Kintech PC7088 tablet pc User Manual

Kintech Co. Ltd tablet pc

User Manual

Download: Kintech PC7088 tablet pc User Manual
Mirror Download [FCC.gov]Kintech PC7088 tablet pc User Manual
Document ID2547867
Application IDapx+pOdIyhZRzMK2PRLzdg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize361.41kB (4517638 bits)
Date Submitted2015-03-04 00:00:00
Date Available2015-03-04 00:00:00
Creation Date2014-12-30 14:41:36
Producing SoftwareMicrosoft Office Word 2007
Document Lastmod2015-01-22 17:51:26
Document Title目 录
Document CreatorMicrosoft Office Word 2007
Document Author: 微软中国

USER MANUAL
FCC ID: BRCPC7088
Content
1 Preface............................................................................................................................................ 3
1.1 Acknowledgements ............................................................................................................. 3
1.2 Notes ................................................................................................................................... 3
1.3 Safety Notices ..................................................................................................................... 4
2 MID Introduction ........................................................................................................................... 5
2.1 Ready to use ........................................................................................................................ 5
3 Quick Guides ................................................................................................................................. 6
Note: 1. Device without RESET key. Please press “Power” key and hold for 10 seconds to
restart the device if it crashed.................................................................................................... 7
2. Press “POWER”+“V—” at the same time for screen cut ..................................................... 7
3.4 Switch on/off ..................................................................................................................... 10
3.5 Power Saving Mode and Locked Mode: ........................................................................... 10
3.6 Operation of touch panel ................................................................................................... 11
3.7 Main Interface ................................................................................................................... 11
3.8 Apps .................................................................................................................................. 13
3.9 USB Connect..................................................................................................................... 13
3.10 Input Text ........................................................................................................................ 14
3.11 Use Skills ........................................................................................................................ 15
Widget interface ...................................................................................................................... 15
4 General Setup ............................................................................................................................... 15
4.1 SIM Card management, WIFI & Network ........................................................................ 15
4.2 Bluetooth ........................................................................................................................... 18
4.3 Data Usage ........................................................................................................................ 21
4.4 More... ............................................................................................................................... 21
4.5 Audio Profiles ................................................................................................................... 26
4.6 Display .............................................................................................................................. 28
4.7 Storage .............................................................................................................................. 31
4.8 Battery ............................................................................................................................... 33
4.9 Apps .................................................................................................................................. 33
4.10 Account ........................................................................................................................... 35
4.11 Location access ............................................................................................................... 36
4.12 Security ........................................................................................................................... 39
4.13 Language & input............................................................................................................ 41
4.14 Backup and reset ............................................................................................................. 42
4.15 Date and Time ................................................................................................................. 43
4.16 Scheduled power on off .................................................................................................. 44
4.17 Accessibility .................................................................................................................... 44
4.18 Developer options ........................................................................................................... 45
4.19 About MID ...................................................................................................................... 46
5. Multimedia .................................................................................................................................. 46
5.1 Music Player ..................................................................................................................... 46
5.2 Video ................................................................................................................................. 47
5.4 Camera .............................................................................................................................. 49
5.5 FM Radio .......................................................................................................................... 50
6 Communication function .............................................................................................................. 51
6.1 Phone......................................................................................................................................... 51
6.2 SMS................................................................................................................................... 52
6.3 Contacts............................................................................................................................. 52
7. Movil Teacher ............................................................................................................................. 53
7.1 Device setting.................................................................................................................... 53
7.2 USER’S INTERFACE ...................................................................................................... 56
7.3NAVEGACION ................................................................................................................. 56
8 Internet ......................................................................................................................................... 61
8.1 Browser ............................................................................................................................. 61
8.2 E-mail ................................................................................................................................ 62
9 GPS function ................................................................................................................................ 64
10 Other Applications ..................................................................................................................... 65
10.1 Clock ............................................................................................................................... 65
10.2 Calculator ........................................................................................................................ 66
10.3 Explorer........................................................................................................................... 66
10.4 Recorder .......................................................................................................................... 69
11 Application Installation .............................................................................................................. 70
11.1 Installation ............................................................................................................................... 70
11.2 Uninstall .......................................................................................................................... 70
12 Troubleshooting ......................................................................................................................... 71
1 Preface
1.1 Acknowledgements
Dear Customer,
Thank you for purchasing our products, the HD tablet pc in 7 inch.
With functions like build-in 2G, 3G, WIFI, BT, GPS, FM, Voice call etc, you
can achieve wireless communication or use wireless network easily, surfing
the internet whenever and wherever possible. And with high-accuracy build-in
GPS module, you can achieve navigation function just by installing the
mapping software. You can also go through the brand-new entertainment
through the functions of build-in multiple sensors, build-in mobile analog
television, image pickup etc. So are you ready to embrace the new era of
mobile internet entertainment in palm?
This manual will give you a general introduction about all kinds of
functions, use skills and notes, please read it before using the device. Thanks.
