Kirby Sentria Vacuum Cleaner Users Manual Owner's

Sentria to the manual 7abe571e-9f92-4fe9-8f2f-c6cb16aad1d2

2015-02-09

: Kirby Kirby-Sentria-Vacuum-Cleaner-Sentria-Users-Manual-568290 kirby-sentria-vacuum-cleaner-sentria-users-manual-568290 kirby pdf

Open the PDF directly: View PDF .
Page Count: 72

Congratulations

Kirby Sentria in Moscow - $2000 - Tel: (495) 506-9032

Dear Kirby Customer,

Congratulations on your purchase. You now own a superior,

complete home care system designed to help make your home

and furnishings look better and last longer. Most importantly,

repeated use of your Kirby Sentria™ system will give you the

type of clean in-home environment you want and deserve.

This use and care manual is designed to help you get the most out

of your new Sentria home care system and enjoy its numerous ben-

efits and features. The Owner's DVD (where available) will give you

step-by-step instructions on your machine's operation. Your local

distributor is available should you have any further questions.

The Kirby Company, the hallmark of innovation and quality for

over 90 years, sells through the in-home sales method in over 70

countries. We want you to know that every customer is important

to us and that we sincerely appreciate your business.

Please enjoy your Sentria home care system to its fullest!

This manual is written for use with the Kirby® Sentria™ home care system.

For assistance, contact your local authorized distributor.

The Kirby Company, 1920 West 114th Street, Cleveland, Ohio 44102, U.S.A.

USA Parts and Supplies (1-800-437-7170), imd@kirbywhq.com

USA Consumer Relations (1-800-494-8586), consumer@kirbywhq.com

Russia Parts and Supplies (7-495-506-9032), info@kirby.by.ru

www.kirby.com, Russia: www.kirby.by.ru

Kirby, Micron Magic, Splitsecond, Splitsecond 2, Scuttle, Odorific, Tech Drive, Miracle Waxer, Handi-Bulter and Mini Em-Tor are

registered trademarks of The Scott Fetzer Company.

Sentria is a trademark of The Scott Fetzer Company.

Important Safety Instructions

WHEN USING AN ELECTRICAL APPLIANCE, BASIC PRECAUTIONS

SHOULD ALWAYS BE FOLLOWED.

BE FAMILIAR WITH ALL THE IMPORTANT SAFETY INSTRUCTIONS

BEFORE USING YOUR Sentria HOME CARE SYSTEM.

WARNING

- To reduce the risk of fire, electric shock or injury:

• Do not leave appliance unattended when running or plugged in. Unplug from outlet when

not in use and before servicing.

• Do not use outdoors. Use only on dry surfaces or with the Kirby Carpet Shampoo System.

Do not expose to rain. Store indoors.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

Do not let children use the cleaner unattended.

• Use only as described in this manual. Use only manufacturer's recommended attachments.

• Do not use with damaged cord or plug. If appliance is not working as it should, has been

dropped, damaged, left outdoors or dropped into water, return it to a factory authorized

distributor or service center.

• Do not pull or carry by cord, use cord as a handle, close doors on cord, or pull cord around

sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not handle plug or appliance with wet hands.

• Do not put any object into openings. Do not use with any opening blocked; keep openings

free of dust, lint, hair and anything that may reduce airflow.

• Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.

• Do not use to pick up anything that is burning, smoldering or smoking, such as cigarettes,

matches, glowing particles or hot ashes.

• Do not use to pick up combustible materials.

• Do not use without dustbag and/or filters in place.

• Turn unit OFF before unplugging the cord.

• Use extra care when cleaning on stairs.

• Do not use to pick up flammable or combustible liquids, such as gasoline or use in confined

areas where flammable or combustible vapors are present.

• When using the Carpet Shampoo System, do not use flammable or combustible liquids to

clean carpet or floor.

• When using the Floor Care System, use only genuine Kirby® cleaning products or

commercially available floor cleaners or waxes intended for machine operation.

• Unplug the cord from the wall outlet and let the motor come to a complete stop before

attempting any cleaning, service or changing accessories.

• This appliance is provided with Double Insulation. It must be serviced by a factory authorized

distributor or service center using genuine Kirby parts to maintain safety and to protect your

warranty. See page 59.

• Keep all Kirby chemicals out of the reach of children. These chemicals may cause irritation

or discomfort if swallowed or placed in the eyes.

• Do not use flammable or combustible fluid in the Portable Sprayer.

• Do not use pesticides or chemical products in the Portable Sprayer that may affect or damage

the human respiratory system, eyes or skin.

• To avoid irritation or damage to eyes or ears, keep the massage cup and all other accessories

a safe distance away.

• Always use safety glasses when turbo sanding.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

The Sentria™ Model G10D is Listed and Certified by Underwriters Laboratories Inc.

and Canadian Standards Association as a double insulated appliance. The Model 293006

and 295006 Carpet Shampoo System, Model 293106 and 295106 Floor Care System,

Model 293506 Zippbrush, Model 293206 Turbo Accessory System and Model 298806

and 298906 Handl-Butler® Tool are also Optional Accessories for use with this Kirby®

model. Outside North America, the 230/240 Volt model G10E, and the 100 Volt model

G10J products are approved by national test authorities as appropriate.

Table of Contents

Important Safety Instructions

About this Manual

Kirby® Micron Magic® HEPA Filtration

Part 1 - Getting Started

Moving Your System/Handle Tilt Latch Lock/Toe-Touch Control 7

Power Nozzle Height Adjustment/Tech Drive® Power Assist 8

Installing/Changing Disposable Filter Bags 9

Bag Support Strap/Mini Em-Tor® Collector/The Belt Lifter 10

Part 2 — Upright & Portable Cleaner

Upright Cord Management 13

The Upright Cleaner 14

Straight Suction Cleaner 15

The Portable Cleaner 16

Part 3 — Canister Cleaner & Attachments

Converting to a Canister Cleaner/Installing the Attachment Hose 19

Extension Tubes/Surface Nozzle/Duster Brush 20

Upholstery Nozzle/Crevice Tool/Wall & Ceiling Brash 21

Massage Cup/Suction Control Grip 22

Using Your Sentria System as a Blower 23

The Portable Sprayer 25

The Portable Shampooer 27

Part 4 — Optional Accessories

The Carpet Shampoo System 30

Kirby Guard Carpet & Upholstery Protector 36

The Miracle Waxer® - Floor Polisher 37

The Floor Care System - Floor Buffer 39

The Floor Care System - Carpet Fluffer 41

The Turbo Accessory System 42

The Zippbrush 45

The Handi-Butler® Tool 46

Part 5 — Operating/Maintenance Tips

Changing the Power Nozzle Belt 55

Adjusting the Brush Roll Height 56

Miscellaneous Parts Replacement 58

Questions and Answers/Troubleshooting 59

Other Fine Kirby® Cleaning Products 64

Index

Expanded Illustration of the Sentria model & Accessories

If you have any questions regarding your purchase or the operation of your Kirby Home Care

System, please contact your local authorized distributorship:

You may contact The Kirby Company's Consumer Relations Department by:

e-mail consumer@kirbywhq.com mail Consumer Relations

telephone 1-800-494-8586 1920 West 114th Street

fax 216-529-6146 Cleveland, Ohio 44102

Our business hours are 8:00 a.m. to 5:00 p.m. Eastern Time, U.S.A. Monday through Friday.

About This Manual

This Owner's Manual was designed to be easy to read and follow. It has been organized in

sections based on the various ways you may use your new Kirby® Sentria™ system. Within

each section, simple step-by-step illustrations will help you easily visualize the steps required to

properly operate your new Sentria system and its many attachments and optional accessories.

Please note: Illustrations and descriptions of each part of your new Sentria home care system

can be found in the rear of the manual. Please refer to these illustrations and corresponding (#'s)

as you read the manual.

In addition to the Table of Contents on page 3, you will also find an Index on page 66 that

will refer you to the information you require.

We sincerely hope this Owner's Manual will help you obtain years of satisfactory world-class

performance from the Sentria home care system by Kirby.

MICRON

MAGIC®

• • • • HEPAFILTRATION

With MicroAllergen Technology

You bought the best; you expect the best. That's why the Kirby Company developed the

Micron Magic HEPA (High Efficiency Particle Arrest) Filtration System featuring the latest

in clean air technology without sacrificing tremendous airflow.

Your new Sentria™ system includes our BEST filters:

• Traps over 99% of particles as small as 0.3 microns

• Rated HEPA 11

• Minimizes bag odor

So, what does this mean?

Improved Indoor Air Quality!

These improvements are a part of the Kirby Company's pursuit to respond to our customers'

needs. The Kirby Micron Magic HEPA Filtration System demonstrates the quality you expect

and the performance you deserve.

Reorder genuine Kirby Micron Magic HEPA filter bags with MicroAllergen Technology from

your local authorized Kirby Distributor.

The Carpet and Rug Institute (CRI) has

awarded the Kirby home care system

its "Green Label" seal of approval for

meeting the organization's requirements

for soil removal, dust containment and

appearance retention.

For those who appreciate Quality, Reliability and Performance

Getting Started

PART ONE

This section outlines general information you will need as

you begin using your new Sentria™ system. It includes infor-

mation on:

Moving and Carrying Your System

Using the Handle Tilt Latch Lock

The Toe-Touch Control

Proper Power Nozzle Height

Using Tech Drive® Power Assist

Installing/Changing Disposable Filter Bags

Emptying the Mini Em-Tor® Collector

Understanding the Belt Lifter

Please read this section (as well as all other sections) carefully

before using your new Sentria home care system.

Getting Started

MOVING YOUR SYSTEM

Your Sentria system is equipped with Tech Drive® power

assist. In order to push your unit with the motor OFF, the

Tech Drive Pedal (11) must be turned OFF (disengaged).

Turn Tech Drive power assist OFF by pushing down on the

gray "N" side (marked "N" for Neutral) of the Tech Drive N/

D Pedal. (See page 8 for additional information.)

CARRYING YOUR SYSTEM

NOTE: The Carrying Grip (18) is designed for convenience in

carrying your Sentria system. •

HANDLE TILT LATCH LOCK

The Handle Tilt Latch Lock (10) serves two purposes:

To allow you to lift the front of the Sentria system over

door thresholds or throw rugs. To do so, move the Tilt

Latch Lock towards the bag. By doing this, the handle

will only lower part way. This allows you to push down on the

locked handle and lift the front of the unit. >

To allow you to store your Sentria system in a

vertical position or carry it.

To do this, lower the handle to a horizontal position near the

floor. While pushing the handle down, move the Tilt Latch

Lock away from the bag to lock the handle down. You can

now stand the unit up onto its bumper and lean it against a

wall for storage.

This vertical position may also be useful in carrying the unit.

To lift the unit, use the Carrying Grip (18). •

TOE-TOUCH CONTROL

The Toe-Touch Control (8), (9), located over the front

wheel, raises and lowers the front of your Sentria system.

Step down on the Toe-Touch Control Bottom Pedal (9) to raise

the front. •

/!\ CAUTION: Never unlock the Handle Tilt Latch without holding on to the handle. The

handle is spring-loaded and could quickly pivot upward when unlatched.

Getting Started

POWER NOZZLE HEIGHT ADJUSTMENT

When using the Power Nozzle (25), it is important to adjust

the height properly. Start by pressing the Toe-Touch Control

Bottom Pedal (9) all the way down, raising the front of your

system all the way up.

The Toe-Touch Control adjusts the Power Nozzle to seven

different heights. The highest four positions are used for attach-

ing accessories. Positions #1-3 are used for carpet and floor

cleaning. Positions #1-3 are indicated when the number shows

directly in front of the Toe-Touch Control Upper Pedal (8).

Turn the unit on and press the Toe-Touch Control upper

pedal 4 times (one notch at a time) until you see the #3 in

front of the Toe-Touch Control Upper Pedal. You are now at

the HIGHEST floor cleaning position used for high-pile and

plush carpets.

Press one more notch down for the MEDIUM position

(until you see the #2 in front of the Toe-Touch Control Upper

Pedal.) This is the most widely used position for all-type

carpets. Push one more notch down for LOW (until you see

the #1 in front of the Toe-Touch Control upper pedal). This is

the lowest position for low pile carpet and hard floor cleaning.

NOTE: When finished vacuuming, press the Toe-Touch

Control Bottom Pedal all the way down to move your

Sentria system. •

TECH DRIVE® POWER ASSIST

Your new Sentria system is equipped with Tech Drive power

assist. This innovative feature eliminates most of the effort

required to move your Sentria system back and forth. •

TURNING TECH DRIVE POWER ASSIST

ON (DRIVE)

To engage Tech Drive power assist push down the red "D"

side (marked "D" for Drive) of the Tech Drive N/D Pedal (12)

located just below the Power Switch. (13)

You may use your Sentria system without Tech Drive power

assist if desired. Simply put the Tech Drive pedal in Neutral. •

/!\ IMPORTANT: To avoid possible damage to soft tiles or marking of waxed and

finished non-carpeted floors, disengage the Tech Drive pedal.

Getting Started

TURNING TECH DRIVE POWER ASSIST

OFF (NEUTRAL)

To move your Sentria™ system with the motor OFF or to

vacuum without power assist, Tech Drive power assist must

be put in Neutral.

To place Tech Drive power assist in Neutral, push down the

gray "N" side (marked "N" for Neutral) of the Tech Drive

N/D Pedal (11). •

INSTALLING/CHANGING DISPOSABLE

FILTER BAGS

A Disposable Filter Bag must be installed before you begin

vacuuming.

To install a new Disposable Filter Bag, unzip the Outer

Permanent Bag (1) and pull out the Disposable Filter

Bag along with the Top Adaptor (5). > 1

2 When necessary, remove the used Disposable Filter Bag.

NOTE: Always replace the Disposable Filter Bag

when dirt reaches the "FULL" line on the bag. Failure

to do so will affect performance.

