Kinpo Electronics BT002D Bluetooth Audio Dongle User Manual BT002 UM GB 051124

Download:
Mirror Download [FCC.gov]
Document ID	612450
Application ID	gLkQZHXMmt04BJneLjVH2g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.65kB (258158 bits)
Date Submitted	2005-12-16 00:00:00
Date Available	2005-12-16 00:00:00
Creation Date	2005-11-28 06:13:42
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2005-11-28 14:14:42
Document Title	Microsoft Word - BT002 UM GB 051124 .doc
Document Creator	PScript5.dll Version 5.2
Document Author:	HAYDN

BT002
Bluetooth Audio Dongle & Headset
(English)
E1
Contents
I. Safety Instructions
II. Specifications
III. Name of Parts and Keys
IV. LED Displays
1. Package Contents
2. Loading the battery
3. Pairing
Pairing the Audio Dongle to the Headset
Pairing the Mobile Phone to the Headset
4. Using the BT Set to Audio Device
5. Using the BT Set in PC
6. Using the Headset to Mobile Phone
I. Safety Instructions
Do not attempt to disassemble, repair or alter the equipment
yourself. The high-voltage circuitry in the equipment poses
significant electrical hazard.
Do not attempt to disassemble, alter or directly solder the battery.
Do not use batteries that are significantly damaged or deformed.
Do not put it into water or allow it to get wet.
Do not use this product in the bathroom.
E2
II. Specifications
General
Power
Source
Headset: AAA Battery X 1
Audio Dongle: AAA Battery X1
AC Adapter:
Dimensions Headset: Left 76.8 X 58.7 X 31.9 (in mm)
Right 68.8 X 58.7 X 31.9 (in mm)
(LXWXD)
Audio Dongle: 64.5 X 39.1 X 21.2 (in mm)
Weight
Headset: Approx. 65.6g (without battery)
Audio Dongle: Approx. 25.4g (without battery)
Operating
Temperature: 0°C to 40°C (32°F to 104°F)
Conditions Humidity: 5% ~ 90%
Storage
-20°C ~ 60°C (-4°F to 140°F)
Temperature
Bluetooth
Standard
Bluetooth
Profile
Audio Dongle
Headset
Bluetooth SIG 1.2
A2DP (Advanced Audio Distribution Profile)
HSP (Headset Profile)
HFP (Hands-Free Profile)
RF Specifications
Spectrum
Modulation
Method
Range
Power Class
Frequency
Band
Antenna
Sensitivity
Output Power
Audio Dongle
Headset
FHSS (Frequency Hopping Spread Spectrum)
GFSK (Gaussian Frequency Shift Keying)
10M (without obstacles / tested by laboratory)
Bluetooth Class 2
2402 ~ 2480GHz
2402 ~ 2480GHz
Internal embedded Antenna
<0.1% BERAT –80dbm –80dbm
-6dbm ~ 4dbm
E3
III. Name of Parts and Keys
Audio Dongle
Audio Plug
(see 1)
DC IN
(see 2)
 key
LED
 key
Battery Door
----------------------------------------------------------------------------------------------
1 Power key (
To power the BT Dongle on and off
1. Press once Æ keep pressing 2 seconds to power on the BT Dongle
2. Press once Æ keep pressing 2 seconds to power off the BT Dongle
2 Pairing key (
When off, press and hold  key, and then press  key,
to enable Pairing functions.
----------------------------------------------------------------------------------------------
E4
Bluetooth Headset
Left
Ear hook
 key(-)
 key(+)
 key
LED
Location of Battery /
Battery cover
Microphone
1 Power key (
To power the BT Headset on and off
1. Press once Æ keep pressing 2 seconds to power on the BT Headset
2. Press once Æ keep pressing 2 seconds to power off the BT Headset
2 Volume keys (+ / -)
th
There are 15 levels in volume control and the default value is 6 level.
1. Volume UP: press once to up one level.
2. Volume DN: press once to down one level.
3. Volume DN: when battery low, there will be a warning sound to
remind you, if press Volume DN key, the warning sound will be turned
off.
3 Compound Functions
Use to pair, answer the phone, and cancel the phone call, see details as
below:
Status
Keys
Pairing
Press and hold , then press

Answer incoming call  (press once: 1 second)
Hang up the phone
 (press once: 1 second)
Cancel
See  key
Last number redial
Press  +  at the same
time
E5
---------------------------------------------------------------------------------------------Right
Ear hook
 key (X)
Status
Key
Play
 (press once: 1 second)
Stop
 (press once: 1 second)
Cancel (do not answer  (press once: 1 second)
the incoming call)
IV. LED Displays
Modes
Pairing
Searching
Linked
Dis-link
Telephone call
Talking
Play music (Stop headset
only)
LED Status
Blinking
Blinking
Blinking (in breathing style)
Blinking
Blinking
Blinking (in breathing style)
Blinking
E6
1. Package Contents
Audio Dongle
Headset
AAA Battery X2
Warranty Card
User Manual
AC Adapter (Optional)
2. Loading the Battery
E7
3. Pairing
Pairing the Audio Dongle to the Headset
The Audio Dongle and Headset have been paired before leaving the
factory.
1. Press and hold the  key, and then press the  key
of the Audio Dongle
2. Press and hold the  key, and then press the 
key of the Headset.
During searching, both LED of the Audio Dongle and Headset will
blink.
When they are linked, both LED will blink in a breathing style.
LED
LED
IMPORTANT
The Headset will be turned off automatically when out of the signal
receiving range (10M without obstacles) over 60 seconds. There will be
a power off sound to remind you and then turn off the headset.
NOTE
This Headset beeps to alert you the battery life is low and it will keep
on until you press the  key to turn the beep off.
Each time you turn on the Headset, the beep will alert you if the
battery life is low.
E8
Pairing the Mobile Phone to the Headset
1. Enable the pairing function of the Headset.
See STEP 2 in “Pairing the Audio Dongle to the Headset”.
2. Power on your mobile phone and check the pairing function provided
by the phone.
STEP 1
ª
Pairing the mobile
phone and headset
first, then turn off the
headset.
STEP 2
Pairing the audio
dongle and headset,
then turn them off.
STEP 3
ª
Pairing the mobile
phone and headset
again to confirm the
pairing of the STEP 1.
NOTE
If you want to pair a second mobile phone to the headset, please
repeat the STEPS 1, 2, and 3.
E9
4. Using the BT Set to Audio Device
The Audio Dongle is only used to transfer the signal from the audio
device to Headset. The control side is in audio device.
1. Turn on the Audio Dongle and Headset
2. Turn on the audio device such as CD Player, Radio, etc. and play.
3. Plug the Audio Dongle to the earphone jack of the audio device.
4. Wear the Headset.
Press  key on the headset to play.
During playing, press  key again to stop. The stop function
only work for the headset, you need to stop the audio device for
stopping the playing.
Audio Dongle connect
to audio device
5. Using the BT Set in PC
The Audio Dongle is only used to transfer the signal from the PC to
Headset. The control side is in PC.
1. Turn on the Audio Dongle and Headset
2. Turn on the PC.
3. Plug the Audio Dongle to the earphone jack of the PC.
4. Wear the Headset.
Audio Dongle connect
to PC
E10
6. Using the Headset to Mobile Phone
1. Pair your Mobile Phone to Headset first.
2. Wear the Headset.
Status
Answer
Hang up
Cancel
Last
number
redial
Key

(press once: 1 second)
Remarks
When listen music, if there is
a phone call coming in, the
music in the headset side will
be stopped, and there is a
ring tone.

Press the key and the music
(press once: 1 second)
will play again.

If do not want to answer the
phone call.
 +  Redial the last call you have
made.
E11
CE Statement
For the following equipment: Bluetooth Audio Dongle & Headset
Is herewith confirmed to comply with the requirements set out in the
Council Directive on the Approximation of the Laws of the Member
States relating to Electromagnetic Compatibility (89/336/EEC),
Low-voltage Directive (73/23/EEC) and the Amendment Directive
(93/68/EEC), the procedures given in European Council Directive
99/5/EC and 89/3360EEC.
----------------------------------------------------------------------------------------------
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions:
1. The device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This Transmitter must not be co-located or operating in conjunction with
E12
any other antenna or transmitter.
Any changes or modifications (including the antennas) made to this
device that are not expressly approved by the manufacturer may void
the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
E13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2005:11:28 06:13:42Z
Modify Date                     : 2005:11:28 14:14:42+08:00
Page Count                      : 13
Creation Date                   : 2005:11:28 06:13:42Z
Mod Date                        : 2005:11:28 14:14:42+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : HAYDN
Metadata Date                   : 2005:11:28 14:14:42+08:00
Creator                         : HAYDN
Title                           : Microsoft Word - BT002 UM GB 051124 .doc

EXIF Metadata provided by EXIF.tools