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117 and other patents pending. HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 50 lbs. (22.7 kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician. NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling. The maximum angle allowable is 30° away from horizontal. Hanger Bar If your ceiling fan does not have an existing UL-listed mounting box, then install one using the following instructions: □□ Disconnect the power by removing the fuses or turning off the circuit breakers. □□ Secure the outlet box directly to the building structure. Use Outlet Box the appropriate fasteners and materials. The outlet box and its bracing must be able to fully support the weight of the moving fan (at least 50 lbs.). Do not use a plastic outlet box. The illustrations below show three different ways to mount the outlet box. If the canopy touches the downrod, then remove the decorative canopy bottom cover, and turn the canopy 180° before attaching the canopy to the mounting plate. To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger bar as shown above (available at any Home Depot store). Outlet Box Outlet Box Provide Strong Support Recessed Outlet Box Ceiling Mounting Plate Assembly - Standard Ceiling Mount Preparing for mounting □□ Remove the canopy ring (L) from the canopy (C) by turning □□ □□ Routing the wires □□ Route the wires exiting the top of the fan motor (D) into the decorative motor collar cover (F) and through the canopy ring (L). the ring to the right until it unlocks. Remove the mounting bracket (A) from the canopy (C) by loosening the two screws (HH) located in the “L shaped” slots Remove and save the two non-slotted screws (SS) in the round holes. This will enable you to remove the mounting bracket (A). □□ Make sure the slot openings are on top and route the wires through the canopy (C) and then through the ball/ downrod assembly (B). HH SS Assembling the fan CAUTION: To ensure wobble-free operation and to avoid damage to the fan, the downrod (B) and the setscrew (II) must be completely tightened NOTE: This fan is equipped with a safety tab (EE). Should the setscrew (II) ever become loose while the fan is running in reverse, the safety tab (EE) will engage and stop the fan from falling. □□ Loosen but do not remove the setscrew (II) by turning it □□ □□ FF counterclockwise. Install the downrod (B) by inserting it into the motor collar (FF), and turning it clockwise until it is tight. Re-tighten the setscrew (II) on the motor collar (FF) on top of the fan motor assembly (D) by turning it clockwise. II EE HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Assembly - Hanging the Fan Attaching the fan to the electrical box □□ Carefully lift the fan motor assembly (D) up to the mounting WARNING: To reduce the risk fo fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support of 50 lbs. (22.7 kg) or less”, and use screws provided with the outlet box. bracket (A). □□ Seat the hanger ball portion of the ball/downrod assembly (B) in the mounting bracket (A) socket. Ensure that the tab on the mounting bracket (A) socket is properly seated in the groove in the hanger ball. □□ Pass the 120-Volt supply wires through the center hole in the □□ □□ Hanging the fan mounting bracket (A). Install the ceiling mounting bracket (A) on the outlet box (OO) by sliding the mounting bracket (A) over the two screws (TT) provided with the outlet box (OO). If necessary, use leveling washers (not included) between the mounting bracket (A) and the outlet box (OO). Note that the flat side of the mounting bracket (A) is toward the outlet box (OO). Securely tighten the two mounting screws (TT). OO TT Assembly - Hanging the Fan (continued) Making the electrical connection Outlet box in the ceiling (OO) WARNING: Each wire not supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use. Black IMPORTANT: Use the plastic wire connectors (BB) supplied with your fan. Secure the connectors with electrical tape and ensure there are no loose strands or connections. Black White White Green or Bare Green NOTE: The fan comes with 78 in. lead wires for use with an extended ball/downrod assembly. If using the 18 in. ball/downrod assembly (B) provided, you can cut the lead wires to your desired length. □□ The fan comes with 78 in. lead wires for use with an extended □□ □□ □□ □□ □□ ball/downrod assembly. If using the 18 in. ball/downrod assembly (B) provided, you can cut the lead wires to your desired length. This will make extra room in the canopy (C), if you do not wish to cut the wires, you will need to neatly wrap them. Connect the fan motor green wires to the household green or bare wire using a wire connecting nut (BB). Connect the fan motor white wire to the household white wire using a wire connecting nut (BB). Connect the fan motor black wire to the household black wire using a wire connecting nut (BB). Secure each wire connecting nut using electrical tape. Turn the wire connecting nuts (BB) upward and push the wiring into the outlet box (OO). For Light Kit HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Assembly - Hanging the Fan (continued) Wrapping the extra wire Mounting the fan-motor assembly (standard mount) WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball. Failure to properly seat the tab in the groove could cause damage to the wiring. NOTE: Follow this step ONLY if you did not cut the extra length off from the wires