Kirkland Signature Whirlpool 8051560 Users Manual

WHIRLPOOL SUD6000 Use and Care Guide - 8051560

SUD6000 to the manual 4b866357-1825-4bb8-a493-db1f8cf431da

2015-01-24

: Kirkland-Signature Kirkland-Signature-Whirlpool-8051560-Users-Manual-342012 kirkland-signature-whirlpool-8051560-users-manual-342012 kirkland-signature pdf

Open the PDF directly: View PDF PDF.
Page Count: 24

DownloadKirkland-Signature Kirkland-Signature-Whirlpool-8051560-Users-Manual- 8051560  Kirkland-signature-whirlpool-8051560-users-manual
Open PDF In BrowserView PDF
TM

UNDERCOUNTER
DISHWASHER
Use & Care Guide
Table of Contents ...................................... 2

Models SUD6000
8051560

TABLE OF CONTENTS
DISHWASHER SAFETY ................................................... 3
Before Using Your Dishwasher ....................................... 4
PARTS AND FEATURES.................................................. 5
START-UP GUIDE............................................................... 6
Using Your New Dishwasher........................................... 6
Stopping Your Dishwasher.............................................. 6
LOADING YOUR DISHWASHER ....................................... 7
Loading Suggestions ....................................................... 7
Loading the Top Rack ..................................................... 7
Loading the Bottom Rack ............................................... 8
Loading the Silverware Basket ....................................... 9
USING YOUR DISHWASHER........................................... 10
Detergent Dispenser ...................................................... 10
How Much Detergent to Use......................................... 10
Rinse Aid Dispenser....................................................... 11
Dishwasher Efficiency Tips ........................................... 11
Cycle Selection Chart .................................................... 12
Canceling a Cycle .......................................................... 13
Option Selections........................................................... 13
Cycle Status Indicators.................................................. 14
Drying System ................................................................ 14
Overfill Protection Float ................................................. 14
WASHING SPECIAL ITEMS ............................................. 15
CARING FOR YOUR DISHWASHER ............................... 16
Cleaning Your Dishwasher ............................................ 16
Drain Air Gap .................................................................. 16
Storing Your Dishwasher............................................... 17
TROUBLESHOOTING....................................................... 18
ASSISTANCE OR SERVICE ............................................. 20
In the U.S.A..................................................................... 20
In Canada........................................................................ 20
WARRANTY....................................................................... 24

2

DISHWASHER SAFETY
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the word “DANGER” or
“WARNING.” These words mean:

DANGER

You will be killed or seriously injured if you don't
follow instructions.

WARNING

You can be killed or seriously injured if you don't
follow instructions.

All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS
WARNING : When using the dishwasher, follow basic precautions, including the following:
■
■
■

■

■

■

Read all instructions before using the dishwasher.
Use the dishwasher only for its intended function.
Use only detergents or rinse agents recommended
for use in a dishwasher, and keep them out of the
reach of children.
When loading items to be washed:
1) Locate sharp items so that they are not likely to
damage the door seal; and
2) Load sharp knives with the handles up to reduce
the risk of cut-type injuries.
Do not wash plastic items unless they are marked
“dishwasher safe” or the equivalent. For plastic
items not so marked, check the manufacturer's
recommendations.

■

■
■

■

Do not operate the dishwasher unless all enclosure
panels are properly in place.
Do not tamper with controls.
Do not abuse, sit on, or stand on the door or dish
racks of the dishwasher.
To reduce the risk of injury, do not allow children to
play in or on the dishwasher.

■

Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the dishwasher
turn on all hot water faucets and let the water flow
from each for several minutes. This will release any
accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.

■

Remove the door to the washing compartment when
removing an old dishwasher from service or
discarding it.

Do not touch the heating element during or
immediately after use.

SAVE THESE INSTRUCTIONS

3

Before Using Your Dishwasher

GROUNDING INSTRUCTIONS
■

For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event
of a malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a
path of least resistance for electric current. The
dishwasher is equipped with a cord having an
equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet that is installed and grounded in
accordance with all local codes and ordinances.

WARNING: Improper connection of the

Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.

■

equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified
electrician or service representative if you are in
doubt whether the dishwasher is properly
grounded. Do not modify the plug provided with
the dishwasher; if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
For a permanently connected dishwasher:
The dishwasher must be connected to a
grounded metal, permanent wiring system, or an
equipment-grounding conductor must be run
with the circuit conductors and connected to the
equipment-grounding terminal or lead on the
dishwasher.

SAVE THESE INSTRUCTIONS
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
■

Install where dishwasher is protected from the
elements. Protect against freezing to avoid possible
rupture of fill valve. Such ruptures are not covered by
the warranty. See “Storing Your Dishwasher” in the
“Caring for Your Dishwasher” section for winter storage
information.

■

Install and level dishwasher on a floor that will hold the
weight, and in an area suitable for its size and use.

■

Remove all shipping plugs from hoses and connectors
(such as the cap on the drain outlet) before installing.
See Installation Instructions for complete information.

4

PARTS AND FEATURES
1.

8.
9.

2.

10.

3.

11.

4.

12.
13.

5.
14.
6.

15.

16.