From the rear of the Disposable Bag, grasp the cardboard

faceplate. Holding the Top Adaptor steady, rotate the cardboard

faceplate to the left (counter-clockwise). When the lock tabs on

the Top Adaptor align with the slots in the cardboard faceplate,

gently pull the bag off. >

To install a new Disposable Filter Bag, grasp the card-

board faceplate from the rear of the Disposable Filter

bag. Align the slots in the cardboard faceplate on the

Disposable Filter Bag with the lock tabs on the Top Adaptor.

Then push the Top Adaptor into the bag opening.

Holding the Top Adaptor steady, rotate the cardboard faceplate

to the right (clockwise) to secure the Disposable Filter Bag.

NOTE: To avoid air leaks, make sure the cardboard faceplate

is securely positioned up against the flat portion of the Top

Adaptor. >

/!\ CAUTION: Before changing the Disposable Filter Bag, unplug the power cord

from the wall outlet and be sure that the motor and fan have stopped.

Getting Started

BAG SUPPORT STRAP

4 Check to make sure the Bag Support Strap (4)is con-

nected to the Top Adaptor (5). The Bag Support Strap

provides the support required for proper operation of

the Disposable Filter Bag.

If it is not connected, thread the strap through the small hole

of the Top Adaptor. Then place the hole in the strap over the

stud on the Top Adaptor.

Finally, insert the adaptor and new filter bag into the Outer

Permanent Bag (1)and close the zipper completely for

maximum performance.

NOTE: In order for the Filtration System to perform effectively,

use only Kirby® Micron Magic® HEPA Filtration Bags. If the

outside bag is torn or damaged, please replace immediately. •

EMPTYING THE MINI EM-TOR® COLLECTOR

The Mini Em-Tor (6) collector is designed to collect large,

heavy particles which can be emptied by removing the Mini

Em-Tor collector.

To remove, grasp the Mini Em-Tor collector in the

handhold provided and rotate it away from the body of

the system as far as it will go, then lift it off.

The top of the bag is released from the handle by pressing the

Bag Release Button (16). After removing the Mini Em-Tor col-

lector and the entire Bag Assembly, position the front opening

of the Mini Em-Tor collector over a newspaper and shake it to

remove the particles. >

To replace the Mini Em-Tor collector, re-attach the entire

Bag Assembly by inserting the Bag Latch Tab (2)at the top

of the bag into the slot under the Bag Release Button (16).

Finally, line up the raised indicator arrow of the Mini Em-Tor

collector with the indicator arrow on the Air Exhaust Port (19).

Rotate the Mini Em-Tor collector towards the Sentria system

and lock it in place.

NOTE: The Mini Em-Tor collector must be securely locked

in place or the unit will not operate. •

USING THE BELT LIFTER

The Belt Lifter (20) on your Sentria system is used for two

purposes:

1) To engage or disengage the Brush Roll. When the Brush Roll

is disengaged, the Sentria system can be used as a straight suc-

tion cleaner (page 15), and;

2) To allow removal of the Power Nozzle when converting

your Sentria system for use with various attachments and

optional accessories.

To avoid damaging the belt, turn the Sentria system OFF

before using the Belt Lifter. >

/!\ CAUTION: Do not pick up heavy objects, such as coins, screws, rocks or similar

objects. This may damage the fan.

Getting Started

USING THE BELT LIFTER (cont)

To use the Belt Lifter, you must first raise the Headlight

Hood (21). >

Flip out the handle on the Belt Lifter (20). Use it to turn

the Belt Lifter fully to the left (counter-clockwise) until

it stops and the red arrows line up. This stretches the

belt and lifts it off the motor shaft. Return the handle on the

Belt Lifter to its closed position.

If you are using your Sentria™ system as a straight suction

cleaner, simply lower the Headlight Hood. The Brush Roll is

now disengaged and will not rotate when the power switch is

turned ON. >

3 The belt will be stretched to the top of the nozzle as

shown. >

4 To re-engage the belt so the Brush Roll rotates, simply

raise the Headlight Hood and use the handle to turn the

Belt Lifter fully to the right (clockwise) until the green

arrows line up. Then lower the Headlight Hood.

The Brash Roll will now rotate when the Power Switch is

turned ON.

NOTE: The belt should not be stretched when stored for

an extended period. Make sure the green arrows line up

for storage. >

5 Your Sentria system is equipped with a Brush Roll

Performance Indicator Light (7), located on the top

right side of the Power Nozzle. The purpose of this

light is to show if the Brush Roll is rotating properly.

If the Brush Roll Indicator Light flashes intermittently or

does not come on when using the Power Nozzle, the Brush

Roll Belt may not be working properly. Either the Belt is not

engaged or may need to be replaced.

To replace the Brush Roll Belt, also called the Power Nozzle

Belt, see Page 55. •

Upright & Portable Cleaner

PART TWO

Your Sentria™ home care system is extremely versatile.

In this section, we will discuss the following:

Upright Cord Management

Using your Sentria System as an

Upright Cleaner

Using your Upright as a Straight

Suction Cleaner

Cleaning Hard-Surface Floors

Using your Sentria System as a

Portable Cleaner

Cleaning Mattresses and Carpeted Stairs

Upright & Portable Cleaner

UPRIGHT CORD MANAGEMENT

The Sentria system Upright handle incorporates a series of

hooks and fasteners to keep the cord off the floor and attached

to the upright handle for your convenience.

When using your Sentria system as an upright, snap

the power cord into the two cord holders located on the

back of the handle. >

With the Upper Cord Hook in the up or 12 o'clock

position, route the cord toward the rear of the unit and

slide the cord in to the c-shaped holder on the Upper

Cord Hook. The cord can now be wrapped around the Upper

and Lower Cord Hooks for storage. To quick-release the

cord for use, rotate the Upper Cord Hook down to the 6

o'clock position. The c-shaped holder is designed to hold the

cord securely in place and prevent the first loop from drop-

ping to the floor.

NOTE: The cord can only be inserted or removed from the

c-shaped holder when the Upper Cord Hook is in the 12

o'clock position. •

Upright & Portable Cleaner

THE UPRIGHT CLEANER

Before you begin vacuuming, it's important to have the Power

Nozzle (25) adjusted to the proper height setting. This gives you

the most efficient cleaning action. Lowering the Power Nozzle

too far prevents proper cleaning and shortens belt life.

The proper height setting can be achieved by doing

the following: >

Before you turn the Sentria™ system ON, raise the

Power Nozzle by stepping on the Toe Touch Control

Bottom Pedal (9) all the way down. >

2 Turn the Sentria system ON by pressing the Power

Switch (13). >

Press the Toe-Touch Control Upper Pedal 4 times.

You are now at the HIGHEST floor cleaning position

(indicated by the #3 showing in front of the Toe-Touch

Control Upper Pedal). Press the pedal again for medium

carpets (indicated by the #2) and again for low pile carpets

(indicated by the #1.) >

Upright & Portable Cleaner

4 If desired, engage Tech Drive® power assist by

pushing down the red "D" side (marked "D" for Drive)

of the Tech Drive N/D Pedal (12) located just below the

Power Switch (13). >

5 To turn your Sentria™ system OFF, press the Toe-

Touch Control Bottom Pedal (9) all the way down until

nozzle is fully raised.

Disengage Tech Drive power assist by stepping on the gray

"N" side (marked "N" for Neutral) of the Tech Drive N/D

Pedal (11).

Turn the Sentria system OFF by pressing the Power Switch

(13) and then unplugging. •

STRAIGHT SUCTION CLEANER

Straight Suction Cleaning allows you to vacuum hard floors,

throw rugs and delicate carpets without use of the Brush Roll.

NOTE: When using Straight Suction Cleaning without the Hard

Floor Pad, either on carpets or bare floors, lower the nozzle as

close as possible to the floor without touching the floor.

With the Sentria system turned OFF, raise the

Headlight Hood (21). >

Flip out the handle on the Belt Lifter (20). Use it to turn

the Belt Lifter all the way to the left (counter-clock-

wise) until the red arrows line up (see page 10). Return

the handle on the Belt Lifter to its closed position.

Then lower the Headlight Hood.

The Brush Roll is now disengaged and your Sentria system

will operate as a Straight Suction Cleaner. •

/!\ NOTICE:

Tech Drive pedal must be in neutral when using the cleaner on hard

surface floors.

Upright & Portable Cleaner

THE HARD FLOOR PAD (optional)

By attaching the optional Hard Floor Pad to your Sentria™,

system you may dust bare floors. While the unit is turned

OFF, raise the Power Nozzle (25) as far as it will go by press-

ing the Toe-Touch Control Bottom Pedal (9). Attach the

Hard Floor Pad onto the nozzle opening using the spring

clips on the plate. Then lower the Power Nozzle by pressing

the Toe-Touch Control Upper Pedal (8) one notch at a time

until the bristles touch the floor.

NOTE: The Hard Floor Pad should only be used when the

unit is in the Straight Suction Cleaner mode. •

PORTABLE CLEANER SET-UP

Besides being a remarkable Upright Cleaner, the Sentria sys-

tem can easily be converted into a portable cleaner for mat-

tresses and carpeted stairs.

To convert your Sentria system to a Portable Cleaner,

make sure the unit is turned OFF, unplugged, and the

Tech Drive® pedal is in neutral.

Then release the Outer Permanent Bag Top from the Bag

Support by pressing the Bag Release Button (16) and sliding

the bag top off. >

2 Remove the cord from the handle. With the Upright

Handle (17) in the vertical position, push the Handle

Release Button (14), located at the base of the handle,

and pull the handle straight up and out of the slot.

(Bag not shown for clarity.) >

3 Insert the Portable Handle (15) into the slot where the

Upright Handle was connected. Push the Portable

Handle into the slot until it snaps into place. >

/!\ CAUTION: Before installing the Hard Floor Pad, turn unit OFF, unplug the power cord

from the wall outlet and be sure the motor and nozzle brush have stopped.

Upright & Portable Cleaner

PORTABLE CLEANER SET-UP (cont)

Bend the Filtration Bag Assembly (1) in half and insert

the Bag Latch Tab (2) into the slot on the Portable

Handle until it snaps into place.

You are now ready for portable power cleaning. •

NOTE: Do not use portable mode on upholstered furniture.

CARPETED STAIRS

Place your Sentria™ system on one of the carpeted steps, while

supporting the rear. Turn the unit on after it is in place and make

sure the Tech Drive® pedal is in the Neutral position.

Roll the cleaner back and forth so that the Brush Roll

agitates the carpeting and loosens the dirt. •

MATTRESS CLEANING

Cleaning mattress surfaces is done the same as carpeted

stairs, except that you need to disengage the Brush Roll. (If

your mattress has tufted buttons on the surface, the Brush

Roll could pull them loose.)

NOTE: Do not carry the portable unit with the motor on. Place

the unit on the surface you wish to clean and then turn the unit

on. Turn the unit off to move it to a new location.

For straight suction cleaning, raise the Headlight Hood (21)

and flip out the handle on the Belt Lifter (20). Use it to turn

the Belt Lifter all the way to the left (counter-clockwise)

until the red arrows line up. This will stop the Brush Roll

from turning.

Return the handle on the Belt Lifter to its closed position

and lower the Headlight Hood. Use the Toe-Touch Control

to adjust the Power Nozzle to its lowest setting. •

/!\ CAUTION: To reduce risk of injury in the portable mode, keep hair and loose clothing

away from the Sentria system while in operation.

Also make sure Tech Drive® pedal is in the neutral position when

vacuuming stairs and mattresses. In addition, the Brush Roll should

be disengaged when vacuuming mattresses.

Canister Cleaner & Attachments

PART THREE

Your Kirby® Sentria™ system comes with a wide variety

of attachments for added versatility. In this section, we will

discuss the following:

Removing the Power Nozzle to Convert

to a Canister Cleaner

Using the Attachments

Using the Suction Control Grip

Using as a Blower Unit

Using the Portable Sprayer and the

Portable Shampooer

Canister Cleaner & Attachments

CONVERTING TO A CANISTER CLEANER/

INSTALLING THE ATTACHMENT HOSE

When using different cleaning attachments, the Attachment

Hose is connected to the front of the cleaner in place of the

Power Nozzle (25).

NOTE: When connecting the Attachment Hose, you may

choose between the Upright Handle (17) or the Portable

Handle (15). To install the Portable Handle, see page 16.

To install the Attachment Hose, you must first convert

to a Canister by removing the Power Nozzle. To do so,

press the Toe-Touch Control Bottom Pedal (9) all the

way down until nozzle is fully raised. Disengage Tech Drive®

power assist by stepping on the gray "N" side (marked "N" for

Neutral) of the Tech Drive N/D Pedal (11). Turn the Sentria™

system OFF by pressing the Power Switch (13) and then

unplugging. >

Raise the Headlight Hood (21) and flip out the handle

on the Belt Lifter (20). Use it to turn the Belt Lifter all

the way to the left (counter-clockwise) until the red -

arrows line up.

Unlock the Power Nozzle by turning the Accessory Lock

(22) all the way to the left (counter-clockwise). The Power

Nozzle should tip forward when it is released. Lift the

nozzle away from the Sentria system. >

At the connector end of the Attachment Hose, you will

notice two hooks. Place the hooks over the ends of the

Attaching Bar (24), then push the opening of the hose

up against the Sentria system. >

Lock the Attachment Hose Connector in place by

turning the Accessory Lock (22) all the way to the

right (clockwise). (Accessory Lock will clamp the

Attachment Hose to the unit.)

With the Attachment Hose in place, the unit will

automatically adjust to high speed for hose operation.

NOTE: If the Sentria system will not run when the Power

Switch is ON, see page 59. •

/!\ CAUTION: In normal operation, friction between the belt and the metal motor

shaft may cause the metal motor shaft to become hot to the touch.

