Kinyo ARTDIOBT132 2.0 Portable Bluetooth Stereo Speaker User Manual
Kinyo Co., Ltd 2.0 Portable Bluetooth Stereo Speaker
Kinyo >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 973598 |
| Application ID | kBcvuAUnU9zgN4kDp5w7EQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 227.99kB (2849814 bits) |
| Date Submitted | 2008-07-20 00:00:00 |
| Date Available | 2008-07-20 00:00:00 |
| Creation Date | 2008-07-16 15:03:23 |
| Producing Software | Adobe Acrobat 7.0 Image Conversion Plug-in |
| Document Lastmod | 2008-07-18 15:51:37 |
| Document Title | User manual |
| Document Creator | Adobe Acrobat 7.0 |
ARTDio®
BT- 1 3 2
2.0 PORTABLE BLUETOOTH® STEREO SPEAKER
User’s Guide
Guide De L’utilisateur
Guia De Uso
w KINYO |ARrDio
www. kinyo.com
Please read and understand all safety instruction before use.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by Kinyo Company is under license.
12555500
LIMITED WARRANTY
Kinyo Company Inc. (KINYO) warrants this product to the original purchaser against defects
in material and workmanship for a period of one (1) year from the date of purchase. Kinyo will.
at its option, repair or replace the defective product at no cost to you during the warranty
period.
The warranty will not apply if the unit has been subject to accident, misuse, abuse,
disassembly, altered or operated contrary to the instructions contained in the accompanying
manual.
To obtain warranty service, proof of purchase, in the form of retail receipt, bill of sale or invoice
must be presented as evidence that the unit is within the warramy period. The product must
be packaged either in its original package or in such a way as to reasonably protect it from
shipping damage. Properly fill out the warranty card with description of problem. Send the
product freight prepaid or deliver to:
A1TN: SERVICE DEPT. KINYO COMPANY INC.
14235 LOMITAS AVE. LA PUENTE, CA 91746
ONE YEAR LIMITED WARRANTY CERTIFICATE
NAME
ADDRESS
CRY STATE
PHONE EMAIL
DATE OF PURCHASE WHERE PURCHASED
PROBLEM
SIGNATURE
@KINYO IARTDio
14235 LOMITAS AVE, LA PUENTE, CA 91746
WWW.KINYO.COM
IMPORTANT SAFETY INSTRUCTIONS
Please read and understand all safety instructions before use.
- Read these instructions.
0 Keep these instructions.
- Heed all warnings.
0 Do not use this apparatus near water.
0 Clean only with dry cloth.
0 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
0 Do not push objects into apparatus vents or slots because fire or electric shock hazards
could result.
0 Maintain a minimum distance of at least 6 inches around apparatus for sufficient ventilation
0 Ventilation should not be impeded by covering the ventilation openings with items such as
newspapers, table cloth, curtains, etc.
0 No naked (open) flame sources, such as lighted candles, should be placed on or near apparatus.
0 Place apparatus in a stable location so it will not fall causing product damage or bodilyhann.
0 Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus Gncluding amplifiers) that produce heat.
0 Do not defeat the safety purpose of the polarized plug. A polarized plug has tow blades
with one wider than the other. The wide blade is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Operate the apparatus only from the low level audio line output jack of the computer or of
an audio device.
0 Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
0 Only use attachments] accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
0 Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
0 The apparatus shall be disconnected from the mains by placing the power/standby switch
in the standby position and unplugging the power cord of the apparatus from the AC
mains receptacle.
0 The socket-outlet shall be installed near the equipment and shall be easily accessible.
Iillii on murmurs
“Sumo-arm m nnmnrt nun urn? swarm Iii mam amuse nit msrt or arm": tuna, rm Til
llIIIUFIE! SERVICE rtmrrrra.
mmemmsnoflm
Mhmdufihwfimicfiriprwddnldmihwdwiflrm
Wilma!“ mmamwmvndwd
“Emflfieflmh u m.
_Thhhmrl1'rnttryhuynbnihxdm nunqupdngng.