17.
7.
1. Third level wash

10. Light items clip

2. Top spray arm

11. Model and serial number label

3. Heating element

12. Fold-down divider

4. Water inlet opening

13. Lower spray arm

5. Bottom rack

14. Silverware basket

6. Rack bumper

15. Overfill protection float

7. Vent

16. Detergent dispensers

8. Top rack

17. Rinse aid dispenser

9. Cup shelf

Control Panel

Press AIR DRY 5 Seconds
to Lock/Unlock controls

5

START-UP GUIDE

5. Select the desired cycle and options. (See “Using Your
Dishwasher.”)

Before using your dishwasher, remove all hang tags,
temporary labels, and packaging materials. Read this
entire Use and Care Guide. You will find important safety
information and useful operating tips.

Using Your New Dishwasher

The dishwasher starts filling when you press a cycle. You
can select options as the machine is filling.

1. Scrape large food soil and hard items (toothpicks or
bones) from dishes.
2. Properly load the dishwasher. (See “Loading Your
Dishwasher.”) Make sure nothing prevents the spray
arm(s) from spinning freely.

Stopping Your Dishwasher
You can stop your dishwasher anytime during a cycle.
1. Open the door slightly.
2. Wait for the spraying action to stop. Then open the
door all the way, if needed.
Close the door to continue the cycle.
OR
Press CANCEL/DRAIN. A 2 minute drain starts.

3. Add detergent and check the rinse aid dispenser. Add
rinse aid if needed. (See “Using Your Dishwasher.”)

4. Push door firmly closed. The door latches
automatically. Run hot water at the sink nearest your
dishwasher until the water is hot. (See “Dishwasher
Efficiency Tips.”) Turn off water.

6

LOADING YOUR
DISHWASHER
Loading Suggestions
■

Loading the Top Rack
The top rack is designed for cups, glasses, and smaller
items. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary
from the drawings shown.
Do not cover third level spray. See arrow.

Remove leftover food, bones, toothpicks and other
hard items from the dishes. It is not necessary to rinse
the dishes before putting them in the dishwasher. The
wash module removes food particles from the water.
The module contains a chopping device which will
reduce the size of food items.
Cup and glass load

NOTE: If hard items such as fruit seeds, nuts, and egg
shells enter the wash module, you might hear chopping,
grinding, crunching, or buzzing sounds. These sounds
are normal when hard items enter the module. Do not let
metallic items (such as pot handle screws) get into the
wash module. Damage can occur.
■

Load dishes so soiled surfaces face the spray (down or
inward). It is important for the water spray to reach all
soiled surfaces.

■

Load dishes so they are not stacked or overlapping if
possible. For best drying, water must be able to drain
from all surfaces.

Mixed load
■

Place items so open ends face down for cleaning and
draining.

■

Make sure pot lids and handles, pizza pans, cookie
sheets, etc. do not interfere with the spray arm rotation.

■

■

Run a rinse cycle to keep dishes moist if you do not
plan to wash them soon. Foods like eggs, rice, pasta,
spinach, and cooked cereals may be hard to remove if
they are left to dry over a period of time.

Load glasses and cups in top rack only. The bottom
rack is not designed for glasses and cups. Damage can
occur.

■

Place cups and glasses in the rows between prongs.
Placing them over the prongs can lead to breakage.

■

To avoid chipping, do not let stemware touch other
items.

■

China, crystal, and other delicate items must not touch
each other during dishwasher operation. Damage can
occur.

■

Wedge lightweight items against one another or
overlap them with heavier dishes.

■

Load plastic items securely in the top rack only. Wash
only plastic items marked “dishwasher safe.”

■

Small bowls, pans, and other utensils can be placed in
the top rack.

■

Load bowls in the center section for best stability.

Quiet operating tips
To avoid thumping/clattering noises during operation:
■

Make sure lightweight load items are secured in the
racks.

■

Make sure pot lids and handles, pizza pans, cookie
sheets, etc. do not touch interior walls or interfere with
the rotation of the spray arm.

■

Load dishes so they do not touch one another.

NOTE: For built-in models, keep sink drain plugs closed
during dishwasher operation to prevent noise transfer
through drains.

7

Adjustable 3-position top rack

Light Items Clips

You can raise or lower the top rack to fit tall items in either
the top or bottom rack. Two adjusters are located on each
side of the top rack. Each adjuster has 3 preset positions.
The high and low positions are marked on the adjuster.

You can hold lightweight plastic items like cups, lids, or
bowls in place during washing with the Light Items clips.
You can move a clip anywhere in the rack.

To adjust the top rack
1. Hold the top rack with one hand near the adjuster.

To move a clip
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
2. With the other hand, pull out the top of the adjuster.
3. Raise or lower the rack to one of the preset positions.
4. Release the adjuster.

Small items basket
This basket fits in the top rack. Use it to hold small items
that could otherwise “fly” around inside the dishwasher
during a cycle.

Repeat the steps for the remaining adjusters as needed.
The 4 adjusters can be raised or lowered separately or
together. The top rack does not have to be level.

Cup shelf
Fold down the extra shelf on the right side of the top rack
to hold additional cups, or long items such as utensils and
spatulas.

Loading the Bottom Rack
The bottom rack is designed for plates, pans, casseroles,
and utensils. Items with cooked-on or dried-on food
should be loaded with soiled surfaces facing inward to the
spray. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary
from the drawings shown.
Do not cover spray tower. See arrow.

Mixed load
■

8

Do not load glasses, cups, or plastic items in the
bottom rack. Load small items in the bottom rack only
if they are secured in place.

■

Load plates, soup bowls, etc., between prongs and
facing inward to the spray.