Canister Cleaner & Attachments

INSTALLING ATTACHMENTS ON THE

ATTACHMENT HOSE

To attach tools to the hose, push lightly while twisting the

smaller end of the hose into the tool. •

EXTENSION TUBES

One or two Extension Tubes can be attached to the end of

the hose to extend your reach and efficiently use various

attachments. •

SURFACE NOZZLE

UNDER LOW FURNITURE/BARE FLOORS

The Surface Nozzle should be used on bare floors or for

surface cleaning carpets and under low furniture.

Rubber wheels on the nozzle allow it to glide silently on the

surface of hard floors without scratching and vacuum with

maximum power. •

DUSTER BRUSH

The Duster Brush may be connected to the Attachment

Hose or the Extension Tubes to remove dust from any

surface, including contoured or irregular surfaces. •

Canister Cleaner & Attachments

UPHOLSTERY NOZZLE

The Upholstery Nozzle is used for cleaning upholstered

furniture, carpeted steps, and clothing. It can also be used

to clean the inside of cars. •

CREVICE TOOL WITH REMOVABLE BRUSH

Without the removable brush, the Crevice Tool can be used

for cleaning cracks, crevices, corners, grooves and narrow

openings.

Install the removable brush in the end of the Crevice Tool to

remove dirt from corners, button tufts, between radiator coils

and sliding window tracks. •

WALL & CEILING BRUSH

To vacuum walls, ceilings, drapes and other surfaces,

attach the Wall & Ceiling Brush to the Suction Control

Grip. Then attach the Suction Control Grip to the Extension

Tube(s) as shown. In addition to providing suction relief, the

Suction Control Grip provides the proper angle to comfort-

ably vacuum walls and ceilings.

Tip: To vacuum the top of door frames or ledges, or books

on a bookshelf, rotate the Wall & Ceiling Brush 180°. •

Canister Cleaner & Attachments

MASSAGE CUP

Used with the Attachment Hose, the Massage Cup provides

an invigorating skin or scalp massage. It can also be used to

clean the floors of cars. •

CONTROLLING AIRFLOW WITH THE

SUCTION CONTROL GRIP

Sometimes when using the attachments, vacuuming drapes or

delicate lamp shades, for example, you might wish to control

the amount of suction.

The Suction Control Grip features a valve to control the

amount of suction. Slide the control back and forth until the

desired level of suction is reached.

The Suction Control Grip can be used with or without the

Extension Tubes. •

SUCTION CONTROL GRIP PLACEMENT

The Suction Control Grip may be used at the end of the

Extension Tubes for reaching up or at the beginning of the

Extension Tubes for reaching down. •

/!\ CAUTION: To avoid irritation or damage to eyes or ears, keep the massage cup

and all other accessories a safe distance away.

Canister Cleaner & Attachments

BLOWER SET-UP

Your Sentria system can also be used as a blower. To do so,

you must first remove the Power Nozzle (25).

NOTE: When using your Sentria system as a blower, you

may choose between the Upright Handle (17) or the Portable

Handle (15).

Turn the power OFF, place the Tech Drive® power

assist in Neutral (see page 8 for details), unplug

the unit from the wall outlet and press the Toe-Touch

Control Bottom Pedal (9) all the way down until noz-

zle is fully raised. >

2 Raise the Headlight Hood (21) and flip out the handle

on the Belt Lifter (20). Use it to turn the Belt Lifter all

the way to the left (counter-clockwise) until the red

arrows line up. >

3 Unlock the Power Nozzle (25) by turning the Accessory

Lock (22) all the way to the left (counter-clockwise). The

Power Nozzle should tip forward when it is released.

Lift nozzle away from the Sentria system. >

4 When using the blower attachments, the Air Intake

Guard must be attached to the front of the unit.

Fasten the Air Intake Guard onto the Attaching Bar (24)

the same way you would the Attachment Hose. Then lock it

on by turning the Accessory Lock (22) all the way to the right

(clockwise). >

Canister Cleaner & Attachments

BLOWER SET-UP (cont)

5 To remove the entire Bag Assembly, grasp the Mini

Em-Tor® collector (6) in the hand-hold provided and

rotate it out and away from the Sentria system as far as

it will go. Then lift it off.

Release the Outer Permanent Bag Top from the Bag Support

by pressing the Bag Release Button (16) and sliding the bag

top down. >

6 Place the large end of the Attachment Hose over the

Air Exhaust Port (19). Line up the Indicator Arrow

on the Hose End with the Indicator Arrow on the Air

Exhaust Port and twist the Hose Connector to the right

(clockwise) to lock it in place.

If the Sentria system will not operate, see page 59. •

USING AS A BLOWER

Your Sentria system may now be used as a blower.

By attaching the Inflator/Deflator Tool to the Attachment

Hose, you can inflate toys, air mattresses or any other

low-pressure inflatable item up to 1 p.s.i. (pounds per

square inch of air pressure). >

To deflate items, connect the Attachment Hose to the front

of the unit and connect the Inflator/Deflator Tool to the

Attachment Hose. Then connect the Bag Assembly to the

Air Exhaust Port.

You may now use your Sentria system to deflate items.

NOTE: You can also use this set-up to clean tight areas such

as computer keyboards and audio/video equipment. •

Canister Cleaner & Attachments

THE PORTABLE SPRAYER

The Portable Sprayer is used only in the Blower Mode.

It is an excellent tool to apply many different types of

water-based liquids to any type of surface. The spray can

be adjusted ranging from very fine to coarse.

PORTABLE SPRAYER SET-UP

Unscrew the jar from the Portable Sprayer and fill 3/4

full with non-flammable liquid. Before reinstalling the

jar, make sure the portable sprayer dip tube is attached

to the spray gun body. >

2 Screw the jar tightly on the Portable Sprayer and attach

the Portable Sprayer to the end of the Attachment Hose

in the Blower Mode.

Make certain your Sentria™ system is set up as a Blower

Unit. The Attachment Hose should be connected to the Air

Exhaust Port (19). •

USING THE PORTABLE SPRAYER

/!\ WARNING: Never use oil or solvent based paint of any kind in the Portable Sprayer. The

motor is open to the spray and could ignite flammable and volatile solvents.

Holding the Portable Sprayer horizontally, aim it

toward a sheet of newspaper. Turn the Sentria system

ON and squeeze the Portable Sprayer trigger, spraying

your non-flammable solution onto the newspaper to

check spray pattern.

NOTE: If the Portable Sprayer must be tilted during usage,

less solution should be used in the jar. This will help avoid

large droplets in the spray. >

Canister Cleaner & Attachments

USING THE PORTABLE SPRAYER (cont)

2 With the nozzle pointed away from you, adjust the

spray by turning the Spray Adjustment Control on

the trigger of the Portable Sprayer. >

3 Use slow, sweeping motions to spray the desired

area with solution. Always squeeze the trigger fully

to permit maximum flow. This will give you the best

spray control. •

CLEANING THE PORTABLE SPRAYER

Immediately after use, empty the Portable Sprayer jar

and wash with warm soapy water. >

2 The Portable Sprayer dip tube should also be removed

and washed. (Make sure to reinstall it after cleaning.) >

/!\ WARNING: Never clean the Portable Sprayer with flammable cleaning fluids.

The motor is open to the spray and could ignite the spray.

Canister Cleaner & Attachments

CLEANING THE PORTABLE SPRAYER (cont)

3 The spray opening on the front of the Sprayer also

pulls out so that the inside of the Sprayer and the

nozzle jet can be cleaned.

To remove the nozzle jet, press on the two latches on the

front of the nozzle jet and pull it out. (The latches must

be aligned with the holes on the front of the Sprayer when

returning the nozzle jet to the front of the Sprayer.)

Then, fill the jar with water. Spray water until the spray

becomes clear. Reassemble the Sprayer after cleaning so

none of the parts will be lost. •

PORTABLE SHAMPOOER SET-UP

The Portable Shampooer is used in the Blower Mode only.

It is designed for fast and easy cleaning of carpeted stairways

and areas that are difficult to reach with the Carpet Shampoo

System.

To set up the Portable Shampooer, attach the Portable

Shampooer cap to the end of the Portable Sprayer. >

Remove the jar from the Portable Sprayer and fill

the jar about 3/4 full with Kirby® Carpet Shampoo

mixture (Mix according to the instructions on the

bottle.) USE ONLY KIRBY CARPET SHAMPOO for

best results. >

3 Screw the jar tightly on the Portable Sprayer, then

attach the Sprayer to the Attachment Hose.

(Make certain your Sentria™ system is set up as a

Blower Unit. The Attachment Hose should be connected

to the side Air Exhaust Port (19). •

Canister Cleaner & Attachments

USING THE PORTABLE SHAMPOOER

Before shampooing, vacuum surface thoroughly.

To make suds, turn the Sentria™ system ON and pull

the trigger of the Portable Sprayer. A stream of suds

will come out of the cap.

The suds can be sprayed directly onto the surface being

cleaned or on a plain paper bag or in a bowl and then applied

to the surface being cleaned. >

2 Adjust the Portable Sprayer for proper suds volume by

turning the Spray Adjustment Control located on the

trigger. >

3 Work suds into the surface with a soft clean, white

brush or sponge until they disappear. Allow the surface

to dry completely.

Then vacuum with the appropriate cleaning tool. This

will remove the dry residue which contains grime and

loosened dirt. •

/!\ IMPORTANT: The Portable Shampooer is not recommended for use on upholstery

or fabrics such as silk, brocade and velvet. If in doubt, try a test patch.

Let the test patch dry and then check it before you shampoo further.

Optional Accessories

PART FOUR

Optional Kirby® Accessories greatly enhance the usefulness

of your new Sentria™ system. In this section, we will discuss

the following:

Using the Carpet Shampoo System

Using Kirby Guard Carpet &

Upholstery Protector

Using the Floor Care System

Using the Turbo Accessory System

Using the Zippbrush

Using the Handi-Butler® Tool

Optional Accessories

CARPET SHAMPOO SYSTEM SET-UP

Vacuum thoroughly before shampooing for maximum

cleaning. Then, remove the Outer Permanent Bag (1) and

the Power Nozzle (25) to prepare for shampooing.

By using the handle, turn the Carpet Shampoo System

Nozzle Belt Lifter to the right (clockwise) until the

green arrows line up. >

2 Slide the slots on the side of the Carpet Shampoo

System Nozzle over the outer shoulders of the Carpet

Shampoo System Tray. >

3 While pushing up on the belt with your finger, use

the handle on the Belt Lifter to turn it left (counter-

clockwise looking at it from the front) until the red

arrows line up. (The Belt Lifter Hook will catch and

stretch the belt.) >

4 Press the Toe-Touch Control Bottom Pedal (9) all

the way down to raise the front of the Sentria™

system. >

Optional Accessories

CARPET SHAMPOO SYSTEM SET-UP (cont)

5 While sliding the Carpet Shampoo System Nozzle/

Tray Assembly toward the Sentria™ system and over

the Motor Shaft (23), connect the hooks on the bottom

rear of the nozzle to the Attaching Bar (24). >

Push the nozzle up against the unit and turn the

Accessory Lock (22) to the right (clockwise) to lock

the nozzle in place. To engage the belt, use the handle

on the Belt Lifter to turn it all the way to the right

(clockwise) until the green arrows line up. Then lower

the Headlight Hood (21). >

7 The Shampoo Tank is removable and should be filled

or emptied at your sink.

NOTE: The Shampoo Tank is removed and re-attached

in the same way as the Mini Em-Tor® collector (see

page 10 for details).

Unscrew the large cup from the top of the Shampoo Tank

and turn the Suds Control Valve fully to the left (counter-

clockwise) to OFF.

Holding the Shampoo Tank level, fill it to the full line with

warm water (not hot).

Using the large cup from the top of the tank, pour three

cupfuls of Kirby® Carpet Shampoo into the Shampoo Tank.

Do not use more, as over-foaming will result.

NOTE: One tankful of solution will clean about a 10x12

foot carpet (3x3.5m). Larger carpets will require refilling the

Shampoo Tank.

Replace the large cup into the opening on top of the

Shampoo Tank. >

Optional Accessories

Taking care to avoid spilling liquid on the Sentria™

system or the floor, place the opening in the bottom

front of the Shampoo Tank over the Air Exhaust Port

(19) on the unit. Angle the Shampoo Tank outward from the

unit until the arrows line up. Next, slide the Shampoo Tank

down over the locking pins on the Air Exhaust Port.

Rotate the Shampoo Tank toward the unit (clockwise) to

lock it in place. >

9 Push the round elbow of the small flexible hose into

the hole in the tray until it snaps into place. Firmly

insert the other end over the fitting at the bottom front

of the Shampoo Tank. •

USING THE CARPET SHAMPOO SYSTEM

To set the nozzle to the proper height, step on the Toe-

Touch Control Upper Pedal (8) as often as necessary to

lower the nozzle to its lowest position. >

NOTE: Forcing the brushroll into the surface of the carpet

decreases its ability to thoroughly clean the carpet and could

damage the belt and brushroll.

2 Turn the Suds Control Valve all the way to the right

(clockwise) to the ON position. Turn the Sentria sys-

tem ON and engage Tech Drive® power assist (see

page 8 for details). Suds flow will begin immediately.

Control the amount of suds by turning the Suds Control

Valve left (counter-clockwise) for decreased suds flow

and right (clockwise) for increased suds flow. Turning the

valve all the way to the left (counter-clockwise) to the OFF

position will stop the flow of suds completely.

Stopping the flow of suds allows you to thoroughly brush all

the suds into the carpet before applying more suds. This also

lets you spot scrub badly soiled areas. >

CARPET SHAMPOO SYSTEM SET-UP (cont)

Optional Accessories

USING THE CARPET SHAMPOO SYSTEM (cont)

As you move the Sentria™ system back and forth, foam will

be released and the brush will work it into the carpet.

NOTE: Suds should be dispensed the full width of the

tray when the unit is pulled backward. If not, pull back

more slowly or check and clean the Shampoo Tank Filter,

if necessary (see page 35).