1.2 Notes
Maintenance
 The device is not waterproof, please keep it dry. In order to avoid the
risk of electric shock, do not touch the cable power plug with wet
hands.
 Please do not let the device fall onto, rub against or knock against
hard objects during use, because this may cause surface scratches
on the device, battery damage, data loss or other damage to the
hardware.
 Over-voltage, power cable strain and bending or squeezing of the
power cable by heavy objects must be avoided to prevent the
possibility of overheating or fire.
 Please do not knock, throw or prod on MID. Please avoid dropping,
knobbing or curving the device.
 Only qualified maintenance personnel can install or repair the device.
Opening the device in any way will invalidate the warranty.
1.3 Safety Notices
Please read present section before using the device.
 Please comply with any related restrictions and rules; do not use
the device during driving or where blasting operations are in
progress.
 Please don’t turn on the device on in locations where wireless
equipment is forbidden or when the usage of the device will cause
interference and possible danger.
 Please comply with any related restrictions and rules, wireless
equipment can influence the flight of the plane; please consult the
relevant airline company if you intend to use the device on a
plane.
 All the wireless equipment is subject to external interference and
this can affect its performance.
 Only qualified maintenance personnel can install or repair the
device. Opening the device in any way will invalidate the warranty.
 Please keep the device away from strong magnetic fields in order
to avoid damage to the product.
 Please don’t use the device in a petrol station, or near to fuel or
chemicals.
 Please put the device out of reach of children, and please make
sure the device used by child only under supervise.
 Some movies, music and pictures are under the protection of
copyright, unauthorized usage is deemed as an infringement to
the laws of copyright.
 When connecting with other devices, please read the user manual
for detailed safety instructions. Don’t connect the device to
incompatible products.
 Never clean the device with any chemicals or detergent, these will
damage the product surface and corrode the finish. Never let this
product be exposed to a humid environment or rain as the water
leaking into the device could disable it to the extent of being
beyond repair.
2 MID Introduction
2.1 Ready to use
Battery Charging
Charge the battery firstly before initial use.
2.1.1 Please charge the MID with our original power adapter.
Note: Please use the original accessories and battery provided with the
device, do not use the incompatible products in case of damage unexpected,
any damage of problem result from this could be beyond of our range of
maintanence.
3 Quick Guides
3.1 Packing List
Components
MID Device
Power Adaptor
CD-ROM
USB Cable
HOST cable(optional )
Earphone(Optional)
User Manual
Warranty Card
HD Cable
3G USB Dongle(Optional)
RJ45 USB Dongle
Leather Case
Keyboard/Mouse
TF (Micro SD) Card
Quantity
3.2 Product appearance
3.3 Instructions on Keys
Symbol
Name
Description
Rear Camera
Static and dynamic camera
For music or movie
Speaker
Microphones
hole
Front Camera
receiver
POWER
Recording microphone
Static and dynamic camera
Telephone receiver
Short press this button to enter sleeping/wake up
mode, press long to switch ON/OFF
G
Volume Volume+
Stereo
Earphone Jack
MIC USB port
TF card Slot
SIM Card slot
Decrease volume
Increase volume
Stereo Earphone Jack
MIC_5PIN USB Port
TF (Micro SD) Card Slot
SIM Card slot
Note: 1. Device without RESET key. Please press “Power” key and hold for 10
seconds to restart the device if it crashed.
2. Press “POWER”+“V—” at the same time for screen cut
Function instruction:
 Adopt MTK8312 processor,Dual-core ARM® Cortex-A7 MPCore™up to 1.3G
GPU:
Mali400-MP2 44.3M tri/sec and 832M pixel/sec @ 416MHz;support ANDROIED4.4
intelligent operation system
 Support DDR3 512M/1GB(optional)
 Support 4GB/8GB/16G(optional)built-in ROM Flash memort , External T-flash card
1G~32GB Memory
 Support 7’ HD LCD screen 1024*600,multipoint capactive touch
 Support video: mp4,3gp,AVI,MOV etc formats
 Support JPG, PNG, BMP, GIF,etc picture formats,Support picture with 8000*8000
resolution
 Support MP3, WAV etc video formats
 Support E-book format TXT 、 LRC 、 PDF 、 EPUB etc , automatic
browsing,zoom,bookmarks,text,etc function.
 Support built-In WIFI access to broadband wireless Internet access,colorful software
can operational in the ANDROIED 4.4 system, Some of the commonly used software
system preset: Internet Google browser (IE), video, books, etc
 Support Microphone and speaker function ,support record and video function
 Support built-in 3G(WCDMA 3G ),Wireless communication by USIM card,phone
receive/calling, message receive/Sending,email and contacts same as movile phone
 Support USB HOST(Through Mini USB connection )
 Support 0.3M Front Camera and 2.0 Back Camera
 Support G-sensor and screen direction spinfunction
 Support built-in Bluetooth 4.0
 Support FM function
 Support GPS navigation
 Support stereo headphone and double trumpet output
 Support multiple languages
 USB mobile disk,WIN_2000 pack drive from the above systems
Specification:
Panel
port
Computer
size
Resolution
MINI USB
CPU
MTK8312,Dual-core ARM® Cortex-A7 MPCore™up to
1.3G
7 –inch LCD screen
1024*600
storage
supply
Storage
Ram
Extend
Power
Music
Video
Picture
E-book
GPS
WIFI
Built-in
3G/2G function
record
FM
Operating
Flash Memory :4GB/8GB/16G
ROM:DDRIII 1GB
Support TF card, 1GB -32GB external T-Flash card
Built-in rechargeable Lithium polymer battery
(3.7V,2500MAH),External power adaptor(output:DC5V@2A)
Format
MP3, WAV etc format
Earphone
(L)5mW+(R)5mW(32Ohm)
MP3
8Kbps ~ 392 Kbps
WMA 、
5Kbps ~ 192 Kbps
WMV
Frequency
20Hz 至 20KHz
SNR
90dB
Distortion
<0.05%
Format
mp4,3gp,AVI,MOV etc format
Maximum
1920*1088
resolution
Support JPG, PNG, BMP, GIF,
Format
TXT、LRC、PDF、EPUB etc format
Maximum
5M
capacity
Frequency
1.57542GHZ
Location
3m,2D cep
accuracy
Channels
16 channels
for receive satellite
Restarting
Cold boot:<35s(OPEN SKY)
time
Warm boot:32s
Warm start:<2s(OPEN SKY)
Rate
515m/s
Date
1HZ
update rate for
location
Maximum
18,000m
height
Antenna
Build in GPS antenna
Speed
Max54Mbps
Range
Max100m
Wifi
802.11 b/g/n
System
formats
WCDMA/GSM
WCDMA
850/900/1900/2100
Network
protocols
and (850or900choosable)
frequency
GSM 850/900/1800/1900
Transmissi
HSDPA 7.2Mbps/HSUPA 5.76Mb
on rate
ps
format
WAV
format
87.5MHZ-108MHZ
Win98/2000/2003/XP/Vista/Win7、Mac9.1 or above and
system
Linux2.4
Icons guidline
Icons Description:
Icon
Description
Icon
Description
Back to main menu
downloading
Power status
Web search
Return
Language
search
Recently viewed
Functions
menu
WIFI Status (blue
indicates Wi-Fi connected)
Network status
(blue indicates
2G/3G network
connected)
New e-mail
New message
Bluetooth signal
Flight mode
Under USB connection
Under USB
debugging
3.4 Switch on/off
Switch on and unlocked:
When the devices is in powered OFF mode, press and hold the Power key for 3
seconds to enter the Android startup process. The device will take about 100 seconds to
enter the system desktop, with the display in locked mode, please press and move the
icon by the white circle, the display will unlock automatically, see the image below:
Switch off:
1.When the device is in use, press and hold the POWER key for 3 seconds, the
screen will display the power off interface, choose the power off option to
confirm your selection and the system will shut down automatically.
2.Note: When the device is running low on battery power, it will sound an alarm
and then shut down automatically if it isn’t plugged into a power source to start
charging. If the device cannot start up please check if the battery power is too
low by charging the device
3.5 Power Saving Mode and Locked Mode:
Display turn off automatically when the device is under no usage status
(1)Starting power saving mode, display will turn off automatically when device
not in using.
(2)Short press the “POWER” key when the device is in use will make the system
enter SLEEP power save and locked mode.
Turn on the screen under inactive state
Under the power saving mode, the display is just turned off and showing a black
screen. This means that music play, movies play etc. will still continue to run.
Short press the power key, the system will return to locked mode, unlock by pressing
and moving the icon as pic show.
10
Pic. 3.1
3.6 Operation of touch panel
How to operate?
You can browse over the user interface, main menu or applications by kinds of
ways:
Click:
Just touch and click, when you’re going to input or choose applications on the main
interface.
Press on:
Press on the icons or shortcut icons to open program you’d like, like textbox &
linkage.
Slide
To move quickly on screen vertically or horizontally with your finger
Drug
Press on with certain pressure before drugging, and then keep pressing until the
icon be drugged to the target place.
Rotate
To most interfaces, for example, the input text and music interface, the direction
can be changed easily just by swaying the device
3.7 Main Interface
Main interface as pic.3.2, press blank place for seconds, you can use the
interface of applications, shortcut icons or user-defined page as wallpaper.
Messag
Notification
11
Battery
Voice search
Time
Screen cut
Pic. 3.2
Extend out of main interface
Main interface can extend beyond of interface to provide more space for
new-added shortcuts or gadgets. Pressing the blank place of interface, slide to left
or to right quickly to extend to left or right of outsider interface of screen and there
are two extensible interfacs available, see pic.3.3.
12
3.8 Apps
Click
on the top right corner of the screen, see pic 3.2,
app after entering into the main interface, see pic 3.6.
then choose your target
Pic 3.6
3.9 USB Connect
Storage setup
Set up the storage mode before transfer files. Connect MID and computer with USB
cable.
 Open the notice interface, (refer to chapter 2.3- Condition and Status of MID).
 Clicking USB Connected, open the icon of USB Storage, see pic.3.7.
 USB connected successfully
13
Pic 3.7
Copy files to memory card
 Connect MID and computer with USB cable.
 Set up storage mode.
 Opening the icon of my computer, check removable disk(x).
 Find out the target files and copy them to this removable disk(x).

