Kingwave Technology K71216 2.4GHz GFSK Transceiver module User Manual K71216 manual

Download:
Mirror Download [FCC.gov]
Document ID	2011122
Application ID	tGCuIoKJRC5codaMWG75Ig==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	70.51kB (881426 bits)
Date Submitted	2013-07-09 00:00:00
Date Available	2013-07-09 00:00:00
Creation Date	2013-05-21 17:48:54
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2013-07-09 18:16:17
Document Title	K71216 manual
Document Creator	Microsoft® Office Word 2007
Document Author:	Jinder

K71216 2.4GHz GFSK Transceiver module Manual
1. Introduction
K71216 is a 2.4GHz ISM band transceiver.
It provides one type of digital modulation GFSK, and on-air data rate support 3Mbps. The proprietary
low MAC feature coupled with high-speed multimedia processor enables a very high quality wireless
multimedia application and a great interference immunity capability.
2. Pin Assignment
10
14
ANT PORT
- 1-
3. Installation
Putting the module on the carrier board with socket.
4. SPI Digital Interface
All configurations of K71216 are defined by the values of register map.
The register map can be accessed via SPI digital interface coupled with external MCU.
All configuration values need to be properly set into four types of register maps.
5. SPI format
- 2-
6. Dimension
NOTICE : The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, No
change to the antenna or the device is permitted. Any change to the
antenna or the device could result in the device exceeding the RF
exposure requirements and void user’s authority to operate the device.
FCC ID Label Graph:
FCC ID : TJI-K71216
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE: If the product is too small to make so many text labels, only need to indicate the
FCC ID number on the label, but the above text will be printed in the manual or
packaging box.
- 3-
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Federal Communications Commission Requirements
The equipment has been tested and found to comply with the limits for Class B Digital Device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
●Reorient of relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
●Consult the dealer or an experienced radio/TV technician for help.
THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE
FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and receiver.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to
OET65. The equipment has very low levels of RF energy that it is deemed to comply without
testing of specific absorption ratio (SAR)
Modular approval RF Exposure：
This equipment must be installed and operated in accordance with provided instructions and
the antenna(s) used for this transmitter must be installed to provide a separation distance of
at least 20 cm from all persons and must not be co‐located or operating in conjunction with
any other antenna or transmitter. End‐users and installers must be provide with antenna
installation instructions and consider removing the no‐collocation statement.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20 cm may be maintained between the antenna and users. The final end
product must be labeled in a visible area with the following: “Contains FCC ID:TJI‐K71216”.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module in the user’s manual of the end product which
integrates this module. The end user manual shall include all required regulatory
information/warming as shown in this manual.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : Jinder
Create Date                     : 2013:05:21 17:48:54+08:00
Modify Date                     : 2013:07:09 18:16:17+08:00
Has XFA                         : No
Language                        : zh-TW
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : Microsoft® Office Word 2007
Metadata Date                   : 2013:07:09 18:16:17+08:00
Format                          : application/pdf
Creator                         : Jinder
Title                           : K71216 manual
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:08cf0968-8658-4bc0-a5d7-f0185424e093
Instance ID                     : uuid:acf6031c-a161-4a3a-9603-89ad3b73f8fb
Page Count                      : 5

EXIF Metadata provided by EXIF.tools