After suds have been on the carpet at least five minutes,

pick up the foam by turning the Shampoo Tank to the OFF

position. With the unit at its lowest height level, move the

Shampooer over the foam until the foam is picked up. Some

moisture will accumulate in the front of the tray. Once the

carpet is thoroughly dry, vacuum with the Kirby® Upright. •

CLEANING THE CARPET SHAMPOO

SYSTEM

Push the Toe-Touch Control Bottom Pedal (9) all the

way down to raise the nozzle and tray, then turn the

Sentria system OFF and unplug it. >

2 Turn the Suds Control Valve fully to the left

(counter-clockwise) to the OFF position.

Pull the Small Flexible Hose from the Shampoo

Tank. >

Raise the Headlight Hood (21). Release the belt by

turning the Belt Lifter to the left (counter-clockwise)

until the red arrows line up. >

Optional Accessories

CLEANING THE CARPET SHAMPOO

SYSTEM (cont)

4 Turn the Accessory Lock (22) to the left (counter-

clockwise). The Carpet Shampoo System Nozzle/Tray

Assembly will tip forward.

Lift the Nozzle/Tray Assembly off the Sentria™ system and

carry it to the sink. >

5 Remove the hose from the tray and rinse.

6 By using the handle, turn the Belt Lifter to the right

(clockwise) until the green arrows line up. Pull the tray

and nozzle apart. Rinse tray. >

7 To clean the brush, push the thumb pads located at

each end of the plastic shield and rotate the shield up

and away from the brush.

Disconnect the shield by gently pulling out the ends of the

tray just behind the Brush Roll.

Push the Brush Roll down out of the tray by simultaneously

pushing on both ends of the brush with both thumbs.

Rinse all areas of the shield tray and brush, and remove any

lint from brush tufts.

Shake excess water from the Brush Roll by brushing hand

over the bristles and then drying with a towel. >

Optional Accessories

CLEANING THE CARPET SHAMPOO

SYSTEM (cont)

8 To remove the Shampoo Tank from the Air Exhaust

Port (19), rotate it away from the Sentria™ system as

far as it will go, then lift it upwards. >

9 Remove and clean the Suds Screen Cap, Cup and

Sponge Filter.

Rinse out the Shampoo Tank with cold water and

replace the Screen Cap, Cup and Sponge Filter.

NOTE: The belt should not be stretched for extended periods.

Make sure the green arrows on the nozzle line up for storage.

(Remember to align the red arrows before replacing the nozzle

on the unit - see Belt Lifter section on page 10.) •

REPLACING A WORN CARPET SHAMPOO

SYSTEM NOZZLE BELT

To replace the Carpet Shampoo System Nozzle Belt,

push the thumb pads located at each end of the shield

and rotate the shield up and away from the brush. >

2 Push down carefully on the ends of the brush with

your thumbs. The brush will snap out and the belt

can be replaced.

Be certain the belt is placed in the center of the brush.

NOTE: Use only approved Kirby® belts. >

Optional Accessories

REPLACING A WORN CARPET SHAMPOO

SYSTEM NOZZLE BELT (cont)

3 Align the metal ends of the brush with the slots on the

tray and push the brush in until it snaps into place. The

brush will only fit the tray the correct way.

NOTE: The belt should not be stretched when stored for

an extended period. Make sure the green arrows line up

for storage. •

PROTECT YOUR CARPET AFTER

SHAMPOOING WITH KIRBY GUARD

CARPET & UPHOLSTERY PROTECTOR

Kirby Guard Carpet & Upholstery Protector offers superior

soil protection, giving carpets and upholstery a resiliency

to spills and stains. This helps to reduce maintenance and

allows for easy cleaning, helping carpets and upholstery

to stay cleaner, brighter and fresher longer. Kirby Guard is

CFC (chlorofluorocarbon) and solvent free.

TO USE:

Clean surface to be treated by vacuuming thoroughly

and (in the case of carpet) shampooing. Apply to clean

carpet, either damp or dry. >

Pour Kirby Guard into the jar for the Portable Sprayer.

Screw the jar tightly on the Portable Sprayer and attach

the Portable Sprayer to the end of the Attachment Hose

in the Blower Mode. (for additional information on using the

Portable Sprayer, refer to p. 25) >

3 Spray evenly with a 50% overlapping spray pattern. >

Test for color fastness. Using a clean white cloth, rub Kirby Guard on

a hidden part of carpet or upholstery. If fabric changes color or color

transfers to cloth, DO NOT USE.

/!\ IMPORTANT: Test for color fastness. Using a clean white cloth, rub Kirby Guard on

a hidden part of carpet or upholstery. If fabric changes color or color

transfers to cloth, DO NOT USE.

Test for color fastness. Using a clean white cloth, rub Kirby Guard on

a hidden part of carpet or upholstery. If fabric changes color or color

transfers to cloth, DO NOT USE.

Mist may be irritating to the lungs. Avoid breathing vapor or mist. Use

with adequate ventilation. If irritation occurs, move to fresh air. Call a

physician if irritation persists. See botde for a complete list of ingredients.

/!\ CAUTION: Mist may be irritating to the lungs. Avoid breathing vapor or mist. Use

with adequate ventilation. If irritation occurs, move to fresh air. Call a

physician if irritation persists. See botde for a complete list of ingredients.

Mist may be irritating to the lungs. Avoid breathing vapor or mist. Use

with adequate ventilation. If irritation occurs, move to fresh air. Call a

physician if irritation persists. See botde for a complete list of ingredients.

Optional Accessories

PROTECTING YOUR CARPET (cont)

4 If Kirby Guard has been sprayed onto any hard sur-

faces such as furniture, baseboards, tile, etc., wipe off

before drying occurs. Allow carpets to dry thoroughly

before resuming normal use. >

5 Thoroughly clean the Portable Sprayer after use. •

USING THE KIRBY MIRACLE WAXER®

FLOOR POLISHER

To assemble the roller waxer applicator, attach the top

half of the roller waxer handle to the bottom half (if not

already done). Adjust the upper half until the spring-

loaded pin in the lower half is seated in the hole near the

bottom of the upper half. >

KIRBY MIRACLE WAX DIRECTIONS

For Hardwood, Vinyl, Cork and Linoleum Floors:

1. Clean surface thoroughly.

2. Attach Kirby Floor Care System Buffer Nozzle and

Brush according to the instructions on page 39,

under "Floor Buffer Set-Up."

3. For best results, apply a very thin coat of Kirby

Miracle Wax using the roller applicator. It is not

necessary to completely cover the floor with wax at

this time, as the wax will be spread in the next step.

4. Using the Toe-Touch Control Upper Pedal to lower

the nozzle all the way down, spread the wax evenly

over the entire floor using the Kirby Floor Care

System Buffer Brush.

5. Let dry 5 minutes.

6. When dry, buff with the Kirby Floor Care System

Buffer Brush.

NOTE: For very worn areas, two coats may be

required. In this case, multiple thin coats will

provide better results than one thick coat.

For Marble Floors:

Apply a thin coat and spread as in the directions

in #4. However, buff immediately, avoiding any

drying time.

Once you have completed the steps above, the floor

may be rebuffed, any time it becomes necessary, using

the Floor Care System Buffer Brush. Apply addi-

tional wax ONLY when rebuffing does not produce

acceptable results.

IMPORTANT:

Do not use Kirby Miracle Wax on rubber

or asphalt tile. •

KIRBY MIRACLE WAX DIRECTIONS

For Hardwood, Vinyl, Cork and Linoleum Floors:

1. Clean surface thoroughly.

2. Attach Kirby Floor Care System Buffer Nozzle and

Brush according to the instructions on page 39,

under "Floor Buffer Set-Up."

3. For best results, apply a very thin coat of Kirby

Miracle Wax using the roller applicator. It is not

necessary to completely cover the floor with wax at

this time, as the wax will be spread in the next step.

4. Using the Toe-Touch Control Upper Pedal to lower

the nozzle all the way down, spread the wax evenly

over the entire floor using the Kirby Floor Care

System Buffer Brush.

5. Let dry 5 minutes.

6. When dry, buff with the Kirby Floor Care System

Buffer Brush.

NOTE: For very worn areas, two coats may be

required. In this case, multiple thin coats will

provide better results than one thick coat.

For Marble Floors:

Apply a thin coat and spread as in the directions

in #4. However, buff immediately, avoiding any

drying time.

Once you have completed the steps above, the floor

may be rebuffed, any time it becomes necessary, using

the Floor Care System Buffer Brush. Apply addi-

tional wax ONLY when rebuffing does not produce

acceptable results.

IMPORTANT:

Do not use Kirby Miracle Wax on rubber

or asphalt tile. •

KIRBY MIRACLE WAX DIRECTIONS

For Hardwood, Vinyl, Cork and Linoleum Floors:

1. Clean surface thoroughly.

2. Attach Kirby Floor Care System Buffer Nozzle and

Brush according to the instructions on page 39,

under "Floor Buffer Set-Up."

3. For best results, apply a very thin coat of Kirby

Miracle Wax using the roller applicator. It is not

necessary to completely cover the floor with wax at

this time, as the wax will be spread in the next step.

4. Using the Toe-Touch Control Upper Pedal to lower

the nozzle all the way down, spread the wax evenly

over the entire floor using the Kirby Floor Care

System Buffer Brush.

5. Let dry 5 minutes.

6. When dry, buff with the Kirby Floor Care System

Buffer Brush.

NOTE: For very worn areas, two coats may be

required. In this case, multiple thin coats will

provide better results than one thick coat.

For Marble Floors:

Apply a thin coat and spread as in the directions

in #4. However, buff immediately, avoiding any

drying time.

Once you have completed the steps above, the floor

may be rebuffed, any time it becomes necessary, using

the Floor Care System Buffer Brush. Apply addi-

tional wax ONLY when rebuffing does not produce

acceptable results.

IMPORTANT:

Do not use Kirby Miracle Wax on rubber

or asphalt tile. •

KIRBY MIRACLE WAX DIRECTIONS

For Hardwood, Vinyl, Cork and Linoleum Floors:

1. Clean surface thoroughly.

2. Attach Kirby Floor Care System Buffer Nozzle and

Brush according to the instructions on page 39,

under "Floor Buffer Set-Up."

3. For best results, apply a very thin coat of Kirby

Miracle Wax using the roller applicator. It is not

necessary to completely cover the floor with wax at

this time, as the wax will be spread in the next step.

4. Using the Toe-Touch Control Upper Pedal to lower

the nozzle all the way down, spread the wax evenly

over the entire floor using the Kirby Floor Care

System Buffer Brush.

5. Let dry 5 minutes.

6. When dry, buff with the Kirby Floor Care System

Buffer Brush.

NOTE: For very worn areas, two coats may be

required. In this case, multiple thin coats will

provide better results than one thick coat.

For Marble Floors:

Apply a thin coat and spread as in the directions

in #4. However, buff immediately, avoiding any

drying time.

Once you have completed the steps above, the floor

may be rebuffed, any time it becomes necessary, using

the Floor Care System Buffer Brush. Apply addi-

tional wax ONLY when rebuffing does not produce

acceptable results.

IMPORTANT:

Do not use Kirby Miracle Wax on rubber

or asphalt tile. •

KIRBY MIRACLE WAX DIRECTIONS

For Hardwood, Vinyl, Cork and Linoleum Floors:

1. Clean surface thoroughly.

2. Attach Kirby Floor Care System Buffer Nozzle and

Brush according to the instructions on page 39,

under "Floor Buffer Set-Up."

3. For best results, apply a very thin coat of Kirby

Miracle Wax using the roller applicator. It is not

necessary to completely cover the floor with wax at

this time, as the wax will be spread in the next step.

4. Using the Toe-Touch Control Upper Pedal to lower

the nozzle all the way down, spread the wax evenly

over the entire floor using the Kirby Floor Care

System Buffer Brush.

5. Let dry 5 minutes.

6. When dry, buff with the Kirby Floor Care System

Buffer Brush.

NOTE: For very worn areas, two coats may be

required. In this case, multiple thin coats will

provide better results than one thick coat.

For Marble Floors:

Apply a thin coat and spread as in the directions

in #4. However, buff immediately, avoiding any

drying time.

Once you have completed the steps above, the floor

may be rebuffed, any time it becomes necessary, using

the Floor Care System Buffer Brush. Apply addi-

tional wax ONLY when rebuffing does not produce

acceptable results.

IMPORTANT:

Do not use Kirby Miracle Wax on rubber

or asphalt tile. •

KIRBY MIRACLE WAX DIRECTIONS

For Hardwood, Vinyl, Cork and Linoleum Floors:

1. Clean surface thoroughly.

2. Attach Kirby Floor Care System Buffer Nozzle and

Brush according to the instructions on page 39,

under "Floor Buffer Set-Up."

3. For best results, apply a very thin coat of Kirby

Miracle Wax using the roller applicator. It is not

necessary to completely cover the floor with wax at

this time, as the wax will be spread in the next step.

4. Using the Toe-Touch Control Upper Pedal to lower

the nozzle all the way down, spread the wax evenly

over the entire floor using the Kirby Floor Care

System Buffer Brush.

5. Let dry 5 minutes.

6. When dry, buff with the Kirby Floor Care System

Buffer Brush.

NOTE: For very worn areas, two coats may be

required. In this case, multiple thin coats will

provide better results than one thick coat.

For Marble Floors:

Apply a thin coat and spread as in the directions

in #4. However, buff immediately, avoiding any

drying time.

Once you have completed the steps above, the floor

may be rebuffed, any time it becomes necessary, using

the Floor Care System Buffer Brush. Apply addi-

tional wax ONLY when rebuffing does not produce

acceptable results.

