Kodak Alaris AU7520 2T2R 802.11b/g/n +AC dongle User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2932170
Application ID	RBB2GhsKlrrS+oaSZEf3HA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	75.14kB (939297 bits)
Date Submitted	2016-03-16 00:00:00
Date Available	2016-03-17 00:00:00
Creation Date	2017-11-21 01:18:09
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-21 01:18:09
Document Title	Microsoft Word - AboCom's generic QIG _AU7520-ok.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ChristyFan

AU7520 Wireless Adapter Q u i c k I n s t a l l G u i d e
Windows XP/VISTA/WIN7 Installation
When the main screen appears, click Setup
to continue.
Click Next to continue.
Select Yes, I want to restart my
computer now and click Finish to
reboot your computer.
Insert the USB adapter into USB port of
your computer. The system will
automatically detect the new hardware.
Right click on the icon on system tray and
select Open Config Utility to open the
configuration tool.
Configuration Tool
General Tab
The General page displays the detail information
of current connection.
Profile Tab
Profile can book keeping your favorite wireless
setting among your home, office, and other public
hot spot. You may have multiple profiles, and
activate the correct one at your preference.
Available Network Tab
The Network page displays the information of
surrounding APs from last scan result. The tab
lists the information including SSID, Network type,
Channel, Wireless mode, Encryption and Signal.
Status Tab
This page displays the information of the wireless
card including, Manufacture, NDIS driver version,
MAC, data rate, associated channel and uptime.
Wi-Fi Protected Setup Tab
The primary goal of Wi-Fi Protected Setup (Wi-Fi
Simple Configuration) is to simply the security
setup and management of Wi-Fi NETWORKS.
The STAs as an Enrollee or external Registrar
supports the configuration setup using PIN
(Personal Identification Number) configuration or
PBC (Push Button Configuration) method through
an internal or external Registrar.
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or
transmitter except in accordance with FCC multi-transmitter product procedures.
IMPORTANT NOTE:
Federal Communication Commission (FCC) Radiation Exposure Statement
This EUT is compliant with SAR for general population/uncontrolled exposure limits in ANSI/IEEE
C95.1-1999 and has been tested in accordance with the measurement methods and procedures
specified in OET Bulletin 65 Supplement C.
IC Statement:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
other channels is not possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection
d'autres canaux n'est pas possible.
This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or
transmitter except in accordance with IC multi-transmitter product procedures.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou
transmetteur.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant
les mêmes canaux.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102
and had been tested in accordance with the measurement methods and procedures specified in
IEEE 1528.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : ChristyFan
Create Date                     : 2016:03:14 14:35:33+08:00
Modify Date                     : 2016:03:14 14:50:38+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:03:14 14:50:38+08:00
Format                          : application/pdf
Title                           : Microsoft Word - AboCom's generic QIG _AU7520-ok.doc
Creator                         : ChristyFan
Document ID                     : uuid:bf995443-0689-47f1-9a48-d6087796f15f
Instance ID                     : uuid:04d83175-b454-4d1d-b62d-a09ca203efc5
Page Count                      : 5

EXIF Metadata provided by EXIF.tools