Kingsun DC-0555 Bluetooth Speaker User Manual

Shenzhen Kingsun Enterprises Co., Ltd. Bluetooth Speaker Users Manual

Users Manual

1. Technical Parameters: Spécifications
Bluetooth version3.0
Wireless transmission distance/ distance de transmission10M
Battery capacity/ capacité de la pile400mAh 3.7V
Working time(under normal volume)/ Durée de marche2 hours
Speaker spec/ transducteur:¢40mm plus
Charging voltage/ Voltage de charge5/500mA
Power / Puissance 4Ω/3W
Frequency range/gamme de fréquence 120HZ-18KHZ
2. Function instruction/ Instructions de marche
Power on/off./ Marche/arrêt
Charging port (Micro USB) /entrée de charge
LINE IN/AUX Entrée auxiliaire de 3.5 MM
Mode Button (FM radio or Bluetooth or Aux), press to change
the play mode.
Bouton de fonction (FM radio ou Bluetooth ou Aux), appuyiez pour
changer le mode de marche.
When playing music (Line In or Bluetooth), tap to go to
previous song, press and hold to adjust volume down.
Appuyez et garder enfoncé pour régler le volume plus
bas/cliquez pour entendre la piste prédente.
When playing music (Line In or Bluetooth), tap to go to next
song or press and hold to adjust volume up.
Appuyez et garder enfoncé pour régler le volume plus
haut/cliquez pour entendre la piste prochaine .
When playing music (Line In or Bluetooth), tap to Play or Pause
music. Under Bluetooth mode, tap to answer calls when calls
come in, and then press again to hang up calls. Press for a long
time to disconnect the connected Bluetooth.
Cliquez pour écouter ou pauser votre musique. En Bluetooth, cliquez pour
pondre aux appels et cliquez de nouveau pour décrocher. Gardez
enfoncé pour détacher le Bluetooth appairage.
Connect Bluetooth:
Appairage
1. First make sure Bluetooth is turned on in the settings of
your device.
Activez le mode Bluetooth sur votre appareil source Audio
2. Switch the power button on the speaker to ‘On’.
Mettre le bouton marche/arrêt en position de marche
3. From the Bluetooth screen on your device look for
‘Sound Blox’ and select it.
Recherchez « Sound Blox « dans la liste des appareils du menu de
configuration Bluetooth de votre sources Audio. Faites votre
lection pour compléter lappairage.
www.xtremecables.com | 877-536-8766
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.

Navigation menu