The mllmadon point within an equilateral triangle is The lighting flash with arrowhead symbol with an equilateral triangle
intended to alert the user to the presence of important is intended to alert the userw the presence or uninsuleted
operating and maintenance irarvidng) instructions In dangerous voltage within the product's enclosure that may be of
the literltme accompanying the appliance. sufficient magnitude to constitute a risk of electric shock to persons.
6 ! mmrtsmnmrru TIIE IISI HF Fill (Ill ELEI'RIGSIIIIGL Il|l III'I' memnmntm
munouflo HEillcE THE “OF BETH!!! SINK.
DO MT REMOVE GOVEROR BACK
N0 USER—MAKE PARTS IMSlDE
REFE! BEWNG TO OUAIJFED was PmNEI.
For the following equipment: Notebook with WLAN module BT— 132
(G 0984
Is herewith confirmed to comply with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating to
Electromagnetic Compatibility (2004/108/EC), Low—voltage Directive
(2006/95/EC) and the Amendment Directive (93/68/EEC), the procedures given in
European Council Directive 99/5/EC and 2004/108/EC.
The equipment was passed. The test was performed according to the following
European standards:
ETSI EN 301 489—17 V1.2.1: 2002
ETSI EN 300 328 V1.7.1: 2006
EN60950—122006
INTRODUCTION
Artdio's BT-132. is a 2.0 Bluetooth Stereo Speaker. compliantwith Bluetooth version 1.2
class 2. The BT-132 supports Bluetooth AZDP', AVRCP', Headset and Hands-free prollIee.
The system Is capable ol streaming music from mobile phones, MP3 players, portable
media players, PDA's, computers and other audio devices wi Bluetooth AZDP enabled.
This system operates ereIessttrom audio sources up to 33 feet (10 meters ) away open
space. The built-in microphone, enables to eesil answer phone calls hands-lree through
the system. The system also comes with an auxlllary inputthat will oonnect aII Iine in audio
sources .
1) The playback and Its plug-In Bluetooth adapterltransmltter/devlce needs to supportAZDP
(Advanced Audio Distribution Profile).
2) The playback and its plug-in Bluetooth adapter/trenemitterldevice needs supportAVRCP
(Audioneo Remote Control Profile).
Inside the Compartment
“ON/OFF Switch
a) 0 : Slide switch to the right torBluetooth operation. (Blue 'Artdio' LEDwiII light)
b) OFF: Slide switch to the middle wIII tum the system off.
7 c) Aux: snag switch to the on rAuxIIIary Input. (em ‘Artdlo' LED will light)
QPdmr LED Indicator 'Artdio :B|ul LED 'Artdio" light will illuminate when power is on.
6) H4 IPress to play the previous selection. (only during Blueroolh operation)
(9 M : Press to play the next selection. (only during Bluetooth operation)
9 HI Ir:PAIRINGIPLAYIPAUSEI can. (only durmg Bluetooth operation)
a ) PAIRING: Inlllate the pairing mode from the speaker to the Bluetooth enabled device
by pressing and holding the Pairing button " NI "forthree seconds. The Bluetooth LED
will llash blue light three times. Release the button and the Bluerooth LED will then llash
blue and red lights alternately to indicate that the speaker is in Bluetaolh pairing mode.
Please see d led pairing instru lens on PAGE 5.
Note: Ifthe p ng process cannot be completed within SD seconds. the blue and red
Bluatoom LED will stop Ila-hing and the Bluetcoth pairing process will automatically
terminate. Please repeat the pairing Instmctlons to paIr up the Bluetooth speaker with
the Bluetooth enabled device.
b) DIBCDNNEGTING BLUETOOTHOONNECTION: To disconnect the Bluetoolh
wireless connection. press and hold the " HI " button again torthree seconds. The
Bluetoolh LED will flash blue light three times to Indicate the Bluetooth algnal Ie
disconnected.
c) ANSWERINGIENDING CALLS: To answer the " HI " button on your Bluerooth device
(when connected to the Bluetooth speaker) press the butmn to pick up the call. Press
again to end the cell.
d) PLAY/PAUSE: Press ' HI ' button to play the selection. press again to pause.
