Klipsch CS700 DVD Part for Audio/Video System User Manual new

Download:
Mirror Download [FCC.gov]
Document ID	952640
Application ID	lCfWDEafjhtQq5Kl2AmhJg==
Document Description	Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	165.59kB (2069854 bits)
Date Submitted	2008-06-06 00:00:00
Date Available	2008-06-06 00:00:00
Creation Date	2008-06-06 09:45:43
Producing Software	AFPL Ghostscript 8.54
Document Lastmod	2008-06-06 09:46:02
Document Title	User manual _new
Document Creator	FreePDF XP 3.20 - http://shbox.de
Document Author:	wakeyouw

CONNECTIONS page 5/6
STEP 5: Connect the Speakers
3,-;
:7,(2,9
90./;
:7,(2,9
>09,3,::
:<)>66-,9
2307:*/*65;9633,9
1. After you uncoil the speaker cable, connect one speaker to the RIGHT
(Red) connector on the back of your Klipsch system. This speaker will
be to your left when you are behind the system connecting, but it will
be on the right when you are facing the system. You can connect either
speaker to the LEFT or the RIGHT OUTPUT, you just need to place them
properly.
Speaker Setup Considerations
Front speakers typically sound best
when their tweeters are at approximately ear height for seated listeners.
If this isn’t possible, it is sometimes
beneficial to tilt the speaker down or
up slightly so that it is aimed into the
listening area.
•
If possible, position the speakers the same distance apart as they are
from the listening position.
•
Speakers should be pointed straight forward. Do not place the
speakers at an angle.
•
If you are putting speakers in a cabinet, on a rack or a table, try to
bring them out far enough so that they are at least flush with the
cabinet’s front edge.
•
When practical, arrange each speaker so that it is at somewhat
different distances from the floor, the wall behind it, and the wall
beside it. It can also help to have the left and right front speakers
at different distances from their nearest side walls. This staggering
helps smooth the bass range. Each speaker can be set on its bottom
or side. If you set them on the side and want to turn the Klipsch logo,
carefully pull the logo forward, turn and release it.
•
The subwoofer’s output will increase as it is moved closer to walls,
with maximum output when it is placed in a corner. If practical,
always place the subwoofer near a wall. Additionally, a subwoofer will
deliver the smoothest bass response when placed near a wall away
from openings, such as doors.
•
Naturally, there are exceptions to the rules, since no two rooms or
systems are exactly alike. Experiment with positioning to get the
best sound.
3. Rubber pads have been included in the Accessory box. These self
adhesive pads can be applied to the bottom of the speakers.
4. The CS-700 wirelessly transmits the subwoofer signal from the A/V
Center to the subwoofer. (If you wish to connect the subwoofer with a
standard RCA cable, simply connect one end of the cable to the black
“LFE” OUTPUT on the rear of the A/V Center and the other end to the
“LFE” INPUT on the rear of the subwoofer. Cable not included.)
5. Plug the power cord into the subwoofer and an AC outlet and turn the
subwoofer 65.
6. For best results, the antenna on the rear of the CS-700 A/V Center
should be pointed up.
Input and Output Jacks
Please see appendix I (page 28) for the basics on how input
and output jacks work with your Klipsch system.
:<)
•
2. Connect the other speaker to the LEFT (White) OUTPUT on the back of
the Klipsch system. The speaker connected to the LEFT OUTPUT will be
to your right when you are behind the system connecting, but it will be
on the left when you are facing the system.

;,3,=0:065
STEP 6: Connect other components (OPTIONAL)
=*9)HJR7HULS
057<;
9-05
6<;7<;
9-6<;
(<+06=0+,6:=0+,6
(
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2008:06:06 09:46:02-04:00
Create Date                     : 2008:06:06 09:45:43-04:00
Metadata Date                   : 2008:06:06 09:46:02-04:00
Creator Tool                    : FreePDF XP 3.20 - http://shbox.de
Format                          : application/pdf
Title                           : User manual _new
Creator                         : wakeyouw
Document ID                     : uuid:a5e644dd-32c0-4565-8d81-c8122cd0d7d2
Instance ID                     : uuid:2aa4abe1-a81a-4b9e-9d9c-e076c5b1cc15
Producer                        : AFPL Ghostscript 8.54
Page Count                      : 24
Author                          : wakeyouw

EXIF Metadata provided by EXIF.tools