■

Overlap the edges of plates for large loads.

■

Load soup, cereal, and serving bowls in the rack in a
variety of ways depending upon their size and shape.
Load bowls securely between the rows of prongs. Do
not nest bowls because the spray will not reach all
surfaces.

Loading the
Silverware Basket
Load the silverware basket while it is in the bottom rack or
take the basket out for loading on a counter or table.
NOTE: You can remove the basket for easy unloading.
Unload or remove the basket before unloading the racks to
avoid spilling water droplets on the silverware.

Utensil load
■

Secure heavily soiled cookware face down in the rack.

■

Make sure pot handles and other items do not stop
rotation of the spray arm(s). The spray arm(s) must
move freely.

■

Do not load items between the bottom rack and the
side of the dishwasher tub. You can block the water
inlet opening.

Mix items in each section of the basket with some pointing
up and some down to avoid nesting. Spray cannot reach
nested items.

NOTE: If you have removed the bottom rack for unloading
or cleaning, replace it with the bumpers in front.

Fold-down tines
You can fold down one or both rows of tines at the back of
the bottom rack.

IMPORTANT: Always load sharp items (knives, skewers,
forks, etc.) pointing down.
NOTES:
■

Do not load silver or silver-plated silverware with
stainless steel. These metals can be damaged by
contact with each other during washing.

■

Some foods (such as salt, vinegar, milk products, fruit
juices, etc.) can pit or corrode silverware. Run a rinse
cycle if you do not have a full load to wash immediately.

1. Grasp the tip of the tine that is in the tine holder.
2. Gently pull the tine out of the tine holder.
3. Lay the row of tines down in the rack to make room for
larger dishes, bowls, pots, pans or roasters.

9

USING YOUR
DISHWASHER

How Much Detergent to Use
■

The amount of detergent to use depends on the
hardness of your water and the type of detergent. If you
use too little, dishes won’t be clean. If you use too
much in soft water, glassware will etch.

■

Water hardness can change over a period of time. Find
out your water’s hardness by asking your local water
department, water softener company, or county
extension agent.

■

Different brands of dishwasher detergent have different
amounts of phosphorous for softening water. If you
have hard water and use a detergent with a
phosphorous content of less than 8.7%, you might
need to use more detergent, or use a detergent with a
phosphorous content higher than 8.7%.

Detergent Dispenser
The detergent dispenser has 2 sections. The Pre-Wash
section empties detergent into the dishwasher when you
close the door. The Main Wash section automatically
empties detergent into the dishwasher during the wash
cycle.
■

Use automatic dishwashing detergent only. Other
detergents can produce excessive suds that can
overflow out of the dishwasher and reduce washing
performance.

■

Add detergent just before starting cycle.

■

Store tightly closed detergent in a cool, dry place.
Fresh automatic dishwasher detergent results in better
cleaning.

Where to fill
Top of 3rd step (3 tbs or 45 g)

NOTE: Do not use detergent with a rinse cycle.

Top of 2nd step (2 tbs or 30 g)

Filling the dispenser
1. If the dispenser cover is closed, open the cover by
pushing the Cover latch.

1

2

PRE-WASH

PRE-WASH

3

Top of 1st step (1 tb or 15 g)

Water Hardness

Amount of Detergent

Soft to Medium
Hard Water

For normal loads

0 to 6 grains per
gallon

■

Partially fill the Main Wash
section (2 tbs or 30 g)

■

Fill the Pre-Wash section
(2 tbs or 30 g)
NOTE: Add only 1 tb or 15 g of
detergent to both sections if
dishes are prerinsed or the
water is very soft.

For heavily soiled loads:

2. Fill the Main Wash section with detergent. See “How
Much Detergent to Use.”
3. Close the Main Wash dispenser cover. Fill the PreWash section if needed.
It is normal for the cover to open partially when dispensing
detergent.
NOTE: Use both sections for cycles with 2 washes. Use
only the covered section for cycles with 1 wash. See the
“Cycle Selection Chart” for more details.

10

■

Fill the Main Wash section
(3 tbs or 45 g)

■

Fill the Pre-Wash section
(3 tbs or 45 g)

Medium to Hard
Water

For normal and heavily soiled
loads:

7 to 12 grains per
gallon

■

Fill the Main Wash section
(3 tbs or 45 g)

■

Fill the Pre-Wash section
(3 tbs or 45 g)

NOTE: Fill amounts shown are for standard powdered
detergent. Amounts may vary if you use liquid or
concentrated powdered detergent. Follow instructions on
the package when using liquid dishwasher detergent or
concentrated powdered detergent.

Rinse Aid Dispenser
A rinse aid prevents water from forming droplets that can
dry as spots or streaks. It also improves drying by allowing
water to drain off of the dishes during the final rinse by
releasing a small amount of the rinse aid into the rinse
water. Your dishwasher is designed to use a liquid rinse
aid. Do not use a solid or bar-type rinse aid.

Dishwasher Efficiency Tips
Hot water dissolves and activates the dishwashing
detergent. Hot water also dissolves grease on dishes and
helps glasses dry spot-free. For best dishwashing results,
water must be at least 120°F (49°C) as it enters the
dishwasher. Loads may not wash as well if the water
temperature is too low.

To check water temperature
1. Run hot water at the faucet closest to your dishwasher
for at least 1 minute.
2. Measure the water temperature with a candy or meat
thermometer placed in the running stream of water.