Click “close USB Storage device” after copy finishes.
Note:You get no access to the memory card in MID when the MID is under USB
Connection, but it is workable once USB Connection be breaking.
3.10 Input Text
Screen Keyboard
When you need to input or edite , android keyboard will show up.
Choose input method

Open application setup。
 Click Language and input
 All input installed will list on text setup.

Choose your target input.
Input Method use and switch
14
⑤
①
④
Pic 3.8
②
Capital and small letter
③
Digtal input
Insert whitespace
Execute
Delect character on the left of cursor and long press to
delect all.
3.11 Use Skills
Widget interface
Click “widget” or slide on the screen to left to enter into widger interface. Long press
the widget to creat a shortcut, and you can enter related app quickly just through the
shortcut icon on desktop.
Creat a shortcut icon on desktop
After enter into program interface or widget interface, longpress any icons, a
shortcut icon will be created on the desktop, or press on and drug the icon to
desktop.
Note:widget shortcut will not be created if there is no enough space left for
main interface.
4 General Setup
4.1 SIM Card management, WIFI & Network
SIM Card management
15
Through SIM management, SIM setup can achieve, for example, turn on/off SIM or
turn on/ off data connection. As pic 4.0
Pic 4.0
Connect WIFI
 Choose setup application on main interface.
 Turn on WLAN, MID will scan automatically available wifi network. See pic
4.1.
 Choose target wifi network, inputting password if requested, click “connect”
Pic 4.1
Add Network

Click icon
top right at screen, see pic4.2.
16


Pic 4.2
Input network SSID,name of target network, and click “save”.
Click user name saved and click “connect”. As pic 4.3
Pic 4.3
WIFI Status.
Under WIFI Status turned on, user can see the notice at bottom right corner
when WLAM network available.
Connect WLAN during sleep mode.


