Kobian Canada 8DTB38 TABLET PC User Manual
Kobian Canada Inc., TABLET PC
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2716081 |
| Application ID | OxvJOMZ6hqBgu0MxVnnInA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 53.21kB (665065 bits) |
| Date Submitted | 2015-08-16 00:00:00 |
| Date Available | 2015-08-16 00:00:00 |
| Creation Date | 2015-07-02 14:55:40 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2015-08-14 19:15:07 |
| Document Title | F15_022_8DTB38-8GB_Electron_QuickStartGuide_ENG.indd |
| Document Creator | Adobe InDesign CS6 (Macintosh) |
ELECTRON QUICK START GUIDE www.hipstreet.com Getting started Device Layout Camera Touch screen App Menu 01 Back Button Home Button Menu Button History Button Volume -/+ Buttons Headset Jack USB Port Volume Buttons Rear Camera Power Button Speaker 02 Reset Button Basic functions Charging / Power ON/OFF / Wi-Fi / Menu *You can access the full user manual for more information. Prior to using the device, fully charge the battery. The device has a built in battery that uses only the supplied charger to charge it. In order to prolong the service life of the product, use the device until the battery is depleted for the first two times before charging the battery again. To charge the battery, connect one end of the charger to your wall outlet. Plug the USB cable into the charger and the other end to the device’s DC jack. Note: When the device is not in use, be sure to turn it off to conserve the battery. 03 1. Press the Power button to power ON the device.To power ON the device, press and hold the Power button for a few seconds until the startup image appears on the screen. Slide the lock icon to unlock the tablet. 2. To Power OFF the tablet, press and hold the Power button for a few seconds, then a “Power OFF” dialog box will pop up. Select “OK” to power OFF your tablet. 3. When the tablet is already powered ON, tap the power button once to put the tablet in sleep mode. 4. When the tablet is in sleep mode, tap the Power button once to wake the tablet. Slide the lock icon to unlock the tablet. 04 Basic functions Charging / Power ON/OFF / Wi-Fi / Menu 1. Select the “Settings” icon from the Menu. 2. Slide the Wi-Fi switchto the “ON” position. ON 3. Select your Wi-Finetwork from the list. 4. Enter the required password. 5. Once connected, the Wi-Fi connectivity icon will be shown at the bottom-right side of the Home screen. 05 1. Menu From the Home Screen, select the apps menu icon in the top-right side of the home screen to access the app list. 2. Select the app you’d like to open. 3. Select the Back button to return to the previous screen; Select the Home button to return to the Home screen. 06 Personalize your device Email / Wallpaper / Connect 1. From the Menu, select “Email”. Email account: Email address: Password: Manual setup Next 2. Enter your Email address, password and tap “Next”. 3. Select which type of email account you are setting up and it’s complete settings. You will need to enter your user name, password, andserver information depending on the type of email account, or you can change the settings by tapping “Manual Setup”. Tap “Next” and select “OK” to accept the activation. 1. Press and hold on a blank spot on the Home Screen anda menu will show up. Select from pictures in your galleryor the pre-loaded live and standard wallpapers. Once selected, tap “Set Wallpaper”. Choose wallpaper from 07 Gallery Live wallpapers Wallpapers 1. Connect the supplied USB cable from yourtablet to an unused USB port on your computer. 2. Touch the “USB” icon on the top-left side on your tablet, and select “USB Connected”. 3. Touch “Turn on USB storage”. Turn on USB storage 4. Once connected successfully, select the “hipstreet” drive on your computer to view/edit/add/delete files on your device. 5. When finished, touch “Turn off USB storage”and disconnect the cable. 08 Turn off USB storage FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. device, NOTE 1: This equipment has been tested and found to comply with the limits for a Class ClassBCdigital digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Canadian ICES-003 and RSS-210 The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. CONTACT US If you encounter any difficulties with this product, please visit our website at www.hipstreet.com and review our support section or call us. Our representatives are ready to help you with any questions about your product. We can guide you through connections, first-time use, or any of the features. Just give us a call or send us an email. North America 1- 888-456-2426 UK 0800-051-8330 Netherlands 0800-404-0006 Germany 0800-180-7686 Monday through Friday: 8:30am – 5:00pm Email: support@hipstreet.com We want you to start enjoying your product right away! North America: 1 888 456 2426 UK: 0800 051 8330 Netherlands: 0800 404 0006 Germany: 0800 180 7686
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Create Date : 2015:07:02 14:55:40-04:00 Metadata Date : 2015:08:14 19:15:07+08:00 Modify Date : 2015:08:14 19:15:07+08:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:0e6adb45-b62b-453f-bf16-d6e72120804e Original Document ID : xmp.did:018011740720681188C6FE7713586538 Document ID : xmp.id:B06CC392252068118083B645112193F5 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:B07229DB0B2068118083B645112193F5 Derived From Document ID : xmp.did:FB7F117407206811822AD3A4666E0288 Derived From Original Document ID: xmp.did:018011740720681188C6FE7713586538 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2015:07:02 14:55:40-04:00 Format : application/pdf Title : F15_022_8DTB38-8GB_Electron_QuickStartGuide_ENG.indd Producer : Adobe PDF Library 10.0.1 Trapped : False GTS PDFX Version : PDF/X-1:2001 GTS PDFX Conformance : PDF/X-1a:2001 Slug Checksum : 357745129 Slug Post Script Name : DIN-Black Slug Foundry : FontShop International Slug Version : 001.000 Slug Outline File Size : 0 Slug Family : DIN Slug Font Sense 12 Checksum : 357745129 Slug Font Kind : OpenType - PS Slug Kerning Checksum : 0 Page Count : 12 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools