KingBoard Technology KBZ818 BLUETOOTH TRANSMITTER User Manual Model No
Shenzhen KingBoard Technology Co., Ltd. BLUETOOTH TRANSMITTER Model No
User Manual
Shenzhen KingBoard Technology Co., Ltd. BLUETOOTH TRANSMITER KBZ-818 Remark 1. keep out of reach of children! 2. Please use the original accessories 3. If unit have problem , please contact with the seller. Disassemble the unit by User is not allow 4.Keep good ventilated environment when charge the unit, do not keep near inflammables , oxidizers and explosive Operation guide A:“ “ Short press: Ⅰ、 USB or SD mode: Last track Ⅱ、 Charge mode:No function Ⅲ、Bluetooth mode:change to last station Long press: Ⅰ、USB or SD mode:Decrease the volume Ⅱ、Charge mode: Decrease the volume Ⅲ、Bluetooth mode:Decrease the volume B“ “ Short press: Ⅰ、 USB or SD mode: Next track Ⅱ、Charge Mode:No function Ⅲ、Bluetooth mode:change to next station Long press: Ⅰ、USB or SD mode:Increase the volume Ⅱ、Charge mode: Increase the volume Ⅲ、Bluetooth mode:Increase the volume C. “ / “ Short press Ⅰ、USB or SD mode: Play or Pause。 Ⅱ、Aux in mode:Mute Ⅲ、Bluetooth mode:Play or Pause/ Answer or hand up the phone/Hang up Long press Ⅰ、USB or SD mode: Change the mode Ⅱ、Aux in mode:Change the mode Ⅲ、Bluetooth mode: Change the mode Function: Connect to the Bluetooth device Important noted: BLUETOOTH TRANSMITTER frequency must meet the radio frequency 1 .Put it into to Car Cigar hold, BLUETOOTH TRANSMITTER will on automatically, and will have the indicate sounds .Turn ON the Bluetooth function on your mobile or other device and search for the speaker, model name. 2. Pair the device., it can connect automatically 3. Once device is paired Bluetooth will automatically connect when unit is turned on subsequently. USB/SD Card `Insert the U flash memory or SD card into the USB or SD slot., it will read the MP3 format music automatically. Press the “ the" " and the" ” to Play/Pause, short time press "to Prev. and Next, Long time press the" "and " button to decrease and increase the Volume. Remote control Operation guide: Operation guide Remote control 1. How to play and stop 2.How adjust Volume to the 3. How to change the frequency 4. How to choose music Play Press “VOL.+” button: Increase the Volume Press “VOL.-” button: Reduce the Volume Press “CH+ ” button: Increase 0.1MHZ Press “CH-” button: Reduce 0.1MHZ Press the “ Press the “ 5. How to set EQ button ” Button: Play the next song ” Button: Play the previous song Press “EQ” button to switch your favorite EQ This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : Yes XMP Toolkit : 3.1-701 Create Date : 2016:05:04 10:13:27+08:00 Creator Tool : Microsoft® Word 2010 Modify Date : 2016:05:09 14:34:03+08:00 Metadata Date : 2016:05:09 14:34:03+08:00 Format : application/pdf Creator : Tinkpad Title : Model No Producer : Microsoft® Word 2010 Document ID : uuid:aeeca870-cf87-49f6-bfe8-e923eae35758 Instance ID : uuid:470da6ed-64e4-434c-97a3-b8e1683620ea Page Count : 4 Language : zh-CN Author : TinkpadEXIF Metadata provided by EXIF.tools