Kingsun DC-816 Bluetooth Wrap Around Sports Headphones User Manual Manual

Shenzhen Kingsun Enterprises Co., Ltd. Bluetooth Wrap Around Sports Headphones Manual

Manual

PACKAGE CONTENTS Bluetooth Stereo Headphones USB Charging Cable Operation Manual KEY FEATURES Compatible with Bluetooth enable devices Built-in rechargeable battery Volume control & media shortcuts keys SAFETY INSTRUCTIONS Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids. Do not operate the unit of it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit. Do not use the unit if it has been dropped or damaged in anyway. Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk. Do not puncture or harm the exterior surface of the product in anyway. Keep the unit free from dust, lint, etc.
Do not use this unit for anything other than its intended use or purpose. Doing so may damage the device. This product is not a toy. Keep out of reach of children. Do not use the headset at excessive levels as this may damage hearing. Do not expose batteries, battery pack, or batteries to installed to excessive heat, such as direct sunlight, or open flame. FEATURES/PARTS A. Multifunction Button & Power Button B. Volume Down/Rewind C. Volume Up/Fast Forward D. LED Indicator Light E. Charge Port CHARGING THE EARPHONES
The headphones come with a built-in rechargeable battery. Before using it for the first time, we recommend you charge the battery fully. Only use the supplied USB cable to charge the headphones. Connect the USB cable to a computer USB port and the USB plug to the charging jack of the headset. The red LED light will illuminate while the earphones are charging. A full charge of the battery takes around 3 hours. When the battery is fully charged, the LED light will turn off. Disconnect the headset at this point. The headset will then be ready for use. When the battery is low, the LED will flash red three times and emit a beeping sound. When this occurs, please recharge the headset. TURING HEADSET ON /OFF Power On: Press the MFB button 4s to turn on the unit, you can see the red and blue LED flash alternative. Power Off: Press and hold the Power on/off button for 5-6 seconds until the red LED flashes once and the “off” tone sounds. In order to save power, the headset will automatically turn off if not paired with a device after 5 minutes. PAIRING THE EARPHONES 1. Ensure the headphones are turned off. If they are not, please turn off the earphones first before pairing. 2. Press and hold the Power on/off button for 5-7 seconds until the
red and blue LED flash alternatively. This will indicate your earphones are now in pairing mode. 3. Place the headphones and the Bluetooth device to which you would like to pair it within the operating distance. We recommend keeping the two devices no further than 3 feet apart. 4. Ensure Bluetooth is enable on your phone or music device. Refer to the manufacturer`s instructions for how to enable Bluetooth on your device. 5. Once you have activated Bluetooth on your device, select the headphones “BT-HDSET” from the list of available Bluetooth devices. If prompted, enter the pin of “0000” followed by “ connect” 6. Please note, pairing mode on the headphones will last for two minutes. If no devices are paired after two minutes. If no devices are paired after two minutes, the headphones will automatically return to standby mode. 7. if pairing is unsuccessful, turn off the headphones first and repair following the aforementioned steps. Once you have paired the headphones with a device , the headphones will remember this device and will pair automatically when the device`s Bluetooth is activated and in range, you do not need to re-pair any previously connected devices.
8. When paired successfully, the blue LED of the headphones will flash twice quickly and then the blue LED will blink steadily to indicated paired mode. ANSWERING A CALL Once the headphones are paired to your device, you can answer calls directly from your headset. Please see below for a table of how to control calls from your headset. Function Status of headset Operation Answer calling Ringing Short press MFB Volume up Conversation mode Short press or long press “’key, when the volume is Adjusted to maximum, the headset will beep to notify you. Volume down Conversation mode Short press or long press “”key,when the volume is adjusted to
minimum, the headset will beep to notify you. REJECT a CALLING Ringing Press and hold the MFB 3 seconds. The call will be sent to voice mail LISTENING TO MUSIC Once the headphones are paired to your device, you can steam music wirelessly to the headset. Select the track you wish to listen to on your device to listen via headphones. Should you encounter any problems while steaming, please refer to your device`s user manual. MANUAL KEY FUNCTIONS Your headphones are equipped with a few shortcut keys. Please note the following functions. 1. Increase Volume: Long press Vol+ Button 2. Decrease Volume: Long press Vol- Button 3. Play/Pause: Press the multifunction button 4. Previous Track: Press once the Vol- button 5. Next Track: Press once the Vol+ button WEARING THE HEADSET
The headphones should be positioned behind your head with the earbuds hooking over your ears and into your ears. Please see below. SPECFICATIONS Bluetooth: V3.0+EDR Frequency: 2.4-2.48GHz Transmission Power: Class 2 Bluetooth Profiles: HSP, HFP, A2DP and AVRCP Operating Distance: Up to 33ft (10m) Play Time: Up to 4 hours Talk Time: Up to 3.5 hours Standby Time: Up to 96 hours Battery: Li Polymer Battery Battery capacity: 120mah Charging input: DC5V 140mah Charging Time: 3hours
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. RF warning for Mobile device:

Navigation menu