Click icon
top right at screen, see pic4.3,and choose high class mode。
Click “keep Wi-Fi on during sleep” and choose accordingly the option
prefer to. See pic4.4.
17
Pic 4.4
4.2 Bluetooth



. Choose settings application on main interface.
Turn on Bluetooth as shown below.
The device will find the nearby device automatically when you click “search
for devices”. See pic. 4.5.
Pic 4.5
 Click the target device name, input the password and choose “pair” for sure after
“Bluetooth pairing request” window pop up.
 Click icon
,entering into the interface see pic4.6, and then you can operate
accordingly. Target device name can renamed if need.
18
Pic 4.6
4.2.1 Bluetooth setup
Rename
Click icon
, as pic. 4.7 shown,choose “rename tablet” and change to the
name as what you want.
Pic 4.7
Visibility Timeout
As pic. 4.7 shown , click “visibility timeout” and choose time options
accordingly. See pic4.8.(Note:visibility timeout refers to the time setup of
device be visible.
19
pic4.8
Show received files
As pic. 4.7 shown,choose “show received files” and you can see all the files
download or upload.
Advanced setting.
As pic. 4.7 shown,choose “Advanced setting” and set up accordingly, as
pic4.9.
Pic 4.9


FTP Server
Turn on FTP Server means access to server-side files and
operation by client-side is allowed.
Proximity reporter
Under proximity reporter turn on, the device will prompt by make a
noise when distance between the two devices is too far away or when
disconnect.
20
4.3 Data Usage
SIM Card data usage, see pic.4.10
pic4.10
WIFI data usage
Click icon
,Choose “Show Wi-Fi usage”, see pic. 4.11.
Pic 4.11
4.4 More...
4.4-1 Airplane Mode
Airplane mode is function for quick turn off of WIFI & SIM Card. WIFI & SIM card
is out of reach under airplane mode, but it recovers once airplane mode turn off
4.4-2 VPN
21
Open VPN and add VPN network, see pic. 4.12. Input network name and
related server address, and click “save” for sure.
Pic 4.12
Click VPN created ,as pic.4.13 shows. Input VPN Account & password
accordingly, and click “connect” to finish.
Pic 4.13
4.4-3 Tethering & portable hotspot
Tethering & portable hotspot
 Click the app “settings” on menu interface.

Make sure the device is under wifi connected. Choose More… and click “Tethering
&portable
hotspot”.
22
Pic. 4.14


Pic 4.15
Clicks “keep Wi-Fi hotspot on” and choose suitable period.
Click icon “return” , opening portable Wi-Fi hotspot and click “setup Wi-Fi
hotspot”.
23

Pic 4.16
Set up password for network encryption, and password should no less than 8
digits.
4.4-4 Mobile Networks



Data enabled
Under data enabled, you can use 2G/3G network through the SIM card.
Data roaming
Under data roaming, you can surf the internet by SIM card in the
situation of roaming.
This data roaming means roaming between operators, but not areas.
Network mode
Choose 2G/3Gfrequency channel. GSM means 2g network, this device
support GSM 850/900/1800/1900MHz and 3g WCDMA 2100MHz. 3g
frequency channel WCDMA 850MHz/900MHz/1900MHz is optional.
See pic 4.17.
Pic 4.17
24
(1)Access Point Name(APN)
Click Mobile network settings, see as below picture 4.18:
Pic 4.18
(2)Access point name (APN)
Choose the corresponding connection method see as below picture
4.19:
Pic 4.19
Notes : (CMWAP transfers the date via GPRS, it can only visit wap webpage, but
CMNET supports www browser on mobile internet, it can log in the similar web page the
same as we surfing on the computer. Meanwhile, the charges for them are different.)
(3)Network operator
Click operator, tablet system will automatically search available networks GSM and
WCDMA, see as below picture 4.20;
25
Pic 4.20
4.4-5 GPRS data priority mode
When open the GPRS date priority mode, it will give preference to your use of
the telephone network.
4.5 Audio Profiles
Open setting and choose Audio profiles and you can choose different mode for
setting see as below picture 4.21;
Pic 4.21
Click General and access to setting see as below picture 4.22;
26
Pic 4.22
Vibrate
Click Vibrate which can realize the vibration effect on MID when you dial phone call, see
as above picture:
Volumes
Click Volumes which can control the volumes of Ringtone & notifications、alarms, see
as below picture 4.23;
Pic 4.23
Voice call ringtone
Click voice call ringtone and you can choose the different ringtone as you like, see as
below picture 4.24;
27
Pic 4.24
Video call ringtone
Click video call ringtone and you can choose different mode of ringtones, see as below
picture 4.25;
Pic 4.25
System
It can be checked by ON/OFF, “Dial pad touch tones”, “Touch sound”, “Screen lock
sound”, “Vibrate on touch”.
(Notes: except standard, silent, meeting, outdoor mode can only be chosen but not be
set.)
4.6 Display
4.6-1 Brightness
 Click setting Apps
 Click Display Brightness.
 When pop-up brightness Settings panel, you can drag the brightness slider to
28
adjust degree between dark and bright. See as shown picture 4.26;




Pic 4.26
Once you set up the brightness, click ok.
4.6-2 Wallpaper
Click Setting Apps
Click Displaywallpaper
You can choose the wallpaper as you like, such as live wallpaper - gallery (custom)
- wallpaper (system) - video wallpaper, as shown in picture 4.27;
pic4.27
4.6-3 Automatic rotation
System as the default open, when closed, the system will not rely on gravity induction to shift MID
panel.
4.6-4 Sleep


