Kitchenaid KHMS2056SSS4 User Manual MICROWAVE HOOD COMBO 2.0 CUBIC FEET Manuals And Guides 1301158L

User Manual: Kitchenaid KHMS2056SSS4 KHMS2056SSS4 KITCHENAID MICROWAVE HOOD COMBO 2.0 CUBIC FEET - Manuals and Guides View the owners manual for your KITCHENAID MICROWAVE HOOD COMBO 2.0 CUBIC FEET #KHMS2056SSS4. Home:Kitchen Appliance Parts:Kitchenaid Parts:Kitchenaid MICROWAVE HOOD COMBO 2.0 CUBIC FEET Manual

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

MICROWAVE
HOOD COMBINATION
INSTALLATION
INSTRUCTIONS
This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See "Installation
Requirements" section for further notes.
These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration in
these installation instructions.

Table of Contents
MICROWAVE HOOD COMBINATION SAFETY..............................1
INSTALLATION REQUIREMENTS...................................................2
Tools and Parts...............................................................................
2
Location Requirements...................................................................
2
Product Dimensions .......................................................................
3
Electrical Requirements..................................................................
3
INSTALLATION INSTRUCTIONS.....................................................4
Remove Mounting Plate.................................................................
4
Convert Microwave Oven to ExternalVenting ...............................4
Locate Wall Stud(s).........................................................................
6
Mark RearWall................................................................................
7
Drill Holes in RearWall....................................................................
7
Attach Mounting Plate to Wall........................................................8
Prepare Upper Cabinet...................................................................
8
Install the Microwave Oven ............................................................
9
Install Filters..................................................................................
10
Complete Installation....................................................................10
VENTING DESIGN SPECIFICATIONS............................................11
ASSISTANCE ...................................................................................
12
Replacement Parts .......................................................................12

MICROWAVE

HOOD

COMBINATION

SAFETY

Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

W10502372A

INSTALLATION
The microwave oven is set for recirculation

"7...... _._a_S(_ ¸_

installation. For external (wall or roof) venting, see "Venting Design Specifications"

•

Measuring tape

•

Stud finder

•

Pencil

•

•
•

Masking tape or thumbtacks
Scissors

7/16" socket wrench
(or box wrench) for 1/4" x 2"
lag screws

•

T10 TORX ®tscrewdriver

•

No. 3 Phillips screwdriver
1/4-20 x 3" bolts

•

Drill

•

3/16" (5 mm) and 3/8"
(10 mm) drill bits

•

3/4" (19 mm) hole saw

•

Diagonal cutting pliers

Materials
•

for

section.

"

Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.

•

REQUIREMENTS

Check the opening where the microwave oven will be installed.
The location must provide:
•
Minimum installation dimensions. See "Installation
Dimensions" illustration.
Minimum one 2" x 4" (50.8 x 101.6 mm) wood wall stud and
minimum 3/8" (10 mm) thickness drywall or plaster/lath within
cabinet opening.
Support for weight of 150 Ibs (68 kg), which includes
microwave oven and items placed inside the microwave oven
and upper cabinet.

11/2'' (3.8 cm) diam. hole drill
bit for wood or metal
cabinet

Grounded electrical outlet inside upper cabinet. See
"Electrical Requirements" section.

•

Keyhole saw

NOTES:

•

Caulking gun and
weatherproof caulking
compound

•

•

Duct tape

Some cabinet and building materials are not designed to
withstand the heat produced by the microwave oven for
cooking. Check with your builder or cabinet supplier to make
sure that the materials used will not discolor, delaminate or
sustain other damages.

needed

Standard fittings for wall or roof venting. See "Venting Design
Specifications" section.

Parts Supplied
For information on reordering, see "Replacement Parts" section.
NOTE: The hardware items listed here are for wood studs. For
other types of wall structures, be sure to use appropriate
fasteners.

F£

A

If installing the microwave oven near a left sidewall, make sure
there is at least 3" (7.6 cm) of clearance between the wall and
the microwave oven, so that the door can open fully.

For gas cooktop, we recommend that combined cooking
surface rating does not exceed 55,000 BTU/hr.
The microwave oven is set for recirculation mode. For external
(wall or roof) venting, see "Venting Design Specifications"
section.