®BLUETOOTH PAIRING LED Indleetorl Low Battery Indlcator:
a) BLUEOOTH PAIRING LED Indlutor:
The Bluetooth LED will flash blue and red light alternately to indicate that the Bluetooth
speakerenters pairing mode. When the Bluetooth device has successfully paired and
connected with the Bluatooth speaker. The Bluelooth LED will flash blue light constantly.
Iflhe Eluetucth connection is disconnected. the blue LEDw flash three times to
Indicate the Bluetooth signal Is disconnected.
b) Lew Battery Indicator: Red LED IndIcatcrwIII flash when battery Is low. (only during
Bluelooth operation)
OVDL-: Press to decrease the volume.
('WDL Press to“ mcrease the volume.
6) Q The BuIIt- In Microphone I: located on the bottom of the system.
Note: Make sure your Bluatooth enabled device Is connected with the Bluetooth speaker.
When the phone rings on your Bluetooth enabled devlce press the pelrlng' HI ll" button
to answer the call. You will be able to talk hands-tree through the microphone. Press the
Pairing “Hllf " button again to end the cell.
(Down here to remove compartment cover.
“'DC IN: PIugAC adapter (Included) Into a all outlet. Connect the other and to the 'DC
IN'jaek.
CDBattery Compartment.
$3.5mm stereo Input Geble- Connecting lo your portable audio device.
POWER SOURCE
Use CINE ol' the following options to power the speaker:
Ac Power (Wal u t
1. PIugAG adapter into a wall outlet. Connect other end to the "Dc IN" jack on back of
thesy stem.
Dc Power (Batteries)
1.Instal| 4MAbatterles not Included) Into the battery compartmenton the back ofthe
system. Make sure the atlerles are Installed as Illustrated.
2.When the betta powa II low, the Bluetooth LED will flash red light ind ing it is
time to replace atteries. only during Bluetoolh operation). Do not mix rent or
new and used batteries.
PAIRING WITH BLUETDOTH ENABLED DEVICES
You need to pair the system with your Blualoofh device before using.
£1"
honest-rs-
»uw-t up".
maul-u.
.,..._ y...
when Initiating the pairing,
\ keep the distance between the
§ — . system and the Bluetooth
wireless technology enabled
device less than 3 Feet 1 meter).
Make sure there is no at er
Bluetooth wireless technogy
er-lsz enabled device nearby.
Pairing Is the process of associating your speaker with Blutooth enabled devices. Palrlng
establishes a permanent securit link between all devices using Bluetaclh wireless
technology; You will be [prompts to enter a PIN (personal identification number) to
ostabllsht e Inltlsl palr ng.Afterthe pairing Ia successful, you will not haveto ro-snterlt
again. The device remembers the PIN and will automatically connect to the speaker.
The following pairing instructions describe the pairing process between the speaker and
a typical Bluefoaftr audio source. The pairing process me be different for your Bluetoorh
enabled devices. Ifycu have problems pairing, please rid the users gulde ol your
specific device fordetallad paIrIng Instructions.
PAIRING WITH ANY BLUETOOTHAZDP ENABLED DEVICES
1. Turn on Blustooftr speaker by slldlng ONIOFF switch to rlghtfor " e " (Bluefoollr). Press and
hold Fslrlng button ' bl " forthres seconds, until the Pairing LED flashes blue Ilghtthrea times.
2. Release the button. The Blustooth Palrlng LED will flash blue and red light alternately,
Indlcatlng that the Bluetcofh speaker and the Bluefoolh enabled device are In the pairing mode.
3. Turn on the EIIIDMGIH settings on your Bluetoofh enabled device. Then perform a search for
Bluetooth devices In range.
4. Your Bluemofh enabled device will display a new device named ‘ARTDIO' on the Eluetoofh
Device List.
5. Select 'ARTDIO' from the Bluefooth Device List.
5. You are prompted to enlera PIN. Enteritis default FIN 91 '0000.'
7. When the Biuetooth LED flashes blue light constantly. it indicates that the pairing process has
been completed successlully. Vourcomputer and the Eluelooth speaker are now connected
through Blueioofh wireless technology.
a. The screen on your Blustooth enabled device should displays Ell/steam (a) or audio Icon
(rim / {a )to Indicate Bluelooth connection.