coming from the ceiling fan. □□ Gently wrap the excess wire around the mounting bracket. □□ Secure with electrical tape. WARNING: The locking slots of ceiling canopy are provided only as an aid to mounitng. Do not leave the fan assembly unattached until all four canopy screws are engaged and firmly tightened. □□ Align the locking slots of the ceiling canopy (C) with the two □□ □□ □□ screws (HH) in the slide-on mounting bracket (A). Push up to engage the slots, and turn clockwise to lock the canopy (C) in place. Firmly tighten the two mounting screws (HH). Install the two mounting screws(saved from assembly step 1 “Preparing for mounting” into the holes in the canopy (C) and tighten firmly. Install the decorative canopy ring (L) by aligning the ring’s slots with the screws in the canopy (C). Rotate the canopy ring (L) counter-clockwise to lock it in place. HH 10 Assembly - Hanging the Fan (continued) Attaching the fan blades CC □□ Attach blade (G) to blade bracket (J) using the decorative □□ □□ nuts (DD) and blade attachment screws (CC) provided. Insert a blade attachment screw (CC) through a hole in the blade (G) and the blade bracket (J) and into the decorative nut (DD). Repeat for the two remaining holes in the blade (G). Tighten each screw (CC) securely. Repeat these steps for the remaining blades. DD Assembly - Attaching the accessories Attaching the switch cup adaptor □□ Remove one screw (QQ) from the black bracket below the □□ □□ □□ fan motor assembly (D). Loosen, but do not remove the other two screws. Align the key hole slots in the switch cup adaptor (H) with the two screws in the black bracket. Turn the switch cup adaptor (H) clockwise until the two screws are situated in the narrow end of the keyholes. Re-install the one screw (QQ) that was removed in first step. Tighten all three screws firmly. QQ Attaching the switch cup □□ Remove one screw (UU) from the switch cup adaptor (H). □□ □□ Loosen but do not remove the other two screws (UU). Aligning the “L” shape holes on the switch cup (E) with the screws on the switch cup adaptor (H). Turn the switch cup (E) to hold it in position. Install the other screw (UU) that was removed in the first step. Tighten all three screws (UU) securely. UU 11 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Setting the Code and Learning Process Setting the light function on your remote □□ Remove the battery cover by pressing firmly on the arrow and sliding the cover off. LEARN 0 1 NOTE: The switch marked ON/DIM controls the dimming function of the lights: If using non-dimmable bulbs, use a ballpoint pen or small screwdriver to set the switch to ON to disable the dimming function. If using dimmable bulbs, set the switch to DIM to enable the dimming function. LEARN 0 1 NOTE: The battery will weaken with age and should be replaced before leaking takes place as this will damage the remote control. Dispose of used battery properly and keep the battery out of the reach of children. □□ If you are using dimmable bulbs, slide the dip switch from “on” to “dim” (for non-dimmable bulbs, the dip switch must be set to “on”. □□ Install two 1.5V AAA batteries (included). □□ Replace the battery cover on the remote control. To change a dip switch setting LED bar Scale indicating fan speed □□ Slide the switch inside the battery compartment to “1”. □□ Turn off power to the fan, then turn on the power. □□ Within 30 seconds of restoring power, tap the “learn” key on the back of the remote control. If learning is successful, the fan light will blink three times and turn on. Fan on/off Increases fan speed Decreases fan speed TM Comfort Breeze Warm weather (Forward) Timer Cool weather (Reverse) Decreases the light level (Dimmer) Increases the light level (Dimmer) Light on/off 12 Operating Your Fan and Remote Control 1. Fan button. - Press and release the button to turn the fan on or off. □□ Press and hold the button for 5 seconds to enter the learning function. □□ Fan on. The fan memory function will resume the speed set on the fan prior to the power being turned off. The LED bar will display the current settings for 5 seconds after the button is released. □□ Fan off. The fan memory function will store the current setting for the next time the fan is in use. Note: If you are currently using Comfort BreezeTM mode, button will cancel Comfort BreezeTM mode pressing the and resume normal fan operation. Note: You must turn the fan on prior to using the timer function. 2. Speed functions + button, increases the fan speed □□ Pressing and releasing the + button one time will increase the speed of the fan. Each setting increase will cause the LED bar to illuminate slightly more, until the fan has reached the maximum speed setting, at that time the LED bar will be fully illuminated. □□ Pressing and holding the + button will increase the fan speed automatically through the speed settings and the increments will be denoted on the LED bar. When the LED bar is fully illuminated, the fan has reached maximum speed setting. □□ Pressing the + button while in Comfort BreezeTM mode, will automatically cancel the Comfort BreezeTM mode and resume normal fan operation. – button, decreases fan speed □□ Pressing and releasing the - button one time will decrease the speed of the fan. Each setting decrease will cause the LED bar to dim slightly more, until the fan has reached the minimum speed setting, at that time the LED bar will be approximately 25% illuminated. □□ Pressing and holding the - button will decrease the fan speed automatically through the speed settings and the increments will be denoted on the LED bar. When the LED bar is 25% illuminated, the fan has reached the minimum speed setting. □□ Pressing the - button while in Comfort BreezeTM mode, will automatically cancel the Comfort BreezeTM mode and resume normal fan operation. 