Checking the dispenser
Check the center of the Fill Indicator Cap. Clear means it
needs filling.

OR

3. If the water temperature at the faucet is below 120°F
(49°C), have a qualified person raise the water heater’s
thermostat setting.
Or you can remove the Fill Indicator Cap. If an “E” is
visible, the dispenser is empty.

■

To save water and energy, do not rinse dishes before
putting them into the dishwasher.

■

Use a low energy, quick, or short cycle whenever
possible. These cycles use less hot water and energy
than the Normal wash cycle.

■

Use a delay feature (on some models) to run your
dishwasher during off-peak hours. Local utilities
recommend avoiding heavy usage of energy at certain
times of day.

■

During the summer, run your dishwasher at night to
reduce daytime heat buildup.

■

Use an air dry, or an energy saving dry option whenever
possible. Allow longer drying times (overnight) when
using these options. Use a rinse aid to improve drying.

■

Use cycles or options that add extra heat to the wash
or rinse portion of the cycle only when needed.

■

Run your dishwasher with full loads. Run a rinse cycle
after meals until the dishwasher is full.

Filling the dispenser
The rinse aid dispenser holds 6 oz (175 mL) of rinse aid.
Under normal conditions, this will last for about three
months. You do not have to wait until the dispenser is
empty to refill it. Try to keep it full, but be careful not to
overfill it.
1. Make sure the dishwasher door is completely open.
2. Remove the Fill Indicator cap.
3. Add rinse aid. Fill to the smallest opening in the lower
part of the dispenser. Overfilling can cause the rinse aid
to leak out, and could cause oversudsing.

4. Clean up any spilled rinse aid with a damp cloth.
5. Replace the Fill Indicator Cap. Close tightly.

11

Use this cycle for pre-rinsed or lightly soiled

Cycle Selection Chart

loads.
LOW
ENERGY

Select the wash cycle and options desired. The
dishwasher starts filling once you press a cycle, unless you
select the delay wash. You can select an option as the
machine is filling.

Use covered detergent dispenser section.

PreWash

Rinse

Rinse

●

●

Purge†

Final
Rinse

Dry

Time
(min)

Water
Usage

●

●

68*

6.5/24.6

(gal/L)

After a wash cycle, the dishwasher remembers the options
used and uses the same options in the next wash cycle
unless new options are selected or Cancel/Drain is
selected.

140°F
(60°C)

Use this cycle for loads with normal amounts
of food soil. (The energy usage label is based
NORMAL on this cycle.)
Use both detergent dispenser sections.

A “●” shows what steps are in each cycle.

PreWash

RINSE
ONLY

Main
Wash

Use this rinse cycle for rinsing dishes, glasses,
and silverware that will be washed later.

Rinse

Main
Wash

Rinse

Purge†

Final
Rinse

Dry

Time
(min)

Water
Usage

●

●

●

72

6.9/26.1

(gal/L)

●

●

140°F
(60°C)

Do not use detergent with the rinse cycle.
PreWash

Rinse

Main
Wash

Rinse

Purge†

Final
Rinse

Dry

Time
(min)

Water
Usage

10

2.2/10.0

Use this cycle for heavily soiled loads.

(gal/L)

●

HEAVY

Use both detergent dispenser sections.
PreWash

CHINA

Use this cycle for china and crystal. The cycle
uses a light wash and gentle dry.

Rinse

Main
Wash

Rinse

Purge†

Final
Rinse

Dry

Time
(min)

Water
Usage

●

●

64*

6.5/24.6

(gal/L)

●

●

140°F
(60°C)

Main
Wash

Rinse

●

●

140°F
(60°C)

140°F
(60°C)

●

Purge†

Final
Rinse

Dry

Time
(min)

Water
Usage

●

●

82

8.6/32.6

(gal/L)

Use covered detergent dispenser section.
PreWash

Rinse

POTS
-NPANS
PreWash

140°F
(60°C)

Use this cycle for hard-to-clean, heavily soiled
pots, pans, casseroles, regular tableware.
Use both detergent dispenser sections.

Rinse

Main
Wash

Rinse

●

●

140°F
(60°C)

140°F
(60°C)

●

Purge†

Final
Rinse

Dry

Time
(min)

Water
Usage

●

●

87

8.6/32.6

(gal/L)

12

140°F
(60°C)

*

Cycle time includes dry time and might be longer
depending on the temperature of the water entering the
dishwasher. The cooler the water, the longer the cycle
time. If the water is already hot enough, the cycle time
will be as shown.

†

A small amount of water runs through the pump to
remove soil particles.

Canceling a Cycle
Anytime during a cycle, press

Air Dry
Select this option to dry dishes without heat and save
energy. The dishes take longer to dry and some spotting
can occur.
AIR DRY

CANCEL
DRAIN

For best drying, use a liquid rinse aid. Some items (such as
plastics) may need towel drying.
CANCEL/DRAIN glows. The dishwasher pauses for about
5 seconds and starts a 2 minute drain (if needed). Let the
dishwasher drain completely. The light goes off when the
dishwasher finishes the drain.

NOTE: The dishwasher automatically heats the air in the
dishwasher during the “dry” portion of the cycle unless
you select Air Dry.

To stop the drain

Delay Hours

You can press Cancel/Drain again to stop the drain
immediately. Remember to drain the dishwasher before
starting a new cycle.

