Kobian Canada HSIPN4KBCS Bluetooth Keyboard User Manual

Kobian Canada Inc., Bluetooth Keyboard

User manual

 BTKEYBOARDCASEFORIPHONE USER’SMANUAL Model:HSIPN4KBCS,HS-IPN5KBCS FCC ID:YH5HSIPN4KBCS
StepIPlaceYourIphoneintothecase  StepIIPair(Connect)YourIphonewiththeKeyboardNote:  ThisstepisonlyneededwhenyoufirstusethiskeyboardcaseTurnonyourIphoneandta p “setting”
Tap“General”Andfindthe“Bluetooth”option
SlidetheBluetoothbuttonto“On”andyourIphonewillstarttosearchBluetoothde v ic e s 
Youshouldturntheswitchinthekeyboardto“on”positionAndactivetheBluetoothbuttonwithalittlestick
ThentheBluetoothsignallightonthele f t topofthekeyboardwillbeonNow,yourIphonewillfindthisBluetoothkeyboard
Thenyoushouldtap“BluetoothKeyboard”option,thenabluewindowwithapasswordwillcomeoutEnterthepasswordontheBluetoothkeyboardthenpressthe“Enter”key,then
yourIphoneissuccessfullypaired(connected)withtheBluetoothkeyboardStepIIIStarttousethekeyboardYoucanwritemessage,notesandemailwiththiskeyboardinsteadofthe
touchingkeyboardonyourIphoneHowever,youcanpress“fn”+“thekeywithkeyboardsymbol”atthesametimetogetthetouchingkeyboardback. z Pressthe“Shift”keyatthesameifyouwanttotypethewhitesymbolsonthe
le ft topofsomekeysz Pressthe“fn”keyatthesametimeifyouwanttotypethebluesymbolsonthele ft topofsomeotherkeysTechnicalSpecificationOfTheProduct:Bluetooth Specification： Version 2.0 Operation Current： 3mA Standby Current: 0.2mA Operation Voltage： 3.7V Charging Voltage: 110-240V
Battery Type: 500mAh Lithium Battery Charging period： 4hours （For the first time, please charge for 12 hours） Duration of Charged battery: 45 days: TroubleShooting：IfyouareunabletoconnectthekeyboardtoyourIphone,pleasetrythefollowing:z Checkifthebatteryislow.Whenthebatteryislow,somekeyswillreactslowlyandevendon’twork.Then,youshouldchargethebattery.z Checkthepowerswitch,makesureitison.Whenitison,thepowerlightonthelefttopofthekeyboardwillflashfortwoseconds z RestarttheBluetoothswitch,makesureyourIphonecansearchthisdevicez Ensurethepasswordforpairingiscorrect.Caution:z Thecaseismadeofplastic,pleaseavoidanycorrosionandleaveitawayfromfire!z Pleaseoperateaccordingtotheinstructionintheuser’smanual,wewouldnotberesponsibleforanydamagecausedbyinappropriateoperation!
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this devidevice complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. BODY-WORN OPERATION: This device was tested for typical RIGHT-CHECK TOUCH operations with iphone4S . Third-party belt-clips, holsters and similar accessories containing metallic components shall not be used. For more information about RF exposure, please visit the FCC website at www.fcc.gov Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies: <ANSIC95.1> (1992) / <NCRP Report 86> (1986) / <ICIMIRP> (1996) Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1). Nevertheless, we recommend that you use a hands-free kit with your phone (such as an earpiece or headset) to avoid potential exposure to RF energy. The design of your phone complies with the FCC guidelines (and those standards). NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.
RF Exposure Information: FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for user is 1.549W/kg. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu