Kodak Pixpro Fz 43 Users Manual

PixPro FZ-43 - User Manual fz43-en Free User Guide for Kodak Camera, Manual - page5

2015-08-19

: Kodak Kodak-Pixpro-Fz-43-Users-Manual-788120 kodak-pixpro-fz-43-users-manual-788120 kodak pdf

Open the PDF directly: View PDF .
Page Count: 84

BEFORE YOU START
SAFETY NOTES
CONTENTS
GETTING READY
MODE OVERVIEW
BASIC OPERATION
PLAYBACK
USING THE MENUS
CONNECTIONS
APPENDICES

User Manual

Declaration of Conformity

Responsible Party: JK Imaging, Ltd.

Address: JK Imaging, Ltd. 17239 South Main Street, Gardena, CA 90248, USA

JK Imaging Europe, 71 Clarendon road, Watford, WD17 1DS, UK

Company Website: www.kodakpixpro.com

For Customers in the U.S.A.

Tested to Comply with FCC Standards FOR HOME OR OFFICE USE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

For Customers in Europe

"CE" mark indicates that this product complies with the European requirements for safety, health, environment

and customer protection. "CE" marked cameras are intended for sales in Europe.

This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection of electrical waste and

electronic equipment in the European countries. Please do not throw the equipment into domestic refuse. Please

use the return and collection systems available in your country for proper, safe disposal of this product.

Packaging: Please follow local regulations for the recycling of packaging.

Batteries: Please dispose of used batteries at designated collection centers.

BEFORE YOU START

About this Manual

Thank you for purchasing this KODAK PIXPRO Digital Camera. Please read this manual carefully and keep it in a safe

place for future reference.

JK Imaging, Ltd. reserves all rights of this document. No part of this published manual may be reproduced, transmitted,

transcribed, stored in a retrieval system or translated into any language or computer language, in any form, by any

means, without the prior written permission of JK Imaging, Ltd..

All trademarks mentioned in this manual are used for identification purposes only and are properties of their

respective owners.

This manual provides you with instructions on how to use your new KODAK PIXPRO Digital Camera. Every

effort has been made to ensure that the contents of this manual are accurate; however JK Imaging, Ltd.

reserves the right to make changes without notice.

Throughout this manual, the following symbols are used to help you locate information quickly and easily:

Indicates useful information.

Indicates precautions are to be taken while operating the camera.

In introducing you how to operate this camera, the following symbols may appear to facilitate your understanding:

「Item properties」: The optional properties in the camera interface are indicated by the symbol「」.

SAFETY NOTES

Safety notes for this camera

Do not drop the camera or allow it to hit solid objects.

Do not attempt to disassemble or repair the camera.

Do not use or store the camera in dusty places or on

a beach to prevent dust or sand from entering the

camera, causing possible damage to it.

Do not use or store the camera in a hot environment

or under direct sunlight.

Do not use or store the camera near a powerful

magnetic field, for example near a magnet or

transformer.

Avoid touching the lens of the camera.

Do not expose the camera to direct sunlight for a long

period time.

To prevent the camera from being damaged by

moisture, do not use or store the camera in very

humid environments, such as in rain or near bodies of

water.

If water accidentally comes in contact with the

camera. turn the camera off, remove the battery and

the memory card, and dry it within 24 hours.

When you take the camera from a cold place to a

warmer environment, condensation may occur. Please

wait for a reasonable period of time before you turn it

on.

Before you remove the battery and memory card, the

camera should be turned off.

When you clean the body of the camera, don not use

abrasive, alcohol-based or organic cleaner.

Use a professional lens wiping cloth and dedicated

cleaner to wipe and clean the lens.

Download your photos and remove the memory card

when you are going to store the camera for a long

period of time.

If this camera is not in use for a long time, please keep

it in a dry and clean condition.

Our company will not pay compensation for any

failure of playback of pictures or videos caused by

improper operation.

Safety notes for battery

If battery fluid leaks inside the camera, contact our

customer service department. If the battery fluid

leaks onto your skin, rinse your skin with clean water

and seek immediate medical attention.

Disposal of used batteries should be carried out

in accordance with the local (national or regional)

regulations.

To prevent the battery from being damaged, do not

drop the battery or allow it to hit solid objects or to be

scratched by the objects.

Do not let the battery come in contact with metal

objects (including coins) to avoid short circuiting,

discharging, excessive heat, or possible leakage.

Do not attempt to disassemble the battery.

Do not expose the battery to water. Always keep the

battery contacts dry.

Do not heat the battery or throw it into a fire to avoid

a possible explosion.

Do not store the battery in a hot environment or in

direct sunlight.

When the camera is stored for a long period of time,

remove the battery and keep it in a dry place that is

not accessible to infants and children.

In a colder environment, the performance of the

battery could be noticeably reduced.

When you install the battery, install it according to

the positive and negative markings on the battery

compartment. Never force it into the battery

compartment.

Safety notes for memory card

We suggest buying only well-known, name brand

memory cards to ensure peak performance.

Format the memory card using the camera before you

use it or insert a new one.

Do not drop the memory card or allow it to hit solid

objects to avoid damaging it.

Do not attempt to disassemble or repair the memory

card.

Do not expose the memory card to water. Always

keep it dry.

Do not remove the memory card when the camera

is turned on. Otherwise, the memory card could be

damaged.

Do not directly edit the data on the memory card.

Copy the data to your PC before you edit them.

When the camera is stored for a long period of time,

be sure to download your photos and remove the

memory card. Store it in a dry environment.

Do not modify the name of the files or folders of the

memory card using your PC. Modifying the file names

may cause the files to not be recognized on the

camera or a possible error may occur.

A photo taken with the camera will be stored in the

folder that is automatically generated on the SD card.

Do not store photos that are not taken using this

camera in these folders as the pictures cannot be

recognized during the playback.

When you insert a memory card, make sure the notch

of the card matches the markings on the top of the

card slot.

Other Safety Notes

Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to

be written and the camera may not power on later.

When using your camera on an airplane, observe the relevant rules specified by the airline.

Due to the limitations of manufacturing technology, the LCD may have a few dead or bright pixels. These pixels do no

effect the quality or performance of the camera, photos or video.

Do not expose the LCD to water. In a humid environment, only wipe it with a soft and dry cleaning cloth.

If the LCD is damaged and the liquid crystal comes into contact with your skin, wipe your skin with a dry cloth

immediately and rinse it with clean water. If liquid crystal comes into contact with your eyes, wash them with clean

water at least for 15 minutes and seek immediate medical attention. If you accidentally swallow liquid crystal, rinse

your mouth immediately and seek medical attention.