IMPORTANT:

Do not use Kirby Miracle Wax on rubber

or asphalt tile. •

Optional Accessories

USING THE MIRACLE WAXER®

FLOOR POLISHER (cont)

With the wax roller bag facing the hooked end of the

long roller handle, push the wax roller over the connector

on the bottom of the handle until secure. >

Pull the roller bag off the wax roller and save the packing

bag. Begin waxing according to the directions in box on

previous page. >

4 To remove the wax roller from the long handle, hold the

original wax roller packing bag with the open end facing

the roller. Push the wax roller into the packing bag as far

as it will go. Avoid touching the wax with your hand. >

Grasp both the packing bag and roller firmly and pull

mem off the long roller waxer handle. To do this, push

the roller away from the handle grip toward the bar to

compress the retaining spring. This will allow you to

slide the roller over the end cap. Seal bag tightly to prevent pre-

mature drying. Store in the provided packing tube and put in a

safe place away from children and pets until next use. >

6 If desired, prepare the long waxer roller handle for stor-

age by depressing the spring-loaded pin on the lower

portion of the handle while pushing the upper portion

toward the hooked end.

IMPORTANT: Seal used roller in original packing bag and

tube after each use to prevent the wax from drying out. •

Optional Accessories

FLOOR BUFFER SET-UP

Your Sentria™ system can be used as an effective floor buf-

fer for wood or tile floors.

To use the Floor Buffer, you must first insert the Buffer

Brush into the Floor Buffer Nozzle.

Center the belt of the Buffer Brush in the middle area

between the tufts of the brush. >

2 Turn the Buffer Nozzle over and slide the ends of the

Brush into the slots at each end of the nozzle. The

Buffer Brush will only fit the correct way. >

3 Push the belt up against the Brush Roll with your finger. >

While holding the belt in place, use the handle on the

Belt Lifter to turn it left (counter-clockwise) until the

red arrows line up. The Belt Lifter hook will catch the

belt and stretch it upward into the nozzle. >

To avoid loss of control, do not stand unit on end for polishing. The

Tech Drive pedal must be in the neutral position during polishing

/!\ CAUTION: To avoid loss of control, do not stand unit on end for polishing. The

Tech Drive pedal must be in the neutral position during polishing

To avoid loss of control, do not stand unit on end for polishing. The

Tech Drive pedal must be in the neutral position during polishing

Optional Accessories

FLOOR BUFFER SET-UP (cont)

Place the hooks located on the rear of the nozzle over

the Attaching Bar (24) and push the nozzle up against

the Sentria™ system.

Turn the Accessory Lock (22) all the way to the right

(clockwise) to lock the nozzle in place. >

6 To engage the drive belt and Buffer Brush, use the

handle to turn the Belt Lifter all the way to the right

(clockwise) until the green arrows line up. Lower the

Headlight Hood (21).>

7 DO NOT USE Tech Drive® power assist with the

Floor Buffer.

Place Tech Drive power assist in Neutral by stepping on

the gray "N" side ("N" for Neutral) of the Tech Drive N/D

Pedal (11). >

Because the unit moves forward when the Floor Buffer

Brush touches the floor, make sure the Buffer Nozzle

is on its highest setting. Press the Toe-Touch Control

Bottom Pedal (9) all the way down to raise the Buffer

Nozzle all the way up.

While holding onto the unit's handle, turn the Sentria

system ON. >

To avoid losing control of the Buffer when brush is on the floor surface,

hold on to the handle before plugging the power cord into the wall outlet

and before turning the power switch ON. To avoid possible damage to

soft tiles or marking of waxed and finished non-carpeted floors,

disengage the Tech Drive power assist pedal.

/!\ CAUTION: To avoid losing control of the Buffer when brush is on the floor surface,

hold on to the handle before plugging the power cord into the wall outlet

and before turning the power switch ON. To avoid possible damage to

soft tiles or marking of waxed and finished non-carpeted floors,

disengage the Tech Drive power assist pedal.

To avoid losing control of the Buffer when brush is on the floor surface,

hold on to the handle before plugging the power cord into the wall outlet

and before turning the power switch ON. To avoid possible damage to

soft tiles or marking of waxed and finished non-carpeted floors,

disengage the Tech Drive power assist pedal.

USING THE FLOOR BUFFER

Optional Accessories

USING THE FLOOR BUFFER (cont)

9 Press the Toe-Touch Control Upper Pedal (8) to lower

the brush one notch at a time. Lower the brush as far

as the Toe-Touch Control will allow.

With the Buffer running, move the Sentria™ system over

the floor as though you were cleaning a carpet, using slow,

steady strokes.

NOTE: The belt should not be stretched when stored for

an extended period. Make sure the green arrows line up

for storage. •

HARD FLOOR PAD

See page 16 for set-up and use of the Hard Floor Pad. •

Your Kirby® Floor Buffer can also be used as a Carpet

Fluffer to reset the nap on a matted-down carpet.

Before fluffing the carpet, raise the nozzle all the way

up by pushing the Toe-Touch Control Bottom Pedal (9)

all the way down.

Place the cleaner on the carpet to be fluffed. >

2 Plug in the Power Cord. Disengage the Tech Drive®

power assist by pressing on the gray "N" side of the

Tech Drive N/D Pedal (11).

Holding onto the handle firmly, start the cleaner by pressing

the ON switch. >

USING THE CARPET FLUFFER

Optional Accessories

USING THE CARPET FLUFFER (cont)

3 Lower the Carpet Fluffer Nozzle one notch at a time

by pushing the Toe-Touch Control Upper Pedal

(8). The instant the brush contacts the carpet, stop

lowering the brush. >

4 Then engage Tech Drive® power assist by pressing

down on the red "D" side of the "N/D" Pedal. You are

now ready to fluff the carpet by pushing the cleaner

back and forth over the carpet.

NOTE: • Lowering the brush too far on cable yarn type

carpets may cause the carpet to fuzz. Do not fluff

delicate carpets.

• The belt should not be stretched when stored for an

extended period. Make sure the green arrows line

up for storage. •

TURBO ACCESSORY SET-UP

The Turbo Accessory System can be used for a wide variety

of household jobs. It's a sander, a buffing unit, a scouring

unit and a massage unit.

TURBO-SANDING

To set up the Turbo Accessory System as a sander,

unsnap the Sander Dust Shroud at the rear of the tool

and lift off. >

2 Rotate the clamp levers on the side of the Turbo

Accessory upwards to open the clamps. >

Be sure no metal objects, such as tacks, nails, etc., are sticking up from

the surface. They can damage the sandpaper and the Turbo Accessory.

They may also cause sparks, which could ignite dust. Replace the

disposable bag after extended sanding because the dust is fine and will

plug the bag pores.

/!\ CAUTION: Be sure no metal objects, such as tacks, nails, etc., are sticking up from

the surface. They can damage the sandpaper and the Turbo Accessory.

They may also cause sparks, which could ignite dust. Replace the

disposable bag after extended sanding because the dust is fine and will

plug the bag pores.

Be sure no metal objects, such as tacks, nails, etc., are sticking up from

the surface. They can damage the sandpaper and the Turbo Accessory.

They may also cause sparks, which could ignite dust. Replace the

disposable bag after extended sanding because the dust is fine and will

plug the bag pores.

Optional Accessories

Select the correct grade of sandpaper needed for the

job. Use fine paper for a smooth finish and coarse

paper to clear rough surfaces or remove paint.

Slide the sheet into the front clamp and lock the clamp lever.

NOTE: Three grades of sandpaper come with the Sander.

Each piece is a standard 1/3 sheet. >

4 Tightly wrap the paper around the bottom of the Turbo

Accessory and tuck the end into the rear clamp. Lock

the rear clamp. >

5 With the Turbo Accessory on a level surface, wrap

the Sander Dust Shroud around the Sander with the

opening to the rear and snap it closed. >

Insert the Attachment Hose into the end of the Turbo

Accessory.

Grip the Sander at the front and rear and turn the

Sentria™ system ON. Then press the ON button on the

top of the Sander.

While applying light pressure, move it over the surface slowly.

Allow the Sander to do the work. Don't force it or lean heavily

on it. The tool works best at high speed. •

Always wear safety glasses when turbo sanding.

/!\ CAUTION: Always wear safety glasses when turbo sanding. Always wear safety glasses when turbo sanding.

TURBO-SANDING SET-UP (cont)

Optional Accessories

TURBO POLISHING

Attach the synthetic lamb's wool pad using the same

procedure as attaching sandpaper (see page 42). The Turbo

Accessory now becomes a polisher. Use it for polishing hard

waxed surfaces, such as table tops, paneling, and large flat

surfaces. It can be used to polish cars.

The Dust Shroud is not used when polishing. •

TURBO SCOURING

Attach the webbed nylon scouring pad using the same

procedure as attaching sandpaper (see page 42). The Turbo

Accessory now becomes a scouring tool. Use it for scour-

ing hard surfaces such as ceramic tile, etc. (Do not use on

painted surfaces.)

The Dust Shroud is not used when using the scouring pad. •

ORBITAL MASSAGE UNIT

The Turbo Accessory Massage Unit is intended for use where

massage is desired or medically recommended.

To use as an Orbital Massage Unit, attach the soft vinyl pad

to the Turbo Accessory using the same procedure as attaching

sandpaper (see page 42).

The Suction Control Grip can be used to decrease the vibration

of the Massager. Thus, a variable speed Massager. The Suction

Control Grip also enables a person to massage their own back.

The Dust Shroud is not used when using the Turbo Accessory

as a massage unit. •

Do not use the Orbital Massager on swollen or inflamed areas, legs with

varicose veins, areas where there are skin eruptions, unexplained calf pains

or anesthetic skin areas unless first approved by your doctor. Children must

be supervised when using the massager.

/!\ CAUTION: Do not use the Orbital Massager on swollen or inflamed areas, legs with

varicose veins, areas where there are skin eruptions, unexplained calf pains

or anesthetic skin areas unless first approved by your doctor. Children must

be supervised when using the massager.

Do not use the Orbital Massager on swollen or inflamed areas, legs with

varicose veins, areas where there are skin eruptions, unexplained calf pains

or anesthetic skin areas unless first approved by your doctor. Children must

be supervised when using the massager.

Optional Accessories

USING THE ZIPPBRUSH

When attached to the Attachment Hose, the Zippbrush can

be used for a wide variety of cleaning surfaces, includ-

ing upholstery, and carpeted steps. It can be used to clean

automotive interiors.

For optimum results, do not press down heavily on the

Zippbrush. Allow the brush to rotate at maximum speed by

gently moving it side to side on the surface being cleaned.

CLEANING THE ZIPPBRUSH

To clean the Zippbrush, press the button on the front

of the brush to release the outer brush ring.

When pressing the release button, avoid placing

pressure on the outer ring brush. >

2 Lift the center Brush/Air Turbine out of the tool and

remove any particles or lint from the brush and turbine.

Also remove any particles left in the tool cavity. >

Place the Brush/Air Turbine back in the tool and turn

it until the tabs drop into the slots. Hook the tab on the

rear of the brush ring into the small opening of the tool

and snap it back into place. •

While using the Zippbrush, do not insert fingers into the revolving brush

area or push the release button while the brush is in motion. Keep brush

flat against the surface being cleaned as the brush can throw particles

outward. Do not use on delicate fabrics.

/!\ CAUTION: While using the Zippbrush, do not insert fingers into the revolving brush

area or push the release button while the brush is in motion. Keep brush

flat against the surface being cleaned as the brush can throw particles

outward. Do not use on delicate fabrics.

While using the Zippbrush, do not insert fingers into the revolving brush

area or push the release button while the brush is in motion. Keep brush

flat against the surface being cleaned as the brush can throw particles

outward. Do not use on delicate fabrics.

Optional Accessories

Handi-Butler® Tool

Important Safety Instructions

The Handi-Butler Model #298906 or #298806 is for use only with the Sentria™ (G10 series)

system. Use only as described in this manual.

Before using this accessory, read and follow the "Important Safety Instructions" and "Warnings"

in the Sentria vacuum cleaner Owner's Manual in addition to the warnings noted below.

WARNING

BE FAMILIAR WITH ALL THE IMPORTANT

SAFETY INSTRUCTIONS BEFORE USING YOUR HAND-BUTLER

TOOL. Failure to follow all instructions listed below may result in electric

shock, fire and/or serious injury.

SAVE THESE INSTRUCTIONS

General Safety Rules:

Work Area:

• Keep work area clean and well lit. Cluttered and dark areas invite accidents.

• Do not operate in explosive atmospheres, such as in the presence of flammable liquids,

gases or dust. Power tools create sparks which may ignite the dust or fumes.

• Do not expose to rain or operate in a damp location.

• Keep bystanders, children and visitors away while operating the Handi-Butler tool.

Distractions can cause you to lose control.

Specific Personal Safety Rules:

• Stay alert. Watch what you are doing and use common sense when operating the Handi-

Butler tool. Do not use while tired or under the influence of drugs, alcohol or medication.

A moment of inattention while operating may result in serious personal injury.

• Use Safety Equipment. Always wear safety glasses or goggles when using the Handi-

Butler tool. Wear a dust mask for dusty operations.

• Avoid accidental starting. Ensure the switch on the Sentria system and the air vents

on the Handi-Butler tool are in the off position before plugging in. Plugging in tools

that have the switch on invites accidents. Do not leave tool in a dangerous position.

When turning on the cleaner, make sure it is unobstructed.

• After changing tools or making adjustments, make sure the tip of the Flexible Shaft

or Rotator Shaft and any other adjustment devices are securely tightened. Remove

adjustment wrenches before using. A wrench or key left attached to a rotating part

may result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This enables better

control of the Handi-Butler tool in unexpected situations.

• Keep hair, clothing, fingers and all parts of body away from openings and moving

parts. Do not wear loose clothing or jewelry. Restrain long hair.

• Secure work. Use clamps or a vise to hold work whenever practical. It's safer than

using your hand and it frees both hands to operate the tool. Allow at least 6 inches

between your hand and the spinning tool.

Optional Accessories

Specific Personal Safety Rules (cont.):

• Always hold the tool firmly in your hands.

• Secure Flexible Shaft or Rotator Shaft to the Handi-Butler tool before use.

• Do not reach in the area of the spinning tool on the end of the Flexible Shaft or

Rotator shaft.

• Do not remove the Flexible Shaft or 6" Rotator Shaft while the unit is running.

• Do not touch the spinning parts immediately after use because the tools or tip

might be hot.

• Do not force the Handi-Butler tool. Use the correct tool for your application.

The correct tool will do the job better and safer at the rate for which it was designed.

• Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing the Handi-Butler tool. Such preventive safety measures reduce the

risk of starting the tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons unfamiliar

with the Handi-Butler tool or these instructions to operate the tool. Power tools are

dangerous in the hands of untrained users.

• Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool's operation.

If damaged, have the power tool repaired before use. Many accidents are caused

by poorly maintained power tools.

• Use the Handi-Butler tool, accessories and tool bits, etc., in accordance with these

instructions and in the manner intended for Handi-Butler tool, taking into account the

working conditions and the work to be performed. Use of the Handi-Butler for operations

different from intended could result in a hazardous situation.

• The use of any other accessories not specified with this product may create a hazard.

• Do not alter or misuse the tool. These tools are precision built. Any alteration or

modification not specified is misuse and may result in a dangerous condition.

• Do not leave the tool running or unattended. Turn power off when not in use.

• Do not use drill bits or cutting tools with the Handi-Butler tool. Use only genuine

Kirby® Parts.

Service:

• Have your Handi-Butler tool serviced by an authorized Kirby Distributor using only

identical replacement parts. This will ensure the safety of the Handi-Butler tool

is maintained.

The Handi-Butler tool operates at 18,000 maximum RPM.

Sound Pressure Level Guaranteed Sound Power Level Vibration Level

LpA - EN ISO 3744 LwA - EN ISO 3744 m/s2 - EN ISO 5349

84, 5 dB(A) 98 dB(A) 8.5

FOR HOUSEHOLD USE ONLY

Optional Accessories

FUNCTIONAL DESCRIPTION

The Handi-Butler tool is an air-powered rotary tool that can be used for a wide variety of fine,

detailed cleaning and polishing tasks. It can be used as a hand-held tool or as a stationary,

table-top tool.

A Handi-Butler Tool G Mounting Cradle

B Flexible Shaft H Polishing Compound (not shown)

C Rotator Shaft I Lockout Bar

D Angled Key

E Mini Wrench

F Safety Glasses

The Handi-Butler tool (A) should be used with the Tech Drive®

power assist pedal in Neutral.

/!\ IMPORTANT: The Handi-Butler tool (A) should be used with the Tech Drive®

power assist pedal in Neutral.

The Handi-Butler tool (A) should be used with the Tech Drive®

power assist pedal in Neutral.

When using polishing compound, protect the work surface and

surrounding area by using drop cloths. Wear work clothes to avoid

damage to clothing. Do not use the polish over carpeting.

/!\ NOTICE: When using polishing compound, protect the work surface and

surrounding area by using drop cloths. Wear work clothes to avoid

damage to clothing. Do not use the polish over carpeting.

When using polishing compound, protect the work surface and

surrounding area by using drop cloths. Wear work clothes to avoid

damage to clothing. Do not use the polish over carpeting.

J Screw Mandrel Used with felt polishing tips

K Small Screw Mandrel Used with polishing disks

L Conical Felt Tip Polish plastics, metals, jewelry

M 1/2" Felt Tip Polish plastics, metals, jewelry

N 1" Felt Disk Polish plastics, metals, jewelry

0 1" Cloth Disk Polish plastics, metals, jewelry

P Cup Bristle Brush Cleans silverware and jewelry

Q Wheel Bristle Brush Cleans silverware and jewelry

R Carbon Steel Brush Removes rust or for polishing metal

Cleaning & Polishing Tools Recommended Uses

The Handi-Butler tool includes:

Optional Accessories

USING THE HANDI-BUTLER TOOL IN THE

HAND-HELD MODE

The Handi-Butler Tool Hand-Held Mode gives the user

maximum flexibility when cleaning and polishing an item.

To use the Handi-Butler tool in the hand-held mode,

begin with the hose attached to the front of your

Sentria™ system. >

For ease of use, attach the bit to the Flexible Shaft (B)

before assembling the Handi-Butler tool.

Rotate the tip of the Flexible Shaft (B) until the hole in the tip

lines up with the hole in the grip section. Insert the long end

of the Angled Key (D) into the holes. >

3 Use the enclosed Mini Wrench (E) to loosen the silver

rotating tip at the end of the Flexible Shaft (B). >

Do not bend the Flexible Shaft (B) to a radius less than 2 inches,

it will over heat and fail.

/!\ WARNING: Do not bend the Flexible Shaft (B) to a radius less than 2 inches,

it will over heat and fail.

/!\ WARNING: Do not remove end ferrule while tool is running.

/!\ CAUTION: Safety Glasses (F) should be worn when using the Handi-Butler tool.

Optional Accessories

Select one of the cleaning or polishing tools and insert

into the tip of the Flexible Shaft (B). Firmly tighten the

tip to secure the tool in place with the Mini Wrench (E) .

Remove the Angled Key (D). >

NOTE: The Angled Key (D) must be inserted into the holes

in order to attach or remove a polishing or cleaning tool.

5 Now you are ready to attach the Handi-Butler tool to

your Sentria™ system. Firmly twist the Handi-Butler

tool (A) on to the end of the hose. >

6 Screw the silver end of the Flexible Shaft (B) onto

the Handi-Butler tool (A) making sure the prong in the

center of the Flexible Shaft fits into the center of the

Handi-Butler tool. >

7 To avoid accidental starting, make sure the air inlet

openings on the Handi-Butler tool (A) are CLOSED

before turning your Sentria system on.

Then, turn your Sentria system on. To start the Handi-Butler

tool, rotate the Air Valve of the Handi-Butler tool to expose

the two air inlet openings. You are now ready to gently pol-

ish and clean. Allow the speed of the tool to do all the work.

Avoid putting excessive pressure on the spinning tool. •

To avoid accidental starting, make sure the air inlet openings on

the Handi-Butler tool (A) are CLOSED before turning your

Sentria system on.

/!\ IMPORTANT: To avoid accidental starting, make sure the air inlet openings on

the Handi-Butler tool (A) are CLOSED before turning your

Sentria system on.

To avoid accidental starting, make sure the air inlet openings on

the Handi-Butler tool (A) are CLOSED before turning your

Sentria system on.

/!\ NOTICE: USE GENTLE PRESSURE when using the Handi-Butler tool. Strong

pressure could stop the rotation of the tool break the cleaning or polishing

tool or result in damage to the item being cleaned or polished.

USE GENTLE PRESSURE when using the Handi-Butler tool. Strong

pressure could stop the rotation of the tool break the cleaning or polishing

tool or result in damage to the item being cleaned or polished.

Optional Accessories

USING THE HANDI-BUTLER TOOL IN THE

TABLE-TOP MODE

The Hand-Butler tool table-top mode allows you to hold the

item you wish to polish or clean with two hands for better

control.

In the Table-Top mode, the cleaner should be securely

fixed in the Handi-Butler Mounting Cradle (G) to prevent

the cleaner from moving on the work surface. The cradle

should be bolted (using the provided holes as shown using

1/4" or M6 bolts, washers and nuts) to a stable surface.

Convert your Sentria™ system to the Portable mode. Make

sure that the Tech Drive® pedal is in Neutral. Then, with the

power off and the nozzle removed, carefully lift the unit and

place onto the cradle. >

The rear of the unit should be firmly seated in the

depression of the cradle, with the rear wheels raised

from the work surface and the front of the unit raised to

its highest position. >•

Attach the Air Intake Guard (included with your

Sentria system) to the front of the unit. >

4 Attach the Handi-Butler tool (A) to the Air Intake

Guard. >

/!\ CAUTION: To reduce the risk of injury to the operator, insure that the Handi-Butler

toll is properly secured before use.

To reduce the risk of injury to the operator, insure that the Handi-Butler

toll is properly secured before use.

Some dust created by polishing and cleaning could contain chemicals known to cause cancer, birth

defects or other reproductive harm.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well ventilated area, and work with approved safety

equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Optional Accessories

5 Now you are ready to attach a tool to the 6" Rotator

Shaft. Rotate the tip of the Rotator Shaft (C) until

the hole in the tip lines up with the hole in the grip

section. Insert the long end of the Angled Key (D)

into the holes. >

6 Use the enclosed Mini Wrench (E)to loosen the silver

rotating tip at the end of the Rotator Shaft (C). >

7 Select one of the cleaning or polishing tools and insert

into the tip of the Rotator Shaft (C). Firmly tighten the

tip to secure the tool in place with the Mini Wrench (E).

Remove the Angled Key (D). >

8 Screw the end of the Rotator Shaft (C) onto the

Handi-Butler tool (A) making sure the prong in the

center of the Rotator Shaft fits into the center of the

Handi-Butler tool. >

9 To avoid accidental starting, make sure the air inlet

openings on the Handi-Butler tool (A) are CLOSED

before turning your Sentria™ system on.

Turn your Sentria system on. Then, rotate the Air Valve on

the Handi-Butler tool (A) to expose the two air-inlet open-

ings. You are now ready to gently polish and clean. Allow

the speed of the tool to do all the work. Avoid putting exces-

sive pressure on the spinning tool. •

Optional Accessories

MAINTENANCE

Kirby recommends that all tools be serviced by an authorized

Kirby Distributor.

The polishing tips and brushes in the Handi-Butler tool have

been designed for many hours of use. Check them regularly

for wear and replace when necessary. Only genuine Kirby®

Handi-Butler® tool parts should be used.

Oil the flexible shaft by dripping 3-4 drops of oil along

the drive shaft after every ten uses. •

CHANGING THE ACCESSORIES

Your Handi-Butler tool comes with a variety of polishing

and cleaning tools that can be easily changed to meet your

cleaning needs.

The brushes come pre-assembled. The tools used with the

polishing tips and disks will need to be assembled before use.

PADS FOR USE WITH THE SCREW MANDREL

The Conical Felt Tip (L) and the 1/2" Felt Tip (M) can

easily be screwed onto the Screw Mandrel (J). •

PADS FOR USE WITH THE SMALL SCREW MANDREL

The Small Screw Mandrel (K) is designed for use with

the 1" Felt Disk (N) or the 1" Cloth Disk (O). To attach a

disk, use the handle end of the Mini Wrench (E) to

remove the small screw from the end of the mandrel. >

Put the polishing disk between the two small red

washers found on the Small Screw Mandrel (K) and

place the washers and the disk on the screw. Reinsert

the screw into the Mandrel. Use the Mini Wrench (E) to

tighten it securely. •

Optional Accessories

LOCKING OUT THE HANDI-BUTLER TOOL®

When leaving the Handi-Butler tool in the table-top mode

unattended, it is recommended that the user lock out the tool to

prevent accidental starting or access to the tool by children.

With the unit securely seated in the Mounting Cradle (G),

insert the tines of the Lockout Bar (I) in to the slots at the base

of the On-Off pedal of the Sentria unit. Then, slide the hole on

the Lockout Bar over the eyelet on the Mounting Cradle. The

user can then place a combination lock (not provided) through

the eyelet to securely lock the Handi-Butler tool and prevent it

from running until the lock is removed. •

Operating/Maintenance Tips

PART FIVE

Your Kirby® Sentria™ system is a highly sophisticated

home maintenance system. As with most modern appliances,

it requires a modest degree of routine maintenance to keep

it operating efficiently. This section of the Owner's Manual

presents tips on operating and maintaining your Sentria sys-

tem. In this section, we will discuss the following:

Changing the Power Nozzle Belt

Adjusting the Brush Roll for Optimum

Performance

Miscellaneous Parts Replacement

Helpful Answers to Questions/

Troubleshooting

Operating/Maintenance Tips

CHANGING THE POWER NOZZLE BELT

After extended use, the Power Nozzle Belt on your Sentria™

system may become stretched and worn causing the belt to

slip.(See page 11 - Brush Roll Performance Indicator Light.) If

this condition exists, simply replace the old belt with a new one.

NOTE: Use only approved Kirby® belts.

To change the belt, remove the nozzle from the Sentria

system. Then release the belt tension by using the han-

dle on the Belt Lifter (20) to turn it all the way to the

right (clockwise) until the green arrows line up. >

2 Unlock the Rug Plate (26) by unhooking the two latches

on the rear of the nozzle. >

3 Pull on the rear edge of the Rug Plate to remove from

the nozzle.

Note the Brush Roll Bristle Height Adjustment setting

(1,

2, or 3).

Lift out the Belt and Brush Roll. >

4 Slide off the old belt and replace with a new one.

Operating/Maintenance Tips

CHANGING THE POWER NOZZLE BELT (cont)

Make sure the Brash Roll Bristle Height Adjustment

setting (1, 2, or 3) is the same on both ends as when the

brush was removed. See below for discussion of the

Brush Roll Bristle Height Adjustment (1, 2, or 3). Place the

belt and Brush Roll back into the nozzle. One of the plastic

Brush Roll ends is larger than the other, thus the Brush Roll

will only fit in the nozzle one way.

Then center the belt on the Brush. >

6 Replace the Rug Plate by placing it on the front of the

bumper first and then pulling it over the bumper on

the rear of the Power Nozzle (25). Secure the Rug Plate

using the two latches that hold it in place. >

7 Using the handle on the Belt Lifter (20), turn it to the

left (counter-clockwise) until the red arrows line up.

This will stretch the belt in preparation for returning

the nozzle to the Sentria™ system.

Now you are ready to re-attach the Power Nozzle and

re-engage the belt. •

ADJUSTING THE BRUSH ROLL HEIGHT

The Brush Roll bristles wear away after long periods of use.

This reduces cleaning efficiency.

However, the ends of the Brush Roll are adjustable, so you can

extend the bristles, allowing the brush to work like new again.