Select this option to run your dishwasher at a later time or
during off-peak hours. You can add items to the load
anytime during the delay countdown. After adding items,
close the door firmly until it latches. The delay countdown
will not continue if the door is not latched.

NOTE: A small amount of water remains in the dishwasher.
This is normal.

To clear the indicators

DELAY
HOURS

Press Cancel/Drain before starting the dishwasher to clear
all options and cycles.
To delay the start

Option Selections

1. Close the door.

You can customize your cycles by pressing an option. If
you change your mind, press the option again to turn the
option off. Select a different option if desired.

2. Press DELAY HOURS 1 time for a 2-hour delay, 2 times
for a 4-hour delay, or 3 times for a 6-hour delay start.

You can change an option anytime before the selected
option begins. For example, you can press an unheated
drying option any time before drying begins.

The number glows above Delay Hours. The dishwasher
starts the cycle in the selected number of hours. If you do
not press a cycle within 30 seconds the Delay Hours
indicator turns off.

After a wash cycle, the dishwasher remembers the options
used and uses the same options in the next wash cycle,
unless you select new options or press Cancel/Drain.

High Temp Wash
Select this option to heat the water to 140°F (60°C) in the
main wash cycle. This option adds heat and wash time to
the parts of the cycle. Heating the water helps improve
washing results.
HIGH
TEMP
WASH

3. Select a wash cycle and option(s).

NOTES:
■

To cancel the delay and cycle, press CANCEL/DRAIN.

■

To cancel the delay and start the cycle, press DELAY
HOURS until 6 glows. Then press DELAY HOURS one
more time. The delayed cycle starts.

IMPORTANT:
■

Operate your dishwasher only when you are at home.

■

If your home is equipped with a water softener, do not
start the dishwasher during the regeneration of the
softener.

NOTE: The Heavy and Pots-N-Pans cycles automatically
use this option. High Temp Wash is an option with the Low
Energy and Normal cycles.

13

Cycle Status Indicators
Follow the progress of your dishwasher with the Cycle
Status Indicators. CLEAN glows when a cycle is finished.
The light turns off when you open the door or press
Cancel/ Drain.

To lock the controls
Press and hold

AIR DRY

for 5 seconds. CONTROLS LOCKED glows. If you press
any pad while your dishwasher is locked, the light flashes
3 times.

Washing
WASHING glows at the start of the first fill of any cycle
(except Rinse Only) and remains on until the end of the
main wash.

Water Heating
WATER HEATING glows whenever water is heated during
a cycle. Wash or rinse action continues as the water heats.

Rinsing

To unlock the controls
Press and hold AIR DRY for 5 seconds until the light turns
off.
NOTE: The dishwasher door can be opened while the
controls are locked.

Drying System
During drying, you can see steam escaping through the
vent at the upper left corner of the door. This is normal as
the heat dries your dishes.

RINSING glows during the last two rinses of all cycles.

Drying
DRYING glows during the drying portion of each cycle
(even if you select Air Dry). The indicator turns off at the
end of the cycle.

Clean
CLEAN glows when a cycle is finished. The light turns off
when you open the door, press Cancel/Drain, or press
another cycle or option.

Controls Locked
Lock the controls to prevent your dishwasher from
accidentally being turned on. Use the Lock feature, also, to
prevent accidental cycle or option changes during a cycle.
When CONTROLS LOCKED is lit, all buttons are disabled.
You can lock the dishwasher while the dishwasher is
running.

IMPORTANT: The vapor is hot. Do not touch the vent
during drying.

Overfill Protection Float
The overfill protector (in the front right corner of the
dishwasher tub) keeps the dishwasher from overfilling. It
must be in place for the dishwasher to operate.

Check under the float for objects that may keep the
protector from moving up or down.

14

WASHING SPECIAL
ITEMS
If you have doubts about washing a particular item, check
with the manufacturer to see if it is dishwasher safe.
MATERIAL

DISHWASHER SAFE?/COMMENTS

Aluminum

Yes

MATERIAL

DISHWASHER SAFE?/COMMENTS

Pewter, Brass,
Bronze

No

Disposable
Plastics

No

Plastics

Yes

High water temperature and
detergents can affect finish of
anodized aluminum.
Disposable
Aluminum

Bottles and
Cans

Cast Iron

Stainless Steel

Sterling Silver
or Silver Plate

Yes

Tin

No

No
Seasoning will be removed and iron
will rust.

China/
Stoneware

Crystal

Yes
Always check manufacturer’s
recommendations before washing.
Antique, hand-painted, or over-theglaze patterns may fade. Gold leaf
can discolor or fade.
Yes

Yes
Run a rinse cycle if not washing
immediately. Prolonged contact with
food containing salt, vinegar, milk
products, or fruit juice can damage
finish.

No
Wash bottles and cans by hand.
Labels attached with glue can loosen
and clog the spray arms or pump and
reduce washing performance.

Cannot withstand high water
temperatures and detergents.

Always check manufacturer’s
recommendations before washing.
Plastics vary in their capacity to
withstand high water temperatures
and detergents. Load plastics in top
rack only.

No
Do not wash throwaway aluminum
pans in the dishwasher. These might
shift during washing and transfer
black marks to dishes and other
items.

High water temperatures and
detergent can discolor or pit the
finish.

Run a rinse cycle if not washing
immediately. Prolonged contact with
food containing salt, acid, or sulfide
(eggs, mayonnaise, and seafood) can
damage finish.