BEFORE YOU START .......................................1

SAFETY NOTES ................................................3

CONTENTS ........................................................7

GETTING READY ........................................... 11

Accessories Included ................................................. 11

Part Names .................................................................. 12

Installing Battery and Memory Card ...................... 14

Turning Camera On and Off ..................................... 16

Set your Language, Date/Time ............................... 17

Set your Language, Date/Time after

the first power-on ............................................... 17

Resetting your Language ................................... 18

Resetting Date/Time ......................................... 19

MODE OVERVIEW ........................................ 20

Display Setting ............................................................ 20

LCD Display ................................................................. 21

Overview of the Screen Icons in

Photo Shooting Mode ........................................ 21

Overview of the Screen Icons in

Movie Mode......................................................... 22

Overview of the Screen Icons in

Playback Mode .................................................... 23

Using the Mode Button ............................................. 24

Manual Mode ............................................................. 25

Auto Mode .................................................................. 25

Panorama Mode ......................................................... 26

CONTENTS

Scene Mode ................................................................ 27

Auto Scene Mode ............................................... 29

BASIC OPERATION ........................................ 30

Flash Mode .................................................................. 30

Macro Mode ................................................................ 31

Self-timer Setting ....................................................... 32

EV Setting..................................................................... 33

Using the Zoom Function .......................................... 34

Using Quick Recording .............................................. 34

PLAYBACK ....................................................... 35

Viewing Photos and Videos ..................................... 35

Thumbnail View .......................................................... 36

Using Zoom Playback (for still pictures only) ...... 37

Slideshow ..................................................................... 38

Photos and Video Deletion ...................................... 39

USING THE MENUS ...................................... 40

Photo Setup Menu ..................................................... 40

Image Size ............................................................ 40

Cont. AF ................................................................ 41

Continuous Shot ................................................. 41

Focus Setting ....................................................... 42

Color Effect .......................................................... 42

White Balance Setting ....................................... 43

Scene ..................................................................... 43

Photo Shooting Setting Menu .................................. 45

Quality .................................................................. 45

AF Assist Beam ................................................... 46

Digital Zoom ........................................................ 46

Date Imprint ........................................................ 47

Quick Review ....................................................... 47

Movie Menu ................................................................ 48

Video Quality ....................................................... 48

Movie Setting Menu .................................................. 49

Digital Zoom ........................................................ 49

Playback Menu ........................................................... 50

Red-Eye Reduction ............................................. 51

Rotate .................................................................... 51

Playback Setting Menu.............................................. 52

Protect ................................................................... 53

Delete .................................................................... 53

DPOF (Digital Print Order Format) ................. 54

Trim ........................................................................ 54

Setup Menu ................................................................. 55

Sound Settings .................................................... 56

Power Saver ......................................................... 56

Language .............................................................. 57

World Time .......................................................... 57

Date & Time ......................................................... 57

File / Software ............................................................. 58

Format ................................................................... 58

Copy to Card ........................................................ 59

File Numbering .................................................... 60

Reset ...................................................................... 61

FW Version .......................................................... 62

CONNECTIONS .............................................. 63

Connecting to a Computer ....................................... 63

Setting the USB Mode ....................................... 63

Transferring files to your computer ................ 64

Video System .............................................................. 65

Connecting to a PictBridge Compatible Printer ... 66

Setting the USB Mode ....................................... 66

Connecting to your Printer ............................... 67

Using the PictBridge Menu ....................................... 68

Print (with Date) ................................................. 69

Print (without Date) ........................................... 70

Print Index ............................................................ 71

Print DPOF Images ............................................. 71

Exit ......................................................................... 72

APPENDICES ................................................... 73

Specifications .............................................................. 73

Prompts and Warning Messages ............................ 77

Troubleshooting ......................................................... 81

GETTING READY

Your camera box should contain the camera model you purchased along with the following accessories. If anything is

missing or appears to be damaged, please contact your retailer.

Accessories Included

AA Alkaline battery x 2 Wrist strap

Quick start guide

Micro USB cable

Service card

STOP

Quick Start Guide

Warranty card

Part Names

1 Flash lamp 6 Zoom button 11 Delete button/Arrow button (Down)

2AF assist beam/

Self-timer lamp 7 Indicator lamp 12 Macro button/Self-timer button/

Arrow button (Left)

3 Lens 8 Playback button 13 SET button

4 Microphone 9 Display button/Arrow button (Up) 14 Menu button

5LCD 10 Flash button/Arrow button (Right) 15 Mode button

16 Strap eyelet 19 Fast video recording button 22 Battery cover

17 Micro USB port 20 Power button 23 Tripod socket

18 Shutter button 21 Speaker

1. Open the battery cover. 2. Insert the battery into the battery slot in the correct

position as shown in the following diagram:

Installing Battery and Memory Card

4. Close the battery cover.3. Insert the memory card into the memory card slot as

shown in the diagram below:

Write protection buckle

A memory card (SD/SDHC) is optional and is not included in the product package. It needs to be purchased

separately. Please use an original memory card which is Class 4 or higher and has a capacity of 4GB to 32GB.

To remove your memory card, open the battery cover, gently press the memory card to eject it and remove it

carefully.

Press the power button to turn the camera on. To turn the camera off, press the power button again.

Press and hold the button to power on and enter Playback mode.

Power Button

Turning Camera On and Off

Set your Language, Date/Time

1. When you turn the camera on for the first time, the

language selection screen appears.

2. Press the arrow buttons to select your desired

language.

3. After you press the button to confirm the

selection, the Date/Time settings screen appears.

4. Press the left/right arrow buttons to select the Date/

Time to be adjusted: Time is displayed in yyyy:MM:dd

HH:mm.

5. Press the up/down arrow buttons to adjust the value

for the selected Date/Time.

6. Press the button to confirm the time settings and

the snapshot screen appears.

Set your Language, Date/Time after the first power-on

Resetting your Language

After you set your language for the first time, follow the

instructions below to reset your language.

1. Press the button, press the up/down arrow

buttons to select , and press the button to

enter the menu.

2. Press the up/down arrow buttons to select , and

press the button or right arrow button to enter the

menu.

3. Press the up/down arrow buttons to select

「Language」and press the button or right arrow

button to enter the menu.

4. Press the arrow buttons to select your desired

language and press the button to confirm.

5. Press the button and the snapshot screen

appears.

Resetting Date/Time

After you set your Date/Time for the first time, follow

the instructions below to reset date and time.

1. Press the button, press the up/down arrow

buttons to select , and press the button to

enter the menu.