Click Setting Apps
Click Display
29


Click Sleep
When pop-up the page of sleep time setting, you can choose the sleep time
as you like. See as below picture 4.28;
pic4.28
4.6-5 Font Size
Click Font Size which can adjust font size of the MID, see as below picture 4.29;
Pic 4.29
4.6.6 Screen shot setting show as Pic 4.30
30
Pic 4.30
4.7 Storage
Open setting AppsStorageDEFAULT WRITE DISK, you can choose the preferred
installation space when you install new applications.
Check available space of SD Card and MID.
 Enter into setting Apps
 Click storage to check total space.
Internal storage
Internal storage which is the system files storage space but can not check the content,
see as picture 4.31;
Pic 4.31
31
USB STORAGE
USB Storage is MID NAND memory. If want to check the storage content you can go
to main menufiles managements for checking.
Pic 4.32
SD Card
In the storage you can check the SD Card total space, available, unmount SD Card
and Erase SD Card, and see as below picture 4.33;
Pic 4.33
Remove SD Card safely
 Click setting Apps
 Click storage
 Click uninstall SD Card
32
 Now you can remove the SD Card safely.
Notes: If you remove the SD Card correctly, it can effectively protect it and increse
the usage life of the SD Card.
4.8 Battery
Click settings battery and then to check the battery using status as shown
below:
Pic 4.34
4.9 Apps
1. Please select setting in the application list.
2. Choose application and enter and then you can manage and delet the installed
applications. In the lower left corner you can check the syetem storage space, see as
below picture 4.39;
33
Pic 4.39
3. Check internal storage space; see as below picture 4.40;
Pic 4.40
4. Check the running applications of their usage and available space see as below
picture 4.41;
34
Pic 4.41
4.10 Account
1. Click setting
2. Click Add account, see as picture 4.42;
Pic 4.42
3. For example tap Google, see as picture 4.43;
35
Pic 4.43
4. Once login successfully you can open synchronization function, see as picture 4.44;
Pic 4.44
4.11 Location access
Click setting and choose location access, see as picture 4.45;
36
Pic 4.45
Google Location
When you open Google location, you can fix MID position via WIFI
GPS satellites
Use GPS on your MID which can pinpoint your location
GPS EPO assistance
Use GPS assistance date (EPO) to speed up GPS positioning, but it need
insert SIM Card and generate lots of traffic.
EPO Setting
Tap EPO Setting to check EPO position date and whether it automatically
downloads.
Pic 4.46
GPS
GPS can speed up the fixed time of location via internet when used
A GPS.
Tap A-GPS settings and you can see below picture 4.47;
37
Pic 4.47
Disable after Reboot
Choose disable after reboot the A-GPS will automatically closed when you reboot MID.
Network Request
Use network request to get your location via internet
Network Used
Open network used you can choose the different mode of network, see as picture 4.48;
Pic 4.48
Profile selector
Choose profile selector you can shift them as you like,see as below picture 4.49;
38
Pic 4.49
Location and Google search
Use Location access and Google search, you can use your location
information to improve search result and other services.
4.12 Security
Set up screen lock
You can use password and unlock pattern to lock the touch panel and protect your
MID.
Notes: Once you have set up the screen lock, every time when you reboot and
unlock the touch screen will request to enter your password.
Set up unlock pattern
1.
2.
3.
4.
5.
6.
In the main menu page please click setting Application.
Click the security
Click the Screen lock
In the pop-up text setting area, choose pattern.
Click Next step as it mentioned.
It will pop up unlock pattern screen which has 9 dots. Slide your finger to
connect the dots in any order on the next screen for creating a personal
screen unlock pattern. You need to connect at least 4 dots. See as picture
4.50;
7. Click Next
8. When you see the notice and type again the unlock pattern and click OK.
39
pic4.50
Set up unlock PIN password
In main menu please tap settingsSecurityLock screenin the pop up text set
area choose PINtype new PIN password(finger) and tap Nexttype again new PIN
password and tap OK.
Set up password
In main menu please tap settingsSecurityLock screenin the pop up text set area
choose Passwordtype new Password(alphanumeric) an
tap Nexttype again new Password and tap OK.
Unknown sources
In main menu tap Settings SecurityUnknown sources, see as shown picture
4.51;
Pic4.51
40
Notes: Click unknown sources and then you can install APK files by hand
successfully.
4.13 Language & input
Tap settingLanguage & input. You can choose the language as you need. See as
below picture 4.52;
Pic 4.52
Tap settingsLanguage & inputAndroid keyboard settingsinput language, see as
below picture 5.34;
pic4.53
In the effective input method you can change the default language as you need. See as
picture 4.54;
41
pic4.54
Return to Language & input, tap default to choose input method as you need. See
shown picture 4.55;
Pic 4.55
4.14 Backup and reset
Tap Backup my date after you have logged in Google account and connected Wifi the
system will automatically backup your date to Google server.
For some reasons you have to restore the factory settings, please tap restore the factory
settings.; If you want to format MID NAND, please click on Erase USB Storage and tap
reset tablet is ok. See as picture 4.56;
42
Pic 4.56
4.15 Date and Time
As default setting, system will set the date and time automatically by using
network-provided values.
Set the date and time zone by hand
1. Click settings
2. scroll down the screen and click date and time.
3. Close Automatic date & time
4. Close Automatioc time zone
5. Click Select time zone, and then choose time zone in the list. Scroll down
the screen you can check more time zones.
6. Click set date and tap up and down button to select Day, Month and Year,
thne tap “set” to finish the setting.
7. Tap set time, and tap up and down button to select hours , minutes, choose
AM and PM to set morning or afternoon(it will not support 24-hour format), and
then tap “set” to finish the setting.
8. Click Use 24-hour format, you can shift between 12-hour and 24-hour
format. And the time format will applied in the alarm clock.
9. Click choose date format and choose the date format which will show in
your MID.
43
Pic 4.57
Notes: If you use the time which network provided automatically, you are unable to set
the date and time zone.
4.16 Scheduled power on off