Can rust.
Wooden Ware

No
Wash by hand. Always check
manufacturer’s instructions before
washing. Untreated wood can warp,
crack, or lose its finish.

Check manufacturer’s
recommendations before washing.
Some types of leaded crystal can
etch with repeated washing.
Gold

No
Gold-colored flatware will discolor.

Glass

Yes
Milk glass yellows with repeated
dishwasher washing.

Hollow-Handle
Knives

No
Handles of some knives are attached
to the blade with adhesives which
can loosen if washed in the
dishwasher.

15

CARING FOR YOUR
DISHWASHER
Cleaning Your Dishwasher

Drain Air Gap
Check the drain air gap anytime your dishwasher
isn’t draining well
Some state or local plumbing codes require the addition of
a drain air gap between a built-in dishwasher and the
home drain system. If a drain is clogged, the drain air gap
protects your dishwasher from water backing up into it.

Cleaning the exterior
In most cases, regular use of a soft, damp cloth or sponge
and a mild detergent is all that is necessary to keep the
outside of your dishwasher looking nice and clean.

The drain air gap is usually located on top of the sink or
countertop near the dishwasher. To order a drain air gap
contact your local dealer, or in the U.S.A., call the
Consumer Assistance Center and ask for Part Number
300096.

Cleaning the interior
Hard water minerals can cause a white film to build up on
the inside surfaces, especially just beneath the door area.
Do not clean the dishwasher interior until it has cooled.
Wear rubber gloves. Do not use any type of cleanser other
than dishwasher detergent because it may cause foaming
or sudsing.
To clean interior
Make a paste with powdered dishwasher detergent on a
damp sponge and clean.
OR
Use liquid automatic dishwasher detergent and clean with
a damp sponge.
OR
See the vinegar rinse procedure in “Spotting and filming on
dishes” in “Troubleshooting.”
NOTE: Run a normal wash cycle with detergent after
cleaning the interior.

16

NOTE: The drain air gap is an external plumbing device
that is not part of your dishwasher. The warranty provided
with your dishwasher does not cover service costs directly
associated with the cleaning or repair of the external drain
air gap.

To clean the drain air gap
Clean the drain air gap periodically to ensure proper
drainage of your dishwasher. Follow the cleaning
instructions provided by the manufacturer. With most
types, you lift off the chrome cover. Unscrew the plastic
cap. Then check for any soil buildup. Clean if necessary.

Storing Your Dishwasher
Storing for the summer
Protect your dishwasher during the summer months by
turning off the water supply and power supply to the
dishwasher.

Moving or winterizing your dishwasher

5. Remove the spring clamp from the water outlet and
separate from the water supply valve; drain water into
pan.
6. Reconnect both water inlet and water outlet to the
water supply valve.
7. Empty the pan and reposition it under the water pump.
8. Remove the clamp and disconnect the drain hose from
the water pump; drain water into pan.

Protect your dishwasher and home against water damage
due to freezing water lines. If your dishwasher is left in a
seasonal dwelling or could be exposed to near freezing
temperatures, have a qualified person do the following:

9. Reconnect drain hose to the water pump, being sure
to position the clamp over the connection.

1. Disconnect power supply to the dishwasher.

NOTE: If your dishwasher is connected to a garbage
disposal, do not run water into the sink after winterizing.
This could cause water to refill the drain hose on your
dishwasher.

2. Turn off water supply to the dishwasher.
3. Remove the 4 screws on the lower access panel.
Remove the lower access panel.

10. Replace the lower access panel.

Reconnecting your dishwasher
1. Remove the 4 screws on the lower access panel and
remove lower access panel.
2. Turn on the water supply to dishwasher.
3. Turn on power supply to dishwasher.
4. Run dishwasher through a complete cycle and check
for leaks.
5. Replace lower access panel.

4. Place a shallow pan under the water supply valve.
Then, use a wrench to disconnect the water inlet from
the water supply valve. Separate the water inlet from
the water supply valve and drain water into the pan.

1

2

3

4

5

6

1. Water outlet
2. Spring clamps
3. Water supply valve
4. Water inlet
5. Water pump and motor
6. Drain hose

17

TROUBLESHOOTING

Dishes are not completely clean
■

First try the solutions suggested here and
possibly avoid the cost of a service call...

Is the water temperature too low? If needed, turn home
water heater up to ensure water entering dishwasher is
at least 120°F (49°C). Refer to the “Dishwasher
Efficiency Tips” section.

Dishwasher is not operating properly
■

Dishwasher does not run or stops during a cycle
Is the door closed tightly and latched?

Did you use the correct amount of fresh detergent? Use
recommended dishwasher detergents only. Refer to the
“Detergent Dispenser” section. Never use less than one
tablespoon (15 g) per load. Detergent must be fresh to
be effective. Store detergent in a cool, dry area. Heavy
soil and/or hard water generally require extra detergent.

Is the right cycle selected? Refer to the “Cycle Selection
Chart.”
Is there power to the dishwasher? Has a household fuse
blown or circuit breaker tripped?

Is detergent caked in dispenser? Use fresh detergent
only. Do not allow detergent to sit for several hours in a
wet dispenser. Clean dispenser when caked detergent is
present.

Has the motor stopped due to an overload? The motor
automatically resets itself within a few minutes. If it does
not restart, call for service.
Is the water shut-off valve (if installed) turned on?
■

Dishwasher will not fill
Is the overfill protection float able to move up and down
freely? Press down to release.