2. Press the up/down arrow buttons to select , and

press the button or right arrow button to enter the

menu.

3. Press the up/down arrow buttons to select 「Date &

Time」and press the button or right arrow button to

enter the menu.

4. Press the left/right arrow buttons to select the Date/

Time to be adjusted: Time is displayed in yyyy:

MM:dd HH:mm.

5. Press the up/down arrow buttons to press the value

for your selected block. After you finish your

settings, press the button to confirm.

6. Press the button and the following snapshot

screen appears.

MODE OVERVIEW

Press the button to display the settings: Classic,

Full, Off.

Classic: Displays the camera parameters on screen

-0.3 EV 400 ISO

1234

16M

00:56:00

Full: Camera parameters with Grid and Histogram

-0.3 EV 400 ISO

1234

16M

00:56:00

Off: Does not display any additional icons on screen

Display Setting

16M

-0.3

F3.3 400

ISO

1234

00:56:00

1. Shooting mode

2. Macro mode

3. Self-timer

4. Zoom display (Visible when pressing the zoom

button)

5. SD memory card/Built-in memory

6. Battery status

7. White balance (Adjustable in mode)

8. Color effect (Adjustable in mode)

9. Number of remaining shots

10. Image size

11. Video quality

12. ISO value (Adjustable in mode)

13. Remaining recording time

14. Exposure compensation (EV value)

(Adjustable in mode)

15. Focus frame

16. Shutter speed

17. Histogram

18. Aperture value

19. Continuous shot

20. Flash mode

21. AF mode

LCD Display

Overview of the Screen Icons in Photo Shooting Mode

Overview of the Screen Icons in Movie Mode

-0.3 EV

00:56:00

1. Movie mode

2. Macro mode

3. Zoom display (Visible when pressing the zoom

button)

4. SD memory card/Built-in memory

5. Battery status

6. Remaining recording time

7. Video quality

8. Exposure compensation (EV value)

9. Focus frame

10. Self-timer

11. AF mode

For optimal video shooting, it is recommended

that an SDHC memory card be used. If you shoot

video using only the camera's internal memory, the

end results may have image jitter, noise and vastly

shorter recording times.

15:37

1/45

00:01:23 2015 04-01

1. Film file

2. DPOF file

3. File protection

4. Memory space (indicating the current number of

photos and total number of photos)

5. SD memory card/Built-in memory

6. Battery status

7. Slide setting/Film playing

8. Zoom magnification area

9. Shooting date

10. Film length/Number of photos with burst shooting

11. Video quality

12. Red-eye reduction

Overview of the Screen Icons in Playback Mode

This camera provides a convenient mode button that allows you to manually switch among different camera settings with

ease. Available modes are listed below:

Mode Name Icon Description

Manual Mode Many of the camera settings can be configured manually in this mode.

Auto Mode In this mode, the optimal conditions for taking pictures will be set based on the subject and

environment. It is the most commonly used mode for taking pictures.

Movie Mode Record videos.

Panorama Mode In this mode, up to 4 frames can be stitched together to create a single panoramic photo.

Scene Mode Choose from 23 different pre-set scene types and effects for your photos.

Using the Mode Button

Auto Mode is the easiest mode to take photos. While

operating in this mode, the camera automatically

optimizes numerous camera settings to adjust your

photos and videos for the best possible results.

Follow these steps:

1. Press button to select Auto Mode ( ).

2. Compose your picture in the LCD and press the

shutter button halfway down to focus on the subject.

3. The LCD will show a green focus frame when the

subject is in focus.

4. Fully press the shutter button down to take pictures.

Auto Mode Manual Mode

When selecting (Manual Mode) , you can set EV/

ISO.

1. Press button to select Manual Mode , press

to confirm.

2. Press the button.

-0.3 EV 400 ISO

3. Press the left/right arrow buttons to select an

adjustment setting.

4. Press the up/down button to adjust the

parameters.

5. Press the button to confirm the settings and enter

the shooting screen.

With Panorama Mode, you can take a series of pictures

which will be stitched automatically into an ultra-wide

panoramic picture by the camera.

Follow the steps below:

1. Press button to select Panorama Mode ( ).

2. Use the left/right buttons to specify the direction of

picture taking, and then in 2 seconds the panoramic

sequence will commence automatically.

3. Compose the first view of the panoramic picture on

the LCD and press the shutter button to capture the

image.

Save

Cancel

Cancel Save

1/50F3.3

4. After the first shot is taken, the semi-transparent

image of the first shot will appear at the edge of the

screen. You can use this image to compose your

picture before you press the shutter button to capture

and finish manual stitching.

5. If continuous pictures are less than 4 shots, press

the button and the camera will stitch the pictures

automatically. Press the playback button to enter

playback mode to see the effect.

6. If you take 4 pictures, the camera will automatically

stitch the pictures. Press the playback button to enter

playback mode to see the effect.

Flash Mode, Self-timer, Macro Mode, and Exposure

Compensation are all disabled in Panorama Mode.

In Montage mode, up to 4 photos can be captured

when the image size is set at 2MP.

Panorama Mode

You can select an appropriate mode from the 23 scene modes according to the type of environment you are shooting. The

camera then configures the most appropriate settings automatically.

Press button to select mode. Press the arrow buttons to select a scene, and press the button to confirm.

Scene Description

Auto Scene Identifies the scene automatically; Portrait, Backlit Portrait, Landscape, Macro, Night

Landscape, Night Portrait, Auto.

Landscape For landscapes and outdoor shots. Vivid reproduction of green and blue.

Sport For fast-moving subjects. Capture sharp, action shots with minimal blur. This mode is not

recommended for shooting indoors.

Beach For taking pictures in areas with strong sunlight.

Sunset For sunsets. Capture subjects in strong sunlight.

Fireworks For fireworks at night. Suggest using tripod.

Night Landscape For night scenes. Suggest using tripod.

Snow For snow scenes. Reproduce natural, clear white scenes.

Children Turns off flash automatically. Avoids disturbing subject, suitable for taking photos of

children.

ID For shooting ID size photos. (It is recommended to print using 6-inch 4R (6X4)

photographic paper).

Scene Mode

Scene Description

Glass For objects behind transparent glass.

Photo Frame For adding interesting frame effects to the photo.

Panning Shot Suitable for capturing fast moving objects to have a clear subject with a blurred background.

Text For taking pictures of text, documents or white boards.

Portrait Most suitable for capturing people with focus on their face.

Fish Eye For interesting fish eye effect.

Party Suitable for taking indoor party pictures, even under the complicated lighting conditions.

Indoor For indoor settings. Reduce blur and improve color accuracy.