NOTE: If the pairing process cannot be completed within 90 seconds, the blue and red
Bluatoofh LED stops flashing and the Blusloolh pairing process will automatlmlly terminated.
Please repeat the pairing Instructions to pair up the speekerwlth the Bluefoottr enabled device.
a. Select music on your Bluefoofh device to playwlreiessly through your BT—132 speaker system.
Refer to the user's guide oI your Bluatootl'l enabled device for more detailed Instructions.
PAIRING WITH BLUE—TOOTH ENABLED COMPUTER
1. Start the Eluelootlr application on your computer. the perform a search for BIuetooth
enabled devices In range.
2. Turn on Bluetooth speaker by sliding ONIOFF switch to rightfor " 0 '. Press and hold
Pairing button " Nl' forthree seconds until the Pairing LED flashes blue light three times.
3. Release ths button. Ths Elli-tooth Palrlng LED will flash blue and red light alternately
indicating the Blueloct‘h speaker and Bluefoofh enabled device are in the pairing mode.
4. Your computershould new display a new device named ‘ARTDIO‘ on the Bluetooth
Device List.
5. Select 'ARTDIO' from the Bluetooth Device Llst.
8.You are prompted to entera PIN, enterthe default PIN of'OUDO.‘
7. When the Bluetooth LED flashes blue light constantly, It Indlcatea the pairing process
has been completed successfully. Vour computer and the Bluei‘oofh speaker are now
connected through Bluetooth wireless technology.
NOTE: If the pairing process cannot be completed within 90 seconds, the blue and red
Bluetoofh LED stops flashing and the Bluefcoth pairing process will automatically terminated.
Please repeetthe pairing instructions to pair up the speaker with the Blueloclh enabled device.
8. Sslact music on your computarto playwlrelaasly through you BT-132 speaker system.
Refer to the user's guide of your Eluetoath application for more detailed instructions.
PAIRING WITH A COMPUTER WITH A BLUEI'OOTH USB ADAPTER
1. Forall computers that are not Bluefboth enabled, plug In the Bluefoofh USEAldapter Into a
USE port on your computer. Install the software If required (refer to the usel‘s guide for
detailed Instructions for software Installation)
2. Start the Blueiooth application on your computer. Perform a seam for Bluefcctll devices in
range.
3. Turn on Bluelaoth speaker by sliding ONIOFF switch to right Ior'fl ", then press and hold the
Pairing button 'Pl| “ forthree seconds. until the Pairing LED flashes blue light three times.
4. Release the button. The Eluetooth Pairing LED will flash blue and red Iightaltemately,
Indicating that the Elueiootrl speaker and the Bluetcoth device are In pairing mode.
5. Yourcomputer should nowdlsplay a new device named "ARTDIQ‘I on the Blueiooih Davica
List.
6. Select 'ARTDIO" from the Bluefoofh Device List.
1. You are prompted to enter a PIN. Enterthe default PIN of‘0000.'
8. When the Bluetoofh Pairing LED flashes blue light constantly, it indicates that the pairing
process has been completed successfully. Your computerand the Eluetooth speakerare now
connected through Elusive"! wireless tedlnclcgy.
NOTE: If the pairing process cannot be completed within 90 seconds. the blue and red
BIuelloclh LED stops flashing and the Bluetcolh palrlng process will automatically terminated.
Please repeat the pairing Instructions to pair up the speekerwlth the Bluelbofh enabled device.
9. Select music on your computerto play wirelessly through your BT—132 speaker system.
Referto the user's guide of your Bluetooth USB adapterfor more detailed Instructions.
USING YOUR BLUETOOTH SPEAKER
Using Your Bluelootlr Speaker for Wireless Music
1. Select muslcfrom your Blustoolh enabled device and play wirelsssly through the speaker.
2. Press VOL+ or VOL- to adjust the volume.
3. Press l« or »l to play previous or next selection.
Using Your Bluetooth Speaker for Hands-free Call
1. If the phone rings from your Bluetooth enabled device, press the " HI I l' " button to answer
the phone. Enjoy your conversation hands-free through built-in microphone.