The Brush Roll on a new Sentria™ system has three settings:

one notch, two notches and three notches. The greater the num-

ber of notches, the farther the bristles are extended. Use the one

notch (1) setting for delicate carpeting such as berber. Use the

two-notch (2) and three-notch (3) settings to extend the bristles

to compensate for bristle wear. >

Operating/Maintenance Tips

ADJUSTING THE BRUSH ROLL HEIGHT (cont)

Remove the Power Nozzle (25) from the Sentria system. >

Release the belt tension by using the handle on

the Belt Lifter (20) to turn it all the way to the right

(clockwise) until the green arrows line up.

Unlock the two latches on the rear of the Power Nozzle to

remove the Rug Plate (26).

Then lift the brush out of the nozzle. >

3 Rotate the plastic Brash Roll ends to the 1,2 or 3-notch

settings as desired. The greater the number of notches,

the farther the bristles are extended.

When viewed from the top, rotate the plastic Brush Roll ends

to the side with the appropriate number of notches visible.

Make sure both plastic Brush Roll ends are set to the same

number of notches. >

4 Place the brush back into the nozzle making sure both

plastic Brush Roll ends are set to the same number of

notches (1, 2, or 3).

Replace the Rug Plate by placing it on the front of the bum-

per first and then pulling it over the bumper on rear of Power

Nozzle (25). Secure the Rug Plate using the two latches that

hold it in place.

Using the handle, hook the belt onto the Belt Lifter (20) and

turn the Belt Lifter to the left (counter-clockwise) until the

red arrows line up. This will stretch the belt in preparation

for returning the nozzle to the Sentria™ system. •

Keep the entire Brush Roll and belt track clear of lint, string,

hair and other fibers. This will allow the Brush Roll to perform

to its fullest potential.

SERVICE TIP:

Keep the entire Brush Roll and belt track clear of lint, string,

hair and other fibers. This will allow the Brush Roll to perform

to its fullest potential.

Keep the entire Brush Roll and belt track clear of lint, string,

hair and other fibers. This will allow the Brush Roll to perform

to its fullest potential.

Operating/Maintenance Tips

Miscellaneous Parts Replacement

WHEEL WEAR/ REPLACEMENT

Kirby® wheels are made with a pliable tread that is designed

to prevent carpet wear and prevent damage to non-carpeted

floors. After extended periods of use, the tread on the wheels

will wear out and the wheels will need to be replaced.

Check wheel tread occasionally to determine if the wheels

need to be replaced. The tread material is lighter in color

than the plastic wheel itself. If any of the darker plastic

wheel is showing through the tread, the wheels need to be

replaced. The wheels are not user-replaceable. Contact your

nearest authorized Kirby Service Center for prompt, courte-

ous wheel replacement. •

CORD REPLACEMENT

If the electrical cord connecting the Sentria™ system to the

outlet becomes cut or frayed over time, DO NOT USE THE

UNIT. Contact your authorized Kirby Service Center imme-

diately for replacement.

Avoid damage to your cord by being careful not to run over it

with your Sentria system. Also, unplug your unit by grasping

the plug at the end of the cord rather than pulling on the cord

itself. •

HEADLIGHT REPLACEMENT

If one or more of the three LED lights in your Headlight

Assembly burn out, please contact your authorized Kirby®

Distributor for replacement. •

Operating/Maintenance Tips

Questions and Answers/Troubleshooting

Q WHAT IS A DOUBLE-INSULATED MACHINE? (Servicing of double-insulated appliances)

A In a double-insulated appliance, two systems of insulation are provided instead of ground-

ing. No grounding means is necessary on a double-insulated appliance, nor should a means for

grounding be added to the appliance. A double-insulated appliance is marked with the words

"DOUBLE-INSULATED" (U.S.A. and Canada). The symbol • (square within a square) may

also be marked on the appliance.

Servicing a double-insulated appliance requires extreme care and knowledge of the system

and should be done only by qualified service personnel.

Replacement parts for this double-insulated Sentria™ model must be genuine Kirby®

parts for maintenance of safety and protection of warranty.

Q WHAT SHOULD I DO IF THE MOTOR DOES NOT RUN WHEN I TURN

THE Sentria SYSTEM ON?

A Many service calls are unnecessary. Checking a few simple things can save a lot of cost,

time and trouble. Whenever your Sentria system does not perform properly, make these

checks first before calling authorized service personnel.

IF THE MOTOR DOES NOT RUN WHEN THE MOTOR ON-OFF SWITCH IS PUSHED:

1. Make sure the Power Cord is plugged into an outlet and that the outlet has power.

(Check for a blown fuse, tripped circuit breaker or power company trouble.)

2. Make sure the cord plug is fully inserted into the unit.

3. Look for breaks in the Power Cord insulation. If the cord is damaged, get a new one.

DO NOT ATTEMPT TO REPAIR IT. Use only a genuine Kirby Power Cord. Do not use

standard extension cords.

4. Make sure that an attachment or accessory is properly mounted on the front of the

Power Plant. The unit will not run without the Power Nozzle(25), Hose Coupling,

Air Intake Guard or Accessory Brush Nozzle in place.

5. The unit will not operate without either a Filtration Bag Assembly/ Mini Em-Tor® collector (6),

Attachment Hose or Carpet Shampoo Tank properly installed on the Air Exhaust Port (19).

6. The Filtration Bag Assembly/Mini Em-Tor collector, Attachment Hose or Carpet Shampoo

Tank must "click" firmly into place for the unit to operate. If the fitting is too tight and

you have difficulty installing the above, apply a small drop of water to the gasket to

reduce friction and ease installation.

Q WHAT SHOULD I DO IF THE Sentria SYSTEM DOES NOT PICK UP LINT

OR DIRT ON THE CARPET?

A 1. Check to see if the Brush Roll is turning, when the Sentria system is running.

2. If the Brush Roll is not turning freely, the belt is slipping, broken or not on the Motor Shaft (23).

3. If the belt is not on the Motor Shaft (23), remove the nozzle and follow the instructions on

pages 11. See page 56 for bristle extension.

4. If the belt is in good condition and the brush is running, check for bristle wear and replace

Brush Roll, if necessary.

To check for wear, turn the Power Nozzle (25) over and place a ruler against the metal Rug

Plate. If the bristles are below or just touching the ruler, the Brush Roll should be

adjusted. See page 56 for details.

5. Make sure that the nozzle height is adjusted to place the brush in contact with the carpet.

Use the Toe-Touch Control to adjust as appropriate. See page 8.

6. Check the bag to see if it is full.

7. Check the fill tube for clogging.

Operating/Maintenance Tips

Questions and Answers/Trouble shooting

Q I SMELL BURNING RUBBER WHEN I USE MY Sentria™ SYSTEM

WHAT SHOULD I DO?

A 1. Check to see if the Brash Roll is turning when the Sentria system is running. If not, then

the Brush Roll may be stalled due to threads around the ends. Remove Brush Roll and

make sure it rotates freely at both ends. (See page 54.)

2. The belt may not be fully engaged (or disengaged). Make sure the green arrows or red

arrows on the Belt Lifter (20) match up fully.

3. If a slipping belt has deposited a black residue on the Motor Shaft (23), remove it gently

using steel wool or sandpaper and replace the belt.

Q HOW DO I VACUUM MY MATTRESS?

A 1. Remove all bedding, including mattress cover, from the mattress.

2. Convert your upright Sentria system to a Portable Cleaner. See "Portable Cleaning"

on page 16.

3. Place Portable Cleaner on the mattress.

4. Disengage Tech Drive® power assist by pressing the gray "N" side (marked "N" for

Neutral) of the N/D Pedal (11).

5. Disengage the Brush Roll.

6. Plug in your Sentria system and turn it ON.

7. Lower the Power Nozzle by pressing the Toe-Touch Control Upper Pedal (8) until it is

all the way down.

8. Begin vacuuming.

Q HOW DO I VACUUM MY CARPETED STAIRS?

A There are several different ways. You can use:

• the Portable Cleaner. (See page 16.)

• the Zippbrush. (See page 45.)

• or the Upholstery Nozzle. (See page 21.)

Q HOW DO I CLEAN UNDER MY BED?

A Your Sentria system can be used in the canister mode (see page 19) with the Surface

Nozzle to vacuum under the bed and other low furniture.

IMPORTANT:

Always exercise caution when vacuuming stairways.

Operating/Maintenance Tips

Questions and Answers/Troubleshooting

Q HOW DO I VACUUM MY UPHOLSTERED FURNITURE?

A 1. Convert to a canister. (See page 19.) (Do not use Power Nozzle (25) on furniture.)

2. Use the Attachment Hose with or without the following attachments:

• the Upholstery Nozzle.

• the Crevice Tool with the brush removed. (Use in between seat cushions and in crevices.)

• the optional Zippbrush.

The optional Zippbrush uses rotating brushes to agitate fibers and remove imbedded dirt and

pet hair from the fabric. When using the Zippbrush, move it slowly from side to side across

surface. Do not apply heavy pressure as it will slow the brush action. (If the brush becomes

jammed and stops turning, simply rotate the inner rotating brush clockwise to free it up and let

go. It should then resume turning.)

To clean hard-to-reach upholstery buttons, use narrow tip of the Zippbrush, located on the side

opposite the hose, to work the dirt loose. (For additional information on the use and maintenance

of the optional Zippbrush, see the Zippbrush section on page 45).

Q HOW DO I CLEAN MY WALLS AND CEILING?

A 1. Convert to a canister. (See page 19.)

2. Attach one or two Extension Tubes to the Attachment Hose by inserting the hose into the

Extension Tube opening and twisting to lock in place.

3. Attach the Suction Control Grip onto the end of the Extension Tube.

4. Attach the Wall & Ceiling Brush to the end of the Suction Control Grip. The Suction

Control Grip not only allows you to regulate airflow, it also allows you to adjust the Wall

& Ceiling Brush to the proper angles for mantles, window ledges, walls and ceilings.

Q HOW DO I CLEAN MY CAR ?

A Your Sentria™ system comes equipped with a range of tools to help you clean your car.

In addition, you may also use the optional Zippbrush for vacuuming automobile upholstery,

carpeting, floor mats and trunks. (See Zippbrush section on page 45 for Zippbrush use and

maintenance information.)

1. Convert to a canister. (See page 19.)

2. You can use the end of the Attachment Hose for straight suction or attach any one of

a variety of tools.

3. We suggest using the Upholstery Nozzle (or optional Zippbrush) to clean the seats, areas

under the seats and the trunk.

4. Use the Crevice Tool (with or without the small Crevice Tool brush end) for small,

hard-to-reach areas, such as the area between the windshield and dash and the area

between the seats.

5. Use the Duster Brush to clean the instrument panel.

6. Use the Massage Cup to pick up gravel and heavy particles on floor mats and carpeting.

Operating/Maintenance Tips

Questions and Answers/Troubleshooting

Q HOW DO I CLEAN OTHER HOME FURNISHINGS?

A Books and Bookcases:

1. Convert to a canister. (See page 19.)

2. Attach the Duster Brush to the end of the Attachment Hose and "dust" the books and bookcase.

3. Other options include using an Extension Tube with the Duster Brash or the Wall &

Ceiling Brush to dust the bookcase top.

Lampshades and Pictures:

1. Convert to a canister. (See page 19.)

2. Attach the Duster Brush to the Suction Control Grip. Then connect the grip to the Attachment

Hose. Test the airflow by regulating the Suction Control Valve on the Suction Control Grip

before you dust your lampshades. Dust glass-covered artwork and picture frames.

Stereos and Computers:

1. Convert to a canister. (See page 19.)

2. Attach the Duster Brush to the Suction Control Grip. Then connect the grip to the

Attachment Hose. Test the air-flow by regulating the Suction Control Valve on the Suction

Control Grip before you dust your home electronics.

3. Connect the Inflator/Deflator tool to the end of the Attachment Hose to dust between the

keys on a computer key board, faceplates on electronic gear and other hard-to-reach

small spaces.

Wicker Furniture and Baskets:

1. Convert to a canister. (See page 19.)

2. Attach the Duster Brush to the end of the Attachment Hose. Your Duster Brush works well

between cracks and crevices on wicker and other irregular surfaces.

Drapes and Blinds:

1. Convert to a canister. (See page 19.)

2. For drapes, attach one or two Extension Tubes to the Attachment Hose. Connect the

Suction Control Grip to the Extension Tube and then connect the Upholstery Nozzle (with

the faceplate attached). Test the air-flow by regulating the Suction Control Valve on the

Suction Control Grip before you dust your drapes and blinds.

The Suction Control Valve on the Suction Control Grip regulates airflow and prevents you

from pulling the drapes off the curtain rods.

For blinds, follow a similar procedure using the Duster Brash instead of the Upholstery

Nozzle. If using the Suction Control Grip, make sure to completely close the Suction Control

Valve to maintain maximum airflow.

Q WHAT SHOULD I DO IF MY FILTER BAG SMELLS?

A Change it. Replace the disposable bag when the dirt reaches the fill line. Do not overfill.

1. You may also purchase Odorific® II, an odorizer that leaves your room smelling clean and

fresh. Place a few drops on a cottonball and toss it in the Outer Permanent Bag. For a list

of other fine Kirby® products, (see page 64 and 65.)

Consumer Relations

Got a Question? Need Assistance?

Your local authorized distributorship is available to answer any questions

regarding your purchase or the operation of your Sentria™ Home Care

System.

The Kirby Company also has Consumer Relations Specialists available to

answer any questions you may have about the Sentria Home Care System or

provide you with the name of your nearest Kirby distributor.

You can contact USA Consumer Relations by:

e-mail consumer@kirbywhq.com

telephone 1-800-494-8586

fax 216-529-6146

mail Consumer Relations

1920 West 114th Street

Cleveland, Ohio 44102

Our office hours are 8:00 a.m. to 5:00 p.m. Eastern Time, U.S.A.