Leaf For plants. Capture brilliant shots of greenery and blossoms.

Museum For museums or flash-free areas. Retain color and reduce blur.

Night Portrait For portraits against night scenery.

Sketch For taking photos with pencil sketch effect.

Anti-shake Digital image stabilization to take clear pictures in the handheld state.

Auto Scene Mode

In scene mode, the camera can detect different environments intelligently

and automatically select the best scene and photo settings for you.

1. Press button to select mode, then select function.

2. Hold the camera steadily and aim at the subject. The optimum scene mode

will be selected automatically.

3. Press the shutter button half-way down to focus.

4. Press the shutter button all the way down to take pictures.

Mode Name Description

Landscape Mode For landscapes, ASCN will automatically adjust the exposure and reproduce vivid green

and blue colors.

Portrait Mode Most suitable for capturing people with focus on their faces.

Night Portrait When you take portraits at night, or in low light conditions, ASCN will automatically adjust

the exposure for people and night scenes.

Backlit Portrait When the sun or any other light source is behind you, ASCN will automatically adjust the

foreground exposure to produce the best pictures possible.

Night Landscape

Mode

For night scenes, ASCN will automatically increase the ISO value to compensate for low

light.

Macro Mode To produce more detailed close-ups, ASCN will automatically engage the camera's Macro

Mode and automatically focus the lens.

Auto Mode The camera will automatically adjust the exposure and focus to ensure the best possible

pictures.

1234

16M

Flash Mode

The Flash is used to illuminate a subject in low light or for

fill-in lighting to achieve better illumination of a subject

with pronounced shadows.

1. Press the right arrow button ( ) to enter the Flash

Settings Menu.

Flash Auto

2. Press the left/right buttons to select the following 6

modes:

• Force Off

Flash is turned off.

• Flash Auto

Camera flash goes off automatically based

on existing light conditions.

• Fill Flash

The flash will engage with each shot even

if there is enough available light to take the

photo without flash.

• Slow Sync.

This allows for night scenery photos that

include people in the foreground. The use of

a tripod is recommended when shooting with

this setting.

• Slow Sync. + Red-Eye

Use this mode for slow synchro shots with

red-eye reduction.

• Red-Eye Reduction

The camera emits a brief pre-flash before the

picture is taken to reduce red-eye effects.

3. Press the button to confirm the settings and exit

the option.

BASIC OPERATION

Macro Mode

The Macro Setting is ideal for shooting small objects

or close-up photos. This mode allows you to focus on

subjects very close to the camera.

1. Press the left arrow button ( ) to enter the Marco

Menu.

Macro On

2. Press the left/right buttons to select the following 2

modes:

• Macro Off

Select this option to disable Macro.

• Macro On

Select this to focus on subjects 5cm from the

lens.

3. Press the button to confirm the settings and exit

the menu.

Self-timer Setting

Use this function to take pictures at pre-set intervals.

The camera shutter speed can be set for 2 seconds, 10

seconds or by smile detection.

1. Press the left arrow button ( ) to enter the Marco

Menu.

Self-timer 10sec

2. Press up/down buttons to enter Self-timer function

menu.

3. Press left/right buttons to select the following 4

modes:

• Self-timer Off

Disables the Self-timer.

• Self-timer 2sec

A single picture is shot 2 seconds after the

shutter button is pressed.

• Self-timer 10sec

A single picture is shot 10 seconds after the

shutter button is pressed.

• Self-timer Smile

Press the shutter button and a picture will be

taken immediately after a smile is detected.

4. Press the button to confirm the settings and exit

the menu.

The adjustable range of exposure value is from EV

-2.0 to EV+2.0.

The ISO function allows you to set the sensitivity of

the camera's light sensor based on the brightness

of the scene. To improve the camera's sensor

performance in darker environments, a higher ISO

value is required. A lower ISO value is needed when

shooting in brighter conditions. Pictures taken at

higher ISO settings will generally have more noise

than those taken at lower ISO settings.

The camera's ISO settings include: Auto, 80, 100,

200, 400, 800 and 1600.

EV function menu of the camera consists of EV

adjustment (Adjustable in mode) and ISO

adjustment (Adjustable in mode). With proper

function setting, the user can take pictures with better

effects.

-0.3 EV 400 ISO

-0.3 EV 800 ISO

Please refer to manual mode on page 25 for EV

setting operation steps.

EV Setting

Your camera is equipped with two types of zoom

functions: optical zoom and digital zoom. Press the zoom

button of the camera to zoom in or out on the subject

while taking pictures.

-0.3 EV 400 ISO

1234

16M

00:56:00

When reaching the critical point of optical/digital zoom,

the camera will temporarily stop zooming; if you release

and press the zoom button again, it will automatically

switch between optical and digital zoom.

Zoom Indicator

Using the Zoom Function Using Quick Recording

In shooting mode, press the fast video recording button

to begin recording video.

00:00:06

After finishing, press the fast video recording button

or the shutter button to stop and store the video. The

camera will return to shooting mode automatically.

To view the captured photos and video clips on the LCD:

1. After pressing the button, the last photo or video clip taken will be displayed on the LCD.

2. Use the left/right arrow buttons to scroll through the photos or video clips stored in the internal memory or on the SD

memory card.

3. To play a selected video clip, press the button to enter the movie playback Mode.

During video playback, the operating instructions will appear on the screen. Press the appropriate buttons to engage the

following actions:

6 Back to the beginning of the video

7 Play

8 Play video forward

9 Cancel playback

10 Play video backward

1 Increase volume

2 Pause

3 Fast forward

4 Decrease volume

5 Rewind

00:00:47 00:01:23

Mute

Viewing Photos and Videos

PLAYBACK

When in playback mode, press the button on the zoom button to display thumbnail images of photos and videos on

the screen.

1. Slide the zoom lever to switch between 3x3 and 4x4 thumbnails.

2. When a 3x3 or 4x4 thumbnail is displayed, press the arrow buttons to select a picture or video clip to view.

If the indicator appears on the LCD, then a movie file is currently being displayed.

Press the button to restore a preview icon to its original image size.

Thumbnail View

Using Zoom Playback (for still pictures only)

When playing back photos, you can also use the Zoom Button to zoom in on the photos 2 to 8 times.

1. Press the left/right button to select a picture to be zoomed in.

2. Press the button on the zoom button to zoom in.

3. The bottom right corner of the screen will display the number of times and area of the photo zooming operation.

4. Press the arrow buttons to navigate and select a part of the image to be zoomed in.

5. Press the button to return the image to its original scale.

Movie images cannot be magnified.

