KingBoard Technology KTS-41 Bluetooth Speaker User Manual

Shenzhen KingBoard Technology Co., Ltd. Bluetooth Speaker pt 1

a href="https://usermanual.wiki/KingBoard-Technology" itemprop="url"> KingBoard Technology >

Contents

User Manual pt 1

User’s manualPackage Includes1 Bluetooth speaker2USB to Micro USB cable3 3.5mm Auxiliary CableFeaturesDurable, shock and weather-resistant silicone wrapOn-board playback and volume controlsAuxiliary input to connect speaker with non-Bluetooth devicesCharge itPlug the micro USB cable into the micro USB port under the silicone cover on the buttonright corner of the speaker, and connect the other end of cable to either a computer USB portor to a USB-compatible car or wall charger.A solid red LED light will appear through the grill on the back of the speaker to indicatewhen the KTS-86 is charging, even while speaker is turned off.When charging is complete ,the red LED light will turn off.Charging time is approximately 2 hoursPair & Connect with a New DevicePower on the kts-86 speaker(refer to the “Turn it on” section)The KTS-86 will emit a tone, and then LED light on the back of the speaker will begin toflash blue as it tries to reconnect with a previous device. If it cannot reconnect, the LED lightwill begin to quickly flash blue to indicate that the speaker is now ready to be paired with anew device.On your Bluetooth enabled smartphone, tablet or media player, navigate to the Bluetoothsetting menu, turn on the Bluetooth feature, and search for a new devices.After a few seconds you will see “KTS-86”listedTap this model to select it. The LED will turn a solid blue. You are now paired, connectedand ready to play.Alternatively you can connect any non-Bluetooth device using the included 3.5mm AUXcable together with the AUX input located under the silicone cover the bottom right corner ofthe speaker. While plugged in via the AUX input, the LED light will slowly flash blue andBluetooth on the speaker will automatically turn off.Power On/OffPress & hold the power button on the right side of the speaker for 2-3 seconds to turn on thespeaker and automatically reconnect with the last Bluetooth device.The KTS-86 will emit a tone, and the LED light on the back of the speaker will glow blue toindicate that the speaker is now powering on.To turn the KTS-86 speaker off, press &hold the power button again for 2-3seconds.The
Download:
Mirror Download [FCC.gov]
Document ID2761565
Application ID1Ea4gRvajfGc+8gAo/ffcA==
Document DescriptionUser Manual pt 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.24kB (90438 bits)
Date Submitted2015-09-24 00:00:00
Date Available2015-09-24 00:00:00
Creation Date2015-09-21 19:55:35
Document Lastmod2015-09-21 19:55:35
Document TitleUser Manual pt 1
FCC ID Filing: SXXKTS-41

Navigation menu