Kitchenaid KEWD105HBL05 User Manual WARMING DRAWER Manuals And Guides L0523331

KITCHENAID Warming Drawer Manual L0523331 KITCHENAID Warming Drawer Owner's Manual, KITCHENAID Warming Drawer installation guides

User Manual: Kitchenaid KEWD105HBL05 KEWD105HBL05 KITCHENAID WARMING DRAWER - Manuals and Guides View the owners manual for your KITCHENAID WARMING DRAWER #KEWD105HBL05. Home:Kitchen Appliance Parts:Kitchenaid Parts:Kitchenaid WARMING DRAWER Manual

Open the PDF directly: View PDF .
Page Count: 6

[] []

Questions regarding features, operation,

performance, parts or service? Call

1o800o461o5681or visit our web site at

www. kitchenaid.com/ca nada.

I(itchen_kid _

FORTHE WAY IT'S MADE _°

Call when you:

[] Have questions about warming oven

installation or operation.

[] Need to obtain the name and number

of an authorized service

company.

When you call, you will need:

[] The warming oven model number.

[] The warming oven serial number.

Both numbers are listed on the

model/serial rating plate, located on the

upper left front corner of the oven cavity.

www.kitchenaid.comlcanada 1-800.461-8681

Readand sa e these

IMPORTANT:

Installer: Leave installation

Instructions with the homeowner.

Homeowner: Keep Installation

Instructions for future reference.

Save Installation Instructions for local

electrical inspector's use.

Write down the model and serial numbers

before installing warming oven.

Both numbers are on the model/serial

rating plate, located on the upper left front

corner of the oven cavity.

Model #

Serial # Part No. 8300561

Before you start,,,

Your safety and the safety of

others are very important,

We have provided many important

safety messages in this manual and

on your appliance. Always read and

obey all safety messages.

This is the safety alert

symbol.

This symbol alerts you to

potential hazards that can kill or hurt

you and others.

All safety messages will follow the

safety alert symbol and either the

word "DANGER" or "WARNING".

These words mean:

You can be killed or seriousJy

injured if you don't immediately

follow instructions.

You can be killed or seriously

injured if you don't follow

instructions.

All safety messages will tell you

what the potential hazard is, tell you

how to reduce the chance of injury,

and tell you what can happen if the

instructions are not followed.

important: Observe aJJ governing

codes and ordinances,

Proper installation is your responsibility.

Have a qualified technician install this

oven,

Oven location should be away from

strong draft areas, such as windows,

doors and strong heating vents.

Cabinet opening dimensions that are

shown must be used. Given dimensions

provide minimum ciearance.

Recessed installation area must provide

complete enclosure around the recessed

portion of the oven.

Electrical ground is required. See

"Electrical requirements."

Electrical supply outlet should be

located in the rear wall on the lower right

side of the cutout or in an adjacent

cabinet. The outlet must be recessed. If

the electrical outlet is located in an

adjacent cabinet, provide a 1o3/8"dia.

minimum power supply cord plug

clearance hole in the back of the cutout or

support surface.

Oven support surface MUST be solid,

level and flush with bottom of cabinet

cutout.

There is no provision to level the oven

after it has been installed, If the

installation is not level, the door may

slide open or not seal tightly allowing

heat to escape resulting in poor oven

performance.

It is the customer's responsibility:

To contact a qualified electrical installer,

To assure that the electrical installation is

adequate and in conformance with

National Electrical Code, ANSI/NFPA 70

E latest edition*, or CSA Standards

022.1-94, Canadian Electrical Code, Part 1

and 622 No, 0-M91 E latest edition** and

all local codes and ordinances,

Copies of the standards listed may be obtained

from:

* NationaJ Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

e* Canadian Electrical Association

178 Rexdale BouJevard

Etobicoke {Toronto), Ontario MSW 1R3

Toolsneededfor Partssupplied:

Phillips

screwdriver

/

10=1/4"

(26po)

overall

height

2_

Overall Recessed

Oven Size Width Width

27" 26=3/4" 25=1/4"

(68.6 cm) (67.9 cm) (64.1 cm)

30" 29=%4" 28=1/4"

(76.2 cm) (75.6 cm) (71.8 cm)

Cutoutgimensions

12g=volt

g

(or located in

adjacent cabinet)

Warming

Single oven

cutout

\\

Warming --

oven front

22=3/4" L

57.8cm)

recessed

oven depth

24" (61 cm)

rain. cutout

depth

Support surface moat

be a01id, level, and

flush with bottom of

cabinet cutout.

Oven Size

27" 25=1/2" 27"

(68,6 cm) 64=8 cm) (68,6 cm)

30" 28-1/2" 30"

(76,2 cm) (72,4 cm) (76,2 cm)

Warming oven can be installed as a

single or double installation or

installed under a single oven, Two

warming ovens under a singJe oven

are shown.