This setting allows you to view all the stored pictures as a slideshow.

1. Press the button to enter playback screen.

2. Press the button to enter slide option.

3. Press the left/right buttons to select slideshow playing or 「Cancel」 to return to the playback screen.

Cancel

4. Press the button to confirm the setting.

Slideshow

In playback mode, press the down arrow button ( ) to select your photos and videos.

To delete photos or videos:

1. Press the button to switch to playback mode.

2. Press the left/right arrow buttons to select the photos and videos to be deleted.

3. Press the down arrow button ( ) and the deletion screen is displayed.

Delete One

Exit

4. Press the up/down arrow buttons to select「Delete One」or「Exit」and press the button to confirm.

Erased photos/video clips cannot be recovered.

Photos and Video Deletion

Image Size

The size setting refers to the image resolution in pixels. A

higher image resolution allows you to print that image in

larger sizes without degrading the image quality.

16M

Size: High quality printing

The bigger the number of recorded pixels is, the

better the image quality becomes. As the number

of recorded pixels lessen, you will be able to record

more images on a memory card.

Mode:

1. In Photo Shooting Mode, press the button to

enter the Photo Shooting Menu.

2. Press the up/down arrow buttons to select the Photo

Shooting Menu to be set.

3. Press the left/right arrow buttons to select the Photo

Shooting Menu to be set and press the button to

confirm.

16M

Size: High quality printing

Refer to the following pages for more details about each

setting.

Photo Setup Menu

USING THE MENUS

Cont. AF

Enable the continuous AF to be able to continuously

focus automatically when taking pictures.

16M

Cont. AF:Off

Cont.AF: Off

There are 2 options:

• Off

• On

Setting Continuous AF to On will reduce battery

life.

Continuous Shot

Use this setting to perform continuous shooting.

16M

Single

There are 2 options:

• Single

• Continuous Shot

Press the shutter button to start continuous

shooting.

Focus Setting

In different photo shooting modes, you can select

different focus methods.

16M

Single-AF

There are 2 options:

• Single-AF: The focus frame appears on the center

of the LCD to focus on the subject.

• Multi-AF: The camera automatically focuses the

subject in a wide area to find the focus

point.

Color Effect

This setting allows you to select different modes for

optimum focus.

Normal

There are 4 options:

• Normal

• Vivid

• Sepia

• Black and White

White Balance Setting

The White Balance Setting allows you to adjust the color

temperature for different lighting sources to ensure the

most accurate color reproduction.

AWB

There are 7 options:

• AWB

• Daylight

• Cloudy

• Fluorescent

• Fluorescent CWF

• Incandescent

• Manual WB (Fully press the shutter button to

detect the white balance value)

Scene

Select the scene mode under the SCN mode.

Night Landscape

Press SET To Select Scene

Night Landscape

• Shooting menu in the shooting mode (O: Optional X: Not optional)

Options

Shooting Modes

Image Size O O X O

Cont. AF O O X X

Continuous Shot O O X X

Focus Setting O O X X

Color Effect O X X X

White Balance Setting O X X X

Scene X X X O

Mode:

1. Press the button in Photo Shooting Mode and

press the up/down button to select .

ਘ⥺गٵ੫

Press SET To Enter

Press SET to Enter

2. Press the button to enter the menu.

3. Press up/down arrow buttons to select , and

press the button or right arrow button to enter the

menu.

4. Press the up/down arrow buttons to select the item

to be set and press the button or right arrow

button to enter the menu.

5. Press the up/down arrow buttons to select an option

and press the button to confirm.

Quality

The Quality Setting can be used to adjust the image

compression ratio.

There are 3 options:

• Best (16M Average File Size: 4.0MB)

• Fine (16M Average File Size: 2.5MB)

• Normal (16M Average File Size: 2.0MB)

Photo Shooting Setting Menu

AF Assist Beam

In a darker environment, AF Assist Beam can be turned

on for better focus.

There are 2 options:

• Off

• On

Digital Zoom

Turn on or off the digital zoom.

There are 2 options:

• Off

• On

Date Imprint

Include a Date/Time stamp on the photo image.

There are 3 options:

• Off

• Date

• Date / Time

Quick Review

This option allows quick review of the photos

immediately after they are taken. Each photo is displayed

on the LCD based on the selected time.

There are 4 options:

• Off

• 1 sec

• 2 sec

• 3 sec

A shorter quick review time will improve battery

life.

Video Quality

Set the image resolution used during video recording.

Size: 720p 30fps

The speed requirements for reading and writing high image

pixel images to SD card are as follows:

No. Image Pixel Frame Recommendation

Recording

time (4GB)

About

11280x720 * 30 Class 4 15 minutes

2 1280x720 15 Class 4 31 minutes

3 640x480 30 Class 4 47 minutes

4 320x240 30 Class 4 200 minutes

* The longest recording time is 29 minutes at one

time.

Mode:

1. Press the button, select the mode and press

the button to enter the Movie Menu.

Size: 720p 30fps

2. Press the up/down arrow buttons to select the

Movie Menu to be set.

3. Press the left/right arrow buttons to select the

Movie Menu to be set and press the button to

confirm.

Movie Menu

Mode:

1. Press the button, select the mode and press

the button to enter the Movie Menu.

2. Press the up/down arrow buttons to select , and

press the button to enter the menu.

Press SET To Enter

Press SET to Enter

3. Press up/down arrow buttons to select , and press

the button or right arrow button to enter the menu.

4. Select the items to be set and press the button or

the right arrow button to enter the menu.

5. Press the up/down arrow buttons to select an option

and press the button to confirm.

Digital Zoom

Turn on or off the digital zoom.

There are 2 options:

• Off

• On

Movie Setting Menu

Playback Menu

1. Press the button to display the playback screen and press the button to enter the menu.

2. Press the up/down arrow buttons to select the playback to be set and press the button to enter.

3. Press the left/right arrow buttons to select an option and press the button to confirm.

Red-Eye Reduction

Press SET to confirm

Refer to the following pages for more details about each setting.

Rotate

You can use this setting to change the orientation of the

picture.

Turn Right

There are 3 options:

• Turn Right

• Turn Left

• Cancel

Videos and panoramic pictures cannot be rotated.

The rotated picture file will replace the original

photo.

Red-Eye Reduction

Use this setting to remove red eye in your photos.

Red-Eye Reduction

There are 2 options:

• Red-Eye Reduction

• Cancel

1. Press the button to show the playback screen, press the button, and press the up/down button to select .

2. Press the button to enter the menu.

Press SET To Enter

Press SET to Enter

3. Press up/down arrow buttons to select , and press the button or right arrow button to enter the menu.

4. Press the up/down arrow buttons to select the item to be set and press the button or right arrow button to enter

the menu.