■

Water remains in the dishwasher
Is the cycle complete?

■

Detergent remains in the covered section of the
dispenser
Is the cycle complete?

Is the pump or spray arm clogged by labels from bottles
and cans? Remove labels before washing bottles and
cans or wash by hand.
Is the home water pressure high enough for proper
dishwasher filling? Home water pressure should be 20
to 120 psi (138 to 828 kPa) for proper dishwasher fill. A
booster pump on the water supply can be added if
pressure is too low.
Are high suds slowing the wash arm? Never use soap or
laundry detergents. Use recommended dishwasher
detergents only.

Is the detergent lump-free? Replace detergent if
necessary.
Is the bottom rack installed properly with the bumpers in
the front? Refer to the “Parts and Features” section.
Reinstall the rack if necessary.
■

White residue on the front of the access panel
Was too much detergent used? Refer to the “Detergent
Dispenser” section.
Is the brand of detergent making excess foam? Try a
different brand to reduce foaming and eliminate buildup.

■

Odor in the dishwasher
Are dishes washed only every 2 or 3 days? Run a rinse
cycle once or twice a day until you have a full load.
Does the dishwasher have a new plastic smell? Run a
vinegar rinse as described in “Spotting and filming on
dishes” later in this Troubleshooting guide.

■

Condensation on the kitchen counter (built-in
models)
Is the dishwasher aligned with the counter top? Moisture
from the vent in the dishwasher console can form on the
counter. Refer to the Installation Instructions for more
information.

18

Food soil left on the dishes
Is the dishwasher loaded correctly? Refer to the
“Loading Your Dishwasher” section.

■

Dishwasher door will not close
Is the bottom rack in backwards? The rack bumpers
must face the dishwasher door.

■

Brown stains on dishes and dishwasher interior
Does your water have high iron content? Rewash dishes
using 1-3 teaspoons (5-15 g) of citric acid crystals
added to the covered section of the detergent dispenser.
Do not use detergent. Follow with a Normal wash cycle
with detergent. If treatment is needed more often than
every other month, the installation of an iron removal
unit is recommended.

■

Black or gray marks on dishes
Are aluminum items rubbing dishes during washing?
Disposable aluminum items can break down in the
dishwasher and cause marking. Hand wash these items.
Remove aluminum markings by using a mild abrasive
cleaner.

■

Orange stains on plastic dishes or dishwasher
interior
Are large amounts of tomato-based foods on dishes
placed in the dishwasher? Stains can gradually fade
over time. Regular use of heated drying will slow fading.
Stains will not affect dishwasher performance. Regular
use of a rinse cycle and an air-dry or energy-saving dry
option will reduce the likelihood of staining.

Spots and stains on dishes
■

Spotting and filming on dishes
Is your water hard or is there a high mineral content in
your water? Conditioning the final rinse water with a
liquid rinse aid helps eliminate spotting and filming.
Keep the rinse aid dispenser filled.
Is the water temperature too low? If needed, turn home
water heater up to ensure water entering dishwasher is
at least 120°F (49°C). Refer to the “Dishwasher
Efficiency Tips” section.
Did you use the correct amount of effective detergent?
Use recommended dishwasher detergents only. Refer to
the “Detergent Dispenser” section. Never use less than
1 tablespoon (15 g) per load. Detergent must be fresh to
be effective. Store detergent in a cool, dry area. Heavy
soil and/or hard water generally require extra detergent.
Is the home water pressure high enough for proper
dishwasher filling? Home water pressure should be 20
to 120 psi (138 to 828 kPa) for proper dishwasher fill. A
booster pump on the water supply can be added if
pressure is too low.
NOTE: To remove spots and film from dishes, try a white
vinegar rinse. This procedure is intended for occasional
use only. Vinegar is an acid and using it too often could
damage your dishwasher.

Dishes do not dry completely
■

1. Wash and rinse dishes. Use an air-dry or an energy
saving dry option. Remove all silverware or metal
items.

Are the plastics wet? Plastics often need towel drying.

2. Put 2 cups (473 mL) white vinegar in a glass or
dishwasher-safe measuring cup on the bottom rack.

Is the rinse aid dispenser empty? Refer to the “Rinse Aid
Dispenser” section.

3. Run the dishwasher through a complete washing
cycle using an air-dry or an energy saving dry option.
Do not use detergent. Vinegar will mix with the wash
water.
■

Silica film or etching (silica film is a milky, rainbowcolored deposit; etching is a cloudy film)
Sometimes there is a water/chemical reaction with
certain types of glassware. This is usually caused by
some combination of soft or softened water, alkaline
washing solutions, insufficient rinsing, overloading the
dishwasher, and the heat of drying. It might not be
possible to prevent the problem, except by hand
washing.
To slow this process use a minimum amount of
detergent but not less than 1 tablespoon (15 g) per load.
Use a liquid rinse aid and underload the dishwasher to
allow thorough rinsing. Silica film and etching are
permanent and cannot be removed. Do not use heated
drying.

■

Dishes are not dry
Did you load your dishwasher to allow proper water
drainage? Do not overload. Refer to the “Loading Your
Dishwasher” section. Use a liquid rinse aid to speed
drying.

Did you use an air-dry or energy-saving dry option? Use
a heated drying option for dryer dishes.