Electrical 8hock Hazard

Plug into agrounded 3-prong outtet.

Do not remove ground prong.

Do not use an adapter,

Do not use an extension cord.

Failure to follow these instructions can

result in death, fire, or electrical shock.

Important: Observe all governing

codes and ordinances.

tt is the customer's responsibility:

To contact a qualified electrical

installer,

To assure that the electrical

installation is adequate and in

conformance with Nationat Electrical

Code, ANSflNFPA 70 -- latest edition*

or CSA Standards 022,1-94, Canadian

Electrical Coda, Part 1 and 022 No, 0°M91

Elatest edition**, and at1 Iocat codes

and ordinances.

You must have:

[_ 120-volt, 60Hz, AC-only, 15- or 20-

amp., fused electrical supply.

[_ outlet located in the cabinet as close

as possible to the warming oven.

We recommend:

[_ a time-delay fuse or circuit breaker.

[_ a separate circuit serving this

appliance only.

tf codes permit and a separate ground

wire is used, it is recommended that a

qualified electrician determine that the

ground path is adequate.

Copies of the standards listed may be obtained

from:

* National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

*_ Canadian Electrical Association

178 Rexdate Boulevard

Etobicoke (Toronto}, Ontario MgW 1R3

3-prong

ground plug

ground prong

3=proeg

FigUr8 1 gr0oed4ype

outlet

For your personal safety, this appliance

must be grounded. This appliance is

equipped with a power supply cord

having 3-prong ground plug. To minimize

possible shock hazard, the cord must be

plugged into a mating 3-prong ground-

type outlet, grounded in accordance with

local codes and ordinances. See

Figure 1. if a mating outlet is not

available, it is the personal responsibility

and obligation of the customer to have a

properly grounded 3-prong outlet installed

by a qualified electrician.

Warning -- improper connection of the

equipment-grounding conductor can

result in a risk of electric shock. Check

with a qualified electrician or serviceman

if you are in doubt as to whether the

appliance is properly grounded. Do not

modify the plug provided with the

appliance - if it will not fit the outlet, have

a proper outlet installed by a qualified

electrician.

ExcessiveWeightHazard

Usetwoormorepeopleto move and

install oven,

Failure to do so can result in back or

other injury.

_mportant:Use both hands to removeoven

drawer,

DoNotusehandleordrawerslidesfor

lifting.

m Carefully support the oven in front

of the cutout. Make sure the power to the

outlet is turned off and that the warming

oven power switch is set to the "OFF"

position.

o Plug the power supply cord into the

grounded outlet.

o Slide the oven into the cutout.

o Carefully push against the seal area of

the oven front frame and slide the oven

completely into the cabinet until the

front frame is positioned flush against

the cabinet face.

Refer to the "Use and Care

Guide," turn the oven on and check the

oven's operation.

m Turn power supply off. Move oven

close to final position.

• Remove and discard shipping materials,

tape and protective film from the oven.

o Remove and set aside racks and other

parts from inside oven.

Remove the drawer:

o Pull drawer to its full open position.

\'_ 2 sGrews_

Use two (2) screws provided to

secure the warming oven frame to the

cabinet.

o Press tab down on right and lift tab

upward on left, then slide drawer out

about 1 inch.

o Carefully remove the drawer from the

slides holding on to the sides, not the

drawer front.

• Set drawer aside on protected surface.

m Replace the drawer:

o Align the drawer guides with the

receiving slides.

o Push drawer in completely. Gently open

and close drawer to ensure it is seated

properly on the slides.

If warmJn9oven If you need

does not operate: serwce:

[_ Check that the circuit breaker is not

tripped or the house fuse blown.

[_ Check that the power supply cord is

plugged into the outlet.

If you need

tf you have questions about operating,

cleaning or maintaining your oven:

[_ Refer to Use and Care Guide.

[_ Call the Consumer Assistance Center:

Check your Use and Care Guide for a

toll4ree number to call or call the

dealer from whom you purchased this

appliance. The dealer is listed in the

Yellow Pages of your phone directory

under "Appliances -- Household --

Major -- Service and Repair."

Maintain the quality built into your oven by

calling an authorized service company.

To obtain the name and number of an

authorized service company:

[_ Contact the dealer from whom you

purchased your ovenl or

[_ Look in the Yellow Pages of your

telephone directory under "Appliances

-- Household -- Major -- Service and

Repair" for an authorized service

companyl or

[_ Call the Consumer Assistance Center.

The toll4ree number is listed in your

Use and Care Guide.

When you call, you will need:

[_ The oven model number.

[_ The oven serial number.

Both numbers are listed on the

model/serial rating plate, located on the

upper left front of the oven cavity.