KingBoard Technology KTS-41 Bluetooth Speaker User Manual pt 1

Download:
Mirror Download [FCC.gov]
Document ID	2761565
Application ID	1Ea4gRvajfGc+8gAo/ffcA==
Document Description	User Manual pt 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.24kB (90438 bits)
Date Submitted	2015-09-24 00:00:00
Date Available	2015-09-24 00:00:00
Creation Date	2015-09-21 19:55:35
Document Lastmod	2015-09-21 19:55:35
Document Title	User Manual pt 1

User’s manual
Package Includes
1 Bluetooth speaker
2USB to Micro USB cable
3 3.5mm Auxiliary Cable
Features
Durable, shock and weather-resistant silicone wrap
On-board playback and volume controls
Auxiliary input to connect speaker with non-Bluetooth devices
Charge it




Plug the micro USB cable into the micro USB port under the silicone cover on the button
right corner of the speaker, and connect the other end of cable to either a computer USB port
or to a USB-compatible car or wall charger.
A solid red LED light will appear through the grill on the back of the speaker to indicate
when the KTS-86 is charging, even while speaker is turned off.
When charging is complete ,the red LED light will turn off.
Charging time is approximately 2 hours
Pair & Connect with a New Device






Power on the kts-86 speaker(refer to the “Turn it on” section)
The KTS-86 will emit a tone, and then LED light on the back of the speaker will begin to
flash blue as it tries to reconnect with a previous device. If it cannot reconnect, the LED light
will begin to quickly flash blue to indicate that the speaker is now ready to be paired with a
new device.
On your Bluetooth enabled smartphone, tablet or media player, navigate to the Bluetooth
setting menu, turn on the Bluetooth feature, and search for a new devices.
After a few seconds you will see “KTS-86”listed
Tap this model to select it. The LED will turn a solid blue. You are now paired, connected
and ready to play.
Alternatively you can connect any non-Bluetooth device using the included 3.5mm AUX
cable together with the AUX input located under the silicone cover the bottom right corner of
the speaker. While plugged in via the AUX input, the LED light will slowly flash blue and
Bluetooth on the speaker will automatically turn off.
Power On/Off



Press & hold the power button on the right side of the speaker for 2-3 seconds to turn on the
speaker and automatically reconnect with the last Bluetooth device.
The KTS-86 will emit a tone, and the LED light on the back of the speaker will glow blue to
indicate that the speaker is now powering on.
To turn the KTS-86 speaker off, press &hold the power button again for 2-3seconds.The
speaker will emit a tone to indicate that the KTS-86 is now powering off.
Reconnect to Bluetooth




You only need to pair your Bluetooth device with the KTS-86 once.
With your previously paired device’s Bluetooth turned on and in range, power on the
KTS-86.
The speaker will automatically reconnect to the last Bluetooth device it was connected to.
If you have a previously paired device that does not auto-reconnect, navigate to the Bluetooth
settings menu on your device, turn on the Bluetooth feature, and select “KTS-86” from your
list of paired Bluetooth devices.
Play






Connect your device to the KTS-86 over Bluetooth or through the AUX input..(refer to the
“Pair & Connect” section)
Open your favorite music app and press play.
You can control the music ,volume ,and tracks from your device, as well as control the
playback and volume from the speaker: Volume on your device and on the speaker are
controlled separately.
Press the play button to play/pause music, or to answer/end phone calls. Press the “+”or
“-“buttons to adjust volume.
Speaker will emit a tone when the maximum or minimum volume on the speaker has been
reached. If volume is still too low, you can also adjust the volume on your device.
All audio, including music, games, videos, and notifications will be routed through the
KTS-86.
Important Waterproof /Safety Information
IMPORTANT:DO NOT submerge the KTS-86 in water. This device is not intended to function
properly after being under water.
 Before using the KTS-86 in a wet environment, make sure the silicone cover over the AUX
and micro USB input ports on the back of the speaker is fully closed and secured. If water
gets into either port, the speaker may not function properly
 The speaker is rated IPX4.which means the speaker can be splashed with water or left in the
rain (but not submerged in water) for approximately 5 minutes.
 If the KTS-86 gets wet, it is recommended that you dry the speaker completely before using
it again.
 All actions done with the KTS-86 are done at your own risk. While the speaker is
weather-proof and has a protective silicone case, it is not a guarantee for complete damage
protection.
Specification
Output Power:3W
Speaker Driver Size:45mm
Impedence:4 Ω
Frequency Response: 15Hz to 18 KHz
Waterproof Level: IPX4
Battery Information:
Built-in Battery: Lithium –ion
Input: DC 5V/1A
Battery Capacity: 400mAH
Music playing time: Up to 6 hours
Standby time: Up to 24 hours
Charging time：2hours
Approximate playback time. Battery life depends on individual use and may be slightly more or
less than the time specified.
Bluetooth Information
Bluetooth Specification: V2.1+EDR
Operating Distance:10 Meters
System Requirements: Bluetooth –capable device
Additional Connection Sources:
Audio: 3.5mm AUX cable
Power Souce:Bulit-in rechargeable battery or via USB cable.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 3
Create Date                     : 2015:09:21 19:55:35+00:00
Modify Date                     : 2015:09:21 19:55:35+00:00

EXIF Metadata provided by EXIF.tools