Tap settingsScheduled power
on &
off,to see
belowhere
picture
to set4.58;
Click
here
set as Click
schedule
on
power
schedule power off
Turn
on/off of
schedule
power off
Pic 4.58
4.17 Accessibility
4.17-1. large text
Click Large text can make the system font become larger
4.17-2.Press Power button to end call
With this function, when you make a call and press “power” button, you phone call
44
will automatically hang up but will not turn to sleep
4.17-3.Touch & hold delay
Click Touch & hold delay can adjust the delay time, see as shown picture 4.59;
Pic 4.59
4.17-4. Install web scripts
When you open it system will allow you install web scripts, but it will increase the
security risk when you browser website.
4.18 Developer options
4.18-1 USB Debugging
Once you open USB debugging, it can read the MID with some software. But when it
opened the USB storage need to manually bring up before us.
4.18-2 stays awake
When you open stay awake, MID screen will never sleep while charging.
4.18-3 Cursor position
When you open Cursor position, you can read the touching point operation’s transverse
and longitudinal axis coordinates of your MID
4.18-4 Display touching operation
When you open display touching operation, it will display your touching area of MID.
And it will more accurate and clear when used with cursor position
4.18-5 Display update
When display updates, it will flash in the corresponding place.
4.18-6 Display CPU usage
After opening display CPU usage, upper right corner of MID will display the CPU
usage, pic 4.60
45
Pic 4.6
4.19 About MID
MID status
1Enter the settings application
2 Click About MID. Can view the status information, model No., Android version,
version no. and other information.
3 Click “status information”, Can view the battery status, battery, SIM status, IMEI
No., IP address, etc.
5. Multimedia
5.1 Music Player
In the application menu or on the desktop, click the icon
Player interface, as pic 5.1, select a different way to find songs
46
to enter into the Music
Shuffle
Pic 5.1
Artists
Loop
Playback
Album
Cover
Stop /Play
Song
Name
Last
song
Pic 5.2
Next song
Drag the playback progress bar
to adjust audio playback progress
Music player button operation is shown in pic 5.2
5.2 Video
In the application menu or on the desktop, tap the icon
player interface.
Video player buttons described in pic 5.3
47
to enter into the video
Play/Stop
Adjust
video
playback
progress
Select
the
screen
mode
Pic 5.3
5.3 Gallery
Gallery application can automatically search for photos from the Micro SD card and
video files, And Gallery folder will classify these pictures and video files, You can use
the Gallery application to check and edit photos, check the photos and set it as a
desktop picture
Check Photos
1 In the application menu or on the desktop, tap the Gallery application
2 Enter the gallery, tap the folder to check the included pictures
3 Tap the picture you want to view, the system will automatically view in full screen
mode.
4 Photos can zoom in or zoom out by separate or fold two fingers. Double clicks can
make it too.
Tips: When browse pictures, you can swipe left or right picture to switch picture
Browse
Edit and set picture
View images in full screen mode, press the Menu button to display the menu options,
you can select the options you want to edit and set the picture.
slideshow
1 Open a picture, click the menu button using the virtual keys to display the menu
options
2 Tap the slideshow, it will automatically loop (or tap the icon
in image folder)
Crop
1 Click on the menu button to display the menu options
2 Then tap Corp, drag the relevant regional election to adjust the cutter
3 Tap cutter, drag from center to outside to adjust the crop size.
48
4 Adjust the size you want, tap Crop
5 As abandon cropping, click Cancel to return to picture overview
Edit
1 Click on the menu button to display the menu options
2 Tap Edit
3 In the pop-up options can be brightness, style, color, effect settings
4 Click Save
5 As abandon editing, click the Back key, in the pop-up dialog box, click NO back to
picture browsing
5.4 Camera
In the application menu or on the desktop, tap the icon
to enter into the Camera
interface
Camera operation button and Switching camera as shown in pic 5.4 and pic 5.5
View photos
and videos
Switch front and
rear camera
Click shooting
Slide the zoom
Submenu
Camera
mode
Panorama mode
Pic 5.4
49
Video
camera
Flash light
Back
High
range
dynamic
Adjust balance
light
Settings
Panorama mode
Color effects
Pic 5.5
5.5 FM Radio
In the application menu or on the desktop, tap the icon
interface
Connect Headphones
Select the top right corner button
pic 5.6
to enter into the FM Radio
Enter into the channel list
Open external audio
Menu
Current
frequen
cy
Favorite’s
button
Last
channel
Next
channel
Pic 5.6
Select the search, Then FM band can be found in, as 5.7
50
Play /Stop
Pic 5.7
Favorites: Click the button
on the main interface to add to Favorites
Note: Using FM Radio plug in your headphones as an antenna
If no antenna, you will not be able to search the MID band radio
6 Communication function
6.1 Phone
6 Select the dialing application
7 Operate according to Figure 6.1
Call records
Contacts
Dial-up area
Show number
Call
Function keys
Hide dial pad
Pic 6.1
51
6.2 SMS
6.2.1 In the application menu or on the desktop, tap the icon
interface
to enter into the SMS
6.2.2 Select edit new message
Add
recipients
Input the
phone
number
directly
Send
message
Pic 6.2
6.3 Contacts
In the application menu or on the desktop, tap the icon
interface
to enter into the Contacts
Pic 6.3
Search for contacts: Click the button
to enter into the search function
52
Add contacts: Click the button
to enter into the Add contact interface
7. Movil Teacher
7.1 Device setting
Click the "Setting" icon
to enter in the setting panel.
Pic 7.1
Locate and choose "Language and keyboard" and select "Voice Search"
Pic 7.2
Select "Language"
53
Pic 7.3
Select “English”
pic 7.4
54
Under "Dialect" choose, select English(US)
Pic 7.5
Select "Keyboard and Language", and select "Output of Voice Text" on the
right
Pic 7.6
Select “Language”
Pic 7.7
55
Select in the menu that appears "English (United States)"
Pic 7.8
7.2 USER’S INTERFACE
Pic 7.9
7.3NAVEGACION
The main screen contains the Main Menu of each chapter.
From here you can enter all of the chapters of course.
There are two methods of navigation between chapters.
You can move forwards and back from one chapter to another as shown in the
following image.
56
Pic 7.10
Drag the tabs to navigate between chapters.
