KingBoard Technology KTS-86 Bluetooth Speaker User Manual Manual

Shenzhen KingBoard Technology Co., Ltd. Bluetooth Speaker Manual

Contents

Manual

User’s manualPackage Includes1 Bluetooth speaker2USB to Micro USB cable3 3.5mm Auxiliary CableFeaturesDurable, shock and weather-resistant silicone wrapOn-board playback and volume controlsAuxiliary input to connect speaker with non-Bluetooth devicesCharge itPlug the micro USB cable into the micro USB port under the silicone cover on the buttonright corner of the speaker, and connect the other end of cable to either a computer USB portor to a USB-compatible car or wall charger.A solid red LED light will appear through the grill on the back of the speaker to indicatewhen the KTS-86 is charging, even while speaker is turned off.When charging is complete ,the red LED light will turn off.Charging time is approximately 2 hoursPair & Connect with a New DevicePower on the kts-86 speaker(refer to the “Turn it on” section)The KTS-86 will emit a tone, and then LED light on the back of the speaker will begin toflash blue as it tries to reconnect with a previous device. If it cannot reconnect, the LED lightwill begin to quickly flash blue to indicate that the speaker is now ready to be paired with anew device.On your Bluetooth enabled smartphone, tablet or media player, navigate to the Bluetoothsetting menu, turn on the Bluetooth feature, and search for a new devices.After a few seconds you will see “KTS-86”listedTap this model to select it. The LED will turn a solid blue. You are now paired, connectedand ready to play.Alternatively you can connect any non-Bluetooth device using the included 3.5mm AUXcable together with the AUX input located under the silicone cover the bottom right corner ofthe speaker. While plugged in via the AUX input, the LED light will slowly flash blue andBluetooth on the speaker will automatically turn off.Power On/OffPress & hold the power button on the right side of the speaker for 2-3 seconds to turn on thespeaker and automatically reconnect with the last Bluetooth device.The KTS-86 will emit a tone, and the LED light on the back of the speaker will glow blue toindicate that the speaker is now powering on.To turn the KTS-86 speaker off, press &hold the power button again for 2-3seconds.The
speaker will emit a tone to indicate that the KTS-86 is now powering off.Reconnect to BluetoothYou only need to pair your Bluetooth device with the KTS-86 once.With your previously paired device’s Bluetooth turned on and in range, power on theKTS-86.The speaker will automatically reconnect to the last Bluetooth device it was connected to.If you have a previously paired device that does not auto-reconnect, navigate to the Bluetoothsettings menu on your device, turn on the Bluetooth feature, and select “KTS-86” from yourlist of paired Bluetooth devices.PlayConnect your device to the KTS-86 over Bluetooth or through the AUX input..(refer to the“Pair & Connect” section)Open your favorite music app and press play.You can control the music ,volume ,and tracks from your device, as well as control theplayback and volume from the speaker: Volume on your device and on the speaker arecontrolled separately.Press the play button to play/pause music, or to answer/end phone calls. Press the “+”or“-“buttons to adjust volume.Speaker will emit a tone when the maximum or minimum volume on the speaker has beenreached. If volume is still too low, you can also adjust the volume on your device.All audio, including music, games, videos, and notifications will be routed through theKTS-86.Product DiagramPLEASE NOTE:Speaker is not water resistant when the silicone cover is closed and secure before using in a wetenvironment.
Important Waterproof /Safety InformationIMPORTANT:DO NOT submerge the KTS-86 in water. This device is not intended to functionproperly after being under water.Before using the KTS-86 in a wet environment, make sure the silicone cover over the AUXand micro USB input ports on the back of the speaker is fully closed and secured. If watergets into either port, the speaker may not function properlyThe speaker is rated IPX4.which means the speaker can be splashed with water or left in therain (but not submerged in water) for approximately 5 minutes.If the KTS-86 gets wet, it is recommended that you dry the speaker completely before usingit again.All actions done with the KTS-86 are done at your own risk. While the speaker isweather-proof and has a protective silicone case, it is not a guarantee for complete damageprotection.SpecificationOutput Power:3WSpeaker Driver Size:45mmImpedence:4 ΩFrequency Response: 15Hz to 18 KHzWaterproof Level: IPX4Battery Information:Built-in Battery: Lithium –ionInput: DC 5V/1ABattery Capacity: 400mAHMusic playing time: Up to 6 hoursStandby time: Up to 24 hoursCharging time：2hoursApproximate playback time. Battery life depends on individual use and may be slightly more orless than the time specified.Bluetooth InformationBluetooth Specification: V2.1+EDROperating Distance:10 MetersSystem Requirements: Bluetooth –capable deviceAdditional Connection Sources:Audio: 3.5mm AUX cablePower Souce:Bulit-in rechargeable battery or via USB cable.

Navigation menu