2. End the call by pressing the " HI I t‘" button again.
3. Music will resume after the call.
CONNECTING TO OTHER AUDIO SOURCES
Connect to other audio sources such as iPod, MP3 players. portable CD players, portable
game consoles and computer using attached auxiliary input cable.
1. Be sure to disconnect all Bluetooth wireless connection. Press and hold the Pairing
button "HI " for 3 seconds. The Pairing LED will flash blue light three times to indicate the
Bluetooth wireless is disconnected.
2. Slide ONIOFF Switch to left “AUX" for auxiliary input before connecting to other audio
sources.
3. Open the compartment cover on the back of the system. Remove the 3.5mm stereo
input cable, close the compartment cover and connect the cable to the audio output
on your audio source. (iPod, P8P”, MP3 player, portable CD players, computer, etc.)
4. Turn on the audio source and play music.
5. Press VOL+ or VOL- to adjust the volume.
Specifications for Bluetooth:
SPECIFICATlONS Biuetoofh v1.2 Compliant
04 Watts Total RMS Bluetooth Radio Class 2
oPre-Amplitied & Magnetically Shielded 2.4GHz-2.48356Hz ISM Bandwidth
02 Watts per Channel Supports Bluetooth AZDP, AVRCP, Headset
Q x 11/2" Full Range NdFeB Drivers and Hands-free Profiles
- Frequency Response: 120Hz~20kHz Up to 33 Feet Operating Range (open space)
oSignal Input: Bluetooth, 3.5mm Stereo izffigfiit’lfa‘ifg’rf’ts Pairingt E“°'Vp“°"'
°BPi!t'i" Sluetooth Receiver No software Installation is Needed
oDIgltal Signal Processing
eBuiIt-in Microphone
- - This equipment has been tested and found to comply with the limits for a
‘Amphfled By Class D Ic Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
. Functions: Power, Volume COFNCFO'S, are designed to provide reasonable protection against harmful
. . . interference in a reSIdential installation. This equipment generates, uses
Talk] Palrlngl Play! Pause, Prewous, and can radiate radio frequency energy and, if not installed and used in
Next accordance with the instructions. may cause harmful interference to radio
communications. However, there is no guarantee that interference will
. LED Indicators: Power Indicator, not occur in a particular installation. If this equipment does cause harmful
- interference to radio or television reception, which can be determined by
B’UBtOOth/ LOW Battery Indlcator turning the equipment off and on, the user is encouraged to try to correct
. Power Source: AC [ DC Adapter (DC the interference by one of the following measures:
- Reorient or relocate the receiving antenna,
6V 1A), Battery (4 XAA 1 .5V) 0 Increase the separation between the equipment and receiver.
- - - . Connect the e ui ment into an outlet on a circuit different from that
. Unlt Dimensmns: ws.72" x H2.48" x 02.13 to which the ecu-De. is connected
. Consult the dealer or an experienced radiofTV technician for help.
FCC Caution: Any changes or modifications not expressly approved by
ACCESSORIES the party responsible for compliance could void the users authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
- IMPORTANT NOTE:
Carrying Bag x 1 ACIDC Adapter X 1 FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
Federal Communication Commission Interference Statement
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2008:07:16 15:03:23+08:00 Creator : Adobe Acrobat 7.0 Modify Date : 2008:07:18 15:51:37+08:00 Page Count : 5 XMP Toolkit : 3.1-701 Metadata Date : 2008:07:18 15:51:37+08:00 Creator Tool : Adobe Acrobat 7.0 Format : application/pdf Document ID : uuid:fa8a7bac-8714-4549-a27f-9442da998b66 Instance ID : uuid:1f87dab3-f45e-4bbf-bdae-eb4c0e8dba56 Producer : Adobe Acrobat 7.0 Image Conversion Plug-inEXIF Metadata provided by EXIF.tools