Dishes are damaged during a cycle
■

Chipping of dishes
Did you load the dishwasher properly? Load the dishes
and glasses so they are stable and do not strike together
from washing action. Minimize chipping by moving the
rack in and out slowly.
NOTE: Antiques, feather-edged crystal, and similar
types of china and glassware might be too delicate for
automatic dishwashing. Wash by hand.

White spots on cookware with non-stick finish
Has the dishwasher detergent removed cookware
seasoning? Reseason cookware after washing in the
dishwasher.

19

ASSISTANCE
OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service
call. If you still need help, follow the instructions below.
When calling, please know the purchase date and the
complete model and serial number of your appliance. This
information will help us to better respond to your request.

If you need replacement parts
If you need to order replacement parts, we recommend
that you only use Factory Specified Parts. Factory
Specified Parts will fit right and work right, because they
are made with the same precision used to build every new
Kirkland Signature™ appliance by Whirlpool Corporation.
To locate Factory Specified Parts in your area, call our
Consumer Assistance Center telephone number or your
nearest designated service center.
Call the Whirlpool Consumer Assistance Center
toll free: 1-800-253-1301.
Our consultants provide assistance with:
■

Features and specifications on our full line of
appliances.

■

Installation information.

■

Use and maintenance procedures.

■

Accessory and repair parts sales.

■

Specialized customer assistance (Spanish speaking,
hearing impaired, limited vision, etc.).

■

Referrals to local dealers, repair parts distributors, and
service companies. Whirlpool designated service
technicians are trained to fulfill the product warranty
and provide after-warranty service, anywhere in the
United States.
To locate the Whirlpool designated service company in
your area, you can also look in your telephone directory
Yellow Pages.

For further assistance
If you need further assistance, you can write to Whirlpool
with any questions or concerns at:
Whirlpool Brand Home Appliances
Consumer Assistance Center
c/o Correspondence Dept.
2000 North M-63
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your
correspondence.

20

NOTES

21

NOTES

22

NOTES

23

DISHWASHER WARRANTY
TM

TWO-YEAR FULL WARRANTY
For two years from the date of installation, when this dishwasher is operated and maintained according to instructions attached to or
furnished with the product, Whirlpool will pay for Factory Specified Parts replacement parts and repair labor to correct defects in
materials or workmanship. Service must be provided by a Whirlpool designated service company.

THIRD THROUGH FIFTH YEAR LIMITED WARRANTY
For the third through fifth year from the date of installation, when this dishwasher is operated and maintained according to instructions
attached to or furnished with the product, Whirlpool will pay for Factory Specified Parts replacement parts for the following components
if defective in materials or workmanship: the electronic controls.

TWENTY YEAR FULL WARRANTY
For twenty years from the date of installation, Whirlpool will pay for replacement parts and repair labor for the tub or inner door if either
develops a water leak resulting from defective materials or workmanship. Service must be provided by a Whirlpool designated service
company.

Whirlpool Corporation will not pay for:
1. Service calls to correct the installation of your dishwasher, to instruct you how to use your dishwasher, to replace house fuses or to
correct house wiring or plumbing.
2. Repairs when your dishwasher is used in other than normal, single-family household use.
3. Damage resulting from accident, alteration, misuse, abuse, fire, floods, acts of God, improper installation, or installation not in
accordance with local electrical and plumbing codes.
4. Any labor costs during the limited warranty.
5. Replacement parts or repair labor costs for units operated outside the United States.
6. Pickup and delivery. This product is designed to be repaired in the home.
7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

THIS KIRKLAND SIGNATURETM APPLIANCE IS
WARRANTED BY WHIRLPOOL CORPORATION IN THE
UNITED STATES. WHIRLPOOL DOES NOT ASSUME
ANY RESPONSIBILITY FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental
or consequential damages, so this exclusion or limitation may not
apply to you. This warranty gives you specific legal rights and you
may also have other rights which may vary from state to state.

Outside the United States, a different warranty may
apply. For details, please contact Whirlpool
Corporation.
If you need service, first see “Troubleshooting.” Additional help
can be found by checking “Assistance or Service,” or calling our
Consumer Assistance Center at 1-800-253-1301, from anywhere
in the U.S.A. or write: Whirlpool Corporation, Consumer
Assistance Center, c/o Correspondence Dept., 2000 North M-63,
Benton Harbor, MI 49022-2692.
1/99

Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your dishwasher to
better help you obtain assistance or service if you ever need it.
You will need to know your complete model number and serial
number. You can find this information on the model and serial
number label/plate, located on your appliance as shown in “Parts
and Features.”

Dealer name _________________________________________
Address ____________________________________________
Phone number _______________________________________
Model number _______________________________________
Serial number _______________________________________
Purchase date _______________________________________

DISTRIBUTED BY:
CWC, P.O. BOX 34535
SEATTLE, WA 98124-1535
1-800-774-2678 U.S.

8051560
© 1999 Whirlpool Corporation

TM Kirkland Signature is a Trademark of Costco Wholesale Corporation

1/99
Printed in U.S.A.



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 1999:01:22 16:37:10
Producer                        : Acrobat Distiller 3.01 for Windows
Author                          : KWalker
Creator                         : ADOBEPS4.DRV Version 4.10
Title                           : 8051560.book
Modify Date                     : 2002:06:17 16:00:07
Page Count                      : 24
EXIF Metadata provided by EXIF.tools

Navigation menu