Special Requirements
For Wall Venting Installation Only:
•
Cutout must be free of any obstructions so that the vent fits
properly, and the damper blade opens freely and fully.
For Roof Venting Installation Only:
•
If you are using a rectangular to round transition piece,
3" (7.6 cm) clearance needs to exist above the microwave
oven so that the damper blade can open freely and fully. See
"Rectangular to Round Transition" illustration in "Venting
Design Specifications" section.

H

Dimension Requirements

A. 1/4-20 x 3" round-head bolts (2)
B. 1/4-20 x 3" flat-head bolts (2)
C. Washers (2)
D. Toggle nuts (2)
E. 1/4" x 2" lag screws (2)
F. Mounting screws (3)
G. Power supply cord bushing (1)
H. Damper assembly (for wall or roof
venting)
I. Vent deflector (for wall or roof
venting)

Not Shown:
Upper cabinet template
Wall template
Mounting plate
Aluminum grease filters
Charcoal filters (Depending
on model, charcoal filters
may not be included. See
Use and Care Guide.)

NOTE: Depending on model, aluminum grease filter and charcoal
filter may be combined.

1-®TORX is a registered trademark

2

of Saturn Fasteners,

Inc.

For proper ventilation, the vent
screen must be free and clear of the
surrounding cabinetry. The maximum
allowable upper cabinet and side
cabinet depth (from rear wall to front
of cabinetry) must be no greater than
the depth of the microwave oven
metal outer wrapper (from back of
microwave oven to the vent screen).
NOTE: If the upper cabinet is deeper
than the maximum allowable depth
(see "Installation Dimensions" in this
section), then the installer must
space the microwave oven forward
so that the vent screen is free and
clear of any surrounding cabinetry.

A. Microwave oven metal
outer wrapper
B. Vent screen

Installation Dimensions
NOTE: The grounded 3 prong outlet must be inside the upper
cabinet. See "Electrical Requirements" section.
A

k

B

i
ii
ii

!

12" (30.5 cra) rain.
13" (33.0 cra) max.
upper cabinet and
iside cabinet depth

Electrical

L[........................

Shock Hazard

33"

"

Plug into a grounded

(83.8 cra)

3 prong outlet.

typicaP

Do not remove ground

prong.

Do not use an adapter.
Do not use an extension

59"

..............

................

J

z:

X_----

:::=

.......

cord.

Failure to follow these instructions
fire, or electrical shock.

:_:;

:_::

:='_

can result in death,

-%

Observe all governing codes and ordinances.
Required:
•
A 120 volt, 60 Hz, AC only, 15- or 20-amp electrical supply
with a fuse or circuit breaker.

iii

Recommended:

B. Grounded 3 prong outlet

*33" (83.8 cm) is typical for 69" (175.3 cm) installation height.
Exact dimension may vary depending on type of range/cooktop
below.
/

fuse or time-delay

circuit breaker.

•

A separate circuit serving only this microwave oven.

[] For all cord connected appliances:
The microwave oven must be grounded. In the event of
an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric
current. The microwave oven is equipped with a cord
having a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly installed
and grounded.

WARNING:

Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions are
not completely understood, or if doubt exists as to whether
the microwave oven is properly grounded.

- 35 7/8" (91.1 cm)

T

1

A time-delay

GROUNDING iNSTRUCTiONS

A. 2" x 4" wall stud

181/4"
(46.4 cra)

•

( "ra,

Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician or serviceman install
an outlet near the microwave oven.

SAVE THESE iNSTRUCTiONS
NOTE: The power source for this microwave oven is an inverter,
and is incompatible with household inverter power supplies.

INSTALLATION

INSTRUCTIONS
2.

With vent deflector oriented as shown (wide side down), slide
it back and under the back edge of the vent opening.

Depending on your model, the mounting plate may be in the foam
packaging, or it may be attached to the back of the microwave
oven.
NOTE: To avoid possible damage to the work surface, cover the
work surface.
1.
2.

A

B

Remove any remaining contents from the microwave oven
cavity.
If the mounting plate is attached to the back of the microwave
oven, remove it and set it aside.

3.

Tape the microwave oven door closed so that door does not
swing open while the microwave oven is being handled.
NOTE: To avoid damage to the microwave oven, do not grip or
use the door or door handle while the microwave oven is being
handled.
A. Vent opening
B. Vent deflector
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 12
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Fri Jan 18 04:14:49 2013
Author                          : 
Title                           : 
Subject                         : 

EXIF Metadata provided by EXIF.tools