Kingsun MA-2870-A Bluetooth Speaker User Manual

Shenzhen Kingsun Enterprises Co., Ltd. Bluetooth Speaker

User Manual

Download: Kingsun MA-2870-A Bluetooth Speaker User Manual
Mirror Download [FCC.gov]Kingsun MA-2870-A Bluetooth Speaker User Manual
Document ID3447922
Application IDA2Mq7EHLM+rVt5bXPy4pKw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize20.65kB (258105 bits)
Date Submitted2017-07-03 00:00:00
Date Available2017-07-03 00:00:00
Creation Date2017-06-28 15:58:19
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2017-06-28 15:58:19
Document TitleUser Manual
Document CreatorMicrosoft® Word 2010
Document Author: siemicSF-sales

Midel WA-zemA/veooseBT-ASST
BLUETOOTH
SPEAKER
Introduction
Thank you for purchasing your Vivitar Eluetuoth Speaker. item vaoozsei’. Vou can use your
speaker With iPads. iPhones, iPods and many other types of smartphones and Bluetcloth devices
to stream music and enjoy hands-free calling. In order to get the best results when using this
device, please read this manual first before using.
Package Contents
>Vivitar VGOOSGBT Bluetooth Speaker
>USB Charging Cable
-AUX Cable
-U5M‘S Manual wlth Warranty Information
Specifications
mah Specific-flan: V3.0
Namath Range: Up to 33 Feet (10 Meters)
Power Supply: DC 5v
Battery rm: 3.7V. izOOmAh Lithium-Ion Battery
Play ‘I’iml' Approximately 4-5 HDurs'
charge Ti Approximately 5-6 Hours
Dimensions: 132x84x64mm
'Applicabla at aoai of maximum volume. Results wui be lower when volume is higher.
Pairing Your Speaker with a Bluetooth Device
View speaker can be paired with most Bluetuoth devices including iPads iPhunes, iPod Touches,
and most smartnhonas. laptops and tablets In order to pair your speaer with a phone, follow the
steps below:
1. Press and hold the Power/Mode button to power on your speaker. Wait for several seconds
until an LED indicator light will start alternately flashan red and then blue repeatedly This
indicates that your speaker is In pairinp mode.
2. Go to the Bluatooth Manager of your Eluatooth device.
3. Search Bluetooth devices and select 'vivitar Speaker to start connecting.
4. Enter "coca" if your device asks for the PIN code.
5. Once paired. the LED indicator light will slowly oiink blue every few seconds.
Switching Modes (Using the TF card Reader slot I Auxiliary input)
If a memory card is inserted in the TF Card Reader slot your speaker will automatically go
into Music Mode in which music is played from the memory card. Similarly. if an audio source is
connected through your speaker's Auxiliary Port your speaker will automatically go
into Auxiliary input Mode. Repeatedly press the Power/Mode button to switch between
Bluetooth Mode. Music Mode or Auxiliary input Mode
Note: For a private listening experience. you can plug a pair of headphones into the Headphone
Jack on the rear of your speaker.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment
This device complies with Part15 of the FCC Rules. Operation is subject to the following two
conditions (i) this device may not cause harmful interference, and (2) this device must accept
any interference received. including interference that may cause undesired operation.
This equipment has been tested and found to comply With the limits for a Class B digital deVlce,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates. uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However. there is no guarantee that
interference will not occur in a particular installation
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies will: FCC radiation unpasure limits set {on}: for an
uncontrolled environment his equipment diould be installed and opened with
minimum distance 20cm Mwomthendiawr ilz your body.»‘

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Warning                         : Invalid secondary xref table
Page Count                      : 2
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : siemicSF-sales
Creator                         : Microsoft® Word 2010
Create Date                     : 2017:06:28 15:58:19+08:00
Modify Date                     : 2017:06:28 15:58:19+08:00
Producer                        : Microsoft® Word 2010
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AAPKMA-2870-A

Navigation menu