3. Comfort BreezeTM There are three Comfort BreezeTM settings. Pressing the button will activate the Comfort BreezeTM mode and LED bar will illuminate slowly from bottom to top to display the current setting. Setting 1: Alternates through speeds 1 – 3, the LED bar should fill approximately 33%. Setting 2: Alternates through speeds 1 – 6, the LED bar should fill approximately 66%. □□ □□ □□ Setting 3: Alternates through speeds 1 – 9, the LED bar should be fully illuminated. Off Setting 1 Setting 2 Setting 3 Disable Comfort BreezeTM 13 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. Operating Your Fan and Remote Control 4. Timer □□ Pressing the timer button will automatically turn fan and light (if light is on) off after 2, 4, or 8 hours. When you activate the timer mode, the LED to the left of the time above the clock will illuminate. Off 2H 4H 8H Disables timer 5. Fan reverse button (Must be pushed when the fan is in operation) □□ Warm weather: LED bar will illuminate and the lights will flow from high to low. □□ Cool weather: LED bar will illuminate and the lights will flow from low to high. 6. Light (If your fan is equipped with a light kit) □□ Press and release the light button to turn the light on or off □□ Light on: The fan memory function will resume the light setting (on or off and dim) on the fan prior to the power being turned off. 7. Dimmer. (The dimmer function is for use with dimmable bulbs only) □□ Press to increase desired light level. □□ Press to decrease the desired light level. A. Warm weather Remote Control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan. Speed setting for warm or cool weather depend on factors such as the room size, ceiling height, number of fans and so on. A. Warm weather - (Forward) A downward airflow creates a cooling effect. This allows you to set your air conditioner on a higher setting without affecting your comfort. B. Cool weather - (Reverse) An upward airflow moves warm air off of the ceiling. This allows you to set your heating unit on a lower setting without affecting your comfort. NOTE: Do not wait for the fan to stop before pressing the reverse button. The fan will not reverse direction if the fan is not moving. 14 B. Cool weather Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage □□ □□ the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish. You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a light application of shoe polish. You do not need to oil your fan. The motor has permanently-lubricated sealed ball bearings. Troubleshooting Problem Solution The fan will not start □□ □□ □□ □□ □□ The fan is noisy □□ □□ □□ □□ □□ The fan wobbles □□ Check that all blade and blade arm screws are secure. □□ Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades. Measure from a point on the center of the blade to the point on the ceiling. Rotate the fan until the next blade is positioned for measurement, and measure from the same point on each blade to the ceiling. Repeat for each blade. Any measurement deviation should be within 1/8 in. Run the fan for ten minutes. If the fan continues to wobble please contact Home Decorators Collection Customer Service and a balacing kit will be sent to you at no charge. Check the main and branch circuit fuses or breakers. Check the line wire connections to the fan and switch wire connections in the switch housing. Check the battery in the remote control. Ensure you are in the normal range of 10-20 feet. Remember to turn off the power supply before checking the dip switch settings. Ensure all motor housing screws are snug. Ensure the screws that attach the fan blade bracket to the motor hub are tight. Ensure the wire nut connections are not rattling against each other or the interior wall of the switch housing. Allow a 24-hour “breaking in” period. Most noises associated with a new fan disappear during this time. If you are using the Ceiling Fan light kit, ensure the screws securing the glassware are tight. Check that the light bulbs are also secure. □□ Ensure the canopy is a short distance from the ceiling. It should not touch the ceiling. □□ Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box. 15 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Questions, problems, missing parts? Before returning to the store, call Home Depot Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2016:04:11 10:45:20-04:00 Metadata Date : 2016:04:11 10:45:31-04:00 Modify Date : 2016:04:11 10:45:31-04:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:227bf9e9-01d1-5242-a27a-f9390e9ac783 Original Document ID : xmp.did:01801174072068119109F4B9CDF54212 Document ID : xmp.id:B86C17F611206811822AA312BDEEA098 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:22D1A0EE11206811822AA312BDEEA098 Derived From Document ID : xmp.did:103C019C072068118083BCB888C88A18 Derived From Original Document ID: xmp.did:01801174072068119109F4B9CDF54212 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2016:04:11 10:45:20-04:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 16 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools