Kobian Canada HSWMS02 2.4G Wireless Mouse User Manual Mouse Instructions HS WMS02 OL indd
Kobian Canada Inc., 2.4G Wireless Mouse Mouse Instructions HS WMS02 OL indd
User's manual
![](/img.php?id=1853989&img=bg1.png)
![](/img.php?id=1853989&img=bg2.png)
FFO ON
![](/img.php?id=1853989&img=bg3.png)
FFO ON
![](/img.php?id=1853989&img=bg4.png)
FFO ON
Laptop
Desktop
![](/img.php?id=1853989&img=bg5.png)
![](/img.php?id=1853989&img=bg6.png)
FCC WARNING:
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply
with the limits for a Class C digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
5
![](/img.php?id=1853989&img=bg7.png)
IC Warning:
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may
cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful
communication.
This device complies with Canadian ICES-003 and RSS-210
6