Pic 7.11
Drag lessons’ panels for details of that lesson
57
Pic 7.12
In compounds chapters touch tabs to access that section
Pic 7.13
Once you enter a letter or a word in the "search query" in the dictionary, you
can scroll through all the words in the dictionary, or choose the word that
interests you to access more options
Pic 7.14
58
Once you choose a word from the list, you will see the dictionary.
From here you can:
•
•
•
•
•
See the translation of the word.
See the definition of the word.
Practice writing.
Listen to the pronunciation.
Practice your pronunciation of the word.
Pic 7.15
Touch the panels to access the main menu of the lessons in this chapter
Pic 7.16
The main menu of the lessons allows access to each individual lesson and
also displays information about your score and progress in each lesson.
59
Pic 7.17
To unlock the padlock and enter the next lesson, you should get 50% or more
in the previous lesson
Once the lock is opened, you will see the blue button 'play' to begin the next
lesson
As you progress through the chapter, you will have access to more lessons.
You can always go back and review the finished lesson to review topics or
improve your score.
Pic 7.18
The lessons have several different types of activities, all complete with
instructions and guidance. In all the lessons you can find the same
functionality and continuity of concepts of user’s interface.
60
Pic 7.19
8 Internet
8.1 Browser
When wifi or net work is well connected, click
can surf internet. As pic 7.1
61
to input IP address and
Pic8.1
8.2 E-mail
Email application with e-mail setup wizard, can add common Web e-mail
service provider (Such as Yahoo, Gmail and 163 other provider) external
POP3 or IMAP e-mail account. Figure 7.2
Pic 8.2
A E-mail settings
1 After clicking the icon
, E-mail setup wizard will appear to help you set
up
62
2 Input your email address and password for the email account
3 Click the Next Step button to check the mail server is available transceivers
4 Input the account name and email name, then tap Done
5 If the mailbox is available, will automatically enter your inbox
B Delete mail account
You can delete the set up POP3 or IMAP email account from your MID
1 taps the icon
2 Enter into your inbox
3 Click the Menu key
4 Tap the Settings
5 Right down select Delete Account
6 Click OK to remove
C Send E-mail message
1 Tap
to display your inbox
2 Click the e-mail inbox will automatically refresh, click to read
3 Click the Menu key to pop up the menu
4 Tap the top right corner
; enter into edit new mail interface
5 input the recipient's e-mail address
6 Input a subject and message content
7 Click Add Attachment
8 Select the attachment you want to send (such as pictures, video, etc.)
9 Click the Sending key to send an e-mail
Add
Attachment
Pic 8.3
63
9 GPS function
9.1 GPS positioning
1 MID built-in GPS precise positioning satellite signal receiver. But available
map is provided by third party.
2 Enter into the setting interface, click on the icon
, enter in pic 9.1
Pic 9.1
After successfully positioned, blue part will be transformed into green. And
display the latitude, longitude and altitude, speed, position location time. pic
9.2.Satellite value represent positioning signal of the intensity,
Positioning time associated with the choice of setting time zone range. If time
does not match with positioning location time, please check your time zone
selection is correct
64
Return
Satellite
value
Pic9.2
Satellite No.
10 Other Applications
10.1 Clock
In the application menu or on the desktop, tap the icon Clock to enter into the
Clock interface, Figure 9.1
Click the alarm settings, alarm clock can be set
Clock
Setting
pic 10.1
65
10.2 Calculator
1 Tap on the icon
2 Enter The calculator basic panel
3 Touch counter number on the panel or operator to calculate
pic 10.2
10.3 Explorer
Explorer with the TF card files or folders to copy, cut, delete, rename and other
operations
can also share the file, install apk and other functions
In the application menu or on the desktop, tap the icon
Explorer interface, Figure 9.3
66
to enter into the
Pic10.3
A. Some operationgs, such as copy, cut, delete, rename, etc. Select a
folder or file, long press a folder or file to enter into Figure 9.4 Interface.
pic 10.4
B. Paste the copied or cut file or folder: on the directory you want to paste,
you can select the icon
paste
in the upper right corner to
67
Pic10.5
C .Share the file: Select a file and long press this file, In the top click on " " In
the pop-up list, select "Share" item. According to the pop-up list to select the
way you want to share
Pic 10.6
D. Install apk file: select the suffix. Apk file on the Explorer, pop up the
installation program, follow the prompts to install third-party software
E. Create new folder: Select the folder you want to create the directory, Click
the right button
, select the Creat New Folder, Follow the prompts to
68
complete the Creat New Folder
10.4 Recorder
In the application menu or on the desktop, tap the icon
Recorder interface, Click the Record button
Stop button
to enter into the
to start recording, click the
to stop recording. Just click the play button
to play the
recording, the system automatically prompts to use this recording or to give up,
please manually select.
Play recordings: Select to use audio player audio, in accordance with the
Explorer select the audio files, and click to play
Figure10.7
69
11 Application Installation
11.1 Installation
Install third-party applications
1 Tap on "Explorer" application, select the application you want to install
2 Press and hold the application you need to install
3 Pop-up installation options, click Install apk
4 Follow the installation wizard to complete then can be run.
Note: Applications only with APK suffix are compatible with system.
11.2 Uninstall
Uninstall application
1 On the Home screen, tap Settings bitmap
2 Tap the application that lists all the applications installed on the system list of
programs
3 Tap the APK you want to uninstall, click Uninstall
4 Click OK to complete the uninstall
Tips: system pre-installed program manager can easily achieve uninstall,
Open the Program Manager, click on Uninstall tab, the system will list the
installed application lis
70
12 Troubleshooting
1. Turn on MID slowly for the first time
。After MID system upgrading, the first time turn on the MID need to
install the pre-installed applications, time in about 2-3 minutes.
But it will faster later.
2. Device can not connect to Wi-Fi