5. Press the up/down arrow buttons to select an option and press the button to confirm.

Refer to the following pages for more details about each setting.

Playback Setting Menu

Protect

To prevent any pictures or videos from being accidentally

erased, use this setting to lock one or all of the files.

There are 3 options:

• One: Lock the selected photo or video if they are

unprotected; unlock the selected photo or

video if they are protected.

• All: Lock all photos or videos.

• Reset: Cancel all locked photos or videos.

Delete

You can delete one or all photo/video files.

There are 2 options:

• One: Delete one photo or video.

• All: Delete all photos or videos.

The indicator means a file is protected. File

protection must be removed first before a file can

be deleted.

Deleting files will cause DPOF settings to be reset.

DPOF (Digital Print Order Format)

The DPOF feature allows you to compile and select a

group of pictures that you would like to print and will

save your selection on the memory card so that you

can use the SD memory card to print without having to

individually specify the photos you want to print.

There are 3 options:

• One

• All

• Reset

The printer that supports DPOF is needed for

printing.

Trim

The Trim Setting allows you to crop photos and save

them as new pictures.

1. Press the up/down arrow buttons to select「Trim」

and press the button or right arrow button to

enter the menu.

2. Select「Yes」to confirm trim. Select a part to be

trimmed using the zoom lever and arrow buttons to

trim a photo.

3. Press the button and the「Save change?」prompt

appears. Select「」to change and save the

picture. Select「」to cancel changes and return

to the trim prompt screen.

The image cannot be clipped/trimmed again once

it has been clipped to 640X480.

Setup Menu

1. Press the button in any mode and press the up/down button to select .

2. Press the button to enter the menu.

3. Press up/down arrow buttons to select , and press the button or right arrow button to enter the menu.

4. Press the up/down arrow buttons to select the item to be set and press the button or right arrow button to enter

the menu.

5. Press the up/down arrow buttons to select an option and press the button to confirm.

Refer to the following pages for more details about each setting.

Power Saver

This setting allows you to save power and get the

maximum possible running time for your camera's

batteries. Follow the steps below to turn the LCD and

camera off automatically after a consecutive period of

inactivity.

1. Select「Power Saver」in the basic settings menu.

Press the button or right arrow button to enter the

menu.

2. Press the up/down arrow buttons to select an option.

3. Press the button to confirm.

Sound Settings

To change this setting:

1. Select「Sound Settings」in the basic settings menu.

Press the button or right arrow button to enter the

menu.

2. Press the left/right arrow buttons to select an option.

3. Press the button to confirm.

Language

Refer to the “Reset your language” section on page 18.

World Time

The Zone setting is a useful function for your overseas trips. This feature enables you to display the local time on the LCD

while you are abroad.

1. Select「World Time」in the basic settings menu. The World Time screen appears.

2. Press the up/down to select the departure place ( ) and destination ( ) fields.

3. Press the left/right arrow buttons to select a city located in the same time zone as that of the field. Press the

button to confirm settings.

Date & Time

Refer to the “Reset Date/Time” section on page 19.

5. If you select「Ye s 」the camera formats its memory.

If there is no memory card in the camera, the built-

in memory will be formatted; if there is a memory

card, it will be formatted only.

Format

Please note: formatting enables you to delete all contents

in the memory card and built-in memory, including

protected photo and movie files.

To use this setting:

1. Press the button, press the up/down arrow

buttons to select and press the button to enter

the menu.

2. Press up/down arrow buttons to select and press

the button or right arrow button to enter the

menu.

3. Press the up/down arrow buttons to select「Format」

and press the button or right arrow button to enter

the menu.

4. Press the up/down arrow buttons to select「Yes」or

「No」and press the button to confirm.

File / Software

Copy to Card

Use this setting to copy the files stored in the internal memory to an SD memory card.

1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu.

2. Press up/down arrow buttons to select and press the button or right arrow button to enter the menu.

3. Press the up/down arrow buttons to select「Copy to Card」and press the button or right arrow button to enter

the menu.

4. Press the up/down arrow buttons to select「Yes」or「No」and press the button to confirm.

If there is no card available in the camera, this function will not be displayed.

File Numbering

After you take a picture or video clip, the camera will save it with a sequential number. You can use this to reset the file

numbering to 1.

1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu.

2. Press up/down arrow buttons to select and press the button or right arrow button to enter the menu.

3. Press the up/down arrow buttons to select「File Numbering」and press the button or right arrow button to enter

the menu.

4. Press the up/down arrow buttons to select「Yes」or「No」and press the button to confirm.

Reset

Use this setting to restore the camera to its original factory default settings.

1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu.

2. Press up/down arrow buttons to select and press the button or right arrow button to enter the menu.

3. Press the up/down arrow buttons to select「Reset」and press the button or right arrow button to enter the menu.

4. Press the up/down arrow buttons to select「Yes」or「No」and press the button to confirm.

FW Version

Use this setting to view the current camera firmware version.

1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu.

2. Press up/down arrow buttons to select and press the button or right arrow button to enter the menu.

3. Press the up/down arrow buttons to select「FW Version」and press the button or right arrow button to enter the

menu.

4. When there is a new firmware version in the SD card, select「Ye s 」to update.

Connecting to a Computer

CONNECTIONS

You can use a micro USB cable to connect the camera and copy (transmit) photos to a computer, printer or other device.

Setting the USB Mode

The camera’s micro USB port can be set to connect with either a computer or a printer. The following steps will allow you

to ensure that the camera is correctly configured to connect with a PC.

1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu.

2. Press up/down arrow buttons to select and press the button or right arrow button to enter the menu.

3. Press the up/down arrow buttons to select「USB」and press the button or right arrow button to enter the menu.

4. Press the up/down arrow buttons to select「PC」and press the button to confirm.

Transferring files to your computer

The computer will automatically detect the camera as a removable drive. Double-click the My Computer icon on the

desktop to locate the removable drive and to copy folders and files in the drive to a directory on your PC as you would

copy any typical folder or file.

Follow the steps below to connect the camera to a computer.

1. Make sure both the camera and computer are turned on.

2. Connect one end of the supplied micro USB cable to the micro USB port on your camera.

3. Connect the other end of the cable to an available USB port on your computer.

4. After the transmission is complete, disconnect the micro USB cable according to the instructions specifying how to

safely remove USB devices.

Video System

Use this feature to switch the video system from either NTSC or PAL.

1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu.