Kirby® Home Care Products

From Your Factory Authorized Distributors and Service Centers

ALLERGEN CONTROL PRODUCTS

MicroAllergen Filter Bags

Traps 99.97% of particles as small as 0.3 microns. Rated HEPA 11. Minimizes bag odor.

Allergen Control Shampoo

Neutralizes dust mite particles. Reduces allergens caused by pollen. Cleans and brightens carpets.

Kirby Guard Carpet & Upholstery Protector

Minimizes dirt penetration to keep carpets cleaner, longer. Helps to keep spills from seeping

in. Nontoxic and safe for people and pets.

Multi-Allergen Control Spray

Neutralizes allergens on contact. Great for spraying mattresses and upholstery.

Microfiber Cloth

Use when dusting. 30 times finer than cotton. Absorbs 4 times its weight in liquid, dirt and

grime. Washable.

CARPET SHAMPOO PRODUCT FAMILY

Carpet Shampoo

Highly effective product for deep-cleaning carpets and rugs. Carpet-safe and non-toxic.

Multi-Purpose Spot Remover

Ready-to-use formula for everyday stains. Just spray on stain and blot with a clean, white

cloth. Great for use prior to shampooing.

Pre-Treatment for Heavy Traffic Areas

Highly effective formula gives you a "head start" on shampooing. Just spray on heavily-soiled

walkways, entryways and traffic patterns a few minutes prior to shampooing.

Carpet Cleaning Kit

The perfect partner for your carpet! Everything you need to deep-clean your carpets in three

easy-to-use products. One quart of Carpet Shampoo and one 12-oz. bottle each of Spot Remover

and Pre-Treatment. All three products yield best results when used in combination.

STAIN REMOVER PRODUCT FAMILY

Kirby Foam

Effective on heavily-soiled carpeted stairs and other hard-to-reach places. Just spray and blot.

Great for auto and home floor mats!

Pet Stain & Odor Carpet Cleaner

Attacks nasty pet stains and odors with natural enzymes. Active ingredients get right to the core

of carpet's fibers, ensuring that lingering odors are eliminated and that pets won't return to the

same spot.

Grease & Oil Stain Carpet Cleaner

Penetrates and removes the toughest stains... auto grease, garage and cooking oils and more.

Just spray and blot.

Food Stain Carpet Cleaner

Specially formulated cleaner with natural enzymes that work to break the chemical bonds of

tough food stains, grape juice, red wine, chocolate, ketchup and more.

Kirby® Home Care Products

From Your Factory Authorized Distributors and Service Centers

HARD SURFACE PRODUCT FAMILY

Scuttle® Glass & Surface Cleaner

A traditional Kirby favorite; great for hard surfaces such as countertops, appliances as well as

windows, mirrors and more. Dries to a streak-free shine.

Citrus Scuttle

Heavy-duty cleaner for all types of indoor and outdoor surfaces. Great for ovens, grills,

machinery and work areas.

Lickity Split

All-purpose dissolver works better than any goo remover on the market. Use it to dissolve tape,

glue, gum, stickers, asphalt, lipstick, crayon, oil, tar, adhesives, permanent marker and more.

HOME FRAGRANCE PRODUCT FAMILY

HomeFresh Room and Carpet Freshener

Leaves carpets and rooms smelling pleasantly fresh while eliminating odors. Just sprinkle on

carpets and vacuum after a few minutes. Available in 5 fresh fragrances.

Odorific® II Deodorizer

All-purpose liquid deodorizer. Great for areas with foul odors like trash cans and damp-corners.

A few drops is all you need. Also, a few drops are great for deodorizing your vacuum's outer

cloth bag. Fresh fragrance lingers for many hours.

OTHER FINE KIRBY PRODUCTS AND SUPPLIES

Extendable Crevice Tool

Clean under refrigerators, low furniture, and radiator vents. 5-piece tool set lets you continue

to add pieces until you reach the desired length.

Mini Attachments

This set includes a mini hose and 5 mini attachments that are great for small detail cleaning.

Get into cracks and crevices on computer keyboards, figurines, dashboards, and pianos.

Splitsecond® Portable Hand Vacuum

This cordless portable hand vacuum can be used where cord-type cleaners cannot reach.

Comes complete with handy re-charging unit so it's always ready for use.

Splitsecond 2® Automotive Vacuum

The twelve-volt automotive version of the popular Splitsecond portable hand vacuum plugs

into a standard cigarette lighter. Perfect for cars, boats, campers and recreational vehicles.

Contact Your Factory Authorized Location for these and other Kirby Home Care Products.

Index

About this Manual 4

Accessories 29

Accessory Lock 19

Air Intake Guard 23

Attaching Bar 19

Attachments 18

Attachment Hose 19

Crevice Tool 21

Duster Brush 20

Extension Tubes 20

Inflator/Deflator 24

Massage Cup 22

Suction Control Grip 22

Surface Nozzle 20

Upholstery Nozzle 21

Wall & Ceiling Brush 21

Bag

Assembly-removal 10

Bag Release Button 16

Bag Support Strap 10

Changing Bags 9

Disposable Filter Bags .... 9

Outer Permanent Bag .... 10

Top Adaptor 9

Belts

Changing Belts 54

Belt Lifter 10

Blower

set-up 23

using 24

Brush Roll

adjusting for optimum

performance 56

height adjustment 56

indicator light 11

Canister Cleaner 18

Carpet Fluffer 41

Carpet Shampoo System 30

cleaning 33

replacing the belt 35

set-up 30

Suds Control Valve 32

tray 30

using 32

Carrying your machine 7

Cleaning products 64

Crevice Tool 21

Disposable Filter Bags 9

Duster Brush 20

Extension Tubes 20

Floor Buffer 39

set-up 39

using 40

Getting Started 6

Handle

Attaching Portable Handle . 16

Handle Tilt Latch 7

Handle Release Button .... 16

removing Upright Handle . . 16

Handi-Butler® Tool 46

Changing Accessories 52

Functional Description .... 47

Hand-Held Mode 48

Maintenance 52

Safety Instructions 46

Table-Top Mode 50

Hard Floor Pad 16

Hose -installing 19

Inflator/Deflator Tool 24

Kirby® Carpet Shampoo . . . . 31,64

Maintenance tips 53

Massage Cup 22

Mattress cleaning 17

Micron Magic® filtration 15

Mini Em-Tor® collector 10

Miracle Waxer® floor polisher.. 37

Miscellaneous Parts 58

Replacement

Moving your machine 7

Operating Tips 53

Optional Accessories 29

Owner's Manual-using 4

Portable Cleaner 16

Portable Handle 16

Portable Shampooer

set-up 27

using 28

Portable Sprayer

adjusting spray 26

cleaning 26

Dip Tube 26

Jar 25

set-up 25

using 26

Power Nozzle

changing the belt 54

disengaging Brush Roll. ... 15

height setting 8

lowering 8

raising 8

removal 19

Rug Plate 54

Brush Roll 54

Power Switch 14

Questions & Answers 59

Replacement Belts 54

Safety Instructions 2

Stair Cleaning 17

Straight Suction Cleaning 15

Suction Control Grip 22

Surface Nozzle. 20

Tech Drive® Power Assist

description 8

ON/OFF Pedal 8

Turning off 8

Turning on 8

Tilt Latch Lock 7

Toe-Touch Control 7

Turbo Accessory System 42

clamp levers 42

Dust Shroud 43

massage 44

polishing 44

rear clamp 43

sanding 43

scouring 44

set-up 42

Upholstery Nozzle 21

Upright Cleaner 14

Upright Handle-removing 16

Wall & Ceiling Brush 21

Zippbrush

Turbine 45

cleaning 45

Outer Brush Ring 45

using 45

C€ DECLARATION OF CONFORMITY

We, Kirby, declare under our sole responsibility that, where applicable,

the Kirby Model G10E Vacuum Cleaner is in conformity with the

following standards or standardized documents.

IEC 60335-1 (EN 60335-1), IEC 60335-2-2 (EN 60335-2-2),

EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3 and EN 50366

in accordance with the regulations including the Low Voltage Directive

73/23/EEC, 93/68/EEC and EMC Directive 89/336/EEC

C€ 95

KIRBY

1920 West 114th Street • Cleveland, OH 44102 • U.S.A.

Made under one or more of the following patents and design registrations,

other patents and design registrations pending.

United States

4692754

4728942

4877432

4905343

4947512

5007133

5014387

5047597

5057131

5064455

5086536

5092915

5115537

5187832

5285550

5308288

5335740

5573369

5713810

5784750

5792224

D392779

D396902

Canada

1271006

2016600

2036739

Australia Mexico

582715

175879

610422 Netherlands

616833 0233933

633948

640711

New Zealand

661597 236192

Austria

Norway

0233933

169940

175085

Belgium

0233933 South Africa

S.A. Patent No. 90/5400

Benelux S.A. Patent No. 93/5427

0233933 South Korea

France 75716

0233933 Sweden

Germany 0233933

Geschutztes Muster

M9002507.5 Switzerland

P3650439.4-08 0233933

68916013.5 United Kingdom

Italy

U.K. Patent 0233933

0233933 U.K. Patent 0399031

U.K. Patent 2229651

Japan U.K. Reg. 2005900

1997813

2011083

Luxembourg

0233933

Sentria™

No. Part

1 Outer Permanent Bag

2 Bag Latch Tab

3 Disposable Filter Bag

4 Bag Support Strap

5 Top Adaptor

6 Mini Em-Tor® Collector

7 Performance Indicator Light

8 Toe-Touch Control Upper Pedal

9 Toe-Touch Control Bottom Pedal

10 Handle Tilt Latch

11 Tech Drive Power Assist Neutral Pedal

12 Tech Drive Power Assist Drive Pedal

13 Power Switch

14 Handle Release Button

15 Portable Handle

16 Bag Release Button

17 Upright Handle

18 Carrying Grip

19 Air Exhaust Port

20 Belt Lifter

21 Headlight Hood

22 Accessory Lock

23 Motor Shaft

24 Attaching Bar

25 Power Nozzle

26 Bumper

Accessories and Attachments

27 Carpet Shampoo System Shampoo your carpet.

28 Floor Care System Floor buffer for wood or tile floors. Carpet fluffer to

reset the nap on a matted-down carpet.

29 Hard Floor Pad Dust bare floors.

Accessories and Attachments

No.

Part

Recommended Uses

Kaddy

Storage of accessories.

31 Portable Sprayer Attach onto attachment hose with unit in blower mode

only to apply water-based, non-flammable liquids.

32 Portable Handle To transform unit from upright to portable position by

removing upright handle and inserting portable handle.

Aids in cleaning of carpeted stairs and mattress cleaning.

33 Portable Shampooer Cap Attach onto portable sprayer with unit in blower mode

to apply Kirby® Carpet Shampoo for spot cleaning.

34 Massage Cup Skin/scalp massage. Clean the floors of cars.

35 Inflator/Deflator Tool With unit in blower mode, use to inflate toys, air

mattresses or other low-pressure inflatable items up to

1 p.s.i. With unit in canister mode, use to deflate objects.

36 Duster Brush With or without extension tubes on contoured or

irregular surfaces.

37 Upholstery Nozzle Upholstered furniture, carpeted stairs, clothing.

Vehicle interiors.

39 Wall and Ceiling Brush Walls, ceilings, drapes and other surfaces.

40 Suction Control Grip Use when needing to control amount of suction such as

drapes and delicate lampshades. Use with or without

extension tubes.

41 Extension Tubes Extend reach and use with other tools.

42 Attachment Hose Convert from upright to canister or blower mode.

43 Replacement Belt Emergency back up supply.

44 Crevice Tool with

Removable Brash Without brash, use on cracks, crevices, corners, grooves

and narrow openings. With brush use on corners, button

tufts, between radiator coils and sliding window tracks.

45 Surface Nozzle Bare floors, surface cleaning carpets and under low furniture.

46 Air Intake Guard Place on front of unit to convert unit into a blower.

Zippbrush

Upholstery, carpeted stairs. Automotive interiors.

48 Turbo Accessory System Sander, Buffer, Scouring, Massaging.

49 Miracle Waxer®

Floor Polisher For Hardwood, Vinyl, Cork and Linoleum floors.

Apply with roller waxer applicator.

50 Handi-Butler® Tool Cleaning and polishing.

IMPORTANT

The following information need only apply when changing plugs on Sentria™ models

that are used in the U.K., Australia, South Africa and New Zealand.

The wires in the main lead are coloured in accordance with the following code:

Blue Neutral Brown Live

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured marking identifying

the terminals in your plug, proceed as follows:

WARNING: DO NOT connect either wire to the terminal marked "E" or with the earth = symbol. No wire is con-

nected to this terminal. The wire which is coloured Blue must be connected to the terminal which is marked with the letter

N or coloured black. The wire which is coloured Brown must be connected to the terminal which is marked with the letter

L or coloured red. If a U.K.: 13A (BS 1363) plug is used, fit a 5A fuse. For any other type plug, protect with a 5A fuse or

fuse wire in the adaptor or distribution board. If the plug does not fit the sockets in the user's house, it should be cut off

and safely disposed of and the correct plug fitted.

The Sentria™ Model G10E is approved by the British Electrotechnical Approvals Board (BEAB).

Warning: There is a shock hazard if a plug that has been cut from

the supply cord is inserted in a 13A socket outlet. Any

replacement fuse in the plug must be an ASTA approved

BS1362 5A fuse in the U.K.

Warning: If the fuse cover is removable, never use the plug with the

fuse cover removed.

If supply cord is damaged and needs to be replaced, the replacement part number is: 890806-Australia/New Zealand;

890906-Continental Europe; 890706-South Africa; 890606-United Kingdom; 192006-U.S.A.;

Kirby Sentria Vacuum Cleaner Users Manual Owner's

Sentria to the manual 7abe571e-9f92-4fe9-8f2f-c6cb16aad1d2

Navigation menu

Versions of this User Manual:

Views

Navigation