Ensure the router works well.

Ensure the device and the wireless router is within the range
of the wireless network to be connected too. Walls or other
obstructions will reduce the possible distances between
wireless devices

Ensure the security password being used is correct
3. Heat Issues
When running multiple applications, using the screen on its
brightest setting, or when being charged, this device can get
quite hot. This is normal and should not cause any
inconvenience when in use
4. Cannot set E-mail Account or registration application
5.

Ensure that the tablet is connected to a Wi-Fi network and
can connect to the Internet

Ensure your E-mail settings have been entered correctly for
the account being accessed

Make sure your system time and local time is the same.
System has anomalies and doesn’t work correctly
Installing some third-party applications may cause the system to operate
incorrectly. Press the RESET button and perform a system reset to resolve this
issue
6. Unable to open the webpage
 Ensure the wireless router and MID device is within the
range of the wireless network
 Please restart WIFI and try again
7. MID runs slowly
This is normal, Please close some applications which temporarily do not need
to use the in Advanced Task Manager, Uninstall some third-party applications
to free up more system resources.
71
13 Updating Instruction
1. Press the “POWER button to turn off the device before updating (NOTE: Press and
hold the “POWER button for at least 10 seconds if the device can not be turned on
normally).
Insert the Driver CD and copy the file named “MTK Android Upgrade Tool” to your
computer desktop (NOTE: The device can not be updated directly from CD).
Open
file
“
SP_Flash_Tool_v3.1332.0.187
shown as below picture.
It shows as below picture after open the tool.
72
”
and
double
click
2. Click button“Scatter-loading”in the right, Choose file “Upgrade file”“MT8312_Android_scatter.txt”, then click “Open”,shown as below picture.
3. After device has been turned off; connect the device to the PC by the USB cable
supplied with the device.
Choose “Install from a list or specific location (Advanced)”, and then click “Next” ,see the
picture below:
73
Choose“Include this location in the search”- “MTK Android Upgrade Tool” >
“Driver_Auto_Installer_v1.1236.00” > SmartPhoneDriver > “x86” > “Infs”,
Click“OK”. Shown as below picture.
Then click “NEXT”,The system will detect and install the driver automatically, finally click
“Finish”,
see
the
pictures
as
below:
74
The “Found New Hardware Wizard” window will pop up on the bottom right corner as
shown below.
75
4. Pull out USB cable,then click “Firmware->Upgrade”
5. The upgrade process begins, shown as below picture (please reconnect the tablet pc to computer
if it shows that it is being charged)
76
6. When the upgrading is 100% done ,
“Download OK”pops up. The upgrading process is done,
and USB cable can be pulled out.
7. NOTE: Please don’t disconnect the USB cable during the updating process because this will
cause update failure or possible system failure of the device.
77
FCC RF EXPOSURE INFORMATION:
WARNING!! Read this information before using your phone
In August 1986 the Federal Communications Commission (FCC) of the United States with its action
in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio
frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are
consistent with the safety standard previously set by both U.S. and international standards bodies.
The design of this phone complies with the FCC guidelines and these international standards. Use
only the supplied or an approved antenna. Unauthorized antennas modifications, or attachments
could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the
phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn
may result. Please contact your local dealer for replacement antenna.
BODY-WORN OPERATION:
This device was tested for typical body-worn operations with the back/front of the phone kept 0cm/10cm
from the body. To comply with FCC RF exposure requirements, a minimum separation distance of
0cm/10cm must be maintained between the user's body and the back/front of the phone, including the
antenna. Third-party belt-clips, holsters and similar accessories containing metallic components shall
not be used. Body-worn accessories
that cannot maintain 0cm/10cm separation distance between the user’s body and the back/front of the
phone, and have not been tested for typical body-worn operations may not comply with FCC RF
exposure limits and should be avoided.
For more information about RF exposure, please visit the FCC website at www.fcc.gov
Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is
ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal
Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards previously set by
both U.S. and international standards bodies:
 (1992) /  (1986) /  (1999)
Those standards were based on comprehensive and periodic evaluations of the relevant scientific
literature. For example, over 120 scientists, engineers, and physicians from universities, government
health agencies, and industry reviewed the available body of research to develop the ANSI Standard
(C95.1). Nevertheless, we recommend that you use a hands-free kit with your phone (such as an
earpiece or headset) to avoid potential exposure to RF energy. The design of your phone complies
with the FCC guidelines (and those standards).
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications,
or attachments could damage the phone and may violate FCC regulations.
NORMAL POSITION:
Hold the phone as you would any other telephone with the antenna pointed up and over your
shoulder.
RF Exposure Information:
This product is compliance to FCC RF Exposure requirements and refers to FCC website
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID: BRCPC7088 to
gain further information include SAR Values.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
Do not use the device with the environment which below minimum -10℃ or over maximum 50℃,
the device may not work.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Ad Hoc function is supported but not able to operate on non-US frequencies.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2014:12:30 14:41:36Z
Creator Tool                    : Microsoft Office Word 2007
Modify Date                     : 2015:01:22 17:51:26+08:00
Metadata Date                   : 2015:01:22 17:51:26+08:00
Format                          : application/pdf
Creator                         : 微软中国
Title                           : 目  录
Producer                        : Microsoft Office Word 2007
Document ID                     : uuid:20468060-98e7-4668-9d51-e3d890f74ab1
Instance ID                     : uuid:1fdc8758-2367-4a05-8024-7916f3856c29
Has XFA                         : No
Page Count                      : 79
Language                        : zh-CN
Author                          : 微软中国
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BRCPC7088

Navigation menu