2. Press up/down arrow buttons to select and press the button or right arrow button to enter the menu.

3. Press the up/down arrow buttons to select「TV-System」and press the button or right arrow button to enter the

menu.

4. Press the up/down arrow buttons to select「NTSC」or「PAL」and press the button to confirm.

The video output system would change accordingly based upon the changes of the selected language.

NTSC: English, Chinese (Traditional), Japanese, French, Korean, Russian, Vietnamese, Greek, Hungarian

PAL: German, Spanish, Italian, Chinese (Simplified), Portuguese, Swedish, Danish, Finnish, Indonesia, Norwegian,

Dutch, Turkish, Polish, Thai, Croatian, Czech, Arabic, Hindi

PictBridge technology allows printing of the

photos saved in the memory card by the

printer.

To find out if a printer is PictBridge

compatible, simply look for the PictBridge logo on the

packaging or check the owner's manual for specifications.

With the PictBridge function on your camera, you

can print the captured photos directly to a PictBridge

compatible printer using the supplied micro USB cable,

without the need for a PC.

Setting the USB Mode

The camera’s micro USB port can be set to connect with

either a PC or a Printer, the following steps will ensure

that the camera is correctly configured to connect with a

Printer.

1. Press the button, press the up/down arrow

buttons to select and press the button to enter

the menu.

2. Press up/down arrow buttons to select and press

the button or right arrow button to enter the

menu.

3. Press the up/down arrow buttons to select「USB」

and press the button or right arrow button to enter

the menu.

4. Press the up/down arrow buttons to select「Printer」

and press the button to confirm.

After the camera is reset, it will switch to PC mode

automatically from USB mode.

See “PictBridge“ section on page 68.

Connecting to a PictBridge Compatible Printer

Connecting to your Printer

1. Make sure both the camera and printer are turned on.

2. Connect one end of the supplied micro USB cable to

the micro USB port on your camera.

3. Connect the other end of the cable to the USB port on

the printer.

If the camera is not connected to a PictBridge compatible

printer, the following error message will appear on the

LCD.

The error message above will also appear if the

USB mode is set incorrectly, in which case you

should disconnect the USB cable, check the USB

mode settings, ensure that the Printer is turned on,

and then try connecting the micro USB cable again.

After setting the USB mode to Printer, the PictBridge Menu will appear.

Press the up/down arrow buttons to select a menu item and press the button or right arrow button to enter the item.

Refer to the following sections for more detailed information on each setting.

Using the PictBridge Menu

Print (with Date)

If you have set the date and time on your camera, the

date and time will be recorded and saved with each photo

you take.

1. In the PictBridge menu, select「Print (with Date)」

and the screen as shown below appears.

2. Press the left/right arrow buttons to select a photo to

be printed.

3. Press the up/down arrow buttons to select the

number of copies for the currently displayed photo.

4. Press the button and the following screen will

appear.

5. Select「Yes」and press the button to confirm;

select「Cancel」and press the button to cancel

printing.

Print (without Date)

Use this setting to print the photos without dates on

them.

1. In the PictBridge menu, select「Print (without

Date)」and the screen as shown below appears.

2. Press the left/right arrow buttons to select a photo to

be printed.

3. Press the up/down arrow buttons to select the

number of copies for the currently displayed photo.

4. Press the button and the following screen will

appear.

5. Select「Yes」and press the button to confirm;

select「Cancel」and press the button to cancel

printing.

Print Index

You can print all photos in the camera via this function.

1. In the PictBridge menu, select「Print Index」and the

screen as shown below appears.

2. Select「Yes」and press the button to confirm;

select「Cancel」and press the button to cancel

printing.

Print DPOF Images

To use DPOF printing, you must select your photos for

printing using the DPOF settings beforehand. See “DPOF”

section on page 54.

1. In the PictBridge menu, select「Print DPOF Images」

and the screen as shown below appears.

2. Select「Yes」and press the button to confirm;

select「Cancel」and press the button to cancel

printing.

Exit

Select「Exit」to exit the PictBridge menu. At this time, the message「Remove USB Cable!」appears on the screen.

Disconnect the micro USB cable from the camera and printer.

Specifications

APPENDICES

Design and specifications are subject to change without notice.

Image

Sensor

Type 1/2.3"CCD

Effective ective Pixels 16.15 Megapixels

Total Pixels 16.44 Megapixels

Lens

Focal Length 4.9mm (Wide) — 19.6mm (Tele)

35mm film equivalent 27mm (Wide) — 108mm (Tele)

F number F3.0 (Wide) — F6.6 (Tele)

Lens Construction 7 groups 7 elements

Optical Zoom 4x

Focusing Range

Normal: (Wide) 60cm ~ ∞,

(Tele) 100cm ~ ∞;

Macro: 5cm ~ ∞ (Wide Only)

Autofocus System TTL Autofocus

Anti-Handshake Digital Image Stabilization

Digital Zoom 6x Digital Zoom (Combined Zoom: 24x)

Number of

Recording

Pixels

Still Image

(4:3)

16MP: 4608 X 3456

10MP: 3648 X 2736

5MP: 2592 X 1944

3MP: 2048 X 1536

0.3MP: 640 X 480

(3:2)

14MP: 4608 X 3072

(16:9)

12MP: 4608 X 2592

2MP: 1920 X 1080

Movie 1280 X 720 (15/30fps), 640 X 480 (30fps), 320 X 240 (30fps)

Image Compression Best, Fine, Normal

DCF, DPOF (Ver1.1) Support Yes

File Format

Still Image Exif 2.3 (JPEG)

Movie Movie Format: MOV (Motion JPEG), Audio: G.711 [Monaural]

Shooting Modes

Auto Mode, Manual Mode, Panorama Mode, Scene Mode (Auto Scene,

Landscape, Sport, Beach, Sunset, Fireworks, Night Landscape, Sketch, Snow,

Children, ID, Glass, Photo Frame, Panning Shot, Text, Portrait, Fish Eye, Party,

Indoor, Leaf, Museum, Night Portrait, Anti-shake), Movie Mode

Detection Features Face, Smile, Blink

Red-Eye Removal Yes

Panorama Capture Up to 180° (Horizontal)

LCD Display 2.7 inch (230k Pixels)

ISO Sensitivity Auto, ISO80/100/200/400/800/1600

AF Method Single AF, Multi-AF (TTL 9-point), Face-Detection

Exposure Metering Method Artificial Intelligence AE (AiAE), Face AE

Exposure Control Method Program AE (AE-Lock Available)

Exposure Compensation ±2EV in 1/3 Step Increments

Shutter Speed 1/2000 ~ 4 Seconds

Continuous Shooting Ye s

Playback Modes

Single Photo, Index (9/16 Thumbnails), Slide Show

Zoom in (2 to 8 times)

White Balance Control AWB, Daylight, Cloudy, Fluorescent, Fluorescent CWF, Incandescent,

Manual WB

Flash

Flash Method Internal

Flash Modes Force Off, Flash Auto, Fill Flash, Slow Sync., Slow Sync. + Red-Eye,

Red-Eye Reduction

Recording Media

Internal Memory: Approx. 8MB

SD/SDHC Card (Up to 32GB Support)

[MMC Card Not supported ]

PictBridge, ExifPrint Support Yes

Multi-Language Support 27 Languages

Jacks AV-OUT/USB 2.0 (Micro 5 pin USB)

Power 2 x AA Alkaline Battery,

AA NiMH Battery [Not Included]

Shooting Capability

(Battery Performance)

AA Alkaline Batteries: Approx. 120 shots

(Based on CIPA standards)

Operation Environment Temperature: 0 ~ 40 °C, Humidity: 0 ~ 90%

Dimensions (W X H X D) Approx. 93.0 X 60.2 X 26.6mm

(Based on CIPA Standards)

Weight Approx. 117g (Body only)

Prompts and Warning Messages

Message Description Action

Warning! Battery exhausted.

The camera battery is used up. It is a warning

indicating that the camera is going to shut

down.

Replace with new batteries. The

camera will shut down in 2 seconds.

Lens obstruction, Re-start

Camera.

The lens is jammed or some foreign object is

preventing the lens from functioning properly.

Turn off the camera and restart it to

reset the lens.

Suggest using tripod.

When continuous exposure is enabled, this

prompt message is displayed when the photo

shooting screen is displayed for the first time.

The message will disappear after 2

seconds

Built-in memory error! An error occurs in internal memory.

Try shutting down the camera and

turning it on again. The message will

disappear after 2 seconds

Warning! Do not turn off your

camera during update!

The message appears during the firmware

update process.

The message disappears after the

camera update and restart.

Message Description Action

Connection Failed! Failure to connect to your PC, printer, TV Remove micro USB cable and retry

connection

Write Protect ! The SD card is locked.

Remove SD card and switch the lever on the

side of card to UNLOCK. The message will

disappear after 2 seconds.

Card Full ! Indicates that the SD card is full.

Replace SD card with another that has

available memory. The message will

disappear after 2 seconds.

Memory Full ! Indicates that the camera memory is full. It disappears after 2 seconds.

Card Error ! During power-on, the SD card cannot be

recognized or a read/write error occurs.

Format the SD card. WARNING: Formatting

the SD card will erase all data on the card.

Copy the data from the SD card to another

storage, such as a computer. Otherwise, all

data will be erased after the format. The

message will disappear after 2 seconds.

Message Description Action

Card is not

formatted.

When an error occurs in the SD card, the

message "Not Formatted" appears.

Format the SD card. WARNING: Formatting the

SD card will erase all data on the card. Copy the

data from the SD card to another storage, such as

a computer. Otherwise, all data will be erased after

the format. The message will disappear after 2

seconds.

Slow access

When a SD card lower than Class 4 is

used to record a HD movie, the writing

speed will be slower and recording will

not continue.

Replace SD card with a higher Class over 4. The

message will disappear after 2 seconds.

Cannot write to SD

card.

The photo shooting or video

recording has been interrupted so

recording cannot continue.

Turn off the camera. Then unload and reload the

SD card and turn on the camera to retry. Also

check if SD card is full or in a locked position.

No Red-Eye

Detected!

Red eyes have not been detected in the

image. The message will disappear after 2 seconds.

This image cannot be

edited.

The file format does not support editing

or the edited file cannot be edited again. The message will disappear after 2 seconds.

Message Description Action

Exceeded

maximum folder

number.

This indicates that the SD card exceeded

the maximum number of folders (999).

This could cause a long read time during

the camera's power up.

Copy the data to your PC, format the memory card

using the camera.

Too many pictures

for quick

processing.

During the playback by date, the

images exceed specifications so that it is

not possible to play by date.

The message disappears after 2 seconds and the

camera returns to the normal playback mode.

Unable to recognize

files.

The format of the file to be viewed is not

supported or the file is corrupted so it

cannot be properly read.

This image message disappears only after the file

is deleted.

No Picture!

When you press the play button, no

image files exist in the camera or

memory card.

The message disappears 2 seconds later to return

to the photo shooting screen.

Protected!

Undeletable!

The file is protected. The message

appears when you delete it.

Remove SD card and switch the lever on the side

of card to UNLOCK. Place back into the camera

and try again. The message will disappear after 2

seconds.

Troubleshooting

Problem Possible causes Solution

Camera does not turn on

The battery has been

depleted.

The battery is not inserted

correctly.

Recharge the battery.

Correctly reinstall the battery.

Camera turns off suddenly

during operation

The batteries have been

depleted. Recharge the battery.

The picture is blurred Camera shakes while taking a

picture. Turn on OIS feature.

Images and video files cannot be

saved

The SD memory card is full.

The memory card is locked.

Use another memory card or delete

unnecessary files.

Unlock the memory card.

Images will not print from the

connected printer

The camera is not connected to

the printer correctly.

The printer is not PictBridge

compatible.

The printer is out of paper or ink.

The printer paper is jammed.

Check the connection between the

camera and printer.

Use a PictBridge compatible printer.

Load paper into the printer or replace

the ink cartridge in the printer.

Remove the jammed paper.

Problem Possible causes Solution

Saving data to memory card

is slow

Using a memory card below Class 4

may result in slower recording times.

Use an SD card with write Class higher

than 4 to improve performance.

Cannot write to the memory

card

The SD memory card has been

locked.

The camera may experience trouble

recording HD movies to SD cards

with a rating lower than Class 4.

Release the write lock of the memory

card or replace with another card.

Use an SD card with write Class higher

than 4 to improve performance.

Too many movies to

process

The number of pictures or folders

in the SD memory card exceed the

specifications, so the playback of

data folder can not be displayed.

Delete unwanted files.

Ver. 1

Licensed

Product

The Kodak trademark and trade dress are used under license from Kodak.

JK Imaging, Ltd. 17239 South Main Street, Gardena, CA 90248, USA

JK Imaging Europe, 71 Clarendon road, Watford, WD17 1DS, UK

www.kodakpixpro.com

Kodak Pixpro Fz 43 Users Manual

PixPro FZ-43 - User Manual fz43-en Free User Guide for Kodak Camera, Manual - page5

Navigation menu

Versions of this User Manual:

Views

Navigation